On my other PC I was installing updates. It's just frozen up for some reason (assume screen saver kicked and did something) What should I do to minimize any file damage? Pressing the power button may be my only option? And if I do shut it down do I just run updates again to pick up where I've left off. I'm a bit concerned I'll end up with corrupted files
View 6 RepliesJust setup 5.5 as Server-GUI installation last night. Ran latest updates today; it requested a restart; logged in to console; GUI desktop all looked normal at first, except that the panels on top and bottom are empty, except for the menu "Applications Places System" items (upper left) are there, but non-functional. The desktop icons for "Computer, Home, Trash" are functional. Update as I am writing this: The menu header items are now GONE as well, but icons still work (but don't help me).
Problem is, I don't have access to any apps that will allow me to reboot the machine with access to "Shutdown/Restart". If I hit the reset button, will it be OK? Or will it blow up like a Windows machine? Luckily I can reinstall if necessary, but the update thing might crash me again. All was fine before applying updates. Anybody having problems with the latest updates?
For some reason Update Manager is not installing updates as of yesterday.I have it set to check daily and notify if updates are available. It has been working without issues for well over a year now.
Update Manager tells me updates are available and presents the list of security, recommended, and other updates. All are selected to update, but when I select Install Updates in Update Manager it returns with a Reading Package Information window overlaid on the main Update Manager window - building dependency tree then reading state information and dumps me back to the main Update Manager window without performing any update actions.
I'm trying to upgrade from 9.10 to 10.4 on an R51 thinkpad. 9.10 was current and up to date (did that right before the upgrade). All seemed to be going well, but the system appears frozen during "installing the upgrades". At the time of the freeze, it said "about 2 hours 5 minutes remaining" that was ~5.5 hrs ago. The system is locked up, unresponsive. do I force a reboot, and hope for the best? let it sit and assume that it is doing something? The bad thing is that I missed a folder (wife's) in my backup of data prior to upgrade. So getting that back is important.
View 2 Replies View RelatedI am reinstalling ubuntu mavericks as I could not get the first install to work right. I installed from a CD that I burned. 3/4 of the way through the "installing system" process the screen went dead. The cursor does not respond nor does anything happen with the keyboard. Be aware that I don't know very many things about what a keyboard can do. The screen has been frozen for about a half hour now.
View 2 Replies View RelatedHow do i download and install updates? It says package not found.
View 4 Replies View RelatedI am having a computer attached to internet and is updating regularly using update manager. Is there any way to update the other computers which are not connected to internet?
View 1 Replies View RelatedI am running a dual boot system - Ubuntu / Win. XPI installed the security updates in Ubuntu and followed the prompt to restart the computer. Now I can't boot into Ubuntu. When I try, the machine simply restarts. I can still log into windows just fine, but Ubuntu won't load no matter how many times I try.
View 9 Replies View RelatedI know I can install updates using apt-get install updates but is there a way to check to see if updates are available without installing them?
View 4 Replies View RelatedI'm new to ubuntu I last used it 2 years ago and did not like it one bit but a friend told me about 11.04 so thought id give it a go and I absolutely love it. its far superior to windows 7 imo. now my only problem so far is when installing updates it seems to hang on applying . but im sure there should be some indication of progress.
View 6 Replies View RelatedI have a dual boot system (Compaq Presario CQ61) with Windows 7 and Ubuntu installed. A while back I updated my Ubuntu system to the 11.04. All went smoothly. Then recently, when the system prompted me, I installed some updates. Since then when I try to boot into Ubuntu I end up at a CLI with (initramfs) as the prompt.I can still successfully boot off of the Windows 7 partition.After reading a lot of articles describing similar problems, and failing to find a fix, I reinstalled 11.04.The system came up without any problems. BUT then, as usual, the system prompted me to install updates. Once I was done installing them and rebooted the computer I was back at the (initramfs) prompt.
View 1 Replies View RelatedThis is my first tryst with linux, so this might seem to be a very trivial problem: While installing updates for ubuntu 9.04, there was an unexpected crash saying that 'E:dpkg was interrupted, you must manually run sudo dpkg--configure-a' to correct the problem. When I tried to follow the instruction, it said that sudo could not be found. Is this a directory problem? If yes, how do I rectify it?
View 1 Replies View RelatedI am running Fedora 12 and I just installed several updates. Afterwards I attempted to use yum to search for a package and the command did not work. The following error message was displayed
[root@d630 ~]# yum search livecd
Fatal Python error: pycurl: libcurl link-time version is older than compile-time version
Aborted (core dumped)
I have installed Ubuntu and all is working Ok except when I try to add the suggested updates it is telling me I do not have enough free space. When I set it up I gave Ubuntu a 10GB partition but it does not seem to have worked. How can I add the suggested updates.
View 6 Replies View RelatedI recently upgraded to 9.04 and Update Manager stopped working. If I start Update Manager it will check for updates and display them but will not install the updates. I am prompted for a password but the updates are never downloaded and I get no error messages.
View 7 Replies View RelatedI'm looking to put together a script, called by a cron job on a daily (or weekly) basis, to automatically have apt-get pull down and install all updates, followed by a re-boot.
View 2 Replies View Relatedi have been running Ubuntu 10.10 for about a month or so now without any major problems and last night the update manager popped up like it does with some upgrades i needed to install. So i installed them and clicked restart to install updates. When i restarted and logged in, i clicked firefox, the loading bubble popped up and then froze (note: freezes when using transmission, empathy, and various other apps not just firefox) . I kept restarting and never made it past 5 minutes without it freezing up. So i booted into windows removed everything linux, reinstalled it, and everything worked like normal. Then did the updates again and same exact thing after restarting.
View 5 Replies View RelatedI recently installed Ubuntu 11.04 64bit to run along Winxp in a dual boot format. I have heard many good things about Ubuntu but am using it for the first time. I have used a ntfs partition of 30GB for Ubuntu. During the installation part I was asked for the size and I gave 8 GB, I read that this was recommended. There are quite a few things I would like to know.
1. What's the difference between Ubuntu software center & Synaptic software manager?
2. Can you do everything easily via the GUI?
3. My Nvidia 8800 GT works on 1440x900 on my win xp OS. Here it doesn't seem to get to that. Additional drivers window says that 173 version is active but not in use.
4. Where do all the updates/new softwares/ drivers etc get installed? I mean the path. Like in Xp I can give a path for the installation. Can I do that in here?
5. I want to install GNS 3 which is a routing simulator and have heard that Ubuntu is very stable for it.
6. How can I get desktop icons on the desktop?
7. What's the use of 4 workspaces? I mean why is it used and what are the advantages.
I tired searching the Internet but most of them just so confusing that it feels to difficult and am afraid I might break something. Plus most of the commands are in cli that I am not able to grasp.
When I try to install software updates by clicking on the red arrow "update" button, I get a final result stating the following:
Error authenticating some packages
It was not possible to authenticate some packages. This may be a transient network problem. You may want to try again later. See below for a list of unauthenticated packages.
initscripts
libavc1394-0
libtiff4
sysv-rc
sysvinit-utils
I've tried this a few times...same result over the past 10 days.
i have fedora 15 that i updated from fedora 14. i get notification that updates are 73 updates available , i click install i get this error libtool-2.4-4.fc15.x86_64 requires gcc = 4.6.0 : Protected multilib versions: flash-plugin-10.3.183.7-release.i386 != flash-plugin-10.3.162.29-1.x86_64 Protected multilib versions: libgomp-4.6.0-10.fc15.i686 != libgomp- .6.1-8.fc15.x86_64
View 8 Replies View RelatedI am trying to install the VLC which wanted me to have universe (which I don't know what it is). This is what I tried (Tips from this forum):
kholofelo@kholofelo-Compaq-Presario-CQ60-Notebook-PC:~$ %sudo apt-get update
bash: fg: %sudo: no such job
kholofelo@kholofelo-Compaq-Presario-CQ60-Notebook-PC:~$ sudo apt-get update
[sudo] password for kholofelo: Err URL
Could not connect to archive.canonical.com:80 (91.189.88.33). - connect (110: Connection timed out) Err URL
Unable to connect to archive.canonical.com:http: URL ....
I have my server configured to update automatically every night. However, updates are failing with the following message: There was a problem updating the system. The following error message was reported:
['Not installing key'] If the problem persists, manual intervention may be required. how to troubleshoot or resolve this issue?
I started using ubuntu 10.04 LTS on my Dell Studio 15 laptop. Installing ubuntu has never been this easy! I used CD which used WUBIInstaller to install Ubuntu. Then I restarted my machine and selected Ubuntu from 'OS selection screen'.
I connected to my wireless broadband in few minutes and found a pop-up of 'update manager' showing 305 new updates to be download and to be installed. I installed all updates worth 370 MB and in middle got an pop-up of GRUB telling me to configure GRUB on some path. I just selected that path and clicked on FORWARD button.Then installation of updates got over and it asked me to restart machine. I restarted machine but on OS selection screen,when i selected Ubuntu it didn't boot Ubuntu but instead machine restarted again. I'm not able to boot into Ubuntu.
I recently installed ubuntu(32-bit 10.04) alongside windows 7 in my hp laptop(64-bit).When i installed all the updates available and restarted, a blank screen came after i chose to boot ubuntu.On pressing the power button, ubuntu closing animation appeared & it shut down.Is it because of my hardware drivers not supporting some updates.Do I have to re-install ubuntu..if yes, how do i remove it?..is deleting the ubuntu partion ok..how should i know which updates can be installed..also, are there any problems in running 32-bit version on a 64-bit laptop?
View 1 Replies View RelatedI updated my kernel and rebooted my system. After a few minutes, my computer said that no hard drive operations were going on and the command line hadn't said anything else so I decided to reboot (i'm VERY impatient) and now when fedora boots,t hangs at a black command line like screen. I left it an hour to see if it would do anything - but nothing! Then i put in a few commands and it didn't respond to any of them
View 1 Replies View Relatedi'm a newbie to Fedora 12. While d/l the updates and installing I got this error. Where do I start?PS...I'm weening myself off MS so be gentle.
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
[code]....
I need to installing updates on fedora in my computer.
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
After updates and restart of debian server, my NIS is not functioning. No yptools are working, it cannot find the server. All my commands I issue on the NIS server. When I issue the command yptest, I get:
>>
century4:~# yptest
Test 1: domainname
Configured domainname is "cga.lan"
Test 2: ypbind
Can't communicate with ypbind
century4:~#
<<
rpcinfo gives:
>>
century4:~# rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100004 2 udp 899 ypserv
100004 1 udp 899 ypserv
100004 2 tcp 902 ypserv
100004 1 tcp 902 ypserv
100009 1 udp 901 yppasswdd
600100069 1 udp 904 fypxfrd
600100069 1 tcp 906 fypxfrd
100007 2 udp 913 ypbind
100007 1 udp 913 ypbind
100007 2 tcp 916 ypbind
100007 1 tcp 916 ypbind
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100021 1 udp 32795 nlockmgr
100021 3 udp 32795 nlockmgr
100021 4 udp 32795 nlockmgr
100021 1 tcp 59990 nlockmgr
100021 3 tcp 59990 nlockmgr
100021 4 tcp 59990 nlockmgr
100005 1 udp 894 mountd
100005 1 tcp 897 mountd
100005 2 udp 894 mountd
100005 2 tcp 897 mountd
100005 3 udp 894 mountd
100005 3 tcp 897 mountd
100024 1 udp 32797 status
100024 1 tcp 59863 status
century4:~#
After recently installing Linux Mint 10 I have tried to install the updates it says and everytime it tells me I have to fix broken packages first. I have been into something that tells me there is no broken packages. What can I do?
View 4 Replies View RelatedOn Windows, 99% of the time you have to restart the server after installing updates. In my brief experience with Linux, its never told me I had to. Do you ever have to restart after installing any for Linux? I'm using redhat specifically if that matters.
View 4 Replies View Related