Ubuntu :: Nvidia GTX 460 Drivers In 10.10 Not Working?
Jan 18, 2011
I just upgraded to 10.10 from 10.04. I used to have a manual install of the nvidia drivers configured (by downloading binary from Nvidia website) but right before I upgraded I used nvidia-uninstall to remove it. Upon rebooting into 10.10 I went to Additional drivers and activated nvidia-current. After I rebooted I still had no driver, so I looked in the Additional Drivers pane again. It says Nvidia-current is activated but not currently in use. Then I went to a terminal and typed:
sudo nvidia-xconfig. Thinking it would reconfigure X to work with my 460, however it instead said: command not found What's going on here?
View 3 Replies
ADVERTISEMENT
Dec 5, 2010
I just did what i did below reinstalled them and seems to be working again. I installed the drivers then updated my ubuntu install (fresh install) which i read in another thread that if something updates the kernel or whatever it seems to below out your nvidia install on 10.04 and 10.10 i think if i remember right.
Ok so i haven't been using ubuntu in a very long time. Seen 10.04 lts came out and decided to wander back (xp is just getting to old and seems to be getting more and more sluggish everytime i upgrade to newer and newer hardware lol think no one is really supporting it anymore or barely and i'm to dam cheap to buy 7 lol)
anyway so i downloaded the newest geforce drivers from nvidia.
I followed instructions i had seen on here can't find the thread now.
anyway I shut down nouveau or whatever its called.
Then i did a alt+ctrl+F1
cd Desktop
tried using sudo service gdm stop but it don't work so i did sudo /etc/init.d/gdm stop that worked but recommends the way that won't work above lol least for me.
Then i had the nvidia driver on my desktop so i did sudo sh N (then tab) enter. it started the driver up said it could not install the application or something i forget eh i'll find out but asked if i would like to continue. I said yes and installed the driver everything seems somewhat ok after that then i restart my machine and bam says i'm in low graphics mode now, and my x-server for nvidia don't have any options in it at all to modify anything....
I'm using NVIDIA-Linux-x86-260.19.21.run Nvidia driver i have should i try the older one? if i can find it 250 something i think it was?
Just curious if there is another method i can try to get a driver in. I don't like using old drivers i tend to like the hot new stuff either beta or latest solid release.
View 1 Replies
View Related
Feb 8, 2010
I just reformatted like 5times+ trying to fix this issue, happens with Lucid Alpha 2 & Karmic install. Once I install the driver my mouse stops working and same with my keyboard. As in the mouse laser just turns off and all lights on keyboard too, just kills them off.
View 5 Replies
View Related
Apr 28, 2011
Tonight I upgraded to 11.04. Once I had finished the upgrade, I restarted my computer as it told me too. When I got past the ubuntu 11.04 (purple background orange dots), it simply went to the terminal and asked me to log in. I tried to restart the X server with "sudo service gdm restart" but no display popped up. I happened to have a few NVIDIA drivers in my downloads file also so I gave these a try, but the "install script" failed.
After all this I booted Ubuntu in graphic failsafe mode. I then decided to see what would happen if I removed the proprietary driver. Upon doing this and rebooting my Ubuntu booted into graphical mode "yay!".So without the Nvidia drivers I can finally see something other than terminal, but, I need those NVIDIA drivers for my work. So what can I do? I have tried installing the new NVIDIA linux drivers from the NVIDIA website,and have tried Installing the recommended driver via "additional drivers", but both have resulted in my being stuck in terminal.
View 9 Replies
View Related
Mar 7, 2010
I have an Asus UL80vt laptop. This laptop has an integrated (Intel) as well as a discrete (Nvidia 210m) graphics card.
I want to use the nvidia proprietary drivers because from what I understand, it's the easiest way to set up dual monitors (I have an external monitor). I installed the latest nvidia driver: NVIDIA-Linux-x86-190.53. When I try to run the NVidia X Server Settings GUI, it tells me that "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. "
I checked out my xorg.conf and changed the device driver to 'nvidia' instead of 'nv'. Curiously, when I run nvidia-xconfig, it changes the intel device to 'nvidia' which is a problem. So i skipped running that and just stuck with my xorg.conf. When I run startx, I get a message saying "failed to initialize the NVIDIA graphics device PCI:1:0:0".
I've combed through multiple forums which state different kinds of solutions and I've tried different kernel options such as 'vmalloc=512m' or 'noapic' to no avail.
P.S. I've attached my xorg.conf file
View 4 Replies
View Related
Jun 4, 2010
I have a zotac IONITX motherboard with HDMI video. The video seems fine, but I haven't been able to get the sound working through the HDMI cable. Even the little speaker at the top is gone. It was working fine when I had speakers hooked to the motherboard. I have installed the latest 256 driver from nvidia. If I run 'aplay -l' I get this:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1 Subdevice #0: subdevice #0
lspci -v gives :
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) Subsystem: PC Partner Limited Device 437b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
I don't know if this is important, but I noticed that it says its running an intel driver for my nvidia sound. Could this be the problem and if so, How do I fix it? Also, if I click on system->preferences->sound it comes up with a dialog box that says that its waiting for the sound system to come up. Why I am not getting any HDMI sound or even the little speaker icon at the top?
View 9 Replies
View Related
Feb 17, 2011
I am unable to enable desktop effects on ubuntu 10.04 32bit desktop , after installing Nvidia developer drivers 260.19.26. The output is shown below:
1)nvcc -V
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2010 NVIDIA Corporation
[code]....
View 1 Replies
View Related
Aug 16, 2011
I I have been trying to get the Nvidia development drivers working for a good day or so.
I have the 280 drivers installed, but these don't allow CUDA development.
View 6 Replies
View Related
Nov 3, 2010
After upgrading from Fedora 13 to 14 via preupgrade (works well), the nvidia drivers for my "nVidia Corporation GT218 [NVS 3100M] (rev a2)" (it's a ThinkPad T410S) work - including 3D, but every thing paints slowly. The Desktop Effects work, but everything visual (menus painting, dragging windows, etc.) are all noticeably slow (and worked fine in F13).
Update - apparently this issue is related to the GTK theme in use. The default (Fedora, or Clearlooks, or a few others) results in this slow behaviour. Other themes, like Nodoka and a few others perform fine.
View 14 Replies
View Related
Apr 5, 2011
My GNOME system stopped using the proprietary NVIDIA drivers after the recent dist-upgrade to v6.0.1. It was working perferctly before that.
My inxi output:
inxi -F
System: Host thirra-ws1 Kernel 2.6.32-5-686 i686 (32 bit) Distro Debian GNU/Linux squeeze/sid
CPU: Dual core Intel Core2 Duo E7500 (SMP) cache 3072 KB flags (sse3 nx lm vmx) bmips 11703.9
[Code].....
When I tried to configure the screen resolution using NVIDIA X server settings, I was told to run 'nvidia-xconfig'. I ran it, restarted X but my resolution is still stuck at the maximum of 1024x768. I've tried running the above many times with the same results. I even tried aptitude reinstalling but still the same.
View 11 Replies
View Related
Sep 9, 2010
Is there any way I can get sound working on a MacBook Pro 6,1 in Lucid without breaking the Wifi or Nvidia drivers?
View 4 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Jul 13, 2010
I installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related
Mar 7, 2010
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
View 16 Replies
View Related
Dec 12, 2010
I have Ubuntu 10.10. I want to install the from the nvidia website. The propriatary drivers from Ubuntu aren't great. I have downloaded the file, but what do I do with it now? How can I get it installed?
View 5 Replies
View Related
Jun 9, 2010
opensuse 11.2 ,my monitor keeps going to sleep or somthing and this is a problem when im watching videos,ive set screens power setting but they dont seem to be whats doing it.im running a nvidia gtx260 and have installed nvidia drivers for series 6 and up.dont know if its the divers or somthing else.
View 9 Replies
View Related
Mar 12, 2010
I've tried to install nvidia drivers using this commands:
Quote:
yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig
After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.
My GPU is nvidia gtx 280:
Quote:
[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)
My kernel is:
2.6.32.9-70.fc12.i686
View 4 Replies
View Related
Jun 27, 2010
I've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies
View Related
Jul 28, 2009
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
View 5 Replies
View Related
Apr 9, 2010
When I had a wubi install(after I restarted, logged in, etc.) a little icon appeared in the top right-hand corner of the screen informing me of an nvidia driver update, which was required to run compiz desktop effects. Now I have ubuntu installed on an actual hard drive(wubi was deleted beforehand) and I get no such icon. So I'm wondering how to update my drivers. BTW I have a 9500GT
View 2 Replies
View Related
Apr 16, 2010
When i was on the live cd installing ubuntu it said i could install my driver but now that i am running off the hard drive it doesn't pick it up under "Hardware Drivers"
View 3 Replies
View Related
May 2, 2010
I'm running ubuntu 64x and I have just re-installed, here's my problem.
1. Installed nvidia drivers on other installation and it just brings me to a terminal that tells me to login and I manually need to start x from there
2. Yes, this happens with the current and older drivers provided by ubuntu via the restricted drivers application
3. I know I must not be the only one, as many people use nvidia cards..
View 9 Replies
View Related
May 31, 2010
I have a desktop installation of Ubuntu 8.10 which has somehow lost parts of it's nvidia drivers. Is there some way, short of reinstalling Ubuntu, that I can completely remove the dregs of my nvidia installation, and then re-install it all afresh ?
View 9 Replies
View Related
Sep 3, 2010
teh current version according to Hardware Drivers is 195.36.24 the current one on nvidia's site is 256.53 if there is a way to sue the package manager to get it that would be preferable I know how to install their run files they have
View 5 Replies
View Related
Oct 14, 2010
I have got to install nvidia 260.19.12 drivers in ubuntu 10.10 64 bit. I have got a GTX 460, so I think these are the right drivers [URl]..The question is: how do I download and install 260.19.12 drivers? I would need a step by step guide, because I'm not familiar at all with Ubuntu, so it can be difficult for me, even if I will try my best.
View 9 Replies
View Related
Oct 17, 2010
I need an answer asap,so, did nvidia-96 legacy drivers get fixed(won't make system stuck at splash)?
View 1 Replies
View Related
Jan 4, 2011
I've got Ubuntu 10.10 and a nVidia 8400GS but when I try to install the newest drivers I get the following error:
ERROR: You appear to be running an X server; please exit X before installing.
View 8 Replies
View Related
Apr 29, 2011
I did alot of reading on installing nVIDIA Drivers So far, I did it through the Package Manager. But I got the older 260.* drivers. I downloaded the main drivers from nVIDIA Page. Ran the RUN file. I'm running an Giada PC with ION 9400 IGP. What do you people recommend the best way to install? Custom build? Which I don't know how to. I tried to get vdapu installed as well. But I still get Undefined Rendering in Flash Player. And Boxee plays videos cropped on the left hand side. Right now I have 270.40.16 drivers installed.
View 8 Replies
View Related
Jun 15, 2011
Just installed Ubuntu 10.04 on my desktop, inserted a nVIDIA cd in order to install the nVIDIA control panel plus drivers, a CD icon appears on the screen but nothing happens, I have right-clicked the icon and selected open but it show me just a folder with 'bin', autorun.exe' etc. and the cd wont start. Same for other cds.
View 9 Replies
View Related
