I'm currently running Ubuntu Netbook Remix on my HP Mini 110-3000 and I get no speaker output but the sound works when I plug my headphones in. I downloaded Alsamixer and played with the setting but nothing helped so now I turn to you guys.
View 9 RepliesI have bought a laptop 2 months ago with pre installed windows7 and installed Ubuntu 10.04 64bit but still didnt get sound from the speakers. With headphones everything is OK . I have unmuted everything and searched forums but nothing so far. In windows I get speaker sound so it is not hardware problem. In alsamixer it appears I have 2 soundcards, one HDA -intel (chip Realtek ALC272) and a second one HDA nvidia ( a virtual one propably from my nvidia VGA ) that lacks controls . With lspci -v , it appears both use the same driver :Kernel driver in use: HDA IKernel modules: snd-hda-intel . Tried to disable the first one from bios but it didnt help I also tried sound adjustment in preferences -> sound and gnome-alsamixer, nothing From gnome alsamixer, when I mute speakers, the headphones also get mute so may be the system doesnt recognize speakers and headphones separately ? May be it has to do with config files but my linux knowledge is low
View 9 Replies View RelatedI have bought a laptop 2 months ago with pre installed windows7 and installed Ubuntu 10.04 64bit but still didnt get sound from the speakers. With headphones everything is OK . I have unmuted everything and searched forums but nothing so far. In windows I get speaker sound so it is not hardware problem. In alsamixer it appears I have 2 soundcards, one HDA -intel (chip Realtek ALC272) and a second one HDA nvidia ( a virtual one propably from my nvidia VGA ) that lacks controls . With lspci -v , it appears both use the same driver :Kernel driver in use: HDA IKernel modules: snd-hda-intel . Tried to disable the first one from bios but it didnt help I also tried sound adjustment in preferences -> sound and gnome-alsamixer, nothing.From gnome alsamixer, when I mute speakers, the headphones also get mute so may be the system doesnt recognize speakers and headphones separately? May be it has to do with config files but my linux knowledge is low.
View 3 Replies View RelatedI don't get any sound from my left speaker. With my headphones plugged in though I get sound in both speakers. I've upgraded my Kernel to .36. I'm using Ubuntu 10.10. I'm on an MSI A7200 which is a great laptop but apparently a very rare one. There's like no info on it at all on the internet.
View 3 Replies View RelatedI have installed Linux Mint 7 and Windows XP on my laptop Sony Vaio VGN-CR260A. In Windows my external speakers, built-in speakers and headphones all work well. how to connect external speakers to work in Linux Mint. But the laptop's built-in speakers and my headphones don't work in Linux.
View 2 Replies View RelatedWhenever i plug headphones into my computer, it won't turn the speakers off. I'm running Debian lenny with alsa
(from lspci)00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
I'm just installed 10.04 on a new Gateway DX4300. The integrated sound card is a Realtek AC1200. Sound works great, however, I'd like the rear input to mute when I plugin my headphones in the front input. Where can I configure this? Here's some basic information:
[Code]...
Yesterday I installed openSUSE 11.3 on a desktop PC and I noticed that the PC's speaker it's not functioning but if I plug the headphones I can hear the sound system working.
View 8 Replies View RelatedI'm still on UBUNTUO 9.04 atm - I'm getting myself a Logitech USB headset. I plugged it in, and immediately I see this in dmesg
[ 7015.732141] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.3/input/input11[ 7015.732234] generic-usb 0003:046D:0A0B.0006: input,hidraw3: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1a.1-2/input3 [ 7280.088017] usb 1-3: reset high speed USB device using ehci_hcd and address 3
Which is fantastic. Tested this on all kind of audio and I can hear them fine. So headset is working wonders. Except, everytime I want to switch the output from between the speaker and the headset, I have to go System > Preference > Sound > output tab > click on the switch. Which is fine, but the switching procedure via GUI is very arduous. Is there a way to to do this via the command line, if so I can bind it to a hotkey and therefore with one hotkey I will be able to switch between headset vs my speaker?
I have Ubuntu 10.10 installed in a notebook. Everything goes gone but the sound output, I can only hear the built in speakers, and I didn't find the headset output controls. I know there's no more mechanical switch as in the past, I mean, when you plug the headset it's is detected by the OS and the sound should come from that output, instead of the speakers, but that's not my case.
View 3 Replies View RelatedSound comes out of my laptop speakers, but only when hardware is selected as "Analog Stereo". "Digital Stereo" does not function at all. I don't think this is a priority though.
More importantly, my headphones do not have sound unless it is only partway plugged into the headphone jack. However, this does not help as sound is still coming out of my speakers. The instant I plug it all the way in, the sound disappears from both speakers and headphones. I have not tested this with multiple headphones (no access), but these ones work just fine in Windows 7 plugged in all the way.
I have tried an amazing number of things back in '09 when I was running 9.10, but gave up as no one could provide the answer. The threads that are related are:
[URL] (Don't worry about read-only file stuff, that is all resolved) [URL]
I am now on a FRESH install of 10.04 Lucid Lynx, so any changes I made in attempt to fix it is gone.
Looking into alsamixer, I found that there is a headphones column, but no bar. It just says it's on. So headphones don't seem to have their own level of volume that's set too low.
Here are some outputs: lcat /proc/asound/card0/codec#* | grep Codec:
Code:
Codec: Realtek ALC663
Codec: Nvidia MCP78 HDMI
aplay -l:
[Code].....
Just switched my laptop from that other operating system to openSUSE11.2. Everything works great except for one odd little bug. Both my speakers and headphones have output, are affected by the volume control and it even detects when I plug in headphones and stops output to the speakers. However the moment I adjust the volume, output to my headphones stops, and my speakers start.
Following is my multimedia information: [URL]
~> rpm -qa '*alsa*'
alsa-plugins-pulse-32bit-1.0.21-3.3.x86_64
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-plugins-32bit-1.0.21-3.3.x86_64
alsa-1.0.21-3.2.x86_64
alsa-plugins-1.0.21-3.3.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-oss-1.0.17-25.2.x86_64
alsa-oss-32bit-1.0.17-25.2.x86_64 .....
I want to make the audio available only on my headset and to turn the laptop speakers off. In windows, when i plug in the headphones, the speakers automatically turn off and audio is output only on the heads but that's not the case with slackware. I was looking in alsamixer and the audio and video configuration, but no success.
View 11 Replies View RelatedI currently have my desktop setup with two displays, one of them being my living room tv that I run Boxee on. My problem is that all the audio runs through the same speakers preventing me from listening to music or gaming at the same time as when Boxee is in use.
I would like to know if it's possible to split the audio so that an application of my choosing only outputs sound through my headphones. I was thinking it would be possible with some of the controls in pulse, but if it is I cannot figure it out.
I just installed 10.10 and I'm having an issue where sound outputs from the headphones and my speakers simultaneously, and the volume control controls both outputs rather than one of them individually.This has been asked about before at this thread, but none of the solutions I've tried from there have worked. I tried installing linuxant, but it just killed my sound altogether despite uninstalling it afterward. I tried updating the Linux audio modules as per this page but to no avail.I'm running Ubuntu 10.10 (64-bit) on my own custom built desktop, which for what it's worth, contains this motherboard.
View 8 Replies View RelatedAfter a lot of messing around and research, I figured out how to actually get my bluetooth headphones to connect and stay connected. Although once I shut them off, remove the device and re-add it using Blueman.
Right now, `pavucontrol` shows "Headphones (unplugged)" and there is no sound coming out of the speakers. But there is no sound coming out of the headphones either. They are set to the fallback. I've opened `alsamixer` and made sure everything was turned up. Still, no sound.
Since `bt-audio` isn't on Jessie, I don't know what I should do. It seems like this may be the missing step but I am unsure.
Ever since I installed Debian, when I plug in the headphones the sound goes out through both the headphones and the speakers (they aren't blocked). I don't mind it that much, but could it be potentially damaging to my sound hardware?
View 3 Replies View RelatedI want to create a small simple application that will let me change the Output of the Sounds option to go from speakers to my headphones. I can do this easily enough through System --> Preferences --> Sound, but I'd like to create a GUI front end for me to do this. This is more as a learning exercise than anything else.What is the best language for me to build the windows to do this? Also, how do I find the commands to let me toggle the sound settings? Where are they documented? I'm using Ubuntu 10.04.
View 2 Replies View RelatedI have installed Fedora 13 on my laptop, but there is something wrong with the sound。It just comes from both the computer and the headphone. I have installed alsa, you can see as follows:
[PDS@localhost ~]$ rpm -qa | grep alsa
alsa-lib-1.0.23-1.fc13.i686
alsa-driver-1.0.23-84.fc13.i686
alsa-firmware-1.0.23-1.fc13.noarch
report-config-localsave-0.10-5.fc13.i686
alsa-kmdl-2.6.34.7-56.fc13-1.0.23-84.fc13.i686
alsa-plugins-pulseaudio-1.0.22-1.fc13.i686
alsa-tools-firmware-1.0.23-1.fc13.i686
alsa-driver-devel-1.0.23-84.fc13.i686
alsa-lib-devel-1.0.23-1.fc13.i686
report-plugin-localsave-0.10-5.fc13.i686
alsa-utils-1.0.23-3.fc13.i686
Here are the screenshot of the sound preferences.
I has just got Asus N53JN, i have tried to installed both Ubuntu 10.04 and 10.10 but the speaker not work.lspci | grep Audio00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 1: Intel [HDA Intel], device 0: ALC259 Analog [ALC259 Analog]
[code]....
originally my sounds worked completely, but now I only have sound out of the headphone jack. I used all the OEM software originally, but ended up following this step-by-step guide to run all pulse audio. After installing that I noticed that the sound keys on my laptop still showed that they changed the volume, but didn't have any effect in PulseAudio Volume Control... fixed that by changing the keyboard layout. While that bugged me the sound still came out of my speakers and headphone jack, but just recently the speakers randomly stopped working. Has anyone else experienced this?Computer:Lenovo 3000 N100 0768-4JUWindows 7, and Ubuntu 9.04*Edit- I tried to make it in one post, but it would not allow me yet saying I tried to post a link.
View 5 Replies View Relatedi use opensuse 11.2 with kde 4.3 i have
snd-ens1371 loaded
i clicked on the alsa mixer i click on ac97 2ch-4ch copy but that don't work, i don't have sound with my 4 speaker
My server is headless, so I'd like to make it beep when it finishes booting. Some posts in the forum seem to indicate this is the default setting, but my box has no sound when login prompt appears. The speaker does work since it beeps once at the start of the booting process (probably BIOS' doing). "lsmod | grep pcspkr" shows "pcspkr 7105 0", lspci shows nothing related to speaker.
Also I'd like to know how I can test the speaker from command line (remote ssh terminal), will echo -e "007" work?
I am having trouble getting my internal speaker to work on openSuSE 11.2. These are the symptoms and my experiences to date. When I boot my machine the internal speaker emits a beep. On my other machines, I get a similar sound when I press Escape in vi (in command mode). It is this beep from the internal speaker that I am having trouble with. Looking around on the web I see that it is reported that the module snd-hda-intel can interfere with the internal speaker. When I unload this module using rmmod, I do get the beep from the internal speaker. When I reload it, the beep does not sound. Some of the reports seem to attribute the problem to a configuration option for the sound module called "digital beep" that needs to be enabled.
Using "make -C O=`pwd` cloneconfig" on my kernel sources, I see that the option CONFIG_SND_HDA_INPUT_BEEP is set to y. Also affected are things like printf ( "a" ) and sending Control-G to "cat" or "cat > /dev/console". what do I need to do get the internal speaker to sound while at the same time retaining the full capabilities of the sound system?
Sound in Ubuntu 10 will only play from the speakers on the laptop, not out of the headphones plugged in through the headphone jack.
View 9 Replies View RelatedI've had this problem since I clean-installed Ubuntu on this computer and have lived with it, but I was really hoping that upgrading (clean install) to 10.10 would fix it. my headphones don't work.When I plug headphones into the computer, the sound still comes out of the main speakers,and this is with all of the headphone jacks on my computer. the headphones work in all of my jacks when I am in windows. I can't figure it out.
View 9 Replies View RelatedI have got a Creative X-fi gamer card. I have Creative 4.1 speakers. One of the front speaker doesn't work and I use one front and two rear and of course one subwoofer.
In Gnome, it works after I do few commands and all is well. But, in any other desktop environment only the front one speaker works and the rear two don't. Neither in KDE nor in XFCE or LXDE.
I am tearing my hairs on this. And it is indeed the same with other distributions.
Is it because now it has become actually 3.1 and channelling is not happening. But in Gnome they work.
I'm running slack64 13.1, I don't have KDE installed or any of the KDE libraries (so answers concerning KMix aren't going to help), I'm using xfce4 as the desktop environment. Anyway I just bought a new 4.1 surround sound speaker system from Amadeus and wanted to give it a shot. Obviously my first instinct was to plug them in and give it a whack... much to no one's surprise this didn't work. So I googled my ass off, and it seems for every person that has had a surround sound system, there's a different solution for them. I tried a couple tutorials to end at the same disappointing conclusion: the front two speakers and the subwoofer work. So here's the current situation:
The front two speakers are plugged into the speaker-out port (the green one) and the rear-two speakers are plugged into the line-out port (the light blue one). Since the subwoofer works I'm going to assume it uses the the same line that the front two speakers do. I've turned all the lines all the way up in alsamixer, and made sure it's playing on 4 channel. I reran alsaconf just to make sure and it configured snd-intel8x0 for me with no complaints. I also added a .asoundrc file that looks like this:
[Code]...
Then I ran "speaker-test -c 4 -D surround41 -t wav". Again only the front two speakers play any sound. I'm kinda new to configuring sound, as I've never before had a problem.
Well I installed 10.04 and it seems to have been a success with one exception.My USB Logitac headphones don't work properly.There is sound that is so faint it is incomprehensible.They worked fine on 9.10.
View 2 Replies View RelatedI am using Ubuntu 9.10. My sound works fine unless I have headphones plugged in. I've tried 2 sets of headphones, and it doesn't work with either set, so it's not the headphones. The volume is not muted (it's at 100%) for the headphones either in alsamixer. How can I diagnose and fix this?
lspci -v
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: Gateway 2000 Device 0562
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f3010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
[Code]...