General :: Cannot Configure SNMPD.conf In Slackware

Jun 28, 2011

I m trying to find an answer for this matter. I have download the SNMP version which I am concerned due to the following problems. I am trying to configure the SNMPD.conf and I cannod find any tutorial on the internet.

I downloaded the following product.

Linux version :

Linux version 2.6.18 (root@srv03) (gcc version 3.3.6) #1 SMP Sat Sep 23 19:32:53 BRT 2006

SNMP

net-snmp-5.4.2.1-i486-1_slack12.0.tgz

when I run the command snmpd I have the following problems

root@srv03:~# snmpd
snmpd: /lib/libc.so.6: version `GLIBC_2.4' not found (required by snmpd)

I dont know how to configure the SNMPD.conf there is anyway

View 1 Replies


ADVERTISEMENT

General :: Check The Snmpd Is Really Running Apart From Service Snmpd Status?

Feb 8, 2010

I have six linux Centos 5.0 Servers. I had to configure the snmp client. I just created a pretty basic configuration snmpd.conf file

Code: rocommunity CompanyCom 10.1.1.10

I installed all of these

lm_sensors-2.10.7-4.el5.i386.rpm
net-snmp-libs-5.3.2.2-7.el5.i386.rpm
net-snmp-5.3.2.2-7.el5.i386.rpm
net-snmp-utils-5.3.2.2-7.el5.i386.rpm

4 of them are working fine, the application installed on 10.1.1.10 can query 4 servers but I got 2 Linux Centos that are in a DMZ, and my networking team already opened ports and configured NAT but the SNMP Server 10.1.1.10 is not able to query them how can I check the snmpd is really running apart from service snmpd status? might be related with the DMZ configuration?

View 3 Replies View Related

Slackware :: Getting A Segmentation Fault And Cannot Configure A Working Xorg.conf?

Mar 1, 2011

I did fresh install of Slackware64 ver. 13.0 and immediately updated it to slackware-current by following the directions here: http://slackwiki.org/Upgrading_SlackwareSo far all is normal and functional except for xorg-server.When I did Xorg -configure under ver.13.0, it worked perfectly and detected my nvidia 8800 GTS vidcard and 1440 x 900 lcd monitor.However, after upgrading to "current" and xorg-server-1.9.4, I'm getting a segmentation fault and cannot configure a working xorg.conf.I've been searching xorg seg errors, but haven't found a solution yet.My /var/log/Xorg.0.log:

[ 234.357]
X.Org X Server 1.9.4
Release Date: 2011-02-04

[code]....

View 14 Replies View Related

General :: Filter Snmpd Entries From /var/log/messages

Mar 11, 2011

All, i am receiving numerous entries for programs such as snmpd in my messages file. Is there a way to add a rule somewhere to have these and other annoying unimportant entries go to /dev/null or something?

I tried adding an entry to /etc/syslog.conf, but that hosed any logging into the messages file, so maybe i added it wrong?

I want to try and do this with out installing anything additional.

View 6 Replies View Related

General :: Big Fonts After Xorg.conf Edit - Slackware 12.2

Mar 9, 2010

After i edited my xorg.conf file to get 1280x1024 Resolution the font size in some programs is really big. [url]

View 2 Replies View Related

Slackware :: Difference Between Files (xorg.conf And Xorg.conf-vesa)?

Feb 16, 2011

1. What is the difference between files (xorg.conf and xorg.conf-vesa)

2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from

[Code]...

View 3 Replies View Related

Slackware :: Adding The Slackware To Grub.conf

Apr 9, 2011

I boot my slackware through usb and I don't install lilo. I want to add slackware to fedora grub.conf.I have tried some methods,but failed. How can I do? fedora grub.conf

Quote:

title Fedora (2.6.35.10-72.fc14.x86_64)
root (hd0,5)
kernel /vmlinuz-2.6.35.10-72.fc14.x86_64 ro root=UUID=5cc13bf9-725f-

[cod3e]....

View 14 Replies View Related

Networking :: Configure Squid.conf When It Is Functional?

Jan 20, 2011

I am using Squid server on my Red Hat Linux machine.Squid is functional and clients are access through proxy.I want to ask that if I want to open my squid.conf file for any changes should i first stop squid and then do the changes .

View 3 Replies View Related

OpenSUSE Install :: Can't Use Xorg.conf To Configure X And Everything Is Autodetected By HAL

Jan 18, 2010

Anyone experience with multiseat configuration in combination with openSUSE 11.2. Looking for a howto since we don't use xorg.conf to configure X and everything is autodetected by HAL.

View 1 Replies View Related

Ubuntu :: Can't Configure Wacom Tablet In Xorg.conf

Feb 4, 2010

I have a wacom graphire3 tablet and two monitors. The tablet is workin properly with out of the box drivers.

As well as the dual monitors configured as twinview through Nvidia X server. But the tablet is mapped for the two screens, then I searched the forums for a proper configuration and it it tells me to edit the xorg.conf file for twinview horizontal but, it don't make any difference. I've "sudo gedit" edited the xorg.conf and nothing happens. Nothing, the tablet is working properly, the system is stable and it's still mapped for two screens.

What can I do? The xorg.conf also isn't listing all my hardware, I can't see the confs for my mouse. I'm on karmic koala.

View 3 Replies View Related

Ubuntu :: Configure Xorg.conf File In Lucid?

Jun 8, 2010

All I need to do is get my screen resolution to 1024x768, I can currently only get 800x600 and that's unacceptable for school. I created an xorg.conf file in Lucid and it does in fact refer to and use it. what led me to believe that is when I looked in the mirror and noticed smoke slowly rolling out of my ears! After replacing some of that smoke with a cigarette I decided to make this thread. As I said, I created the xorg.conf.new file with:

Code:
sudo Xorg -configure from recovery mode. And then moved it to its proper place with:

Code:
cp /home/william/xorg.conf.new /etc/X11/xorg.conf

And that nested it right where it needs to be. X does in fact use it as confirmed by my Xorg.0.log.

Now I have an xorg.conf file, but am quickly becoming overwhelmed with information as to what to do. I've tried to create mode lines with xrandr, which gave me new settings, but I was unable to use them. Obviously the EDID info. is not being read because there is no mention of clock speed, Vsync or Hsync in my Xorg.0.log either. I have tried many things and really don't have time to spend all day at my computer, at least not with this issue. I'm in school and have to focus primarily on that right now. I will give what info I know is relevant starting with my monitor specs:

Dynex DX-LCDTV19
vertical resolution: 720 p
aspect ratio: 16:10
screen refresh rate: 60hz
comb filter: 3D/YC digital

[Code].....

View 7 Replies View Related

Ubuntu Networking :: Use SWAT To Configure Samba.conf?

Jul 21, 2010

I am trying to use SWAT to better configure Samba.conf I have swat installed and working but it is missing the GLOBAL button which is its main configuration tool?

View 3 Replies View Related

Programming :: Configure Httpd.conf To Parse .php Files?

Jul 5, 2010

what's the difference between the following 2 methods for specifying in httpd.conf to use PHP to parse files with extension .php?

Method 1
AddType application/x-httpd-php .php
Method 2
LoadModule php5_module modules/libphp5.so
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>

View 2 Replies View Related

Debian Configuration :: HowTo Configure Touchpad Without Xorg.conf

Feb 2, 2010

for some reason I got taping on touchpad is disabled after some software upgrade or something.I can enable it with synclient TapButton1=1, etc.. but have got to do it every time I reboot. Also, I don't have Xorg.conf file. Is there any way I can configure taping to work permanently ?

View 6 Replies View Related

Debian Hardware :: Configure Xorg.conf - Don't Get Required Resolution

Aug 17, 2011

I've created the file from new in /usr/share/X11 and then added to lines from GTF. I@ve restarted Xorg by killing the PID then restarting and I don't get this resolution unfortunately

[Code]...

View 6 Replies View Related

Hardware :: Can't Configure Stable Xorg.conf For Triple Head

Aug 25, 2010

I currently have 2 GPUs in my system both ATI. The primary is a HD4870 and the secondary is a HD4350.

I have a 24" and a 17" running in twin view from the 4870 but I can't figure out a way to enable my third monitor to display anything at all, I have tried multiple configurations but I end up breaking the xorg every time.

All I simply want to do is keep my twinview on the monitors run by the 4870 but have the third monitor as a separate X session so I can still use compiz. Here is my xorg file, it was generated by aticonfig.

Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection

[Code].....

View 2 Replies View Related

Software :: Setting Up CUPS / Configure Cupsd.conf For Security?

Apr 21, 2010

Using Debian Lenny.I am new to printing with Linux and would like some help with CUPS. I have CUPS set up to work with my printer.I read through the documentation, but still have some problems.

1. How should I configure cupsd.conf for security?

Quote:

Portwalling

* By default, cups will listen on every interface. Unless you want to offer your printer to the world, you must block this.Although you can firewall this (and that is a good idea anyway),you can also not have cups listen on your Internet connection.This also prevents any possibility of a root exploit from the Internet. Of course, you still have internal crackers to worry about...

* In cups.conf, comment out the lines:
Port 80
Port 631
* Replace them with:
Listen 127.0.0.1:631
code....

How do I create a symbolic link between programs?When I opened Xpp it said Printer:destination not available.

4. Can I adjust the text size on text, pdf or html files with Cups or do I need another program for this?

View 3 Replies View Related

General :: Configure Sendmail (Serve Two Domains) For Slackware

Apr 19, 2010

I'm configuring sendmail that runs on Linux Slackware but find some difficulties to do some quick startup due to its complexity and massive documentation. Suppose I want to configure a sendmail that can serve 2 domains:
ethereal1m.no-ip.com
ethereal2m.no-ip.com

I use noip2 client software to connect with noip server that translates the dynamic IP addressed domains, setups POP, and does forwarding. By having 2 domains, I want to able to send email between admin@ethereal1m.no-ip.com and admin@ethereal2m.no.ip.com;therefore, my machine acts as both a server and a client. How can I setup sendmail so that it acts as both server and client? How to register email address and its domain on sendmail?

View 2 Replies View Related

General :: Trying To Configure Grub - Slackware Partition Setup?

Oct 24, 2009

Okay on /dev/sda
sda1 is windows xp
sda2 slackware /boot /system files
sda3 slackware swap
sda5 Centos LVM

Now my question is when I install CentOS grub did not automatically setup the slackware partition and I have to configure it manually. This is my grub.conf file

[root@centos ~]# cat /boot/grub/grub.conf
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,4)
# kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol01
# initrd /initrd-version.img
# boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,4)/grub/splash.xpm.gz
hiddenmenu
title CentOS (2.6.18-92.el5)
root (hd0,4)
kernel /vmlinuz-2.6.18-92.el5 ro root=/dev/VolGroup00/LogVol01 rhgb quiet
initrd /initrd-2.6.18-92.el5.img
title Slackware root (hd0,1)
kernel /vmlinuz-generic-2.6.29.6
title Other
rootnoverify (hd0,0)
chainloader +1

How should I do the slackware in grub?

View 13 Replies View Related

Ubuntu Networking :: Every Time Restart Have To Configure Internet Using PPPOE CONF

Jul 25, 2010

i configured my laptop (running UBUNTU 10.04 LTS) for my broadband (bridge mode). I did that using PPPOE CONF command. Everything goes ok but only prob is i have to run this command and configure my net every time i restart my system. What i need is it should connect to the net whenever i use the PON DSL-PROVIDER and must turn off by using POFF..

View 1 Replies View Related

Debian Multimedia :: X -configure Segfaults - Sid - Cannot Create Xorg.conf To Get A Correct Resolution

May 13, 2010

I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.

View 6 Replies View Related

Ubuntu Servers :: Internet Printer - Configure In The Cupsd.conf File To Put It Online?

Oct 20, 2010

I need to get my printer assigned to a hostname "myhost.dyndns.org". What do I need to configure in the cupsd.conf file to put it online?

View 1 Replies View Related

Red Hat :: Snmpd Log Error Parsing, Skipping?

Jul 21, 2009

I would like to know if what this log error mean and how i can resolve this matter. I would like to verify if this is a misconfiguration or a bug on my settings

the log error is:

snmpd:error parsing ', skipping

the RHEL version used was 4 update 4 64 bit

the snmp packages installed were:

net-snmp-5.2.1-0.2
net snmp-lib - 5.1.2-11
net-snmp-lib - 5.2.1-0.2

View 1 Replies View Related

Slackware :: No More Xorg.conf?

Jun 2, 2010

Sorry if this was well covered here when most up-to-date Slackers moved to 13.0, but I have just jumped from 12.1 to 13.1. Generally very happy that I do not have to think about xorg.conf as I always found the structure of this conf file a tad confusing. However if I do need to (for example) change my video driver (I might for example want to try the nvidia driver from NVIDIA) or configure my touchpad - how do I do this ?

I understand that xorg.conf can still be created. If I do so, do I have to put all the stuff in that used to be there or can I just add the stuff I need to make the changes I am looking for?

View 4 Replies View Related

Slackware :: Wine 32 Bit On Slackware 13 64 Bit - Configure Can't Find Some Libraries

Oct 19, 2009

Now i have 64 bit computer i installed Slackware 23 64 bit on it. i followed Alien Bob's multi lib how to and installed needed libraries one by one. everything is fine expect wine configure script can not find some libraries needed: libgsm, libmpg123, libopenal, libxcomposite.

I have already installed 32 bit compatibility packages and used /etc/profile.d/32bit.sh as recommended in Alien Bob's howto. configure -- does not really list anything for pointing for libraries.

View 14 Replies View Related

Security :: SELinux Module To Allow Snmpd To Write To /tmp?

Aug 11, 2010

I am using the "extend" function of snmpd to run a script in order to extend a monitoring platform. This script being ran by snmpd needs to write to a file in /tmp for later parsing, but SELinux is stopping it from writing to the file under /tmp. The following two lines from my audit.log file show what is happening:

Code:
type=AVC msg=audit(1281516573.123:18422): avc: denied { write } for pid=6933 comm="test2.sh" name="tmp" dev=dm-0 ino=1474561 scontext=root:system_r:snmpd_t:s0 tcontext=system_u:object_r:tmp_t:s0 tclass=dir

[Code]..

View 8 Replies View Related

Server :: Where Are MIB Files For OIDs Reported Through Snmpd?

Mar 22, 2011

I want to find the mib files where the OIDs used in snmpd are. Where can I find those mib files?

View 1 Replies View Related

Slackware :: Can't Add Ubuntu Into Lilo.conf

Jan 10, 2011

I finally installed Slackware and now I have Windows, Slackware and Ubuntu in my laptop. I installed Ubuntu at the last order and at that time GRUB the default loader. But I feel that I'd like to use lilo more, so I booted into Slackware and run "lilo" and then lilo became the default loader.But then I cannot access Ubuntu anymore. Because in lilo there're no information about Ubuntu. So I added some information about Ubuntu according to that of Windows in lilo. But that failed. I still cannot access Ubuntu. I searched for the posts about this problem, and this is what they say:

Quote:

image=/ub/vmlinuz
label=ubuntu
read-only
root=/dev/sda7
initrd=/ub/initrd.img-2.6.28-13-generic

or something like this. But in my slack I cannot find the image or the initrd.

View 1 Replies View Related

Slackware :: Compat32pkg - .conf.new Warnings ?

Feb 28, 2011

I am just now doing the 'final' few tweeks on my new x86_64 Laptop running multilib-enabled Slackware Current and as part of the process, I installed compat32pkg and ran:

Code:

Next, to test compat32pkg, I ran:

Code:

The compat32pkg script seemed to do the 'right thing', placing the three Slackware Packages in the /var/cache/compat32pkg/compat-32/ directory as it was configured to do:

Code:

Note the warnings about 'etc/gtk-2.0/i486-slackware-linux/im-multipress.conf.new' ...

Is there a missing file in the SlackPkg ?

Code:

View 2 Replies View Related

Slackware :: No Xorg.conf.d Directory In 13.1?

Feb 20, 2011

I just did a clean install of 13.1 on one of my laptops and the scroll doesn't work on the synaptics touchpad. I've seen some comments about adding a file to the /etc/X11/xorg.conf.d/ directory. I don't have this directory. Is it ok to add this, or did I screw something up during the install. I did another 13.1 install about a week ago and it is also missing this directory. Is this just something in current and not in 13.1?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved