What I'm trying to do is set up my quickcam to stream video to a web page for zone minder to pick up. If that makes any sense.
Here is the error that I'm getting:
Code:
libavutil 50.15. 1 / 50.15. 1
libavcodec 52.72. 2 / 52.72. 2
libavformat 52.64. 2 / 52.64. 2
[Code]....
an't get my webcam to work. with anything, letalone skype. lsusb feedback Bus 002 Device 002: ID 046d:08af Logitech, Inc. QuickCam Easy/Cool
[Code]...
my logitech quickcam zoom works out of the box for taking local pics and local videoshots. It's seen by Cheese, camorama, However, it doesn't work on aMSN, nor on any video-enabled website. lsusb tells me: Bus 004 Device 003: ID 046d:08b4 Logitech, Inc. QuickCam Zoom
Is there someone around who has got their logitech quickcam zoom to work and is willing to share his/her knowledge?
I'd like to install a Logitech webcam with built-in microphone in order to use it in Skype.
It seems to been recognized :
And softs links seems to be created :
Code:
I can't understand the last line... I also got trouble with Adobe Flsah Square flash 64 bits and it may be related to it.
I do not know where looking for. Here are the output of Webkam and Wxcam.
I am running Xubuntu Lucid 10.04 on a Sony Vaio. I recently dropped $100 on a Logitech QuickCam Vision Pro for Mac, on the recommendation on the ubuntu wiki [URL].. that it would "work perfectly" in Skype. In Skype, it did nothing. No Audio, no video, light wouldn't even come on. Essentially a $100 dollar paperweight. I really think someone should correct this misleading information on the wiki.
I followed the kludge listed here [URL].. to get the video to work. By executing Skype with the shell script listed in the first post, I could get the video test to work, but no audio, and when I tried to call someone, when I turned on video, Skype quit suddenly. For the record, yes, I unmuted the device in the Sound Mixer in the top right corner.
Later on, I tested it with guvcview, and the cam worked perfectly in that program. It's only Skype that doesn't know what to do with it. When I execute Skype in Terminal I get the following output repeating over and over again:
Code:
X Error, request 20, minor 0, error code 3 BadWindow (invalid Window parameter)
X Error, request 15, minor 0, error code 3 BadWindow (invalid Window parameter)
libv4l2: error setting pixformat: Input/output error
libv4l2: error setting pixformat: Input/output error
[Code]...
I have a Logitech QuickCam Pro 9000 which works with Skype, Cheese, Ekiga, and Flash on Ubuntu 9.10 with no problems. (With Ubuntu 8.04, the video worked with all of these but Skype (couldn't test Skype as it was not available) but not the audio, which was one of the reasons I upgraded). It does not work with Flash in Ubuntu 10.04. Flash does not detect the camera though it does detect the microphone (and says it works, haven't tested it yet). It works (video and audio) with Skype and Ekiga. The video works with cheese and I can record my own voice with Sound Recorder off the webcam's mic.
I have looked at the webcam community documentation [URL]..and have visited Adobe's site [URL].. to click on "always allow". But that does not work either. Flash simply does not see the camera. The version of flash on both computers is the same (10,1,53,64).
Inspired by some recent posts from oldcpu I decided to grab some audio from my Logitech webcam, just for the fun of it. openSUSE 11.3 i586 is in use.
Code:
> lsusb
Bus 002 Device 003: ID 046d:0991 Logitech, Inc. QuickCam Pro for Notebooks
> arecord -l
**** Liste der Hardware-Geräte (CAPTURE) ****
Karte 0: Intel [HDA Intel], Gerät 0: ALC892 Analog [ALC892 Analog]
[Code]...
It works! Though I have to say that the audio quality is mediocre (to say the best). I blame it on the quality of the built-in microphone of this camera. It sounds like it was recorded in a giant bathroom.
I'm attempting to make my Logitech Quickcam Express work with Ubuntu 10.04.I what may be the problem but it doesn't seem to work with any of the applications so far. I visited [URL] and attempted to extract and compile the drivers but ran into problems.
Code:
incarnation@incarnation-desktop:~/Desktop/qc-usb-0.6.6$ make all
make -C "/lib/modules/2.6.32-22-generic/build" SUBDIRS="/home/incarnation/Desktop/qc-usb-0.6.6" modules V=1 USER_OPT="-DHAVE_UTSRELEASE_H=1"
[code]....
I have two computers--a Zareason machine (no details yet) running 8.04. I also have a Dell 1525N laptop running 9.10. I purchased recently a Logitech QuickCam Pro 9000 Webcam. The video works on both systems with Ekiga and Cheese. I can also see the video in Flash applications (but *not* in Meebo even with the other person logged into Meebo). (Both computers are running the latest Flash plugins).
However, the built-in microphone is problematic. With 8.04, I get playback when I test it under System|Preferences|Sound--but with lots of echo. But I get no sound with any Flash chat applications. I've not been able to test it with Ekiga as the testee (a Windows 7 user) can't get Ekiga to work on his machine (probable Windows firewall issues). I haven't installed Skype because Skype pulled its 8.04-compliant .deb packages and I've not tried yet to compile it from source code.
With 9.10, the webcam works with Cheese (video) and I can get both webcam and mic to work with Skype. (Again, no test result possible for Ekiga until I get a testee). However--my Win7 testee friend says that when I log into Googlechat using Pidgin on my 9.10 laptop, a webcam icon appears next to my userID telling him that I have an open webcam (even when there's NONE actually plugged in). He doesn't see the same icon when I log into my 8.04 desktop with no webcam plugged in. I have searched Pidgin and my System preferences and see no evidence that any of these applications or my system sees a webcam that's not there.
So--how to get the mic to work? (I am thinking the simplest answer will be to simply upgrade my desktop to Lucid). And also, why the webcam icon in Googlechat even when no webcam is plugged in on my 9.10 laptop??
I've browsed the forums on how to make the Logitech Quickcam Messenger webcam work. The problem I am running into is that the one and only website that seems to have the patch is[URL]...This website seems to be defunct. So does anyone have this patchfile or know where I can find it? Or some other option or work around?
View 3 Replies View Relatedhow to install a logitech quickcam pro500
View 4 Replies View RelatedCode:
lsusb
046d:08af Logitech, Inc. QuickCam Easy/Cool
Apparently, this webcam uses the gspca2 driver. The gspca modules are loaded but if I try using a program like cheese it tells me no device was detected.
Code:
hwinfo --usb
17: USB 00.0: 11200 TV Card
[Created at usb.122]
Unique ID: YccR.9AtOl3Z230E
[Code]....
If I do a modprobe -rf gspca_zc3xx and then modprobe gspca_zc3xx I see the light blink a couple times, but it still doesn't work in cheese.
I have a USB Logitech Quickcam (not sure what model) and I'm trying to simply get some live video running in UCView. I've compiled a bunch of device drivers into my kernel, including Video4Linux, Quickcam BW and Quickcam Colour (some logical choices). However, I am unable to get anything from my Quickcam. Regardless of whether the camera is plugged in, I can run UCView and get a video of scrolling colors, like the attached picture.
This is coming from /dev/video0. I just don't know how I can somehow hook up my quickcam to a video device.
I'm having a confusing time with this webcam. When I plug it in, dmesg shows it is recognised and needs the module gspca_spca561
Code:
[ 6644.595789] usb 1-6: new full speed USB device using ohci_hcd and address 4
[ 6644.707379] usb 1-6: configuration #1 chosen from 1 choice
[ 6644.752736] Linux video capture interface: v2.00
[code]....
However, there is no result in skype, ekiga, or awetv, although the device /dev/video0 is created. there was a kernel update from Ubuntu 2.6.24-23-generic to 2.6.24-24-generic, and the webcam magically started working, using a different module, gspca. However, after some celebration, I found that my usb tv dongle, which uses the dvb_usb_af9015 module, ceased working.
I corrected this by recompiling the dvb_usb_af9015 module, using source from http://linuxtv.org/hg/~anttip/af9015/ ----after another celebration, I found that the webcam had stopped working again, and I have not been able to make it work since, despite recompiling the gspca module from http://mxhaard.free.fr/download.html. Attempting to insert the gspca module produced from this gives:
Code:
insmod: error inserting 'gspca.ko': -1 Unknown symbol in module Another thing I've noted, is that the gspca module will work when I boot into earlier kernels (eg 2.6.24-21-generic).
I am trying to get Skype working, the only problem is the webcam, in the test video all I get is a black screen.
After some research I found this command to get Skype to work with my webcam, as you can see there are a few errors.
Below is a listing of of /usr/lib/libv4l/ directory
Other than the video, eveything seems to be working.
This is on Skype 2.2, Skype 2.1 was the same. webcam works fine.
If this sounds like a repost, that's because it is. I'm reposting because the problem is still here, nothing has changed. It's been well over a year now since I bought this damn webcam (thinking it would work because I got indications that it was known to be Linux compatible) and I'm still no closer to any sort of solution.
I can start Cheese, press record, and get a perfectly functional video. But despite my webcam having a microphone and despite ALSA detecting it (refer to old topic) I get no sound. Just complete silence. I can't even confirm whether this is a hardware or software problem because I don't know any way to test it because no one even seems to want to look at the problem! I actually want to make some videos now, but I can't because of this problem. Edit: I just tried this with our second, less powerful PC running Ubuntu Karmic. It worked. I got sound out of the webcam. That's confirmation to me that this is a problem with Debian and not with the webcam. So why does it produce sound on another PC using Ubuntu Karmic and GNOME, but not on this PC using Debian testing/unstable with KDE?
I am looking for drivers for my Logitech quickcam pro 3000 webcam. I can not get my webcam to work in linux.
View 4 Replies View RelatedI've got a Logitech QuickCam Communicate STX webcam. According to this website, this webcam works under Linux; however, when I open Cheese, I get only a screen full of colored bars (like what you see on a television channel that's off-air), and in Skype I get green snow.
View 5 Replies View RelatedIn vlc, cheese I'm getting only this resolution.
[ 464.100250] uvcvideo: Adding mapping Brightness to control 00000000-0000-0000-0000-000000000101/2.
[ 464.100262] uvcvideo: Adding mapping Contrast to control 00000000-0000-0000-0000-000000000101/3.
[ 464.100270] uvcvideo: Adding mapping Hue to control 00000000-0000-0000-0000-000000000101/6.
[ 464.100279] uvcvideo: Adding mapping Saturation to control 00000000-0000-0000-0000-000000000101/7.
[ 464.100287] uvcvideo: Adding mapping Sharpness to control 00000000-0000-0000-0000-000000000101/8.
[ 464.100295] uvcvideo: Adding mapping Gamma to control 00000000-0000-0000-0000-000000000101/9.
[ 464.100304] uvcvideo: Adding mapping Backlight Compensation to control
[Code]...
Somewhy it is using YUY, but not MJPEG, although seems MJPEG can give larger resolution. How to get it? Single shot 1,3MPix technically possible, any way to do that?
After upgrading Ubuntu to 10.04, my Logitech, Inc. QuickCam Orbit/Sphere AF now has a blue tint in both Skype and guvcview (So probably everything).
Anyone run into this problem? I am going to run my updates to see if this helps for the time being.
I have a rather old webcam, a Logitech quickcam messenger. This webcam was working fine with older linux kernel version, I think < 2.6.27. The gspca driver that makes this peripheral working has been merged into kernel sources, and I think that my webcam stopped working with this merge. I am a Slackware user, and until version 12.2 my webcam was working (I manually compiled and installed drivers). If I well remember, with version 13.0 (kernel 2.6.29) the video was full of strange artifacts, and with Slackware 13.1 (kernel 2.6.33) the webcam does not work at all. I am performing these tests with skype, that had videocalls fully working before gspca was merged into the kernel tree, while now I can only make phone calls.
This are the informations given by dmesg:
Code:
usb 3-3: new full speed USB device using ohci_hcd and address 6
usb 3-3: New USB device found, idVendor=046d, idProduct=08da
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
gspca: probing 046d:08da
[Code].....
Ubuntu 9.10
Quickcam Pro 9000
Logitech USB Headphones
[Code].....
I'm driven quite insane on why nothing is either working or teasing me. I DO NOT want to record on Windows. I have a lag problem with fps there, anway. Seems like guvcview is my best option, but I can't get it to detect anything.
Does anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.
View 2 Replies View RelatedI just upgraded to ubuntu 10.04 and everything is ok except my USB Logitech Headset. The problem is that volume of the device is very low and I can't hear the music or any sound like I use to heard. Even if I increase the volume up to 100%, I still hearing the sound with a very low volume. But if I use the analog output of my sound card I can hear very well. I remember that i used to have this problem in ubuntu 9.10 but I fixed with a script that I found it in this forum, but I can't find it again.
:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:0a01 Logitech, Inc. USB Headset
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04fc:0c25 Sunplus Technology Co., Ltd SATALink SPIF225A
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
It was working just fine with 9.10. After upgrading to 10.0.0.4 I' m getting a very low output, almost inaudible.
HTML Code:
Just found my old Logitech webcam again, and tried to get it to work on 10.04. Somehow this doesn't work. I tried searching the forum, but did not get an answer to my situation.
Here is what I can see:
After connecting (or rebooting), dmesg shows the following lines
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08cc)
input: UVC Camera (046d:08cc) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input5
usbcore: registered new interface driver uvcvideo
And that's it. No message that cam was registered to /dev/video<x>. I should add that I already have another cam (Philips) that works and is registered to /dev/video0, and I also installed a Hauppauge PVR350 card that also gets registered to various /dev/video<y> files. Why the Logitech cam won't register? I'm guessing I can't do anything until this cam has its own /dev/video<x>, right?
So i installed Linx 10.4, and attempted to get my webcam to work...
nothing at all!
It's a Logitech C200, webcam!
I'm trying to get my Logitech webcam to work. I don't know the exact model but it's a round globe.
Lsusb says-
Bus 002 Device 004: ID 046d:08f5 Logitech, Inc. QuickCam Messenger Communicate
I've tried Cheese, VLS but no video as of yet.
I upgraded recently to Ubuntu 11.04 and have been trying unsuccessfully since to use an old webcam: Logitech Quickcam Messenger. The system doesn't recognize it at all as far as I can tell, which it did on 10.10 (I didn't really use it then, I just remember I could get a picture at some point.
View 1 Replies View RelatedI want to stream .avi *divx/xvid* (because of the nice compression and quality) online and have all streams accessible through a web based library type thing. Something like Jinzora ( http://en.jinzora.com/ ) is what I am looking for, but it's buggy. I would even be satisfied with a web based library of streams that you click and open with an external program. I have searched a lot for this and the only thing I found that can do this how I want (if it worked right) was jinzora. I don't want to convert to mpeg4 or flv because of size and quality issues.
View 5 Replies View Related