The thing is I need a bigger server, but at the same time I'm having problems with cpanel and centos and I'm quite bored. So now I want to migrate from my cpanel server to the plesk server keeping the domain and it's content. I tried to create a ticket in plesk support but either I didn't bought the server yet. So, what's the quickier and safest way to migrate? Is there any script?
View 1 Repliesdifference between cpanel and pleak? for which service they are being used?
View 2 Replies View RelatedCan a Fedora server be remotely managed with Plesk and/or Cpanel or only via SSH?
View 1 Replies View RelatedI have a cpanel server(not sure if that matters). I wanna transfer to another cpanel server. The size is about 3TB, I dont have enough on the hard drive to zip then transfer that way, and cpanel cant handle moving such a large migration.Been searching on the net to find an answer but everyone saying to backup then migrate. whats best tar or rsync or somthing else.
View 3 Replies View RelatedUntil today Plesk 9.3.0 works finely on my ubuntu 8.04 dedicated server. Then i tried to install proFTPd and after that Plesk chashs.
Now i want to reinstall my plest but i have a problem i get lots of error messanges like that
Quote:
How can I remove completly plesk and install it again?
Clients are not able to access FTP thru browser: ftp://IP.When you open it thru browser, it does not ask for a usename or password but shows a PUB diretory instead. I tried to telnet port 21 and shows that it is using VSFTP instead of Plesk's ProFtp.
View 1 Replies View Relatedi have a quick question about using plesk on centos 5.x server and installation of ssl certificates. if anyone out there has expertise with above,
View 1 Replies View Relatedhow can i login to a cpanel using cli?
View 1 Replies View RelatedI will expain my setup :
SERVER 1 - SHARED ACCOUNTS
SERVER 2 - RESELLER ACCOUNTS
On server 2, all of a sudden my resellers are complaining that the accounts they create are not working, so I checked out.. and I realised that the accounts all have 'Unknown' as the IP.
So, steps I took so far...
1. Rebuilt Apache
2. Restarted the server
After each of these steps I have created new accounts, and still I have this error.
In the past I have always used Cpanel to create my web directories and databases. I would like to move away from using this panel and like to learn to create it all from the prompt.
View 5 Replies View RelatedI'm new to Linux server concept. Can anybody tell me how to create subdomain in linuAlready I have domain "x" in my server, I want to create subdomain for domain "x". How can I do it without using CPanel
View 1 Replies View RelatedIn my cpanel, it reports the RAM on my server as:
Physical used 17.31%
768MB Free (928MB Total)
yet when I use top I only have 88Mb free:
Code:
Mem: 950568k total, 862464k used, 88104k free, 91072k buffers
Swap: 522072k total, 136k used, 521936k free, 604752k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
[code]....
My wife has decided to give linux a try. I've installed Mint Linux 10 for her.Last week (bad timing) I converted her to Thunderbird. Now I have the task of moving all her mail folders and account settings from Thunderbird under Windows 7 to Thunderbird under linux.Other postings say all I have to do is copy the Windows profile directory to her home directory and rename it .thunderbird.
Doesn't work. When I start Thunderbird all it displays is a window for new account details.I tried just copying the <gibberish>.default directory across and renaming it to the one that was there. Again, no luck.Before it started using sqlite things were simple!I backed up with MozBackup, and then noticed that it only works with Windows.
We have our source codes migrated from HP-UX to LINUX REL 5. In some of the scripts, certain flags like -DHPUX -DUNIX have been use. I wanted to know, what can replace these flags in LINUX? then certain optimization flags are also used like +O2, etc. these give an error as O2:command not found in Linux. What can be the proper replacement for them?
View 1 Replies View RelatedWe planned to migrate data files in Unix to Linux. The file in Unix is in big endian data format where is linux is configured as little endian byre structure. This is causing problem in data computation.
How data can be ported to linux ( converting big endian to little endian).
How linux configured can be configured for big endian byte structure.
I'm installing OpenLDAP on a VSP server, CentOS 5 with Plesk at 1and1. I've tested the slapd.conf file with slaptest and it returns ok. I've tried to start ldap with /sbin/service ldap start and it says it is ok and starts. But if I try to run ldapadd I get an error message saying that it could not contact the ldap server. I check the status with /sbin/service ldap status and it show that it is not running. I can do /sbin/service ldap start, it will say it started and turn around and check the status and it will show that it is not running. Would something in Plesk be killing ldap as soon as it starts? I installed OpenLDAP via yum and have been following directions found in a couple of ldap guides.
View 5 Replies View RelatedI am trying to determine which version of Ubuntu we have installed on our Webfusion VPS in order to see how to update to specific php and mysql versions needed for installing some software.
uname -a gives this:
Linux [hostname] 2.6.18-028stab070.2 #1 SMP Tue Jul 6 14:34:09 MSD 2010 x86_64 GNU/Linux
I don't see anything that matches up to any of the Ubuntu releases. Is there any other way to determine what we have?
We have Plesk 9.5.2 on the machine.
Certain software we need to install requires PHP 5.2.10+ and Mysql 5.2+ but we currently have PHP 5.2.4-2ubuntu5.12 with Suhosin-Patch 0.9.6.2 and Ver 14.12 Distrib 5.0.51a
how to get the required versions of php and mysql (without breaking Plesk)? I tried editing /etc/apt/sources.list to add a new repository and using apt-get upgrade php but I probably did not add the correct repository.
I am managing a Fedora dedicated server with Plesk 9 and just recently moved the email for one of the domains on the server to Google Apps for business. Unfortunately, I cannot get email messages from the website forms to deliver to addresses on this domain. For anyone familiar with Plesk, I have disabled mail in the hosting settings by un-checking the "Activate mail service on domain" checkbox and there are no accounts in the domain. (Other readings have indicated that this should be enough to allow mail to be directed to the appropriate server). My MX records correctly point to the google apps mail server.
I'm quite comfortable with command line, but I know almost nothing about the sendmail program or its alternatives and my attempts at researching how to set up this relay has been futile. I'm pretty sure I'm using sendmail and not qmail or anything else from what the red-hat style "alternatives" symlinks point to. I've also checked the /etc/mail/access, domaintable, mailertable, sendmail.cf, virtusertable, local-host-names, sendmail.cf, and submit.cf and most of these files are empty (except the .cf files), and the sendmail.cf and submit.cf make no reference to the domain in question.
Here is the output from a sendmail test that was was not received. (Private data omitted of course).
sendmail -v xxx@yyy.com
test email from yyy.com webserver. please ignore.
xxx@yyy.com... Connecting to [127.0.0.1] via relay...
220 my.server.com ESMTP
>>> EHLO my.server.com
250-my.server.com .....
Closing connection to [127.0.0.1]
>>> QUIT
Performing the same test and sending an email to a non-hosted domain works fine.
and it must have the ability to add domains and DNS nameservers.
View 2 Replies View RelatedWhile communicating with cpanel , they said they don't support on any NAT router based network. To host website with cpanel internet should be connected directly with modem (no router) I have a dell poweredge server and recently brought PCI modem. I have 8 IP static addresses from my ISP. cpanel as they said that they don't support networking.
View 3 Replies View RelatedIm trying to make a webserver at home. I have a static IP Address of my ISP (o2) I have built a server ( 2.8 p4HT, 2GB Ram, 500GB HDD) Just to test... But, i dont know what to do in the IP Address settings for the IPv4 ( I think thats what it is) Do i put my static IP address in my ISP gave me, or the local IP of the server ( Wich is 192.168.1.72) Im realy confused. Ive tried everything i can think of, Reinstalled the os about 40 times up to now...
View 1 Replies View RelatedI've got a dedicated server using whm/cpanel and there is a particular domain being hosted which contains a very elaborate .htaccess file which is full of mod_rewrite rules, among other things. I've been asked to try and get the contents of this .htaccess file into the httpd.conf (or some appropriate include file) to improve performance.
I've been reading this page and it's really confusing me: [url]
In the file usr/local/apache/conf/httpd.conf I see that there are two VirtualHost sections that appear to be relevant for my domain (which I'll call mydomain.com). The first listens on port 80 and the second is on 443. Seems to me that my apache directives in .htaccess would belong in this section. In the first section I see this:
Code:
In the second section I see this:
Code:
The problem with both of these is that the directory /usr/local/apache/conf/userdata does not exist, much less the full path to either of those files.
I want to Migrate my C++ Application from SuSE Linux to Red Hat Linux.What impact analysis i should do?
View 3 Replies View Relatedafter getting the ACL extension and then unpacking I try to phpize, but server comes up with the following error message:wget http://pecl.php.net/get/APC-3.0.19.tgz
tar xvfz APC-3.0.19.tgz
[Code]...
Alternatively I tried pecl install, but with same result. Whats wrong? I have looked in /usr/bin/sed and there is (of course) no file or directory named "sed". What is "sed" and how to recover? Would be nice, if you could give me an indication what to look for.
I have two servers, both running CentOS, but one running Cpanel as the control panel and the other running Webmin.
I would like to sync the web folders using rsync. However, when I sync the files from the Cpanel host the permissions look as follows:
Code:
But that doesn't work on the Webmin server which needs the following:
Code:
It seems the Cpanel install has the group as 'nobody' whilst webmin has it the same as the file owner. I can fix this by running:
Code:
But as the file transfers will be frequent, I don't want the files to be inaccessible until chown is run.
So, what I really want to know is - how can I change things on the 'webmin' server so that files with ownership owner:nobody will run?
I know this seems obvious but i'm stuck. I'm trying to install squid via the command "yum install squid" and here is the output:Quote:
Setting up Install Process
Setting up repositories
update 100% |=========================| 951 B 00:00
[code]....
I migrated from 9.10 to 10.4 during the package installation I have the error: E: resolvconf: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1 ( In italian because I install the Italian version). The problem is: the file /etc/resol.conf I can't modify or delete from all user, root also.
View 1 Replies View RelatedI have a Windows 2k server running the AD PDC. 60 desktops users and 6 Windows servers use it as a single sign on server to login. As I plan to install a Centos 5.5 server with Samba for NAS and print sharing, is it possible to migrate the PDC services to the Linux server? I want desktop users and windows servers to authenticate on the Linux server. Is this possible? I have never worked with LDAP services. Worse, should I attempt this migration, it must be completed in a very short time frame.
View 5 Replies View RelatedCan I migrate from fc12 to fc13 or do I have to do a full re-install? If I can migrate, can you point me to the instructions/working paper/etc.?
View 6 Replies View RelatedI'm in the process of testing upgrade -yes, upgrade, no fresh reinstall of my old trusty 11.2 to the unknown 11.4. One of the applications I need is VMware. I'm using vmware server, and I'm thinking of migrating to the player version, because the server is
not supported, it seems.I have installed a small test partition with 11.4, and in it I have installed VMPlayer. It looks nice (I had to install a lot of development packages, gcc, kernel-source, etc - nothing new here). Sound in the guest (I'm testing my virtual Windows Me) works; it wasn't working in the server. Nice surprise.
One missing feature is snapshots. The trick is to simply replicate all the files of the virtual machine to a backup. It is huge space wasted, 9 GB for a small machine, but it is doable. One thing I do not know how to do: VMplayer gives a notice that the virtual machine is version "Workstation 5.xx virtual machine", and that this version'x CMOS is not compatible and will use a default cmos instead. But I have not seen anywhere how to choose or change or upgrade the virtual machine type.