Ubuntu Networking :: How To Setup The Network Before Login

Aug 23, 2010

I was wondering if there was some "clean / easy / official" way to enable networking during boot up and before a user logs in, other than editing /etc/network/interfaces by hand? Could be useful when away and in need of rebooting and still be able to access the computer, etc. I wouldn't mind doing it by CLI but just wondering if there is a GUI / simpler solution.(On Ubuntu 10.04.1)

View 1 Replies


ADVERTISEMENT

OpenSUSE Network :: 11.2 Xen Bridged Networking - Setup Multiple DomU Through The Default Bridge Setup

Feb 4, 2010

Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?

[Code]....

View 1 Replies View Related

Fedora Networking :: Setup The Network Scripts To Create Two Network Interfaces For Vlan X And Y?

Apr 7, 2009

Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.

View 2 Replies View Related

Fedora Networking :: Cannot Find Network Card While Setup Network Configuration?

May 25, 2010

Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .

View 1 Replies View Related

Red Hat :: Networking - Setup Network Scripts To Create Two Network Interfaces For Vlan X And Y

Apr 7, 2009

Can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.

View 4 Replies View Related

CentOS 5 Networking :: Setup A Network To Network VPN Tunnel Between Our Main Office And A Temporary Location?

Aug 12, 2009

I am attempting to setup a network to network VPN tunnel between our main office and a temporary location. This location need full VPN access back to the main office's network.Anyhow we have spent about 3 solid days attempting to make this work without any great success. Here is our network scheme for these two devices.

Network A (Main Office) (OpenBSD using isakmpd)
Network: 172.16.8.0/24
External IP: 1.1.1.1 (obviously not the real IP)[code].....

View 2 Replies View Related

Networking :: Xen Network-route And Network-bridge Setup?

Aug 22, 2010

I've currently got a Xen box with 3 Virtual machines on it, in a routed setup. I'd like to put them all on a private internal network as well, which I'm assuming I'd do with a dummy network card and a xen bridge, but I can't find any information about setting up the xen Bridging setup on top of the existing network-route instlal.

View 1 Replies View Related

Networking :: Feasible / Desirable To Setup A Network Of Virtual Machines To Use As An Environment To Learn Networking?

Nov 18, 2010

I've been learning linux for a while now with half an eye on making a career out of it in future. One sizeable gap in my knowledge at the moment is networking. Is it feasible/desirable to set up a network of virtual machines to use as an environment to learn networking? My budget is non-existent so I was hoping to be able to get a basic understanding of the principles from installing a few desktops, a virtual gateway etc on VMware workstation on my laptop, and doing a lot of reading online.

Is this feasible, or will I just end up learning about virtual networks instead of real ones? Also how much power would be required, because my 3GB RAM lappy has just gone bang and all I have now is a (new) 1GB RAM lappy.

View 10 Replies View Related

Ubuntu Networking :: Setup Simple Network For Ssh'ing

Mar 1, 2010

All i really want to do is be able to ssh into my other linux system. I am not interested in internet sharing, or even file sharing.[linux laptop with unused ethernet port]-windows-mobile-ppc connected by usb for internet-tehtering [linux running on my wii accross the room]-nintendo lan adapter.I want to be able to ssh login to my wii, from my laptop. That is all i want. Do i need a router in between the two for this, or can i just connect them with ethernet cable?No samba, no nfs, no fancy stuff. Just want to be able issue commands from laptop to my wii.

View 9 Replies View Related

Ubuntu Networking :: How To Setup A Wireless Network

Jun 7, 2010

I want to setup a wireless network in my lab. Main reason is that I want to be able to print from every computer, but it would also be nice if we can share files. I have three 64 bit machines, a netbook and 32 bit notebook and my internet goes via an Wifi router to which other Windoooze machines connect. I want to change to Lucy now and hope it is easier to setup the network in clean manner.

View 8 Replies View Related

Ubuntu Networking :: How To Setup WPA2 On Network?

Jul 24, 2010

Well I recentelly read some tutorials about "cracking" wep networks, and seems like it's kind of easy ( I Haven't tried'em out since I don't have my laptop right now, but i'll try them as soon as i get it back )So i'd like to change my network protocol to wpa2, but I REALLY GOT NO IDEA on how to do this.Does someone knows about a tutorial on how to do this?

View 5 Replies View Related

Ubuntu Networking :: Copy Network Setup ?

Apr 11, 2011

At my workplace, Ubuntu connects to the wireless internet with no problem at all. When I log into openSUSE or PClinuxOS (the other two distros I use) I can't connect. Is there a way to copy the network files from Ubuntu to at least, not replace, but use as a reference for trying to trouble shoot my other two distro networking issues?

View 2 Replies View Related

Ubuntu Networking :: How To Setup Network Bridge

Jul 29, 2011

How do I setup a network bridge in Linux (Ubuntu)? I want to use my computer as a "router" for my Xbox 360.

View 2 Replies View Related

Ubuntu Networking :: Ad-hoc Network Setup Fails?

Sep 1, 2011

I'm trying to share the internet connection from my Ubuntu 11.04 desktop to one of my laptops (Mac OS X) using an ad-hoc network. Really I don't care what kind of AP the desktop broadcasts as long as I can share the internet connection. According to the documentation on the hardware the adapter supports ad-hoc. However I am getting the 8B06 error below.

The problem:
iwconfig wlan0 mode ad-hoc yields ->
Error for wireless request "Set Mode" (8B06) :

[code]....

View 2 Replies View Related

Networking :: How To Network Setup?

Aug 18, 2010

I'm trying to set up a network in the manner shown in the attached schematic. My problem is the ones hightlighted in purple, everything else is working fine. Could someone give me a quick tips on how this can be done (if at all possible)?The computer the router is connected to will be running linux (ofcourse).
What mode should i set the router to? I've listed the available modes below.Is there any way i can prevent the game consoles (or computers) from being able to contact anything but internet past the router or bridge computer? i.e the bridge computer becomes the only visible gateway?I'd prefer them to have their own ip range behind the bridge computer/router and use the DHCP function in the router, or perhaps setup DHCP on the bridge computer.I would like to be able to view the traffic going trough the bridge computer.What gateway and dns ip setup should i use on the router and the consoles/computers connected to the router?

View 3 Replies View Related

Ubuntu Networking :: Setup Network Sharing Between 9.10 And Vista?

Mar 7, 2010

Trying to set up network sharing between Ubuntu 9.10 and Vista. I already did this with a wired Ubuntu 9.10 desktop and my Vista laptop but for some reason my Ubuntu 9.10 wireless and Vista wireless aren't as easy. They are all on the same workgroup "MAGIC" and I can see my ubuntu shares on the Vista computer but can't see the Vista shares on the ubuntu computer. In ubuntu I go to network>windows network>MAGIC but it times out at the MAGIC workgroup part and says 'unable to mount'.

[URL]

but no luck I also checked and there isn't a firewall that's in the way.

View 3 Replies View Related

Ubuntu Networking :: How To Setup Local Network (Exchange)

Mar 29, 2010

I have (adsl router "rebotic") and we are 3 nodes sharing Internet the question is: want make network (exchange files) between me (ubuntu os) and one of my internet members ,and I don't know how can I set up network between us in ubuntu.

View 1 Replies View Related

Ubuntu Networking :: Setup Network For Both The Internet And WUG At The Same Time?

Aug 27, 2010

There is 2 networks that I would like to be part of

a) Through my wlan0 --> Internet DSL

and

b) Through my eth0 --> WUG - PTAWUG

I can only get one of the networks to work at 'n time. The wlan0 works fine when I start my PC, but when I want to access the WUG I need to do the following command:

Code:

sudo route add -net 172.16.0.0 netmask 255.240.0.0 gw 172.24.6.177 dev eth0

with the above command, I can then access the WUG but not the internet through my wlan anymore.all data goes to my wlan as standard unless its on the 172.16.0.0 network

View 5 Replies View Related

Ubuntu Networking :: Setup A Simple Home Network?

Feb 6, 2011

I have three PC's. PC-1 is a newish Dell Vostro 320 running Win 7 as the prime OS with Ubuntu Linux 10.10 dual boot under the control of EasyBCD. PC-2 is a Dell Inspiron 6400 running Ubuntu Linux (10.10). PC-3 is an oldish Dell Inspiron 6000 laptop dual booting Win 7 and Ubuntu 10.10. All three PC's share a DSL connection to our ISP and network using the wireless router capability of the DSL box (a Billion 7401 VGP-M). All three PC's can access the internet using the DSL box both wired and wirelessly under Windows or under Linux. PC-1 is the primary PC and runs Win 7.

PC-2 (Ubuntu 10.10) is running fantastically well and can access PC-1 running Win7 as a member of WORKGROUP for print sharing and for file sharing. The primary PC-1 can also see the files on PC-2 as a member of a Windows WORKGROUP. Simple home networking is working as it should with this setup (PC-1 under Win 7 and PC-2 under Ubuntu 10.10). This has been like this since the installation of Ubuntu on PC-2, which included setting up network printing from PC-1 (Win 7) under Samba.

The problem is thus: If I boot PC-1 or PC-3 up under Linux, I lose all networking capability between the three PC's including print and file sharing, but they can all access the internet through wireless or wired connection. I have configured Samba and done all the home networking troubleshooting especially:[URL]..All to no avail. As I said, my aim to ditch Windows and move all three PC's to Linux but I can't do this unless I can get Linux home networking working properly. By properly, I mean all PC's running Linux or two under Linux and one under Windows 7 and be able to share files and a printer attached to PC-1. I am a Linux virgin and am hoping that a knowledgeable person can tell me what's going wrong and point me to setting up a simple home network under Linux. It shouldn't be this hard.

View 7 Replies View Related

Networking :: How To Copy Network Setup?

Apr 11, 2011

At my workplace, Ubuntu connects to the wireless internet with no problem at all. When I log into openSUSE or PClinuxOS (the other two distros I use) I can't connect. Is there a way to copy the network files from Ubuntu to at least, not replace, but use as a reference for trying to trouble shoot my other two distro networking issues?

View 1 Replies View Related

Networking :: How To Setup Class B Network

Dec 19, 2008

I work for an organization on which is growing up with pcs, I set up a linux but with a class c net (192.168.1.0/24) and dhcp for 250 clients, so my question is, how to change from class c to class b since now the org have now 300 pcs that need to be connected each other with printers and everything.

View 2 Replies View Related

Networking :: Static Network Setup?

Aug 16, 2010

I have a fresh install of Centos 5.x and I'm having issues on setting up the network...i know i have to edit/etc/sysconfig/network-script/ifcfg-eth0 and create an ifcfg-eth0:0 right?im just having issues getting everything setup correctly.my network setup:Router IP: 192.168.2.1IPs on network: 192.168.2.xNetmask: 255.255.255.0

View 3 Replies View Related

Ubuntu Networking :: Setup Home Network And Share Files?

May 31, 2010

I just switched over to ubuntu 10.04 LTS Netbook Edition from Windows XP and I am wondering how to setup a home network and share files with other computers in my house? I tried going to Preferences -> Personal File Sharing. But the options for 'Share Files over the Network' is grayed out. The message is "This feature cannot be enabled because the required packages are not installed on your system."

View 9 Replies View Related

Ubuntu Networking :: Lan Setup - Connecting To Eth0 Then Network Disconnected

Dec 22, 2010

i have limited experience with Ubuntu and Linux for that matter. i know my way around for the most part but i come from windows. anyway. i have 6 dell gx260 computers. i also have a netgear 8 port Ethernet switch. now im just trying to get the computers to see each other. simple for me in windows. but i have no idea where to start here. it just says connecting to eth0 then network disconnected. and thats it. for now im just working with 2 of the computers. the others are not set up yet. i have been googling for 3 days and got nothing that helps. (my goal after they see each other is to share files back and forth. and also to have one of them control the others with some type of remote desktop. but thats for another day.)

View 1 Replies View Related

Ubuntu Networking :: Setup A Network Of 21 Computers Running Edubuntu 10.10?

Feb 7, 2011

I have recently set up a network of 21 computers running Edubuntu 10.10 I use iTalc to communicate with the pcs and also to shutdown all of them at once. The only problem I have, is it doesn't start up again with iTalc. So I switched to ClusterSSH. Only problem I have now is that everytime I run cssh, I need to manually add IP addresses of all the pc's, before I can start issuing commands. Is there a config file or something I can populate with all the IP addresses so that it starts up with all of them already added? And while we are at it, the command to start up a computer on the network?

View 2 Replies View Related

Ubuntu Networking :: GUI Network Setup And Command Line Not Reflecting Changes?

Mar 6, 2011

I'm running Ubuntu 10.04 LTS, Lucid Lynx and I'm having problems implementing changes to interfaces.I have made changes to my interfaces via the GUI but when I open a terminal window and so a ifconfig I find that nothing has changed. I've opened an editor and looked at etc/network/interfaces but changes made with the GUI never make it to the config file.Does the networking GUI result in changes to the etc/network/interfaces file.

View 1 Replies View Related

Fedora Networking :: Network Print Setup

Jul 14, 2011

Fedora 15/Gnome3, latest updates as of 4pm EST 7/14/11.Trying to connect to a Canon inkjet printer, which is physically on a WindowsXP box via usb cable. Printer is made shared on the Windows machine.On the F15 machine, I can connect to all shared folders on the WinXP box via SMB.But trying to set up the printer connection from WinXP box to F15 is not working. I use Printing, then Network Printer, then enter the WinXP IP, then choose Find Network Printer. Note there's no CUPS or SMB printer choice - only AppSocket/JetDirect, IP, HTTPS/ and LPD. After a few minutes, I'm prompted to enter username and p/w for the WinXP machine, and the printer is located. Connection is verified.Connection is shown as Windows via SAMBA. I click OK and move to driver installation.

View 3 Replies View Related

OpenSUSE Network :: Setup Bridged Networking On 11.4 With Xen

Aug 20, 2011

Newbie Question: How do I setup networking on openSuSE 11.4 on an HP Proliant DL385 G7 with 4 NICs to host Windows 2008 R2 on Xen? I've installed openSuSE 11.4 with all the patches (and most of the server patterns - Mail and News, LAMP, LDAP, Samba, etc.), and I've installed Windows 2008 R2 in a Xen virtual machine. I'm having problems configuring the 4 NICs eth0, eth1, eth2, eth3 are "bound" without an ip_address as br0

eth0 connects to my ISP - currently through a private LAN - It connects directly to the router with static IP 192.168.0.105 Eventually, one of the other NICs will serve ip_addresses via DHCP to a separate LAN (for use in an office setting), and eth0 will be set with a static IP from the ISP That means, eth0 will be static to the ISP, and the other NICs will attach to a switch serving private ip_addresses in the 192.168.0.xxx range.

Currently, I have br0 unconfigured and eth0 static. I have configured eth0 in the External Zone and br0 in the Internal Zone in the firewall, and all the correct ports are opened (afaik) I have enabled masquerading. Hostname, Domain (workgroup), DNS Server addresses and IPv4 Gateway are configured.

Windows 2008 R2 (Guest VM in Xen) "sees" the other machines on the network, and "browses" the internet, although it will not download patches except intermittently. I have not tried connecting to it from the LAN Eventually, I wish to run Windows Terminal Server. openSuSE cannot "browse" the internet, though it initially did. What am I missing? I "think" I need routing or NAT, or I may have my bridge setup incorrectly, although I've tried almost every combination. Google says Xen should be setup with either NAT or a Bridged Network.

Output of ifconfig:
br0 Link encap:Ethernet HWaddr 3C:4A:92:76:B8:F2
inet6 addr: fe80::3e4a:92ff:fe76:b8f2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:953 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:119849 (117.0 Kb) TX bytes:368 (368.0 b)
[Code].....

View 2 Replies View Related

Networking :: How To Setup A Network Place In XP (SP3) For A Server?

Jan 27, 2010

I would like to have ftp access the files on a Linux Server using XP. It's easy with a windows server but Microsoft doesn't work with the Linux server.

View 3 Replies View Related

Networking :: Samba Network Printer Setup - How To Add

Jun 7, 2010

I would like to create a dedicated Samba print server. I have two printers on my LAN, one printer came with its own NIC and the other is on a Win server box. I would like to setup Samba so that I can just access that server (Samba printer server) and both network printers will show up on there for me to connect to. On that note, can I also load the drivers on my Samba server? Drivers for different Windows flavours and also Mac OSX drivers.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved