I have a dual monitor setup and I've used Scale for a few days now, but I'm still confused about the expected ordering of the windows within the same workspace. For example, the last focused window isn't necessarily placed at a fixed spot, e.g., top left corner. It seems that if a window on my left monitor is last focused and I invoke it on my right screen, then it'd appear on the top left corner. However, if a window on my right monitor is last focused, it gets past just the last focused window on my left monitor. The last focused window on my left monitor eventually shifts to the bottom right corner.
I have just upgraded from 10.04 -> 10.10 and my 'scale' plugin is not working properly in compiz (the rest works well).I do have the effect working with "super+a, super+w" , but "edge" does not work.I can modify values via gconf, I have: "initiate_all_edge" set to "BottomLeft" but this doesnt respond.The weirdest thing is that the compiz scale options part instead of giving me 4 tabs of options -> gives this.(image below) i tried reinstalling a few times & purge compiz + install back, but result remained the same.
How can I get the scale plugin to show windows from all workspaces like I could before with 10.04 and Gnome?With Unity the scale plugin only "scales" windows that are on the current desktop/workspace.
When moving the mouse to the right side of the screen quickly, all the windows are small.Previously I was the first thing I was stopped by removing the mark from the Scale, but now stopped while still influence the rest.
I am looking for a way to place titles either on or under the previews in the Window Picker. I usually have many windows open, quite often with many of those windows being from the same program (i.e., OpenOffice Documents). I am wondering if the Scale plugin has some way of either overlaying titles when the mouse hovers over the preview, or if titles can be placed directly underneath the previews as they would be in OSX's Expose.
I am using VirtualBox with Win-XP installed which works perfectly But after doing updates in my F13 today the scale wont work in the VirtualBox in full-screen mode Initially scale works when I place the mouse in the top-left corner but it's not working now and nothing happens Ive googled and tried settings in CCSM but I really have no idea why scale doest work in VirtualBox full-screen now this is really extremely inconvenient as i cant switch back to my F13 unless I switch to windows mode in my VirtualBox.
is there a way to call Compiz' Scale plugin after the Expo plugin has be started? Basically I want it to work like on Mac OS X, where it's no problem to compine Spaces (Expo) with with Expos�'s "Show all windows" function (screenshot: [URL]).
Somehow the hot corners and the keyboard shortcuts are locked during the Expo view. Is it possible to unlock them? Or is there another Compiz plugin I can use?
On Windows, the widget set for windows is on the right and the widget order is minimise, fullscreen, close. Linux in general (And Ubuntu's themes specifically) *generally* mirrored this.On OSX, the widgets are on the left and the order is close, minimise, fullscreen.On Ubuntu 10.4 the widget set has been moved to the left hand side, but is just a move of the standard windows order. Is it possible (in a way that won't break future themes or edits, so by using the GUI preferrably but I can't find any option) to change the widget ordering?
I like the Dust Sand theme fondow borders etc, which doesn't actually show icon differences for the 3, just 3 dots. As a user of Windows and OSX as well as Ubuntu I keep finding myself clicking the wrong one as my brain just expects them to be in the OSX order when on the left (it just makes sense in my head for close to be on the outside edge, whichever side that may be, and for minimiseo come beformaximise/fullscreen when reading left-right). I realise other people may (and probably will) disagree with me on this, especially non-mac users, so it'd be preferable to be able to customise the order rather than force one or the other on people.
I am looking for a basic online ordering system that is:Web-based. Runs on LAMP, etc.Stable, reliable, etc.Open source.The end-user uses a web browser to order items from the list, quantity for each item, etc.Prints that order for the business owner.
I've published a samba share on a Ubuntu 8.10 server, and mounted the share on a windows box. For some strange reason the files are not sorted by file name (nor by any other sorting type) if I list them from the Windows command line (dir). I could always use the "dir /on" parameter, but I hope there's a way to make samba sort the files for me
I installed F12 onto a 4 disk SW RAID5 array. sda has a /boot partition and a <swap> partition and all of the rest of the storage is raided to make the / partition.
The installer listed sda as the HDD with the boot partition so I updated the MBR on sda durring install. After the reboot I was sent to a grub prompt. I could run,
grub> find /grub/stage1(hd1,0) and then grub> configfile (hd1,0)/grub/grub.conf and the system boots.
I'm not sure if this a BIOS disk ordering problem. I tried switching a few SATA cables, to try and reorder disks but I couldn't get to the grub prompt with the different configurations I tried.
Should I try copying the MBR from one disk to another? It seems like it's getting past the MBR otherwise grub wouldn't load at all, so is this a grub bug?
I am trying to help a small restaurant owner take orders via the web.Looking for a solution that:Can create the restaurant's menu.Display that menu on the restaurant's web site.Preferably, using PHP with MySQL.Take orders via that web page.Let the restaurant owner update the menu with today's specials, via the web.
I installed ubuntu 10.04 and after installing the drivers for my graphic card ATI Mobility Radeon HD4570, windows borders do not appear anymore. When I type "metacity --replace" borders come back, but I can't use compiz, also when I try to disable "Window Decoration" from the compizConfig Settings it doesn't work, it keeps always enabled. I tried this hack here [URL] but it didn't work for me (or I didn't apply it correctly, I'm new to the system).
I'm facing a bug where any time I click anywhere inside a window, it performs the function of ALT-clicking the window -- just dragging it around the screen. The only way I can do a standard click on the window is if I hold down the ALT key.
I think this is a compiz issue, since it is fixed by killing compiz. I've had this issue before, but I can't remember how I solved it.
Last night I installed compiz-config and tried to activate the desktop cube and made the mistake of clicking through the alert messages without properly reading them, and then all of a sudden my window boarders disappeared. So now I have no close, minimise or maximise buttons. no file, edit, view, etc options and I cant move any windows. I completey removed compiz and the window boarders came back, but then when I re-installed it and started it with "compiz --replace" the boarders disappear again (in a side issue, now when I log in I have to manually start compiz with "compiz --replace", if anyone could help me with making compiz start by default again that would be great).
I'm currently using Natty 64-bit and the problem only seems present on Ubuntu Classic, Unity and fail safe mode both seem fine.
I'm pretty sure the issue is in a setting stored somewhere in /home as I only did a clean install last week and have /home on a separate partition so re-installing Ubuntu seemed like a quick solution but even after that the problem is still there.
I have recently upgraded to 11.04 and everything works except for compiz and emerald, every time I enable compiz to be the window manager the borders either do not work or they do not appear. I switched the window manager to metacity and now the borders work but I can not get any effects at all. Also emerald never replaced the window borders either.
I created a 2nd login that I set up with Gnome instead of Unity. Unity has a few things that drive me nuts like no notification area among other things. I want to still be able to access Unity to try to get used to it, but will probably use gnome mainly.Anyway, I like using the compiz desktop cube effect (also something I could not do in Unity). When I activated it, all my title bars (the top bar in most all windows) vanished. I have seen this before, but the normal fixes aren't working.
This is one thing that still bugs me about Linux/Ubuntu. A couple clicks and you just hose your desktop/ computer. It is not that easy to screw up a windows machine. It isn't even as if I clicked on something wrong.Is there a something about 11.04 that causes a bigger problem with compiz?
Is there is a way in compiz to open all the minimized windows in the taskbar? Since I want to use the "scale" feature in compiz for all of the windows. As what you already know is that, the "scale" feature only works for the open windows not the minimized ones. So I want a way to open all the minimized windows with a shortcut(using compiz or any thing else) and then use the scale feature again.
I have an Intel setup with 64bit Ubuntu. I have an NVIDIA graphics card. When I used compiz, I found that my mouse would follow newly created windows. (e.g, I would bring up terminal and if I hit F1, the mouse would move to the upper right of the screen by itself. I have since turned off compiz which resolves the issue. where I can turn it off/on.
i have compiz-fusion install on my ubuntu and it has crashed. i was setting the transparency for the title bars of windows (trying to). suddenly compiz just crashed and now everything is transparent! i can only see docky and the menu bar on top. all windows and menus are 100% transparent. i am have a dual-boot with windows and am using it now. i also have ext2 reader installed, so i can access my files on ubuntu.
After having some problems with the latest Ubuntu release, I decided to give openSUSE another chance. This time I managed to get flawlessly working everything I needed, and I'm very satisfied with this distro so far.
That said, I encountered a weird glitch in Compiz, specifically with its 3D Windows plugin. It's not really a big deal, but it bugs me, so I might as well give it a shot and ask about it here. With the 3D Windows activated, this is what I get:
what causes this and how can I fix it? I'm using the latest NVIDIA propietary drivers. If you need me to post any additional info, I'll be happy to comply.
I'm using debian lenny, my video card is an ATI x1300 series, I've installed compiz from the debian's repositories. All works fine except the next: Sometimes the windows appears out of screen, but this happens with windows related to the getfile function -for example: attach a file to an email, change the directory to download a file, seek some playlist file in "atun", etc.; so these windows appears in the top border of the screen, I can only watch the buttons "cancel" and "ok". I don't want to change the resolution every time this happens, so my question is: what should I change/edit to prevent this happen?
There are these little white flickers between the border between the window bar (w/ the window buttons) and the application every time I move the window.
I've been looking for an option to turn off for this, but haven't found any, and Google hasn't been helpful.When I switch windows with alt-tab, or a window requests focus, compiz warps my mouse cursor to that window. How do I make it stop?
I use the Scale Windows (aka Window Picker) of Compiz. I'm not entirely happy about the behaviour and i'm not sure if / how i can customise it.
What i want is:that minimized windows also are represented among scaled / exposed windows for me to pick from. that my panel and dock are still clickable when all my windows are scaled / exposed.
Is there any way i can include / exclude these windows from that effect?
