What I am tring to do is give all users of group users rwe any files/directories of a samba share execpt for the top level.Top Level cotains a number of folders and a readme file and should be r-eSublevel should be rwe including files/dir they did not create.I'm am familure with chmod/chgrp but not sure how to do this.
View 1 RepliesI am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.
View 2 Replies View RelatedI have a query to ask. I want to configure a samba share. Following is the configuration of the machine.
[root@SGKPC ~]# fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 19452 156143767+ 8e Linux LVM
[Code]...
I want to restrict my Samba Share to 50 GB.
how to configure samba share that users from ip pool (for example 192.168.1.200-210) have accest without login and rest users form ip pool (192.168.1.2-199 and 192.168.1.211-254) have to past autorization.
View 1 Replies View RelatedI would like to configure an access to folder
/fileserver
for two services : Samba and VSFTPD
How to do it ? How to create folder rights that samba and ftp user will have an access (read/write/delete) to all directories in /fileserver.
My system is CentOS. I`m starting samba and vsftpd like a root (/etc/init.d/vsftpd start etc.)
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....
This probably something simple but it's got me foxed. I have a desktop and a laptop both running 10.04 great no issues, I have my music and movies on the desktop and stream wirelessly to my laptop.All worked great until I started to run out of space on the base units hard drive, no problem I added a second 500gig sata drive internally and moved the music and movie folders across.Now although I have marked them as shares I access them remotely, the second drive has to be mounted and appears almost like a external drive.
View 1 Replies View RelatedI am using samba from a windows client to put some rights access on FTP server on Linux. created a folder and I want that a user can write in that folder (put a file for example), but, once he did that, he can't delete or rename the file.
View 5 Replies View RelatedI have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I have karmic on my laptop, and I can't access my windows network. I have had previous versions of ubuntu and managed to configure samba. However, since my last reinstall, I can't get it to work.
View 7 Replies View RelatedCan I share an NFS mount with samba?
Scenario:
ServerA has an NFS Mount to ServerB at mount point /home/qlogger/logs
I can cd to /home/qlogger/logs on ServerA and see the contents as they would be on ServerB (NFS Working with proper permissions rw).
I have a samba share setup on ServerA to share the NFS Mounted Directory (/home/qlogger/logs)
I connect with my windows host and am able to view the files and folders. I can create folders just fine however; when I go to copy a file from the windows machine to the samba share I receive a message saying the file is locked.
I have disabled oplocks in samba and the problem still persists.
Q: How do I mount a CIFS share so that my user stevej has all rights to it?
Summary: I can mount the share as root.
mount.cifs //10.x.x.x/Data /home/stevej/Synology/Data/ --verbose -o user=stevej
Using Dolphin in Super-User mode, I can copy files and directories from the share to itself with no errors. Using Dolphin in Normal-user mode. I get the failure "Could not change permissions for...". The file is copied, but its owner,timestamp and permissions are wrong. If a subdirectory is involved, the copy aborts.
Using Windows XP I can copy files and directories from the share to itself with no errors.
Testing: If I mount with uid and gid, then my normal user can not access the share.
mount.cifs //10.x.x.x/Data /home/stevej/Synology/Data/ --verbose -o user=stevej uid=stevej gid=users
[code]...
Synology DS211 - There are 2 users on it. One of which is stevej and the other is julie. Rights RWX are applied to the users and the group called users. All files have stevej as the owner and users as the group with RWX Opensuse 11.4 - There are 2 pc's. One is run as stevej. The other pc runs as julie Windows 2000 - Runs as stevej and maps to the share as stevej.
Works as expected Windows XP - Runs as julie and maps the the share as julie. Works as expected Ultimately, I want the shares to automount at boot, or login and give the user full access. I have been to Swerdna's page and done as much as I can, but still no luck.
Lately I'm getting this question a lot.For every project I want to create a tree like this:
Code:
- project
- drawing
[code]...
I am novice user of linux. I need to know how to configure firewall so my system cant be compromised...In windows my system was greatly compromised. keyloggers were installed without my approval and my desktop was taken on remote. What should I do so without my knowledge no software can be installed and i can close all ports and only open which ever port is required to open. What should i do so my desktop cant be taken on remote?How do I configure user rights ? So except me no one can install any software. I will have another general user id for internet surfing
View 3 Replies View RelatedI am running Jaunty 9.0.4. I used system-config-samba (gui) to configure Samba. I put myself as a user and tried to map the drive from my local PC. I am unable to map the drive. On windows, I try to connect using a different user and when I select finish, it prompts me again and adds my workgroup before my user name.
View 8 Replies View RelatedWhen I create a new folder on my ubuntu machine and share it with my windows 7 machine using 'net usershare add <dir> <path>', I can't get write perms in Win 7. It keeps giving me a "You need permission to perform this action'. I've chmod the folder to 777 but still no luck.
The funny thing is, it was all working fine until I tried to add a new usershare yesterday (Can't think what I've changed). I use this sharing method to share all of my development /var/www/ folders so I can work on them from my win machine.
I have had a few problems with my samba smb.conf, and it nuked and rebuilt yesterday. I'm fairly new to the Linux game, and this permissions problem has me baffled.
I have mounted a samba share on my desktop from a remote server (with smb4k). There I created a symlink to "/". When I open the symlink with konqueror it opens the right one (the root directory of the server), but when i open this link with the shell (cd rootfs/), then it opens my local root directory (of my host)... Is it possible to open the right link with the shell?
View 1 Replies View RelatedUbuntu 10.04 with Windows OS as Virtualbox, using Samba I connected to another computer which shows up mounted as:
Code:
smb://scott/premier9/
Now in Virtualbox Shared folders it doesn't show up so I can't share it?
Screen shots below...
How can I See it in Virtualbox?
My desktop is now dual boot, Xubuntu 10.10 has been added to WinXP. The attached parallel printer works fine with either OS. When running XP I can share the printer with my two XP laptops without problem. I cannot share it when the desktop is running Xubuntu. Neither laptop can see the printer. However, if I open the desktop Samba config application, change any parameter, retype in the original parameter, both laptops can see and connect to the shared printer - until I reboot the desktop
View 9 Replies View RelatedI've installed ubuntu 10.10 and shared with samba a folder of the disk with no problem I tryed to share 2 different usb disk and I got problems!
With windows I can see the shares, but not browse and all the setting in smb.conf are the same for the folder in the hard drive and the USB disk
I have a samba-share that mounts on my desktop. But how do I find it from applications?
When I browse from application is not visible in the desktop folder.
PS. I find it with smb://pathway, but I don't know how I can do it from some gui-applications.
I have two Ubuntu 10.10 computers and two Windows XP computers connected to my network. I cannot share files between the Ubuntu computers using samba. I keep getting the "Unable to Mount Location Failed to mount Windows share" error. I've tried the solutions posted by dmizer here and nothing works.Random true facts:I can successfully connect to folders shared on my Windows XP computers from either windows computer.I can successfully connect to folders shared on my Windows XP computers from either ubuntu computers.Neither of my windows computers cannot connect to folders shared on either ubuntu computer.Neither ubuntu computer can connect to folders shared by the other ubuntu computer.I REALLY need to get samba to work since I have other Windows computers on my network.
View 8 Replies View RelatedI have a security camera (Mobotix M12) which can save video to a Samba share, but it's unable to mount the share. So from another system I am trying to mount that share and it's failing.
The problem is not firewall, as no problem messages, and the Samba log is vacant.
When using this command, and I give the password:
In dmesg on the client I get:
And on the server I get nothing in dmesg or samba logs. And no logfile is created for the client machine in /var/log/samba. I can ssh over to driveway on the server just fine.
I used to use Samba, although it's been a long time, since I discovered sshfs.
I am trying to mount a file server directory on a client machine. I tried using NFS, but could not mount the share on the client. Several respobses were given to a post on this problem. but I still was not able mount the NFS share. I decided to try instead to mount the directory as a Samba share because I can already access it using Samba from windows, or from KDE or Gnome using smb://fileserver as a desktop location icon URL. When I try to mount the Samba share I get error messages that nearly identical those that occurred with NFS. . Here are some of the setup parameters
CentOS 5.4 on client and server behind a D-Link router
server IP: 192.168.0.44 (can ping it client)
client IP: 192.168.0.101 (can ping from server)
[code]....
This is the only error message that these commands have produced in the messages log, secure log or smbd log for either machine. My immediate goal is to set up the simplest possible local mount that will allow Grsync to backup to the file server.
I am really bothered from this I cant configure the 2 nics to share the internet and I already changed the sysctl.conf file to
# Controls IP packet forwarding
net.ipv4.ip_forward = 1
I have one nic reeving the internet and working good and the other one cant see anything...
I am novice user of linux. I need to know how to configure firewall so my system cant be compromised...In windows my system was greatly compromised. keyloggers were installed without my approval and my desktop was taken on remote.What should I do so without my knowledge no software can be installed and i can close all ports and only open which ever port is required to open. What should i do so my desktop cant be taken on remote?How do I configure user rights? So only root and one admin can install softwares and no one else.
View 5 Replies View RelatedIn this post I will give a quick solution for a possible problem with sharing a folder in Fedora 15.I had to spend some time for research and frustration so, hopefully this post will save you from both. If you have Samba installed and configured to share certain folders on your Fedora machine for a Windows network but, they can't be accessed then following might solve the problem:
1. Go to Applications, Other and run FIREWALL
a). go to TRUSTED SERVICES and check SAMBA and SAMBA CLIENT that are located in the list of services
b). click APPLY
c). go to ICMP FILTER and check ECHO REPLY (PONG) and ECHO REQUEST (PING)
c). click APPLY
[Code]...
If your Samba is configured correctly, your shared folder should be available on your Windows network.A little hint: if you don't want other users to use passwords for accessing your shared folder, select SHARE as an Authentication Mode in Samba GUI Configuration Tool, Preferences, Server Settings, Security
so i found an older computer i want to play with as a file server. ubuntu server edition, installed gnome GUI (to make things easier for now, i plan on removing it later) and used [URL].. to configure my 1.5tb harddrive so my windows machines can access it. i had everything working but than a fatal crash made me start from scratch (os and all) now i am unable to access the samba share from a machine running windows 7, but i can access it from a machine running windows XP using the same login and password i set up for windows 7.this makes me believe it's a problem with windows 7 and not samba.
View 8 Replies View RelatedI'm able to connect to a networked Windows machine and its shares using the Places -> Network -> Windows network interface, but unable to do so using smbclient at terminal command line. I can see the shares using:
smbclient -L //server -U username
But when issuing the command:
smbclient //server/service -U username
I get:
domain=[server] OS=[Windows Server 2003 R2 3790 Service Pack 2] Server=[Windows Server 2003 R2 5.2]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME
The share name has spaces, like
lab raid root share
I use 40 to fill in the spaces. This problem must be something fairly simple if I can connect via the Places GUI but not through the command line.
I have this samba share for ghosting images to (backing up computers at work) and I can read the ghost images just fine from the share, but I am unable to write to the share. From any windows environment I have tried, I get a disk is full error. I have 200GB+ free space, so this is not the actual issue. I believe there is a write permission somewhere that I am overlooking. My setup basically lets me log in under the username samba from a client machine.
Here is my smb.conf file:
Code:
#======================= Global Settings =======================
[global]
workgroup = discount.local
server string = %h server (Samba, Ubuntu)
[code]....
I've tried chown on /media/Images to make it owned by samba, but it just reverts once I remount the partition. Either that or my eyes are playing tricks on me.