Hardware :: 4.1 Surround Sound Speaker System Didn't Work
Jan 13, 2011
I'm running slack64 13.1, I don't have KDE installed or any of the KDE libraries (so answers concerning KMix aren't going to help), I'm using xfce4 as the desktop environment. Anyway I just bought a new 4.1 surround sound speaker system from Amadeus and wanted to give it a shot. Obviously my first instinct was to plug them in and give it a whack... much to no one's surprise this didn't work. So I googled my ass off, and it seems for every person that has had a surround sound system, there's a different solution for them. I tried a couple tutorials to end at the same disappointing conclusion: the front two speakers and the subwoofer work. So here's the current situation:
The front two speakers are plugged into the speaker-out port (the green one) and the rear-two speakers are plugged into the line-out port (the light blue one). Since the subwoofer works I'm going to assume it uses the the same line that the front two speakers do. I've turned all the lines all the way up in alsamixer, and made sure it's playing on 4 channel. I reran alsaconf just to make sure and it configured snd-intel8x0 for me with no complaints. I also added a .asoundrc file that looks like this:
[Code]...
Then I ran "speaker-test -c 4 -D surround41 -t wav". Again only the front two speakers play any sound. I'm kinda new to configuring sound, as I've never before had a problem.
I have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
Recently I have started using my netbook (Acer Aspire one D250) alot more due to travelling and I noticed that the mic didn't work. Headed to the Ubuntu forums and saw a thread about installing ALSA. So I did and now I have no sound. From what I can tell ubuntu is no longer picking up my sound devices but I'm sure. Hence why I am here. I need to get my sound working again (obviously) and then in turn get my mic working for mumble and other VOIP programs.
I have bought a laptop 2 months ago with pre installed windows7 and installed Ubuntu 10.04 64bit but still didnt get sound from the speakers. With headphones everything is OK . I have unmuted everything and searched forums but nothing so far. In windows I get speaker sound so it is not hardware problem. In alsamixer it appears I have 2 soundcards, one HDA -intel (chip Realtek ALC272) and a second one HDA nvidia ( a virtual one propably from my nvidia VGA ) that lacks controls . With lspci -v , it appears both use the same driver :Kernel driver in use: HDA IKernel modules: snd-hda-intel . Tried to disable the first one from bios but it didnt help I also tried sound adjustment in preferences -> sound and gnome-alsamixer, nothing.From gnome alsamixer, when I mute speakers, the headphones also get mute so may be the system doesnt recognize speakers and headphones separately? May be it has to do with config files but my linux knowledge is low.
I have bought a laptop 2 months ago with pre installed windows7 and installed Ubuntu 10.04 64bit but still didnt get sound from the speakers. With headphones everything is OK . I have unmuted everything and searched forums but nothing so far. In windows I get speaker sound so it is not hardware problem. In alsamixer it appears I have 2 soundcards, one HDA -intel (chip Realtek ALC272) and a second one HDA nvidia ( a virtual one propably from my nvidia VGA ) that lacks controls . With lspci -v , it appears both use the same driver :Kernel driver in use: HDA IKernel modules: snd-hda-intel . Tried to disable the first one from bios but it didnt help I also tried sound adjustment in preferences -> sound and gnome-alsamixer, nothing From gnome alsamixer, when I mute speakers, the headphones also get mute so may be the system doesnt recognize speakers and headphones separately ? May be it has to do with config files but my linux knowledge is low
originally my sounds worked completely, but now I only have sound out of the headphone jack. I used all the OEM software originally, but ended up following this step-by-step guide to run all pulse audio. After installing that I noticed that the sound keys on my laptop still showed that they changed the volume, but didn't have any effect in PulseAudio Volume Control... fixed that by changing the keyboard layout. While that bugged me the sound still came out of my speakers and headphone jack, but just recently the speakers randomly stopped working. Has anyone else experienced this?Computer:Lenovo 3000 N100 0768-4JUWindows 7, and Ubuntu 9.04*Edit- I tried to make it in one post, but it would not allow me yet saying I tried to post a link.
I don't get any sound from my left speaker. With my headphones plugged in though I get sound in both speakers. I've upgraded my Kernel to .36. I'm using Ubuntu 10.10. I'm on an MSI A7200 which is a great laptop but apparently a very rare one. There's like no info on it at all on the internet.
i have MB:Gigabyte 770t USB and Cpu Phenom II x2 555 BE My sound card didnt work and i have no sound at alll. only hardware that reconized as sound output in my sound setting is 5700 series HDMI which blong to my VGA.
I just installed 10.10) i had speaker audio on my laptop but the front jacks for head phones didn't work. After fidiling with some config files, i forget which config thing it is in but there was numerous mentions about where you had to put "options I am already added to the audio group for my computer and running vlc as root does not work (vlc-wrapper) regular won't run as root, i tried that because i have fixed other hardware problems by running programs as root. The laptop is a HP Pavillion dv5-1000 and has a regular sound card and a hdmi port (the sound is configured to play out of the non hdmi one)
I use FC9. Yesterday after system update I turned of the computer, but today when it booted the wireless didn't work, ndiswrapper device wlan0:1 does not seem to be present, delaying initialization.I have removed and again installed the wireless driver and looks like it is ok,
[root@localhost utils]# ./ndiswrapper -r bcmwl6 [root@localhost utils]# ./ndiswrapper -i /fatfs/Archiv/Softwere/Drivers/Dr_software/bcmwl6.inf installing bcmwl6 ... [root@localhost utils]# after ndiwwrapper -m it gives warning( or error )[root@localhost utils]# ./ndiswrapper -m module configuration already contains alias directive [Code]....
I have on-board sound on a EVGA nForce 750i FTW edition motherboard, not sure if you need the board type, but I'm not getting any sound out of my headset which is a Razer Barracuda 5.1 surround sound. link me to a very basic tutorial video/text document for Ubuntu Linux.
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
I recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
I have a 4.1 surround setup that the computer sees a 4 channel setup (stuff going to subwoofer is split out in hardware so all the computer sees is the front and rear l/r channels).
All well and good, but phonon isn't giving me an option to set my output to 4 channels, only stereo (which means my rear speakers are useless) or 5.1 (which makes me fear losing channels if I play anything with actual surround sound).
Alsa says I'm using a HDA ATI SB audio card with realtek ALC662 rev 1. chip, I've set the default channels to 6 for 5.1 in /etc/pulse/daemon.conf but got only stereo.
I would assume I have to do something with the channel map, but I don't know where to begin. I can say it is not a hardware issue as it works fine in windows 7 where my mic in is my sub-woofer/center out and my line in is my line in is my rear speaker out. I tried going into sound preferences to see if I could get it to use line in and mic in as sub-woof out and rear out , but there was no such option. All I was allowed was analog duplex 1 output / 1 input.
I've got an old Philips 5.1 surround sound system and I'm just wondering how to set it up.Everything's hooked up properly (I think) but it's journeyed to no avail. I'm actually wondering if it's possible. I haven't got a surround sound card. I simply have a twin audio RCA to stereo cable plugged into the sound card.I've set the hardware in sound preferences to Analog 5.1 Surround. Here's the contents of my /pulse/daemon.config
Code:
# This file is part of PulseAudio. # # PulseAudio is free software; you can redistribute it and/or modify
I cant get sarround on pulseaudio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) I have 5.1 speaker, sound is only from front, front left && front right and from subwofer its no sound from rear left and right.
Only my 'front' sound output is working. No 'rear', 'side', or 'center'. And alsamixer only shows 'Master' 'PCM' & 'Capture' It's the onboard sound on a Asus M4A89TD PRO USB3 motherboard.
Here is my alsa-base.conf; # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2
I'm trying to get 5.1 surround sound working on my Dell Inspiron 1525 laptop running Fedora 13 (64 bit), but there is no option for it under "Sound Preferences - Hardware - Profile". There is an option for "Analog Surround 4.0 Output", which does as it says and uses four of the speakers (front and rear left and right) correctly (and the subwoofer as well I think, though not sure if this is done correctly).Running "aplay -L" gives the following:
Quote: default Default frontARD=Intel,DEV=0 HDA Intel, STAC92xx Analog Front speakers surround40ARD=Intel,DEV=0
[Code]...
it looks like it should be possible to set 5.1 surround sound (i.e. I don't think it's a driver issue).Though running "speaker-test -c 6" doesn't quite work as it should - it outputs via the subwoofer on "Center" and doesn't produce any sound on "LFE". But to start with at least - is there a way of manually forcing "Analog Surround 5.1 Output" to be a choice under "Sound Preferences"?
When I decode an audio clip which contain 5.1 streams (the encoding doesn't matter - or does it?) I cannot find an option which allows redirection of the lower frequencies (from front, back and center channels) to the sub woofer (LFE channel). I understand that this perfectly normal and this is how 5.1 supposed to work. My problem is that my speakers are not full range, so they cannot reproduce the bass in the streams. What I want to know is if there is a way to do something like this: [URL]
Which is described as: Bass redir - Bass redirection. Route basses from all channels to subwoofer. Works only if it is subwoofer at output speakers. Highly recommended for systems with separate subwoofer. Basses are routed before mixing so basses are shown at LFE input level (although 'real' LFE may be absent).
I'm aware of the enable-lfe-remixing = yes option. It works fine for stereo, but not for 5.1
I use ubuntu 9.10 and my pulseaudio version is 0.9.19. The player I use most is SMPlayer (version 0.6.8 (SVN r3213)) and AC3-liba52 for AC3 decoding. My system is up to date.
Currently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
I've been trying to get my surround sound(5.1) to work for the past couple of of days, followed a number of guides, but nothing seems to get it working at all. I'm connecting the speakers using 3 analogue audio cables, I have tested and they work fine under Windows. When I go into the Sound options in Ubuntu I don't see a 5.1 profile listed under the Hardware tab, only stereo(and that works fine).
The sound controller is a Realtek ALC892 built-in to my mobo(Gigabyte P55A-UD3).
Here is some info I've seen requested in other threads, I'm running 10.10 RC, but I can assure you it doesn't work under earlier versions.
Code: Linux Yurippe 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux Code: **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
I just got a 5.1 Surround sound system and set it up. I found that it was only working as stereo, though (That is, only the two frontal speakers were producing any sound). I made sure everything was not muted in alsamixer and checked that the hardware was set to 5.1 in the Sound Preferences Hardware tab.
I'm using Ubuntu 10.10 64bit and my sound card is an onboard Intel DG41TY, Realtek ALC888VC codec.
I recently purchased a Creative Fatal1ty headset with a USB connection, and was wondering if it's possible to use its 5.1 surround sound capabilities under Ubuntu.
I have a Acer Aspire Revo R3600 running Ubuntu 10.10. Its a clean install, all I have done is update the NVidia drivers and ASLA. The PC connects to my AV Receiver via HDMI and I have stereo sound but no surround sound. If I go to System > Preferences > Sound and look under the hardware tab I only have "Internal Audio Digital Stereo (HDMI) Output" and no mention of surround sound or 5.1 etc. I assume this is part of the problem.
Here is the update to the old thread that somehow disappeared "HOWTO: A52 Encoded 5.1 Surround Sound Awesomeness with PulseAudio and ALSA on Hardy" thread (archived here). See also this bug report.There are two steps here: add the a52 plugin, and tell pulseaudio to use it.
Step 1: Go to a terminal and do the following:
Code: sudo bash echo "pcm.a52 {[code]....
Pulse should come back on its own unless you disabled autospawn.Now pulse should be aware of your digital surround output. Go to System -> Preferences -> Sound. Click on the "Hardware" tab and change the profile to one of the 'Digital Surround 5.1' profiles. Play some sound (I like to test with www.pandora.com) and enjoy!If it doesn't show up, it probably means that alsa didn't create it correctly. To test if alsa sees the a52 device, type:
Code: aplay -D a52:0
If it errors out (audio open error: No such file or directory) then that means it did not like your asound.conf settings. You might learn something by looking at the output of 'sudo alsa reload' or just 'aplay'.[code].....
