I I have been trying to get the Nvidia development drivers working for a good day or so.
I have the 280 drivers installed, but these don't allow CUDA development.
I am unable to enable desktop effects on ubuntu 10.04 32bit desktop , after installing Nvidia developer drivers 260.19.26. The output is shown below:
1)nvcc -V
nvcc: NVIDIA (R) Cuda compiler driver
Copyright (c) 2005-2010 NVIDIA Corporation
[code]....
I'm tyring to compile the CUDA SDK examples on Fedora 11. Only a few of them compile. The rest fail with messages like:
[code]...
I've been trying to get the Nvidia drivers from the nvidia site installed by running-devdriver_4.0_linux_64_270.41.19.run
I have a GeForce 210 PCI Express DDR3 graphics card. I've recently screwed an old version of fedora trying to do this and ended wiping it and installing Fedora 15. I managed to get the standard setup working nice with dual screen support and Tux Kart working smoothly which has never happened before with ATI cards.
The reason i've tried to get an NVIDIA card working is so that i can try to do some development with CUDA. To do this i need to get the proprietary driver working. To get the install program working correctly i've edited the kernel options in grub.conf to stop nouveau driver which seemed to work. The next step i got onto was the need for the kernel source which i've installed. The program can't find this, even with a load of Symbolic links giving-
/usr/src/linux-2.6.40-4
/usr/src/linux
/usr/src/2.6.40-4.fc15.x86_64
/usr/src/linux-2.6.40-4.fc15.x86_64
/usr/src/linux-2.6.40-4
all pointing to-
/usr/src/Kernels/2.6.40-4.fc15.x86_64
After following the steps of dozens of guides, i now cannot run games that need 3d support and i'm no further in getting the proprietary drivers working. Coding in CUDA is a distant dream after weeks of faff in my spare time to go 2 steps back and one forward...
Does anybody know how to do all this? If anybody could help me i'd be very grateful. I've never had decent graphics support in linux. Everytime i've tried it's ended in a horrible mess!
I apologize if this is a duplicate post but I was unable to find anything that addressed my question. Currently I've installed the nvidia developer driver (beta) found here:[URL]..
After installing the driver everything works correctly. Rebooting the system results in a hang prior to starting X. Opening a new console and running start X provides me with the following error:
Code:
[ 103.884]
X.Org X Server 1.8.2
Release Date: 2010-07-01
[ 103.885] X Protocol Version 11, Revision 0
[ 103.885] Build Operating System: x86-10 2.6.32-44.el6.x86_64
[Code]..;.
At this point if I reinstall the driver and reissue startx, again the system starts up properly. Also I've noticed that after a reboot, my xorg.conf file is being overwrriten.
Does somebody know if the NVIDIA driver from NVIDIA repository supports Cuda?
View 2 Replies View RelatedAfter upgrading from Fedora 13 to 14 via preupgrade (works well), the nvidia drivers for my "nVidia Corporation GT218 [NVS 3100M] (rev a2)" (it's a ThinkPad T410S) work - including 3D, but every thing paints slowly. The Desktop Effects work, but everything visual (menus painting, dragging windows, etc.) are all noticeably slow (and worked fine in F13).
Update - apparently this issue is related to the GTK theme in use. The default (Fedora, or Clearlooks, or a few others) results in this slow behaviour. Other themes, like Nodoka and a few others perform fine.
In this link is explained why I cannot. [URL] ....
View 0 Replies View Related[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
I just did what i did below reinstalled them and seems to be working again. I installed the drivers then updated my ubuntu install (fresh install) which i read in another thread that if something updates the kernel or whatever it seems to below out your nvidia install on 10.04 and 10.10 i think if i remember right.
Ok so i haven't been using ubuntu in a very long time. Seen 10.04 lts came out and decided to wander back (xp is just getting to old and seems to be getting more and more sluggish everytime i upgrade to newer and newer hardware lol think no one is really supporting it anymore or barely and i'm to dam cheap to buy 7 lol)
anyway so i downloaded the newest geforce drivers from nvidia.
I followed instructions i had seen on here can't find the thread now.
anyway I shut down nouveau or whatever its called.
Then i did a alt+ctrl+F1
cd Desktop
tried using sudo service gdm stop but it don't work so i did sudo /etc/init.d/gdm stop that worked but recommends the way that won't work above lol least for me.
Then i had the nvidia driver on my desktop so i did sudo sh N (then tab) enter. it started the driver up said it could not install the application or something i forget eh i'll find out but asked if i would like to continue. I said yes and installed the driver everything seems somewhat ok after that then i restart my machine and bam says i'm in low graphics mode now, and my x-server for nvidia don't have any options in it at all to modify anything....
I'm using NVIDIA-Linux-x86-260.19.21.run Nvidia driver i have should i try the older one? if i can find it 250 something i think it was?
Just curious if there is another method i can try to get a driver in. I don't like using old drivers i tend to like the hot new stuff either beta or latest solid release.
I just upgraded to 10.10 from 10.04. I used to have a manual install of the nvidia drivers configured (by downloading binary from Nvidia website) but right before I upgraded I used nvidia-uninstall to remove it. Upon rebooting into 10.10 I went to Additional drivers and activated nvidia-current. After I rebooted I still had no driver, so I looked in the Additional Drivers pane again. It says Nvidia-current is activated but not currently in use. Then I went to a terminal and typed:
sudo nvidia-xconfig. Thinking it would reconfigure X to work with my 460, however it instead said: command not found What's going on here?
I've tried to install nvidia drivers using this commands:
Quote:
yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig
After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.
My GPU is nvidia gtx 280:
Quote:
[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)
My kernel is:
2.6.32.9-70.fc12.i686
I just reformatted like 5times+ trying to fix this issue, happens with Lucid Alpha 2 & Karmic install. Once I install the driver my mouse stops working and same with my keyboard. As in the mouse laser just turns off and all lights on keyboard too, just kills them off.
View 5 Replies View RelatedTonight I upgraded to 11.04. Once I had finished the upgrade, I restarted my computer as it told me too. When I got past the ubuntu 11.04 (purple background orange dots), it simply went to the terminal and asked me to log in. I tried to restart the X server with "sudo service gdm restart" but no display popped up. I happened to have a few NVIDIA drivers in my downloads file also so I gave these a try, but the "install script" failed.
After all this I booted Ubuntu in graphic failsafe mode. I then decided to see what would happen if I removed the proprietary driver. Upon doing this and rebooting my Ubuntu booted into graphical mode "yay!".So without the Nvidia drivers I can finally see something other than terminal, but, I need those NVIDIA drivers for my work. So what can I do? I have tried installing the new NVIDIA linux drivers from the NVIDIA website,and have tried Installing the recommended driver via "additional drivers", but both have resulted in my being stuck in terminal.
I have an Asus UL80vt laptop. This laptop has an integrated (Intel) as well as a discrete (Nvidia 210m) graphics card.
I want to use the nvidia proprietary drivers because from what I understand, it's the easiest way to set up dual monitors (I have an external monitor). I installed the latest nvidia driver: NVIDIA-Linux-x86-190.53. When I try to run the NVidia X Server Settings GUI, it tells me that "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server. "
I checked out my xorg.conf and changed the device driver to 'nvidia' instead of 'nv'. Curiously, when I run nvidia-xconfig, it changes the intel device to 'nvidia' which is a problem. So i skipped running that and just stuck with my xorg.conf. When I run startx, I get a message saying "failed to initialize the NVIDIA graphics device PCI:1:0:0".
I've combed through multiple forums which state different kinds of solutions and I've tried different kernel options such as 'vmalloc=512m' or 'noapic' to no avail.
P.S. I've attached my xorg.conf file
I have a zotac IONITX motherboard with HDMI video. The video seems fine, but I haven't been able to get the sound working through the HDMI cable. Even the little speaker at the top is gone. It was working fine when I had speakers hooked to the motherboard. I have installed the latest 256 driver from nvidia. If I run 'aplay -l' I get this:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1 Subdevice #0: subdevice #0
lspci -v gives :
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) Subsystem: PC Partner Limited Device 437b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
I don't know if this is important, but I noticed that it says its running an intel driver for my nvidia sound. Could this be the problem and if so, How do I fix it? Also, if I click on system->preferences->sound it comes up with a dialog box that says that its waiting for the sound system to come up. Why I am not getting any HDMI sound or even the little speaker icon at the top?
My GNOME system stopped using the proprietary NVIDIA drivers after the recent dist-upgrade to v6.0.1. It was working perferctly before that.
My inxi output:
inxi -F
System: Host thirra-ws1 Kernel 2.6.32-5-686 i686 (32 bit) Distro Debian GNU/Linux squeeze/sid
CPU: Dual core Intel Core2 Duo E7500 (SMP) cache 3072 KB flags (sse3 nx lm vmx) bmips 11703.9
[Code].....
When I tried to configure the screen resolution using NVIDIA X server settings, I was told to run 'nvidia-xconfig'. I ran it, restarted X but my resolution is still stuck at the maximum of 1024x768. I've tried running the above many times with the same results. I even tried aptitude reinstalling but still the same.
Is there any way I can get sound working on a MacBook Pro 6,1 in Lucid without breaking the Wifi or Nvidia drivers?
View 4 Replies View RelatedI have nividea 8400 gs geforce gpu. i need some help about my graphic driver. what driver i need for mu gpu in fedora. i did not find any drivers for fedora linux, all drivers is for windows platform.
View 1 Replies View Relatedwhen i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....
I have Fedora 15 on my 64 bits PC, and i install the nvidia propetary driver using the rpm fusion repository and the metapackage "kmod-nividia".
The installation works fine, but the drivers not, it seems like Nouveau run's better.
So... can i uninstall the nvidia drivers and fedora automatically use Nouveau??, or the system loose both drivers?
I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.
I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.
For a new project at work, I'm looking into building a processing farm of a few dozen Tesla 1U servers from Nvidia. This has lead us on to figure a way to let the developers run tests on their own workstations (with the appropriate gfx card).The cards we're looking at are Quadro FX 1800 or 3800's to provide quite a bit of poke.
Thing is, I'm having issues with running any Cuda code successfully on systems installed with the pre-built nvidia drivers from RPMFusion. I can only get code running if I download the nvidia or cuda drivers from nvidia and install by hand. Not something I'd like to be maintaining across all out developer workstations. Is anyone out there running Cuda on Fedora/RHEL5 platform? If so, are you using RPM nvidia drivers or building them by hand?
I seem to have an issue with my nvidia drivers again.I get them working, then the next lot of updates to fedora seems to revert any progress I've made.Currently I can't run any 3d accelerated applications, no wine, no games etc, I have followed the documentation, installed the driver, added the blackist to noveau into boot.conf, and restarted
Code:
[james@nevada ~]$ uname -r
2.6.31.12-174.2.3.fc12.x86_64
[code]...
I tried again (with easylife this time) and I got the same result - once the kmod was finished I just got a cursor - so two tries with two different methods, same result. So, is there a generic type driver that will at least take advantage of some of the features of my geforce 6800?
View 10 Replies View RelatedI am a real Linux noob lol XD. So sorry if this questions seems a bit easy for some. So here it goes: I want to install NVidia drivers for my laptop and need a compiler to actually install them. I do not have any installed and would like to know how to install gcc, as in the error when i run NVidia driver it says that I need it.
View 9 Replies View RelatedI've been scouring google, using all forms of guides to try and get these damn nvidida drivers installed so I can move my resolution from 800x600 to 1280x1024 (I have a small monitor) I'm running a NVidia GeForce 260 GTX. I've executed yum update I've run rpm - [URL] and everything installed. I've edited grub.conf to disable the default drivers.
[Code]....
I'm new to linux and am trying to install Nvidia drivers on my system. The install says to :-
1. install Binutils (which i've managed to do)
2.stop the X service from running (here I'm having problems)
I've tried "X -terminate" but I just get an error message. point to how I can terminate the service.
I updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.
I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies View Related