Cannot for the life of me get my MX 5500 logitecheyboard/mouse combo to work with 10.04. It worked with 9.10 and 9.04 fine out of the box, but i upgraded my computer to the new version and suddenly it wont work at all. I have tried pairing it with the bluetooth manager to no avail. Did some research and i believe the problem is it wont switch over to CVS mode or something which would let it also work in the bios.
View 9 Replies
I am having difficulties to connect MX 5500 Keyboard and mouse through the Bluetooth dongle.
I am running on the latest kernel, 2.6.32.7, from Slackware64 current.
I have done some searches and followed the procedures below:
Quote:
Quote:
Quote:
Quote:
Restart my system.
Plug in the dongle with red button pressed.
Quote:
Press red button on the mouse back and issue the following command
Quote:
Can't get device information: Function not implemented
Same thing happened when I tried to connect keyboard.
What should I do to connect keyboard and mouse?
So i installed Linx 10.4, and attempted to get my webcam to work...
nothing at all!
It's a Logitech C200, webcam!
I'm trying to get my Logitech webcam to work. I don't know the exact model but it's a round globe.
Lsusb says-
Bus 002 Device 004: ID 046d:08f5 Logitech, Inc. QuickCam Messenger Communicate
I've tried Cheese, VLS but no video as of yet.
i am trying to video chat with my logitech C200 webcam but it does not work with skype or empathy. Do i need to download special drivers?. In skype i can't even test the camera. and with empathy the webcam icon and the video call option are grayed out. I downloaded "guvcview" from the software center and it works like a charm, i can capture video and take pictures, so i don't really understand why skype and emphaty dont work.
View 7 Replies View Relatedlogitech webcam pro5000 which does not work with my computer, the webcam does not work even if i plug it to different ports,especially when am using "skype linux beta",i tried searching for forums and threads and even videos but it seems my weak mind cannot absorb the technical explanations on the said sites,
View 1 Replies View Relatedwether the Logitech C270H webcam will work in 10.10. I don't see it mentioned in the approved list but the list is a bit outdated.
View 2 Replies View RelatedDoes anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.
View 2 Replies View RelatedI'm having a confusing time with this webcam. When I plug it in, dmesg shows it is recognised and needs the module gspca_spca561
Code:
[ 6644.595789] usb 1-6: new full speed USB device using ohci_hcd and address 4
[ 6644.707379] usb 1-6: configuration #1 chosen from 1 choice
[ 6644.752736] Linux video capture interface: v2.00
[code]....
However, there is no result in skype, ekiga, or awetv, although the device /dev/video0 is created. there was a kernel update from Ubuntu 2.6.24-23-generic to 2.6.24-24-generic, and the webcam magically started working, using a different module, gspca. However, after some celebration, I found that my usb tv dongle, which uses the dvb_usb_af9015 module, ceased working.
I corrected this by recompiling the dvb_usb_af9015 module, using source from http://linuxtv.org/hg/~anttip/af9015/ ----after another celebration, I found that the webcam had stopped working again, and I have not been able to make it work since, despite recompiling the gspca module from http://mxhaard.free.fr/download.html. Attempting to insert the gspca module produced from this gives:
Code:
insmod: error inserting 'gspca.ko': -1 Unknown symbol in module Another thing I've noted, is that the gspca module will work when I boot into earlier kernels (eg 2.6.24-21-generic).
I am running Xubuntu Lucid 10.04 on a Sony Vaio. I recently dropped $100 on a Logitech QuickCam Vision Pro for Mac, on the recommendation on the ubuntu wiki [URL].. that it would "work perfectly" in Skype. In Skype, it did nothing. No Audio, no video, light wouldn't even come on. Essentially a $100 dollar paperweight. I really think someone should correct this misleading information on the wiki.
I followed the kludge listed here [URL].. to get the video to work. By executing Skype with the shell script listed in the first post, I could get the video test to work, but no audio, and when I tried to call someone, when I turned on video, Skype quit suddenly. For the record, yes, I unmuted the device in the Sound Mixer in the top right corner.
Later on, I tested it with guvcview, and the cam worked perfectly in that program. It's only Skype that doesn't know what to do with it. When I execute Skype in Terminal I get the following output repeating over and over again:
Code:
X Error, request 20, minor 0, error code 3 BadWindow (invalid Window parameter)
X Error, request 15, minor 0, error code 3 BadWindow (invalid Window parameter)
libv4l2: error setting pixformat: Input/output error
libv4l2: error setting pixformat: Input/output error
[Code]...
I have a Logitech QuickCam Pro 9000 which works with Skype, Cheese, Ekiga, and Flash on Ubuntu 9.10 with no problems. (With Ubuntu 8.04, the video worked with all of these but Skype (couldn't test Skype as it was not available) but not the audio, which was one of the reasons I upgraded). It does not work with Flash in Ubuntu 10.04. Flash does not detect the camera though it does detect the microphone (and says it works, haven't tested it yet). It works (video and audio) with Skype and Ekiga. The video works with cheese and I can record my own voice with Sound Recorder off the webcam's mic.
I have looked at the webcam community documentation [URL]..and have visited Adobe's site [URL].. to click on "always allow". But that does not work either. Flash simply does not see the camera. The version of flash on both computers is the same (10,1,53,64).
I just got the logitech M555b BT mouse for my pavilion dv6500. how to get it working.
View 2 Replies View RelatedI'm using a basically vanilla Lubuntu 11.04 My Logitech E 3500 webcam works fine with Cheese. I have just installed Skype, but my voice isn't picked up on the test call, and no video either (the webcam light remains off). I've tried logging off and into Skype.
View 5 Replies View RelatedI've got a Logitech QuickCam Communicate STX webcam. According to this website, this webcam works under Linux; however, when I open Cheese, I get only a screen full of colored bars (like what you see on a television channel that's off-air), and in Skype I get green snow.
View 5 Replies View Relatedmy Logitech webcam C 200 under openSuse 11.2-2.6.31.5 appears as046d:0802, but in Skype I cannot see any image when testing the webcam. The correct audio input cannot be chosen either, it does not even appear in the drop-down box.I've installed the same webcam on a different machine with openSuse 11.2 and it worked out of the box, so I don't think there should be any additional driver required.
View 1 Replies View RelatedI have a rather old webcam, a Logitech quickcam messenger. This webcam was working fine with older linux kernel version, I think < 2.6.27. The gspca driver that makes this peripheral working has been merged into kernel sources, and I think that my webcam stopped working with this merge. I am a Slackware user, and until version 12.2 my webcam was working (I manually compiled and installed drivers). If I well remember, with version 13.0 (kernel 2.6.29) the video was full of strange artifacts, and with Slackware 13.1 (kernel 2.6.33) the webcam does not work at all. I am performing these tests with skype, that had videocalls fully working before gspca was merged into the kernel tree, while now I can only make phone calls.
This are the informations given by dmesg:
Code:
usb 3-3: new full speed USB device using ohci_hcd and address 6
usb 3-3: New USB device found, idVendor=046d, idProduct=08da
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
gspca: probing 046d:08da
[Code].....
I am trying to get a Logitech Webcam (not Quickcam) Pro 9000 to work with my SUSE 11.2 installation (specifically trying to get it to work with Skype 2.1). I am using the KDE environment. I've been reading the many posts and seem to be getting the point that I need to install the UVC driver from the webcam driver repo. However, the link I found to the repo seems to be for SUSE 11.1...?
Anyway, here is what I have done so far:I ran the following commands and got the following output:
localhost:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:0809 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
So I have a Logitech 9000 web cam installed and working (again) with Skype. That's great when I want to video chat with family, but that's all I can do with it. I would like to record some movies using my web cam but I can't because of the following reasons:
1. I can't find an application for Linux that actually works. So far they all fail to work for a variety of reasons.
2. The ones that sort of work, don't allow me to do what I want, record a video with my web-cam and save the file for future use or distribution.
I just want a simple application that allows me to click on record, stop recording and save. Why isn't there anything around that can do that? Seriously, this is something I have been looking for since, 2001. And so far I have only found one application that kind of worked, but it's no longer developed and I can't find it anymore.
[Code]...
So let's recap. In another thread I am trying to get .wmv files to play (they work on one system but not another?) and none of the applications for web cams work as I want. Oh, and wine? It's a joke, not one application I have tried to run with wine works. The either just don's start OR they start but half the components never paint and it runs like a flea in frozen molasses.
I am a bit frustrated and rather tired of not being able to easily do what Windows folk can do with relative ease. Something wrong with that. And I haven't even begun to tack text to speech yet.
I got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
[Code]...
I just installed ubuntu desktop version 10.10 on the laptop..it uses an ATI MOBILITY RADEON X700 everything worked fine except the monitor does not work properly after closing the lid/ suspend..... when it wake up from suspend, the monitor looks like as if it is broken
View 2 Replies View RelatedAfter I installed the driver for my AGP GeForce Fx 5500, the system is not booting. I followed some instructions on a website and I disabled "nouveau" in the grub.conf file and then I installed the driver for the VGA. I need to mention that I updated my system to the latest software updates. Anyway, after I installed the driver (which it seems it was wrong for my VGA), the system currently arrive to a step in booting which it's : Starting apt [ok]. After that the system is hanging and not able to enter the desktop.
View 14 Replies View Relatedtried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies View RelatedThis week I got a TV card partially working in Squeeze. It is a PCHDTV HD-5500, sold for use with Linux [URL]. It has a Conexant chipset and open drivers. The drivers are already in the current (Sept/Oct. 2010) Squeeze kernel, 2.6.3x.
TV reception is working with Xine and VLC (probably would be fine with mplayer too). My question is, how do I get video from the inputs on the back of the card?
There's a multi-thing that takes inputs from composite or S-video. I have one of those digital-to-analog boxes from the US TV conversion, and its composite output is plugged into the composite input of the card. Looking at the players, however, it is not obvious which device (or other input) to choose, or what settings should be. How can I make a player get the video from the plugged-in analog source?
I just updated CentOS 5 to latest kernel 2.6.18-128.2.1, but after reboot the new kernel crashes...If I witch to 2.6.18-92 kernel it works...
View 3 Replies View RelatedI have installed kmod-nvidia-173xx and done everything your guide says [URL], but after reboot I get a flashing _ . What can I do? nVidia has always been a pain to me on my obsolete graphics card.
View 14 Replies View RelatedThere I had legacy driver from nVidia but resolution was degraded to 640x320 and in their version 8.10 I cannot edit xorg.config (there was not anythig about resolution) I hoped in fedora i`ll fix this.
View 6 Replies View RelatedWhen I use the following command:
ssh user@ssh_server -L 5500:localhost:5500 -p 22
everything works fine. I can log in, and local port forwarding is done. Otherwise when I use the command:
ssh user@ssh_server -R 5500:localhost:5500 -p 22
I get an error "remote port forwarding failed for listen port 5500". However when I try remote port forwarding in WinXP by use of putty there is no problem...
I installed two apps that were supposed to give me more settings for my mouse. I installed from Synaptic and everything seemed to work fine, but I can't find anywhere to start the apps so I can do the adjustments. where I can find these to run them?
View 4 Replies View RelatedI have a set of logitech r20 speakers that I can't get working. Does anyone know where I can download a driver?
View 2 Replies View RelatedI'm having a very strange problem with my Logitech MX5000. It used to work fine but now I am experiencing some problems.When I start up my PC WITHOUT my spare wired keyboard plugged in, does not type more than one character -I mean only one character- after a random number of key presses (50-100 or more).However, if I start up my PC WITH my spare USB keyboard plugged in, my MX5000 works perfectly.Bluetooth (on) has recognized, installed and connected the keyboard. In fact, now, I am typing this message on MX5000 -with the wired keyboard connected to the PC.
View 1 Replies View Related
