I am using Squid server on my Red Hat Linux machine.Squid is functional and clients are access through proxy.I want to ask that if I want to open my squid.conf file for any changes should i first stop squid and then do the changes .
View 3 RepliesI am using Fedora 9, I have compile the squid with source code, i also deleted the old RPM of squid. i then edited the squid.conf in /usr/local/squid/etc and set http_port 3128 transparent and allowed in my acl to my local network but the transparent proxy is not working. if i remove transparent proxy then squid works fine. when i try to make it transparent the squid access.log file does not show any request coming to it (no activity). i have also forwarded all the incoming traffic to squid port 3128. Can anybody tell me why my transparent proxy is not functional.
View 3 Replies View RelatedI am going to configure squid in my linux box.I have different kinds of ranges in my office.The default is as under
Code:
acl our_networks src 192.168.1.0/24 192.168.2.0/24
http_access allow our_networks
can I add my own ranges as
Code:
acl our_networks src 10.1.60.0/24 10.1.70.0/24 10.0.80.0/24 10.1.90.0/24 10.1.100.0./24
http_access allow our_networks we have divided according to floors ,like 1st floor ip range is 10.1.60.0 2nd floor 10.1.70.0 ,third 10.1.80.0 and so on. All IP ping each others successfully.
I have encountered a problem using squid, I am currently configuring my squid to deny all http and https except 1 external dst ip address which I will use to connect trough RDP, how can I configure my squid with what I want to accomplish?
View 1 Replies View RelatedI have Squid Version 3.0 PRE5 installed on debian etch.Howto exclude some URL from the proxy caching at squid.conf ?
View 5 Replies View RelatedI want full commands from creating of folders for the log dir & giving permissions to the directories to the script of /etc/rc.d/init.d/squid
View 2 Replies View Relatedhow-to configure squid proxy server. I still haven't been able to find a solution. I want to set up squid as a open http proxy server. So people from other networks can connect through the proxy without having to login.Do I have to use iptables to reroute http traffic to squids proxy port? I have forwarded the port in my ISP modem so I know thats working, its the squid config that has flaws or iptables locally.
View 1 Replies View RelatedI am trying to use SWAT to better configure Samba.conf I have swat installed and working but it is missing the GLOBAL button which is its main configuration tool?
View 3 Replies View Relatedi have just install Sarg-2.2.3.1.tar.gz but When finished compiled i cannot see sarg.conf (in directory /etc/.. or /etc/httpd/conf.d). May i know where is it.?? I'm not sure compiler which it's work good or not good. Some logs show in here:
Quote:
[root@proxy sarg-2.2.3.1]# make install
cp sarg /usr/bin/sarg
chmod 755 /usr/bin/sarg
cp sarg.1 /usr/local/man/man1/sarg.1
chmod 755 /usr/local/man/man1/sarg.1
[Code]...
i configured my laptop (running UBUNTU 10.04 LTS) for my broadband (bridge mode). I did that using PPPOE CONF command. Everything goes ok but only prob is i have to run this command and configure my net every time i restart my system. What i need is it should connect to the net whenever i use the PON DSL-PROVIDER and must turn off by using POFF..
View 1 Replies View RelatedI have running on RHL enterprise 4. I want to configure squid users to authenticate against windows 2003 active directory. How do I go about from scratch
View 1 Replies View RelatedI am using Red Hat Linux and i want to to configure SQUID server on it. The server has two Lan cards.WAN eth0 192.168.1.200LAN eth1 192.168.1.210 I have a static IP from my ISP. In my private network i have 40 computers running windows xp and fedora ,ubuntu as a destop pc's from range of 192.168.1.10 to 192.168.1.40 In my server computer I can brows internet because it is directly connected with the ISP.For configuring squid should I first make this computer as a gatewat by packet forwarding i.e # echo 1 > /proc/sys/net/ipv4/ip_forwardand then configure for squid server
View 1 Replies View RelatedI want to configure squid server with SSL so that users send clear text username/password and also data in encrypted mode. i googled but all of the configuration is for reverse proxy not requests from users to proxy server in LAN for example.
View 5 Replies View RelatedHow to configure SARG to monitor SQUID?
View 1 Replies View RelatedI m kapil sharma i want to know how i configure iptable and squid service in redhat 5.0?o access internet in network.
View 3 Replies View RelatedHow to configure squid with active directory
View 1 Replies View RelatedI need information to configure squid proxy server in centos 5.3 i need that urgent.
View 1 Replies View RelatedI m trying to find an answer for this matter. I have download the SNMP version which I am concerned due to the following problems. I am trying to configure the SNMPD.conf and I cannod find any tutorial on the internet.
I downloaded the following product.
Linux version :
Linux version 2.6.18 (root@srv03) (gcc version 3.3.6) #1 SMP Sat Sep 23 19:32:53 BRT 2006
SNMP
net-snmp-5.4.2.1-i486-1_slack12.0.tgz
when I run the command snmpd I have the following problems
root@srv03:~# snmpd
snmpd: /lib/libc.so.6: version `GLIBC_2.4' not found (required by snmpd)
I dont know how to configure the SNMPD.conf there is anyway
I am using Squid Proxy Server alongwith Dansguardian, dhcp3 and ClamAV on my local network. Everything is working fine except for .flv files like [URL]. The problem is that Squid wants to download the whole .flv file first to its cache and then serve it to the client.
It has an advantage that the whole video loads at once on the client's browser but that is not what our users want.
What they want is that these files load on the fly as they do on a normal internet connection. How do I configure squid to serve .flv files on the fly to the client PCs?
i want to configure my squid sever in ubuntu with webmin.first my machine spec i have xeon with two prosesors 3gb RAM 3 scsi hard drives each 72gb .two ether net card ,one is attached with adsl modem and the second is conected with MY LAN . now what i want is to configure my server to acess only those user whos ip bind with mac. and act transparent proxy sever with user bandwidth control.thats it
View 1 Replies View Relatedhow do i configure squid proxy server in centos 5.5 final text mode only to block facebook from 9am to 4pm
View 3 Replies View RelatedI am recently install Linux CentOS 5.3 and configure squid proxy server but when i start squid following messege are display:
Why squid display messege:
I have configured squid with AD. It is working fine. Now I want to use dansguardian with squid for web filtering on group bases, what should I do. What configuration i have to do in squid for dansguardian and all my users in AD also authenticate with dansguardian and also how I use dansguardian.
View 1 Replies View Relatedhow to configure transparent proxy in squid-3.0-staple16? I install it with source code
View 1 Replies View RelatedI want to install squid proxy and iptables in ubuntu 10.10 and ip tables.
View 5 Replies View Relatedcan anyone give me the solution how to configure dansguardian on squid transparent proxy.i m using
linux - slackware
squid - squid-2.6-stable18
dansguardian - 2.10.1.1
squid transparent proxy is working properly.
Anyone experience with multiseat configuration in combination with openSUSE 11.2. Looking for a howto since we don't use xorg.conf to configure X and everything is autodetected by HAL.
View 1 Replies View RelatedI have a wacom graphire3 tablet and two monitors. The tablet is workin properly with out of the box drivers.
As well as the dual monitors configured as twinview through Nvidia X server. But the tablet is mapped for the two screens, then I searched the forums for a proper configuration and it it tells me to edit the xorg.conf file for twinview horizontal but, it don't make any difference. I've "sudo gedit" edited the xorg.conf and nothing happens. Nothing, the tablet is working properly, the system is stable and it's still mapped for two screens.
What can I do? The xorg.conf also isn't listing all my hardware, I can't see the confs for my mouse. I'm on karmic koala.
All I need to do is get my screen resolution to 1024x768, I can currently only get 800x600 and that's unacceptable for school. I created an xorg.conf file in Lucid and it does in fact refer to and use it. what led me to believe that is when I looked in the mirror and noticed smoke slowly rolling out of my ears! After replacing some of that smoke with a cigarette I decided to make this thread. As I said, I created the xorg.conf.new file with:
Code:
sudo Xorg -configure from recovery mode. And then moved it to its proper place with:
Code:
cp /home/william/xorg.conf.new /etc/X11/xorg.conf
And that nested it right where it needs to be. X does in fact use it as confirmed by my Xorg.0.log.
Now I have an xorg.conf file, but am quickly becoming overwhelmed with information as to what to do. I've tried to create mode lines with xrandr, which gave me new settings, but I was unable to use them. Obviously the EDID info. is not being read because there is no mention of clock speed, Vsync or Hsync in my Xorg.0.log either. I have tried many things and really don't have time to spend all day at my computer, at least not with this issue. I'm in school and have to focus primarily on that right now. I will give what info I know is relevant starting with my monitor specs:
Dynex DX-LCDTV19
vertical resolution: 720 p
aspect ratio: 16:10
screen refresh rate: 60hz
comb filter: 3D/YC digital
[Code].....
what's the difference between the following 2 methods for specifying in httpd.conf to use PHP to parse files with extension .php?
Method 1
AddType application/x-httpd-php .php
Method 2
LoadModule php5_module modules/libphp5.so
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>