Ubuntu Networking :: Laptop Needs To Map A Windows Network Drive?
Jan 5, 2011
i ve been a thorough user of ubuntu and one reason for me using windows is that office uses a windows based software. i ve been lucky to install the same on my laptop and executing it using wine. the hitch is that whatever i work on the laptop doesnt get updated in the server. is there a mapping needed or some extra configuration ? the documents i post on my laptop is visible within the software but its not shown up on server database.
Since I installed fedora on my desktop (there is no other OS on my desktop computer at the moment) I can't connect to my laptop which has Windows XP installed on it, although I can normally connect to internet from both computers. Here is the drawing to illustrate how everything is connected:
On the picture you can see that the phone line goes to the ADSL modem. The ADSL modem is connected to the Wireless modem with LAN cable. Wireless modem is connected to my desktop computer with LAN cable, and trough the wireless connection to the laptop. Internet is working fine for both computers, but desktop can't see laptop and vice versa. What do I need to do in order to see the laptop?
I bought a new CDROM drive, as recommended by HP. It still doesn't work. I can open and close it now; so that's changed. But it still doesn't appear as a drive, and I can't use it.
Here's as best as I can describe it:
When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time.
In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer.
In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount.
If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.
I've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal: 1.) Learn about network setups on Linux 2.) Be able to maintain my own (virtual) network 3.) Configure my (virtual) network
How do I scan a windows computer from my Ubuntu laptop via the network? I have Ubuntu 10.04 on my laptop. First Windows computer to scan has Windows XP Home Edition Second Windows computer to scan has Windows Vista Home Basic I have Avast 4 workstation and KlamAV insalled on it. What is the steps to make my computer scan those windows computers. And how do I set up my firewall to work with firefox and empathy?
I was trying to figure out how to get my network drive to mount as a local drive on my computer. This was back on 9.10. Since I've upgraded to 10.04, my boot process halts and tells me (paraphrasing) /shared is not ready to mount. To continue, pres S to skip or M to manually mount the drive.
Well, I have it mounting now through GVFS and I don't need this in my startup anymore. Frankly, it's just annoying that it won't boot into Ubuntu right away. So, what's the startup file I need to edit to remove the attempt to mount the network drive?
i can not find the network storage drive on my MS network using Ubuntu.i can find other computer using xSMBrowser but not the hard drive connected to my router (LAN)i have tried samba and a few others
I've just set up OpenSSH on my Ubuntu 8.04 box. Observe no firewall in system services list on ubuntu box. Attempt to ssh using putty from windows laptop attached to same router. Putty connection times out. Can ping ubuntu box from laptop.
I have a server designated as F: drive. This server is a linux server. All computers that access this server are windows machines.
In windows, you can make a "Short Cut" that links a Executable program to the F: drive on the server. When you click on this "Short Cut", Windows will "Run" your program in the exact directory the Executable is located.
Thus, if you Make a "Short Cut" called "Customer" on your network F: drive, you can click on that shortcut and "Customer" will run as if you ran it directly off the F: drive, NOT your station drive of C:
Now *MY* scenario what I WANT to do:
I want to copy the above scenario and be able to do the same thing with Linux and WINE.
I have tried to make a "Shortcut" to my Linux laptop, but it fails. I can only "Copy" the program to the laptop. And when I run it on the laptop, it will not run, because it does not recognize the "F:" drive having all the data files, it only recognizes the C: drive of my linux.
When I tried to make a "link", it says something like "LInk not supported by this file".
So, is it possible to make a "shortcut" to a executable file on the network server, so that if you run the shortcut, it will run the program as if it is located on the F: server instead of the linux station? In Windows, it has a field that says "Target", in which the file will be ran in that directory.
I recently installed Fedora 12 + KDE on my laptop. I also have a media PC which I have connected to my TV. It has an external HD connected to which I am trying to mount on my laptop. It is connected to two other PCs all running Windows 7, part of a workgroup that only requires a password with no user log in. These PCs are working OK but I cant mount the shared drive on my Fedora laptop. I have tried the "Add Network Place" wizard which didnt work. Tried using the host IP rather than the host name. This got me to a user authentication screen which prompted me for a username and password.
As I mentioned before, the only user authentication required to connect to it should be that the device should be within the same workgroup and use the password. Tried using the workgroup name as the username which didnt work, neither did using the PCs usual log in. Eventually I gave up on the wizard and attempted to mount it from the command line using the following command.
I am currently trying to set up two network interfaces in my laptop. The wireless connection wlan0 works fine and it's the one that I use to connect the internet. It's in the range of 192.168.0.x/24 (gateway: 192.168.0.1). The wired interface eth0 is connect to another router (gateway: 10.0.0.13 with IPs in the range of 10.0.0.x/24. The router is set up to work as an AP and the 10.0.0.x network will only be used to control a robot, so no internet access will be required in this network. The problem is that when I have both connections up, I can't access the Internet anymore. I can still ping both routers, I can enter both routers configuration pages but I can't connect to the Internet. If I unplug the network cable, Internet gets accessible again.
I'm still a novice in linux and I can't figure out how to fix this. I don't want to get into static ip for the wireless connection since I'm constantly using the laptop in different places. The objective is to use the 10.0.0.x router to have a development platform for the robot that can be used anywhere without having to reconfigure the robot for a new network, which is a real pain.
In detail, the laptop connects via wireless to the network with intenet (192.168.0.x) and also connects via cable to another wireless router(10.0.0.x). The wireless connection of the second router is used to connect to the robot. Since I can ping both routers when they're both connected, I think it may be something related to the ip routes. I'm using Ubuntu 9.10 with kernel 2.6.31-17-generic
I run Ubuntu 9.04 on a Toshiba NB205. I am suddenly having trouble connecting to the internet using my router or my cable modem for that matter. The weird thing is that I can:(1) connect to other networks just fine, and(2) my router/internet connection work fine when plugged into my desktop.I can't connect whether I'm plugged in with the ethernet cable directly from my modem or from my router, although both work fine when plugged into my desktop. Basically two green lights show up on networkmanager but it doesn't go from there to connecting.So the usual troubleshooting of moving the wires around and trying to connect like that just suggested that my laptop doesn't connect on the one router/internet connection that I happen to need.
sudo ifconfig gives: eth0 Link encap:Ethernet HWaddr xxxxxxxxx
My son has been using 9.10 and when he wanted to play on his XBox live, we just connected a ethernet cable to the Xbox and laptop then clicked on the wireless icon and clicked on wired connection and then he could play on his Xbox. But since upgrading to 10.04 this just will not work. We have tried with the XBox off and on, the wired connection connects but the XBox will not find the connection.
My latop has suddenly lost it's ability to see my main computer. I have changed nothing other than updates and a few non-network related program installs. The laptop is an HP Pavillion DM3 running 10.10 and the PC is a Dell XPS400 running 10.04.01. I have both Samba and folder sharing in use. I have checked all the permissions etc on the shares and in Samba and everything is as it was and should be. So I am confused. How do I get it back and why did it go away?
After many hours of searching forums, help files, turning on/off firewalls, etc, I need someone far smarter than myself to help me connect to the above machine. I also looked into Samba and do not understand how to use it. It is installed on my Linux laptop, but I have no idea how to access it. I'm hoping that connecting to my Windows laptop is a fairly simple process.
I was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
I would share my long awaited success with connecting my ubuntu laptop up to my universities (University of Western Sydney) wireless network. The rumors appeared true and they have finally implemented 802.11x authentication instead of that horrible java app netdirect. I am sure you've been cursing at its erratic stability. There is no linux documentation for airUWS-Lite nor anything more imformative than there windows/mac point and click steps found at [URL]. However with a few simple clicks you can have stable working connection.
When connecting make sure you have theses settings. Security: WPA & WPA2 Enterprise Authentication: Protected EAP (PEAP) #This is the settings that does not present itself correctly Anonymous Identity: leave blank PEAP Version: Automatic Inner Authentication: MSCHAPv2 Username: <YOUR 8 DIGIT STUDENT NUMBER> Password: your regular password
have Karmic Coala runing on an IBM thinkpad X.41. Works great. My home network is all ethernet so I have a router , CAT5 cable to laptop.A coupleof times I've had power outages The laptop carries on as it's on battery power. When the power comes back , the router restarts, it reconnects after a few minutes but the laptop doesn't reconnect to the network seamlessly. On some other Linux distro's I've had running /etc/init.d/network restart will refresh everything. On Ubuntu I have /etc/init.d/networks but running restart In the end I needed to reboot the laptop to get the network back on.Perhaps this is a power management issue with the laptop ethernet card i.e losing power powers down the card and it never comes back up properly.
I got a laptop with wireless. Next to it I got 2 desktops, neither of which have a wireless card and I don't have any usb wireless adapters or anything. I do however have an ethernet cord. In the past I was able to set my eth0 connection to be "shared to other computers", then from my laptop I could run the patch cable to the desktop and voila, internet to the desktops.
For some reason though, now whenever I try to connect from the desktops, there are 2 green circles and a little blue circley thing going around them. it spins for a while and then says disconnected. Also, now if (on my laptop) I connect to the wired network, my wireless stops working. I'm kind of stumped here, I tried deleting both connections from both computers, setting everything up again, and connecting, and I get the same problem. Also seeing as how I'm trying to troubleshoot this from my laptop and watch this thread, I can't exactly mess around with it much right now or I won't see any replies.
sudo su was not originally in the steps but it wouldn't give me permission to edit the samba file unless I did.Also at the end it said command not found or something like that when I tried to restart samba, so I just logged out and then back in.So now I can identify Ubuntu and Win 7 from on each other, but I can not access either of them. Ubuntu goes into windows network, then workgroup, shows the computers on the network but when I try to access one this comes up:When windows tries to access Ubuntu it request for username and password. I type it in but it does not recognize it.
P.S. I allowed the Documents folder on Ubunto to share across the Network, and while it shows up in along with myshare on Win 7, it still requests for username and password.
i just got my xubuntu , and i'm pretty satisfied with it , i mean : it works ok for my very old system (512mb ram , integrated video card , pentium4 procesor 478 2.8 ghz) forced to use it , because i had to take my motherboard to warranty .... anyway , i just wanted to know how can i connect my pc ( xubuntu ) with another laptop ( i would like to have file transfer , and why not control over the desktop from my laptop , or control my laptop from my pc , i think it is called remote desktop ) . My network connection is through a modem , that is connected to a router from which goes a lan cable to my pc (xubuntu ) and my laptop is wireless connected to the router . My laptop is using windows 7.
I am trying to access the files on my windows pc. I am trying to access them from my laptop which has mandriva 2009. I have both computers connected through the same internet router, and i am succesfully accessing windows share files and remote control. The problem is, i dont want to move the files i want from their current location, to a share folder, and then onto my laptop. The main problem is that my whole family uses the pc, and while they are logged on i cannot remote control.
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci 00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
I have installed Micro Core onto a usb of mine and am running it on my laptop. I have been able to successfully obtain a connection and valid ip with my router. As you can see below my wireless connection seems valid computer-end and on my router's page it comes under the list of attached devices.Although this is all fine and dandy, I'm am unable to ping my router or any other computer on my network, I am also unable to ping my laptop from other computers on the network. Also by the looks of it I have having no trouble transmitting, but I am not receiving any packets.
I have a windows 7 (64bit sadly) desktop computer with no wireless capability. Now before I go out and spend money on a wireless usb thing, I was wondering if I could use my laptop (Ibm think pad T60 running ubuntu 10.10 dual boot with crunch bang) As a wireless access-point and connect via Ethernet cable the laptop to the desktop (Probably through a modem?) so I can use the Internet for games on the desktop computer. (Games that wont work in wine, sigh). Just a note though, 64 bit windows 7 will NOT run anything.
I have two ubuntu 11.04 laptops that today stopped working with my home wifi, but my windows laptop works fine. These same ubuntu laptops connect fine to iPhone wifi hotspot.
Im trying to setup samba so that i can copy some files from my windows 7 machine over to the drive on the opensuse machine running 11.2. i believe i set everything how it should be set up but no matter what i do i cant write filesfrom the windows machine. Here is my smb.conf
# smb.conf is the main Samba configuration file. You find a full commented # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the # samba-doc package is installed. # Date: 2009-10-27 [global]
I am accessing network drive (Z:stream) on windows. Now the permission set on stream folder is like chmod -R 777 streams/ means all the files inside stream is at 777 but now i am copying some files from windows to this streams folder but permission on those files are not 777 ,i would like to have permission 777 on those files that copied from windows ...how do i do that??
