Ubuntu Networking :: Use SWAT To Configure Samba.conf?
Jul 21, 2010I am trying to use SWAT to better configure Samba.conf I have swat installed and working but it is missing the GLOBAL button which is its main configuration tool?
View 3 Replies
ADVERTISEMENT
Fedora Installation :: Configuration Of Swat And Samba ?
Jan 8, 2010The configuration of swat and samba. I have tried the vi edit approach but there is no save option so after I edit it and close it, it just says the terminal is in the middle of a process and closing will kill it or something to that effect. Of course then it doesn't save the changes. That reminds me that I do su to root before I do this. I have also tried the pam edit in order to allow myself to log on to root from the gui but that doesn't work either. Am I missing something? I can't imagine how you are supposed to configure anything if it won't let you even in root. Would the fact that my user and root passwords are the same effect this in anyway? I'm desperate as this is for a school project and obviously I'm new to linux.
View 2 Replies View RelatedGeneral :: Config SWAT For Samba On Fedora 14?
Mar 23, 2011Ive followed this:
[URL]
SWAT service is running
Firewall is disabled
disable is saved in this file.
Doesnt work. http://localhost:901
What to do to diagnose this? What to check?
Server :: Install And Configure Swat On Rhel5?
Jan 7, 2010I want to install swat on rhel5. how to install it on rhel5.
View 1 Replies View RelatedUbuntu Networking :: /etc/samba/smb.conf Not Found?
Apr 30, 2010I'm running ubuntu 10.04 and I need to set up samba. I haven't used samba since ubuntu 8.10 and I don't know if there have been changes that I'm not aware of. I remember it being a simple process that started with editing the configuration file, but I keep getting this message:
Code:
/etc/samba/smb.conf': No such file or directory
Am I missing something? Has the configuration file changed names?
Networking :: Configure Squid.conf When It Is Functional?
Jan 20, 2011I am using Squid server on my Red Hat Linux machine.Squid is functional and clients are access through proxy.I want to ask that if I want to open my squid.conf file for any changes should i first stop squid and then do the changes .
View 3 Replies View RelatedUbuntu Networking :: Every Time Restart Have To Configure Internet Using PPPOE CONF
Jul 25, 2010i configured my laptop (running UBUNTU 10.04 LTS) for my broadband (bridge mode). I did that using PPPOE CONF command. Everything goes ok but only prob is i have to run this command and configure my net every time i restart my system. What i need is it should connect to the net whenever i use the PON DSL-PROVIDER and must turn off by using POFF..
View 1 Replies View RelatedNetworking :: Creating Subfolder Permission Through Samba File (smb.conf)?
Dec 31, 2009I have three users in samba file user1
user2
user3
and I have share1 and its subfolder " subshare " the thing i have to do is that, i have 2 assign user1 and user2 to share1 that means user1 and user2 can only access share1 through password and user3 can access only its subfolder "subshare" i have done this upto first level permission of share1 not able to do for its subfolder "subshare"
Ubuntu Networking :: Samba Share Denies Write, Smb.conf Snippet Included?
Aug 10, 2010I'm a very -slightly- advanced Samba user. I believe I know the basics of editing the smb.conf and I know to use smbpasswd to update the Samba users database.I have a group of identical shares.They are readOnly for the group @movies-play and they are (supposed to be) writeable by specific users. The readOnly group works great, no prob there, but I cannot get write access for the specified users. They are in the Samba user database using smbpasswd -a mark and neelix.Here is the share section in my smb.conf...
Code:
[movies-usb3]
path = /media/usb3/movies
guest ok = no[code]....
I have the workgroup and netbios info set. I have security=user set. The folder 'movies' in the path above is owned by 'mark' so it seems I should be able to write in it but I can't.I'm connecting to the share (it's on a server running Lucid) from my laptop (running Lucid. I added this mount info to fstab...
Code:
//spock/movies-usb3 /media/spockmovies3 cifs credentials=/home/mark/.smbpasswd 0 0
Of course spock in the hosts file so it resolves. I can see the share fine, just can't write.
Fedora Networking :: Configure Default Samba On 12
Dec 22, 2009setting up samba! I am a frequent user of FreeBSD and Ubuntu. Those two automatically display the workgroups in my workplace when I use them after installing with no configuration at all. They just work out of the box! How can I configure samba in the same way in Fedora 12 so that I can access the workgroup shares at work? Fedora 12 works like a charm on my laptop. Ubuntu crashes every so often! That's why I am sticking to Fedora 12. My Workplace computers run FreeBSD
View 12 Replies View RelatedNetworking :: Configure Rights On A Samba Share?
Jun 12, 2009What I am tring to do is give all users of group users rwe any files/directories of a samba share execpt for the top level.Top Level cotains a number of folders and a readme file and should be r-eSublevel should be rwe including files/dir they did not create.I'm am familure with chmod/chgrp but not sure how to do this.
View 1 Replies View RelatedNetworking :: Configure Nfs Mount Disk To Samba Share For Windows Client ?
Nov 8, 2010I am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.
View 2 Replies View RelatedUbuntu :: Can't Configure Wacom Tablet In Xorg.conf
Feb 4, 2010I have a wacom graphire3 tablet and two monitors. The tablet is workin properly with out of the box drivers.
As well as the dual monitors configured as twinview through Nvidia X server. But the tablet is mapped for the two screens, then I searched the forums for a proper configuration and it it tells me to edit the xorg.conf file for twinview horizontal but, it don't make any difference. I've "sudo gedit" edited the xorg.conf and nothing happens. Nothing, the tablet is working properly, the system is stable and it's still mapped for two screens.
What can I do? The xorg.conf also isn't listing all my hardware, I can't see the confs for my mouse. I'm on karmic koala.
Ubuntu :: Configure Xorg.conf File In Lucid?
Jun 8, 2010All I need to do is get my screen resolution to 1024x768, I can currently only get 800x600 and that's unacceptable for school. I created an xorg.conf file in Lucid and it does in fact refer to and use it. what led me to believe that is when I looked in the mirror and noticed smoke slowly rolling out of my ears! After replacing some of that smoke with a cigarette I decided to make this thread. As I said, I created the xorg.conf.new file with:
Code:
sudo Xorg -configure from recovery mode. And then moved it to its proper place with:
Code:
cp /home/william/xorg.conf.new /etc/X11/xorg.conf
And that nested it right where it needs to be. X does in fact use it as confirmed by my Xorg.0.log.
Now I have an xorg.conf file, but am quickly becoming overwhelmed with information as to what to do. I've tried to create mode lines with xrandr, which gave me new settings, but I was unable to use them. Obviously the EDID info. is not being read because there is no mention of clock speed, Vsync or Hsync in my Xorg.0.log either. I have tried many things and really don't have time to spend all day at my computer, at least not with this issue. I'm in school and have to focus primarily on that right now. I will give what info I know is relevant starting with my monitor specs:
Dynex DX-LCDTV19
vertical resolution: 720 p
aspect ratio: 16:10
screen refresh rate: 60hz
comb filter: 3D/YC digital
[Code].....
General :: Cannot Configure SNMPD.conf In Slackware
Jun 28, 2011I m trying to find an answer for this matter. I have download the SNMP version which I am concerned due to the following problems. I am trying to configure the SNMPD.conf and I cannod find any tutorial on the internet.
I downloaded the following product.
Linux version :
Linux version 2.6.18 (root@srv03) (gcc version 3.3.6) #1 SMP Sat Sep 23 19:32:53 BRT 2006
SNMP
net-snmp-5.4.2.1-i486-1_slack12.0.tgz
when I run the command snmpd I have the following problems
root@srv03:~# snmpd
snmpd: /lib/libc.so.6: version `GLIBC_2.4' not found (required by snmpd)
I dont know how to configure the SNMPD.conf there is anyway
OpenSUSE Install :: Can't Use Xorg.conf To Configure X And Everything Is Autodetected By HAL
Jan 18, 2010Anyone experience with multiseat configuration in combination with openSUSE 11.2. Looking for a howto since we don't use xorg.conf to configure X and everything is autodetected by HAL.
View 1 Replies View RelatedProgramming :: Configure Httpd.conf To Parse .php Files?
Jul 5, 2010what's the difference between the following 2 methods for specifying in httpd.conf to use PHP to parse files with extension .php?
Method 1
AddType application/x-httpd-php .php
Method 2
LoadModule php5_module modules/libphp5.so
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>
Ubuntu Servers :: Internet Printer - Configure In The Cupsd.conf File To Put It Online?
Oct 20, 2010I need to get my printer assigned to a hostname "myhost.dyndns.org". What do I need to configure in the cupsd.conf file to put it online?
View 1 Replies View RelatedDebian Configuration :: HowTo Configure Touchpad Without Xorg.conf
Feb 2, 2010for some reason I got taping on touchpad is disabled after some software upgrade or something.I can enable it with synclient TapButton1=1, etc.. but have got to do it every time I reboot. Also, I don't have Xorg.conf file. Is there any way I can configure taping to work permanently ?
View 6 Replies View RelatedDebian Hardware :: Configure Xorg.conf - Don't Get Required Resolution
Aug 17, 2011I've created the file from new in /usr/share/X11 and then added to lines from GTF. I@ve restarted Xorg by killing the PID then restarting and I don't get this resolution unfortunately
[Code]...
Hardware :: Can't Configure Stable Xorg.conf For Triple Head
Aug 25, 2010I currently have 2 GPUs in my system both ATI. The primary is a HD4870 and the secondary is a HD4350.
I have a 24" and a 17" running in twin view from the 4870 but I can't figure out a way to enable my third monitor to display anything at all, I have tried multiple configurations but I end up breaking the xorg every time.
All I simply want to do is keep my twinview on the monitors run by the 4870 but have the third monitor as a separate X session so I can still use compiz. Here is my xorg file, it was generated by aticonfig.
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
[Code].....
Software :: Setting Up CUPS / Configure Cupsd.conf For Security?
Apr 21, 2010Using Debian Lenny.I am new to printing with Linux and would like some help with CUPS. I have CUPS set up to work with my printer.I read through the documentation, but still have some problems.
1. How should I configure cupsd.conf for security?
Quote:
Portwalling
* By default, cups will listen on every interface. Unless you want to offer your printer to the world, you must block this.Although you can firewall this (and that is a good idea anyway),you can also not have cups listen on your Internet connection.This also prevents any possibility of a root exploit from the Internet. Of course, you still have internal crackers to worry about...
* In cups.conf, comment out the lines:
Port 80
Port 631
* Replace them with:
Listen 127.0.0.1:631
code....
How do I create a symbolic link between programs?When I opened Xpp it said Printer:destination not available.
4. Can I adjust the text size on text, pdf or html files with Cups or do I need another program for this?
Slackware :: Getting A Segmentation Fault And Cannot Configure A Working Xorg.conf?
Mar 1, 2011I did fresh install of Slackware64 ver. 13.0 and immediately updated it to slackware-current by following the directions here: http://slackwiki.org/Upgrading_SlackwareSo far all is normal and functional except for xorg-server.When I did Xorg -configure under ver.13.0, it worked perfectly and detected my nvidia 8800 GTS vidcard and 1440 x 900 lcd monitor.However, after upgrading to "current" and xorg-server-1.9.4, I'm getting a segmentation fault and cannot configure a working xorg.conf.I've been searching xorg seg errors, but haven't found a solution yet.My /var/log/Xorg.0.log:
[ 234.357]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[code]....
General :: Make Samba Read Updated Smb.conf File Without Restarting That?
Apr 5, 2011I just made a minor change to the smb.conf file, is there a way to force the samba service to read that change without restarting samba completely?
View 6 Replies View RelatedDebian Multimedia :: X -configure Segfaults - Sid - Cannot Create Xorg.conf To Get A Correct Resolution
May 13, 2010I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.
View 6 Replies View RelatedGeneral :: Configure Samba In Ubuntu 9.10?
Mar 30, 2010i am working in a office where a printer is shared and we can get xerox from it through windows...but in linux i cannot access the printer...i have managed to install the printer driver in ubuntu 9.10..it is installed ...but to share a printer which is installed on windows platform it cannot recognize...how can i share that printer
View 3 Replies View RelatedServer :: How To To Install Swat Utility
May 25, 2010I am using RHEL 9 I want to install swat utility on this,where i can download the RPMs of?
1. samba-comman
2. samba-utils
3. swat
CentOS 5 :: Unable To Connect To Swat
Aug 24, 2009I just installed swat, but I'm unable to connect. I read the "man swat" file and it says that I have to modify the /etc/inet.d/swat file, which in my install does not exist; however, I found the /etc/xinetd.d/swat file, and I edited setting disable=no, and also setting only_host=to my ip address. After that I restarted the server "service xinetd restart" because "service inetd restart" doesn't work, so I checked if the port was listening with netstat -l | grep 901. Again no service is listening on that port..
View 1 Replies View RelatedCentOS 5 :: Connections Refused When Try To Use SWAT
Jan 28, 2010I've got SAMBA and SWAP installed. I tried to localhost:901 and telnet localhost 901 And both connections tries were refused. I opened the port and even shut down iptables. What else do I need to do to use SWAT?
View 1 Replies View RelatedUbuntu Servers :: Configure Samba With Roaming Profiles
May 27, 2010I want to create an extra Ubuntu Server for storing roaming profiles,
I got: One Win2k8 server as Domain controller. One Ubuntu 9.10 server who is a member of the domain using Samba. Winbind is working correctly.. I can at least connect to shares with user names of the AD. Anyway my client (WinXP) currently logs on to the AD and works from there. I want to configure it so that all accounts are going to use roaming profiles, but here it comes... I want to store the roaming profiles on the extra Ubuntu server.
