I just installed Ubuntu 10.04. (Long Term Support version) and after installing, everything works fine, except for the sound. I don't hear any sound when I boot it up, when things are alerting me, or when i try to play any music, or video. I'm really at a loss for how to fix this, but I would love to get this fix by tonight.
View 7 Repliestrying to get everything set up in Debian lenny on my new Toshiba staellite L500. I have successfully installed the wireless drivers and graphics card and have them both up and running. But I'm having trouble with the sound card. Specifically, it appears to be installed but I cant get any sound or any devices related to sound (speakers, volume control, alsamixer) to work at all.
this is my kernel:
uname -r
2.6.26-2-686
and this is the result of lspci:
00:00.0 Host bridge: Intel Corporation Device 0044 (rev 02)
00:01.0 PCI bridge: Intel Corporation Device 0045 (rev 02)
00:16.0 Communication controller: Intel Corporation Ibex Peak HECI Controller (rev 06)
[code]...
I just installed Ubuntu 10.10 on my computer. Everything is working great, except for the fact that there is no sound. My speakers are plugged in and everything, so I'm guessing it's a problem with drivers, but I don't know much about dealing with drivers.
View 2 Replies View Relatedi have been looking and trying different things for about 2 days now and i cant get anything to work.
here is what i have
Dell studio xps 435mt but i am only running 32 bit ubuntu right now
tina@tina-desktop:~$ sudo cat /proc/asound/card0/codec#* | grep Codec
Codec: ATI R6xx HDMI
tina@tina-desktop:~$ sudo lshw -class sound
*-multimedia
description: Audio device
product: HD48x0 audio
vendor: ATI Technologies Inc
[Code].....
I just installed Ubuntu 10.10 and I've no sound. I tried few method like reinstall alsa but nothing works? My PC is old and my audio card is Realtek's AC'97.
View 1 Replies View RelatedA friend installed Xubuntu just yesterday. I am a user of this system for about 17 hours. He forgot to install the sound card, so I have 0 sound. Looking at the device manager, it appears my sound is: HDA VIA VT82xx. Please tell me how to get my sound card to work. I've got an old computer; previously I was using Windows 2000.
View 4 Replies View RelatedI installed it yesterday and was disappointed that no sound played
View 3 Replies View RelatedI have a realtek ac97 sound card and when i installed ubuntu no sound so how do i make the sound card work
View 1 Replies View RelatedRecently installed Kubuntu karmic koala (9.10) and I have no sound other then the startup sound.
[Specs]
O/S: Kubuntu 9.10 Karmic Koala
Mobo: Asus M3A78-EM
I just installed Lucid X64 on my PhenomX4 machine and I can't get my 5.1 speakers working. Only works in stereo.
Sound Preferences have only stereo options, how can I get surround 5.1? If it helps, I have Realtek for sound.
trying to get kismet to play sounds
-how do i find out what the sound application is used to play sound files?
-how do i find out what sound player is installed?
-sound application use to play the sound files.
....right its installed on my pc but im also goin to install kismet(ubuntu9.10) on my laptop. will it be the same?
I've just installed fedora 15 to try out Gnome 3and came to know the sound is not working . I've tried changing the setting from "Sound Setting" but didn't work. lsmod gave this
[vinodh@Joshua ~]$ lsmod |grep snd
snd_hda_codec_hdmi 20390 1
snd_hda_codec_realtek 244866 1
snd_hda_intel 20374 0
[Code]....
So this indicate that the driver is installed ,but i can hardly hear anything . I even tried installing "pavucontrol" but its of no use. As a last try ive tried installing sound drivers from Reltek website but ive got error while configuring.
I will tell you this: The hard ware is a MSI mother board [AMD flavored] [exact numbers, not known at the moment, but can be recovered]. The audio is built into the mother board. It worked fine with Ubuntu 10.04 I read a few posts here and there, and ran a hardware diagnostic. It came back and said no sound card was installed.
View 3 Replies View RelatedI'm running stable debian, installed mocp but the sound is too low even at 100% volume. Is there a way to amplify mocp sound at e.g. 140%? I use mocp with equalizer
[Code]....
but in equalizer config there's nothing about amplifaction..
I recently installed Linux - fedora 10. This is the first time im working with Linx, i have no idea about Linux OS. My problem is i cant hear any sound if i play any music. I have real player installed. I suspect that the fedora 10 is unable to detect my sound card. My sound card is inbuilt in motherboard(Intel).
View 10 Replies View RelatedI just installed 10.04 on my laptop (p105-s6024) and now the sounds doesn't work. I searched and tried a number of things, "aplay -l " returns:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 0/1
[code]....
I just installed ubuntu, and it seems the sound doesn't work with my sound card, it is part of the Intel ICH6 family. I don't get any output at all.
View 1 Replies View RelatedI just recently installed linux kubuntu 9.10 and for some reason it says sound card not installed. When I know its installed. When I boot it (I have dual boot) as windows it works just fine. My sound card is HDA ATI LSI Si3054
View 4 Replies View Relatedi just installed fedora 14 x86_64 on an external driver now everything works fine except that i don't have any sound comming out of my speakers so i think that my sound cart is not detected or the driver isn't installled (can't find a driver for linux to so i can't confirm)
View 6 Replies View Relatedi have a acer 8930g laptop with mint 7 installed can't get sound to work. found my way round the nvidia graphics to get the screen to work but lost when it came to get the pc speakers and sound card to worki have set the preferences to auto detect but at a loss as to the logical steps i need to take.
View 2 Replies View RelatedInstalled Wheezy. Audio players either stop with an error message about no sound, or they quietly play silence. Tried with gui and comand-line versions.
Mucking about with lspci indicates that I have two sound cards. News to me. I try "lspci | grep -i audio" and get
00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
I was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
Somehow I cannot get sound on my newly installed opensuse 11.3, KDE 64 bit..I tried the sound panel and it looks allright. I also followed the multimedia guide an installed packman repositiry and vlc, - i might have done it wrong?
View 9 Replies View RelatedAfter installing an external sound card, Im having some weird issues. The cards chipset is fully supported by suse, (CM8738) so I dont think thats the problem. Besides, I'm getting sound, but not in some applications. The system's sounds work just fine (login, logout themes) amarok plays without any problems, kaffeine, mplayer they all work flawlessly, in fact I can see the difference in quality between the onboard sound and my new card. However, no web browser is able to play any sound at all, firefox, opera or chrome, nothing,zip. Plus, vlc cant reproduce sound either, nor can smplayer.
I've tried switching channels on and off(muting)in kmixer and in alsamixer, on the console, with no results. I disabled the onboard audio on the bios before installing the new card, however my ati video card has integrated sound, which I cant disable.... I used to get this exact same problem randomly with the onboard sound, but I just had to go to kmixer and turn up the "pcm" channel volume, which was set to 0, and I had sound again on my browser. However this card's pcm channel is at max and turning it up or down affects the whole systems volume, not just the browser's. Is it better to just reinstall the sound system, if so how could I do that.
I bought a Diamond Xtreme Sound 5.1 sound card because I had read online that this card was a good choice with Linux and came with universal driver software. I installed the hardware correctly (as it works with WinXP) but I'm not able to get it working with Ubuntu.
View 1 Replies View RelatedI am trying to compile VLC code base on my Fedora5 system. I am getting the error when i am trying to run ./configure command.DBUS >=1.0.0. installed libdubs-dev is not installedwhat should I do. I have already installed DBUS (1.4.1).
View 4 Replies View Relatedi have to use lh command. I have installed all updates for ubuntu, live-build (the package for lh) and its updates. So my system is fully updated.When i hit "lh" command i get the following message: The program 'lh' is currently not installed. You can install it by typing:
sudo apt-get install live-build
When i do type: "sudo apt-get install live-build" i get:
Reading package lists... Done
Building dependency tree
Reading state information... Done
live-build is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.