Ubuntu Networking :: Setup An Ad-hoc Running 10.10?
Jun 6, 2011How do I set up an ad-hoc network? Running Ubuntu 10.10.
View 1 Replies
ADVERTISEMENT
Networking :: Setup Laptop Running Ubuntu 10.04 Into Router?
Jun 18, 2010\How can i setup my computer (currently running Ubuntu 10.04 lts) into a router so that other laptop can have a wireless connection to it and be able to access the Internet?
View 4 Replies View RelatedUbuntu Networking :: Setup A Network Of 21 Computers Running Edubuntu 10.10?
Feb 7, 2011I have recently set up a network of 21 computers running Edubuntu 10.10 I use iTalc to communicate with the pcs and also to shutdown all of them at once. The only problem I have, is it doesn't start up again with iTalc. So I switched to ClusterSSH. Only problem I have now is that everytime I run cssh, I need to manually add IP addresses of all the pc's, before I can start issuing commands. Is there a config file or something I can populate with all the IP addresses so that it starts up with all of them already added? And while we are at it, the command to start up a computer on the network?
View 2 Replies View RelatedFedora Networking :: Setup A LAN With An FC14 Laptop - FC15 PC And A Windows Machine Running XP?
Jun 27, 2011Trying to set up a LAN with an FC14 laptop, FC15 PC and a Windows machine running XP. I have SAMBA installed on both FC machines, but neither of them can see shares on each other or the XP machine. I can ping between all of them. The Windows machine sees all of the SAMBA shares.
When I attempt to Connect to Server under Places on the FC15 PC, I do not have a Windows share option to choose from as I do on the laptop, suggesting smbclient isn't configured correctly on that machine. SMB, NMB and WINBIND are installed and activated on startup on both FC machines. Although I have the Windows share option on the FC14 laptop, it will only connect with the IP address.
Firewalls and SELinux on both machines are disabled. Here are some configuration details:
rpm -qa | grep samba
samba-3.5.8-68.fc15.1.x86_64
samba-winbind-3.5.8-68.fc15.1.x86_64
samba-swat-3.5.8-68.fc15.1.x86_64
system-config-samba-docs-1.0.9-2.fc15.noarch
samba-winbind-clients-3.5.8-68.fc15.1.x86_64
[Code]...
Ubuntu Networking :: Setup A OpenVpn On 10.04 - Error "Stopping Virtual Private Network Daemon - No VPN Is Running"
Mar 15, 2011I'm trying to setup a OpenVpn on my Ubuntu 10.04 and after doing the configs from here: [URL] I get an error:
[Code]....
Ubuntu Servers :: Setup A SMF Forum Running Hardy?
Jun 24, 2010I'm trying to setup an SMF forum on a server running Ubuntu Hardy. The problem is that the website on the server was built using Django. So considering that Django uses Python and SMF uses PHP, would it be possible for both of these to coexist on the same server? If so, how? If this can't be done, I'm more than willing to rebuild the website in PHP. If I were to do this, then what do I need to do to reconfigure Apache? As of right now it's using mod_wsgi, but I'm assuming I would need mod_php. How would I set this up?
View 9 Replies View RelatedUbuntu Installation :: WiFi Setup On Pandaboard Running 11.04
Jul 30, 2011I'm running Ubuntu 11.04 (kernel version 2.6.38) on my Pandaboard. When I run iwconfig, wlan0 shows up but the wireless is disabled. I am not able to start it up. I have not installed any patches or anything. Either upgrade kernel to 2.6.39+ or patch the existing drivers.
View 2 Replies View RelatedOpenSUSE Network :: 11.2 Xen Bridged Networking - Setup Multiple DomU Through The Default Bridge Setup
Feb 4, 2010Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
Ubuntu Multimedia :: Running A Multi Monitor Setup With Xinerama?
Jan 18, 2011I am running a multi monitor setup with xinerama, and everything works great except when I try to play an FPS such as OpenArena. The mouse doesn't work, it gets stuck to the screen edge.
View 6 Replies View RelatedUbuntu Networking :: Cannot See Network Icon - Nm-applet Running - Notification Area Running
Dec 25, 2010Hi. I have Ubuntu 10.04, nm-applet is running in the background, my battery icon and sound icon are showing but my network icon has been missing for the past 2 days. It was working fine before but now it's not. How can I fix this issue if I don't have an ethernet cord? Is there a way to roll back the recent updates or do I need to reinstall my network manager?
I've tried restarting the system and I've tried killing nm-applet and reloading it using Alt F2. I get some Debug error.
When I try to run nm-applet --sm-disable
It says an instance is already running and then gives me a warning.
I tried removing "iface eth0 inet dhcp" from /etc/network/interfaces and then tried restarting by "sudo /etc/initi.d/networking restart"
It says:
What can I do to connect to the internet? I have a flash stick if its possible to download a .deb package on this mac and transfer it over to my other laptop to fix the problem. If its possible.
Debian :: Running Apt-setup But The Command Isn't Recognised?
Jul 12, 2011apt-get install startxwould sort this out but no joy. I don't seem to actually be able to get anything using apt-getI've tried running apt-setup but the command isn't recognised.I'm sure I'm connected up to the internet (I'm using a wired connection I run dhclient eth0 and check with ifconfig and eth0 seems all happy and connected up). I'm also trying to install mpg321 or mpg123 as it would be nice to have some tunes but I get the same "package not found" error message
View 14 Replies View RelatedGeneral :: Setup Ubuntu To Boot In Terminal Mode With All Service Running
May 5, 2010Im running a virtual linux server on a low-end system, and i wold like to configure the server to boot in terminal window and not to the Gnome log in window, this is because of the low specs on the hardware.
View 5 Replies View RelatedUbuntu Servers :: Download Directory Setup - Running Video On Browser
May 31, 2010I setup a download directory on my server, and put a test video in it. I tried to run the video in my browser and it only runs part of the video then stops. If I download it and run it on my desktop with mplayer it run the full video. I am not sure why? Here is a link to the video. [URL]. Before I setup more videos I wanted to see if there is an answer to this problem.
View 5 Replies View RelatedFedora X86/64bit :: Wine-1.1.29 And X86_64 Running Any Setup.exe?
Oct 2, 2009Just installed wine from repository.Trying to install a windows application, but getting the following:
$ wine "f:Setup.exe"
Trying to load PE image for unsupported architecture (I386)
Trying to load PE image for unsupported architecture (I386)
[code]...
Red Hat / Fedora :: RAID0 Setup - Running Out Of Storage Space
Feb 3, 2011I have a Fedora NAS (not built by me) there is a 1 Tera of storage 2x 500 set at raid 0. The server runs Fedora 7/8 I believe which, runs flawlessly. Sadly, I am running out of storage space and would like to add more. Can I just put another drive in the box? If so, what do I need to do and what impact does it have on the existing raid 0 setup. Ideally I would like to put two additional in but I am not confident how to configure them. Is this just a case of mapping them in Windows 7.
View 2 Replies View RelatedSlackware :: Setup Software RAID1 On A Running System?
May 23, 2011I have a nas / server running Slackware64-13.37 with two raid arrays, one with 3x500GB disks and the other with 2x2TB disks. I also have 1x80GB hdd which contains the os. I found a spare 250GB hdd from my closet and want to set up raid1 array from os hdd and that spare drive.I know that I can't make use of the extra 170GB of space but I don't care as long as I have working installation on the other disk if that 80GB hdd breaks. How can I set up that kind of raid1 without losing any data?
View 1 Replies View RelatedUbuntu Servers :: Setup SOCKS5 Proxy - Cannot Find A Way To Get A SOCKS Server Up And Running On VPS
Mar 30, 2010I have an interesting situation. I'd like to use bittorrent for legitimate purposes (mainly linux distro based) but the powers that be have blocked access to bittorrent at my university. I have an ubuntu VPS that I use for odds and ends and was thinking that I could setup a SOCKS5 server on it. That way, I can input the SOCKS5 info directly into the proxy section of my local bittorrent application (Transmission 1.92 running on snow leopard) and be good to go. The problem, however, is that I cannot find a way to get a SOCKS server up and running on my VPS. I've heard that ssh can be used as a simple SOCKS server, but I've also heard that i may need to install a more complete SOCKS server such as dante. Does anyone have any thoughts on this?
View 1 Replies View RelatedGeneral :: Dual Boot Setup - Running Windows As Virtual Box
Jun 21, 2010I currently run a Windows 7 Compaq laptop with an Athlon x2 and 4gig of DDR2. I want to either set up a dual-boot on my laptop, or make Linux the Primary with Windows running in something like a virtual box. I am very much into Android and I want to learn Linux as a result of that. So which Distro should be considered in a situation like this.
View 6 Replies View RelatedOpenSUSE :: Setup A Custom Home Server Running 11.3 64-bit In Terminal Mode?
Feb 5, 2011I've recently setup a custom home server running openSUSE 11.3 64-bit in terminal mode. I've since successfully setup and configured it to act as an iSCSI target using the iscsitarget package and the corresponding kernel module, along with the YaST module for the configuration. Prior to setting up my hard drive accordingly, however, I noticed that when I ran 'zypper up' in a terminal I got the following:
Code:
pph-server:~ # zypper up
Loading repository data...
Reading installed packages...
[Code]....
At the time I accepted, and found later that it removed the setup I had, meaning I had to start over. However when I ran YaST in a terminal it then wanted to re-install the iscsitarget package, which subsequently removed the tgt package, and so this continued for a bit. (Thankfully no actual data was stored on the target at this stage .) For the time being I've locked the iscsitarget package and the kernel module to prevent zypper from wanting to remove it and install tgt instead since I now have my target working as I want.
The question I have is why zypper was trying to remove iscsitarget and install tgt, and yet the corresponding YaST module was wanting to do the opposite. Is tgt considered a better option by the openSUSE developers, in some way, for setting up an iSCSI target? Is iscsitarget development/availability being ceased by them in favour of tgt? Is there something else I'm missing? Neither of these packages seems old to me: the latest version of iscsitarget was released on SourceForge last July, while tgt was only updated this month.
Debian :: Setup Vnc Server And Keep It Running In The Background After Restart On Lenny Workstation?
Sep 23, 2010How to setup vncserver and keep it running in the background after restart on Lenny workstation? The admin should be able to connect every time via vncviewer to this workstation.
View 2 Replies View RelatedUbuntu Networking :: Remote Access A PC (running Winxp) From Laptop (running Ubuntu 10.10) Over Internet
Jan 12, 2011I need to remote access a PC(running winxp) from my laptop(running ubuntu 10.10) over internet.
View 1 Replies View RelatedUbuntu Installation :: Setup A Dual Boot System With XP Running Side By Side On Thinkpad T41?
Jan 28, 2010have been trying to setup a dual boot system with ubuntu and XP running side by side on my Thinkpad T41.tried it a few times and always causes the same problem. i have 40 gig HDD, on which i create a 13 gig NTFS partition and leave the rest as free space. then install XP on the NTFS partition. no problems.
then i boot from the ubuntu disk (9.10 Karmic) and install using the "use free space" option at the partition section. ubuntu installs ok, and boots fine from GRUB 2.0. BUT when i select the XP option from GRUB's list, it starts to boot XP, i get the standard XP loading screen for three seconds and then it crashes to a blue screen critical problem, and restarts the system. when i then boot from the xp cd and go into recovery mode CHKDSK will not recognise the disk, and DISKPART shows one HDD at 35 gig which it cannot access.
this means i cant run FIXBOOT and get my xp install running again. every time i do this process it produces the same problem. tried at first with xp installed on whole HDD, and reducing the xp partition size. killed XP. then tried ubuntu first and xp second - but this caused the same inaccessible disk problem - xp would not recognise the partitions and would not install. so i slipstreamed my XP install disk to SP2 hoping this would make it recognise the partitions, but no luck there. so had to format all and repartition the 13 gig NTFS for xp. installed xp again without difficulty but ubuntu install killed my xp in the same way.
General :: Setup A Machine Running Drupal CMS On A Debian Machine?
Aug 13, 2010I'm know very little about Linux but decided to set up a machine running Drupal CMS on a Debian machine and it won't go. The folks at Drupal have tried to help but it seems the Debian OS won't do it's PHP thing for Drupal.
That means i'll have to start at the START I guess.
how to become a master of Linux if one is starting from ABC (I can add and subtract, that's what it feels like)
Networking :: Feasible / Desirable To Setup A Network Of Virtual Machines To Use As An Environment To Learn Networking?
Nov 18, 2010I've been learning linux for a while now with half an eye on making a career out of it in future. One sizeable gap in my knowledge at the moment is networking. Is it feasible/desirable to set up a network of virtual machines to use as an environment to learn networking? My budget is non-existent so I was hoping to be able to get a basic understanding of the principles from installing a few desktops, a virtual gateway etc on VMware workstation on my laptop, and doing a lot of reading online.
Is this feasible, or will I just end up learning about virtual networks instead of real ones? Also how much power would be required, because my 3GB RAM lappy has just gone bang and all I have now is a (new) 1GB RAM lappy.
Ubuntu Networking :: Setup LDAP On 10.04?
Jul 20, 2010I am trying to set up LDAP on 10.04 and cannot figure out what my FQDN is. Where do I find it or how do I configure it?
View 1 Replies View RelatedUbuntu Networking :: Best Wireless Setup For 10.04
Aug 2, 2010I recently bought the D-Link DIR-655 and DWA-140 wireless setup just before converting completely to Linux from windows. I'm sure there are issues with the ralink rt2870 chipset. I did get this to work after a few days of trying various things, but I could not get Wireless N to work, it only operates in G mode. This seems to have something to do with needing to use AES for N-mode. My wireless setup will only work with Ubuntu if I have TKIP set. This of course requires my entire network to work at G speeds. Consequently I am returning my D-Link setup tomorrow, and am looking for the community opinion on what Router/adapter setup is truly out-of-the-box compatible with Ubuntu 10.04. This Router will need to be compatible with other windows based computers on the network running the DWA-140 USB adapters. (I have no PCI slots available).
View 2 Replies View RelatedUbuntu Networking :: 10.04 - How To Use PPTP After Setup
Oct 15, 2010Trying to connect to my office as a PPTP client, I have setup my PPTP connection in Ubuntu 10.04, and the connection is active, as I can see from the top bar, and the output of ifconfig:
Code:
eth0 Link encap:Ethernet HWaddr 00:18:8b:b7:a3:ef
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:580 (580.0 B) TX bytes:580 (580.0 B)
ppp0 Link encap:Point-to-Point Protocol
inet addr:192.168.0.166 P-t-P:192.168.0.254 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:9 errors:0 dropped:0 overruns:0 frame:0
TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:108 (108.0 B) TX bytes:96 (96.0 B)
wlan0 Link encap: Ethernet HWaddr 00:19:d2:7a:96:e5
inet addr:192.168.1.107 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::219:d2ff:fe7a:96e5/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8525 errors:0 dropped:0 overruns:0 frame:0
TX packets:8496 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5799296 (5.7 MB) TX bytes:1408867 (1.4 MB)
Now I want to access the folder named ABC on the remote PC with IP address of 192.168.0.12, with username USER1 and password PASS1.
Ubuntu Networking :: How To Setup Lan And Wifi
Jan 29, 2011setting up the lan and wifi settings
View 3 Replies View RelatedUbuntu Networking :: How To Setup The LTSP
Feb 11, 2011I just bought a old xeon server and am installing ubuntu 10.10 with ltsp, i have also bought 3 thin clients to add to it, what kind of hub or switch do i need to use with it? also is it straight through or crossover cat5 cables that i need? is there any good sites that i should look at for setting this all up, my end goal is to have educational stuff on them for my kids with internet enabled only at certain times, and have movies available from the server for them to watch.
View 1 Replies View RelatedUbuntu Networking :: How To Setup The X11vnc
Mar 5, 2011I am a linux novice with root access to an Ubunutn 10 VM which i connect to via putty. I want to connect to it via a GUI from windows xp so I have tried installing x11vnc on the machine and used realvnc from the xp client I have tried to install x11vnc on the machine as follows
sudo apt-get install x11vnc vnc-java"
x11vnc -storepasswd
iptables -A INPUT -p tcp -d 0/0 -s 0/0 --dport 5900 -j ACCEPT
iptables -A INPUT -p tcp -d 0/0 -s 0/0 --dport 5900 -j ACCEPT
[code]....
This seems to load ok but removes the shell prompt. I presume the server has started and is listening on the ports so i used another putty window to reconnect to my machine and ran sockstat -l and xllvnc is listening on the 2 ports. I then downloaded realvnc windows client and entered the hostname to connect If i entered just the hostname or hostname:5900 i get a timeout error but if i enter hostname:5800 i get 'connection refused' error
