I use a few different hard drives that I plug into one PC instead of partitioning, since it causes problems. I plugged in my Ubuntu 9.10 64 bit and it booted up in 1024x768 instead of 1280x1024 which is the default resolution for this monitor.Why would it change when it's been 1280 x 1024 everytime but this time? When I check the display settings it doesn't even have 1280x1024 anymore?
View 1 Replies
Suddenly Ubuntu goes into low-graphics mode the last couple of days I have had to reboot my Ubuntu-workstation when the screen suddenly goes black. After some seconds I get a pop-up with the message: Ubuntu is running in low-graphics mode. There is some buttons that tells me I can do different things but whatever I do I end up loosing all windows I worked in earlier. And having to reboot to get back full resolution [URL].
View 2 Replies View RelatedI'm using Nvidia's driver from their website and Kubuntu 8.04. I tried Debian 5.04 kde on the same computer and the resolution stays. Of course I prefer kubuntu. After shutdown the video resolution goes back to 1024x768 but I want 1280x800 instead. I have a Dell IN191ON lcd widescreen monitor and geforce fx 5200 video card. I'm using the latest video driver from Nvidia for this card version NVIDIA-Linux-x86-173.14.25-pkg1.run.
Here is my xorg.conf.
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder75) Wed Jan 27 03:03:53 PST 2010
Section "ServerLayout"
[Code]....
Every time Ubuntu (10.04) starts, it uses a screen resolution of 1024x768. I change this successfully through Preferences to 1280x1024, but it is never remembered at the next boot. How do I ensure that it is. (I've read that an etc/X11/xorg.conf file may be used for this, but I don't have one and am unsure what I need to put into one)
View 3 Replies View RelatedI currently have the proprietary drivers for nvidia installed for my gtx 460, nvidia drivers are ver 270.41.06. Ever since I reformatted my computer and got the new nvidia drivers, every time I reboot my resolution goes to something horrible(1024x76 on a monitor capable of 1920x1080. While I can simply change it every boot, it gets quite tedious so I have a script to run on boot:
Code:
xrandr -s 1920x1080
To set my monitor to its proper resolution, the issue is I still have to reset gnome panels etc every time after the resolution has changed the config.
My xorg.conf is as follows:
Code:# nvidia-settings: X configuration file generated by nvidia-settings
[Code]...
I have also tried changing the default resolution in the server settings manager and saving the xorg.conf file, but nothing seems to work. Is there any way to change this/has anybody else had the issue? I'm considering going back to an older version of the drivers if that would solve it,
I installed Nvidia 195 version from their site and installed as per their instruction. Now, on reboot the resolution gets "800*600" while it should be "1366*768". What should I do?
View 5 Replies View RelatedMy screen resolution keeps reverting back to the default resolution 800x600. I'm using ubuntu 10.04, but had the same problem on 9.10 on my Acer Revo r3600 ION. I am able to change the resolution to 1280x1024 but have to do it by the nVidia configuration tool. The tool then allows me to 'Save to X Configuration'which it appears to have done successfully.See the sections from my 'etcx11xorg.conf' file. This is the state of the file after a reboot by the way.how I can get my desired resolution to persist after I reboot?
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
This is a new 9.10 installation. Screen resolution by default is 800x600. I've installed the 1.85 nvidia driver, which correctly identifies my monitor as a Samsung 931b (or whatever). Nvidia's gui suggests a 1280x1024, which is just what I want. When I try to save the changes to xorg.conf, I get a variety of errors, including (but not limited to) "...error parsing xorg.conf..". I've chmod 'ed the X11 directory, and the xorg.conf* files in it to 777, I end up with 1280x1024 until a reboot, after which I get 800x600 again (arrgg!).
Judging from the number of people posting here and in other places, this is common. Seems there would be a solution that works. Any suggestions?
Here is the current content of my xorg.conf file:
ebaxter@ebaxter-desktop:/etc/X11$ cat xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Sun Feb 1 20:21:04 UTC 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
[Code]....
Every time I reboot, my screen resolution goes back to 800x600. Is there a way to permanently set it to what I want?
I'm running OpenSuSE 11.2 using KDE.
I am installing 11.2 on an older machine, Athlon 2800+, GeForce 6800, 1 GB RAM. Install goes fine until try to reboot to the OS and just get massive garbage on the screen. Can't see anything just lines crossing the screen, it seems almost like the resolution is way off but don't know how to change that since I can't see anything. I tried two different install disks to make sure not the problem and got the same thing with both. I tried installing both KDE and GNOME on separate occasions and still same problem. I have used the same install disk to put this on an even older machine and that went fine. I do have windows 7 installed on another partition. I'm fairly new to linux but I'm learning.
View 9 Replies View RelatedI just install a GT240 video card on my desktop. The monitor that I've been using is a 50PH9UK plasma TV. The TV is connected to the desktop through VGA output. It appears that Fedora sets the screen size at 1360x860 by default. However, I prefer to set the screen size at 1020x768. The problem is that everytime I reboot the desktop, Fedora automatically resizes the screen to the default resolution (1360x860). I tried to look for the xcon.fig file in /etc/X11/ but it's not there. It appears that the xcon.fig is missing. Do you know how I can correct the automatic screen reset issue? By the way, I'm using the Fedora 14 KDE version.
View 4 Replies View RelatedI have Ubuntu 10.04 32bit installed on my desktop. My video card is an nVidia 7800 GT. My Monitor is a Sceptre X24WG. I am able to use the NVIDIA X Server Settings utility to change my resolution to 1920x1080 as well as 1920x1200,and 3d opengl accelerated games work. When i reboot, the x server comes up with 1280x1024 as the resolution. I want it to remember the resolution i selected instead of defaulting to a different resolution.
I was running Kubuntu 8.10 previously and had some difficulty setting up the graphics initially, but i don't recall what steps i had taken to get it to work. When i recently reformatted to install Ubuntu 10.04, it wouldn't go directly to 10.04. The screen would go to a garbled display and would load the install window, so i installed 9.04 and then upgraded to 9.10 and then 10.04, without trouble.
I'm using the nVidia hardware driver version 195.36.15, which in the hardware drivers utility is listed as the current and recommended version. It originally wouldn't install until after i had rebooted into the 2.6.31-21 kernel. I have tried the option to save to x configuration file. When i save to x configuration file, the xorg.conf in /etc/X11/ looks like this:
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
# xorg.conf (X.Org X Window System server configuration file)
[Code]...
I've installed Fedora 12 KDE using VMWare, but I can't for the life of me get my display settings to stick. When I change the resolution, my display responds appropriately but upon logging out or rebooting, these settings are lost. Am I missing something completely obvious here?
View 14 Replies View RelatedI have tried the tips, and to the best of my ability understand the later posts from the sticky post "Graphics Resolution" however I seem to keep reverting back to the blank screen. I did this:
Quote: ATI TIPS: Note that some ATI cards need flgrlx and some do not... If not then this workaround sometimes works: (Found this in another thread / credit to Quote: Originally Posted by surgus View Post
Steps for ATI users:
1. When the boot hangs, press ctrl+alt+f1.
2. Login as user with root privileges.
3. Type "cd /usr/share/ati" and press enter.
4. Type "sudo sh ./fglrx-uninstall.sh" and press enter.
5. Type "sudo reboot".
The above only works for some but not all, depending on what card you have and whether it actually is supported by additional drivers (proprietary). All at the moment, mostl seem to need "nomodeset radeon mode=X", where x= 0 or 1... Some ATI cards are not working with the current natty kernel, but are working with the older 2.6.37 kernel or the proposed 2.6,38.9 kerne (please see post 2)l Sometimes (rarely) it'll work but more often it won't, and in the two times it's worked I haven't known how to get it to remember the setting permanently- keep in mind I have no idea what that last paragraph about x= 0 or 1 means.
I've read some people having the same problem, but I can't manage to fix it. I got a 1440x900 screen. Every time I reboot my system starts up with 1400x1050 , I have to go to System settings to fix it, options don't get saved as one would expect.
Well, I think my problem is cause of nvidia drivers, so I go to nvidia settings to get this fixed. But, these settings are all fine, it says 1440x900. When I try pressing Save to X (to make sure it gets saved), i get a failed to parse message (Failed to parse existing X config file '/etc/X11/xorg.conf'!). I've got driver version 256.53
Oh well, screw this, I'll do it manually, so I go to the xorg.conf file. But over here everything says 1440x900. How come my resolution keeps changing each time I reboot?
I'm using Redhat 5 with a video card nvdia fx 1500 and a zalman zm-m220 monitor
Has anyone configured a 3D monitor with redhat?
I'm trying to set the resolution to 1680x1020. I edit /etc/X11/xorg.conf and try to manually enter the resolution but after a reboot it goes back to the default.
which is the file i need to edit to manually enter the resolution.
Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies View RelatedI'm working with Linux 2.6.23 on an embedded device and am receiving the following error executing the reboot command.
View 2 Replies View RelatedI am using sda1 as /, which is a bootable drive. I do not know if my problem is that I did not create a /boot drive. After removing the iso dvd, I tried to reboot and I get this back: -bash: /sbin/reboot: input/output error Then it returns me to the terminal prompt.
View 6 Replies View RelatedI'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies View RelatedI searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies View RelatedWhen I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies View Relatedlast -a shows server rebooted, how to identify the source or cause of reboot? thx reboot system boot Wed Feb 16 08:52 (02:0 2.6.21.7-2.fc8xen
View 2 Replies View RelatedI was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
View 3 Replies View RelatedI've installed Ubuntu 9.10-karmic koala-and all runs good except screen resolution. I don't have any graphic card, and with windows I never had problems...but with linux max resolution is 800x600. what can I do to set a resolution of 1024x760 or similar ?
View 2 Replies View RelatedI have googled this and I refuse to believe the answer is "older video card" or "ubuntu". Does anyone know what boot parameters to use or how to get Fedora to start the install process in a resolution other than the "Optimum resolution"? resolution=640x40 vga=ask. These do not work. They set the debug display but when the graphical portion starts it defaults to the "optimum resolution" and the message displays "Cannot Display This Video Mode". As you consider the answer, think this is a new computer, blank hard disk, etc. I am installing Fedora 10. Tried 11 and Vista seems less buggy, prefer 10 or 9.
View 9 Replies View RelatedFurther to this LQ thread which Tinkster solved by suggesting the last command (thanks Tinkster) I have been exploring last -x reboot and have found that the reported duration is incorrect for the last reboot and shutdown when a old wtmp file is used. Not having a record for the following shutdown, last assumes that the system has been up until the current time and similarly for the shutdown.
The output comes in time order, latest first, each line showing the time of the reboot and the uptime from then to shutdown. Using last -x reboot shutdown to show the shutdown time, here's an illustration
Code:
shutdown system down 2.6.29.6-smp Sun Mar 7 15:35 - 03:02 (11:27)
reboot system boot 2.6.29.6-smp Sun Mar 7 09:35 (05:59)
09:35 until 15:35 is 05:59.
When the uptime exceeds 24 hours it is shown as (<days>+<hours:minutes) like this
Code:
shutdown system down 2.6.29.6-smp Sun Feb 21 12:39 - 13:20 (00:40)
reboot system boot 2.6.29.6-smp Sat Feb 20 09:39 (1+02:59)
09:39 until 12:39 the next day is 1 day 02:59.
The time in parentheses at the end of the shutdown lines is normally the time until the next shutdown.
So far so good. The incorrect output is for the last reboot and shutdown of an old wtmp file. Here's the output of last /var/log/wtmp -x reboot shutdown; last -f /var/log/wtmp.1 -x reboot shutdown
Code:
[snip]
reboot system boot 2.6.29.6-smp Fri Mar 12 07:42 (01:54)
shutdown system down 2.6.29.6-smp Fri Mar 12 01:31 - 09:37 (08:05)
wtmp begins Thu Mar 11 08:25:26 2010
[snip]
reboot system boot 2.6.29.6-smp Wed Mar 10 14:12 (15+01:42)
shutdown system down 2.6.29.6-smp Wed Mar 10 12:41 - 15:54 (15+03:13)
[snip]
The boot started at "Wed Mar 10 14:12" which had an actual uptime of 1 day 11:20 is reported as 15 days 03:13 which is the time from then until the last -f /var/log/wtmp.1 -x reboot shutdown command was issued. The time from shutdown to shutdown is similarly affected.
I tried using scalpel to recover some files that i had deleted. It went through the first pass but on the next pass there was an error message saying disk full The next time I tried to boot ubuntu I got a strange screen filled in a very large font and a message in the top corner: The configuration defaults for gnome power manager have not been installed correctlyI do not want to reinstall Karmic Koala as I may lose my email messages and other data.
View 5 Replies View RelatedI'm using 10.04. I had sound this morning, and after a reboot ... no sound. When I click on the speaker in the panel and choose "Sound Preferences..." and then choose "Hardware" it's blank. In the "output" tab all I have is "Dummy Output" (it's stereo at least). I don't remember updating Ubuntu since the morning, but I might have. If I type in "pulseaudio" into terminal I get this:
[Code]...
i have been encountered this issue since ubuntu hardy 8.04.3, and now after i clean installed to ubuntu lucid 10.04 with the latest update up to june 6, 2010, i still could not reboot via command line in a remote ssh.
View 2 Replies View Related
