Fedora Networking :: Network Print Setup
Jul 14, 2011
Fedora 15/Gnome3, latest updates as of 4pm EST 7/14/11.Trying to connect to a Canon inkjet printer, which is physically on a WindowsXP box via usb cable. Printer is made shared on the Windows machine.On the F15 machine, I can connect to all shared folders on the WinXP box via SMB.But trying to set up the printer connection from WinXP box to F15 is not working. I use Printing, then Network Printer, then enter the WinXP IP, then choose Find Network Printer. Note there's no CUPS or SMB printer choice - only AppSocket/JetDirect, IP, HTTPS/ and LPD. After a few minutes, I'm prompted to enter username and p/w for the WinXP machine, and the printer is located. Connection is verified.Connection is shown as Windows via SAMBA. I click OK and move to driver installation.
View 3 Replies
ADVERTISEMENT
Apr 7, 2009
Using Fedora 10, can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 2 Replies
View Related
May 25, 2010
Cannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies
View Related
Jul 14, 2010
To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?
View 1 Replies
View Related
Mar 26, 2009
So I have two network Interfaces
eth0 - NAT behind a router
eth1 - Public IP
When ever I restart the machine, both interfaces pull a IP, but the it randomly chooses eth0 or eth1 to have the gateway. I want the gateway to be eth0 always.
[Code]...
Is there some file or setting I can modify in Fedora10 that will always choose 192.168.1.1 on eth0 as the default gateway?
View 2 Replies
View Related
Mar 29, 2009
how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
View 2 Replies
View Related
Nov 18, 2009
I am trying to set up bridge, and everything seems to be ok, except 1 thing, it disappears after reboot. So, what I am doing:
Code:
brctl addbr br0
brctl addif br0 eth0
and adding /etc/sysconfig/network-scripts/ifcfg-br0, here it is:
Code:
GATEWAY=192.168.1.1
DEVICE=br0
BOOTPROTO=none
NETMASK=255.255.255.0
DNS1=208.67.222.222
DNS2=208.67.220.220
TYPE=bridge
HWADDR=00:18:f3:75:18:78
IPADDR=192.168.1.3
IPV6INIT=no
ONBOOT=yes
USERCTL=no
and my ifcfg-eth0 is:
Code:
GATEWAY=192.168.1.1
DEVICE=eth0
BOOTPROTO=none
NETMASK=255.255.255.0
DNS1=208.67.222.222
DNS2=208.67.220.220
TYPE=bridge
HWADDR=00:18:f3:75:18:78
IPADDR=192.168.1.3
IPV6INIT=no
ONBOOT=yes
USERCTL=no
How to make it working after reboot?
View 1 Replies
View Related
Feb 4, 2010
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
View 1 Replies
View Related
Nov 7, 2010
I'm running Mint 9 as my main network and my wifes Acer Aspire 5610 running Windows vista. My problem is that I can't print from vista. It prints a test page just fine but when I tell it to actually print a document, the status says: "Access denied, unable to connect" I have 2 printers connected and they installed fine in Vista one is a HP LaserJet 2100 series and the other is an HP Photosmart C5280. Like i said, they both print the teat page just fine.
View 9 Replies
View Related
Mar 25, 2010
The company I work for decided to use printers on which one should log in with there MS Windows password. After logging in, one could print there documents. This is ok for the MS windows office PC's, but not for the Linux based systems.The Linux user accounts have a different name than the MS Windows accounts.Because of this, it is not possible to print with that Linux user account. I can create a Linux user account with the same username as the MS Windows account, so that all users can use that account if they want to print something on the network printers. They can use it like:$ ssh <username equal to Windows>@<hostname> "oowriter <path>/<file>"
Now they can print a file from oowriter to the network printer.So my question is, is it possible to use the account name that is equal to the MS windows account name by default?
example
MS Windows account name = milk
Linux account name = schuurs
Linux account "milk" is created for printing by all users.
user works with account "schuurs" and prints with user "milk" automatically without the use of the ssh string mentioned before.
View 2 Replies
View Related
Sep 8, 2009
I'm using Slackware64 13.0 on a laptop. I've set up the network printer which lives on a Windows Vista machine (not my choice) in the family room. I am able to send print jobs to the printer. That part works fine, but the printer does not print. It simply stacks up print jobs with "error - printing" in the status of the first print job.I think I understand what's happening. I'm sending the print jobs to the print server as "Guest" and I have no guest account activated on the vista machine. I'm sitting here racking my brain (ie googling my goddamn fingers into stumps) trying to figure out how to send the jobs to the print server as indubitableness.
For the goddamn life of me I can't figure out what I need to do to send these print jobs as a specific user. I've tried adding "valid users = indubitableness" to smb.conf and I've tried using the -U flag when running lpadmin to add the printer to my system in the first place.The configuration wizard for windows doesn't appear to have any options to enable guest access or to add a specific remote location and/or user to the allow list.I'm at a loss and I'm losing my goddamn mind.
View 3 Replies
View Related
Nov 30, 2010
I live in Japan and am trying to print to a network printer (Richo Ipsio C411 PS). Couldn't find the ppd in the foomatic database. At my previous school, I had no problems printing to the printers on the network once I found the ppd. A few months ago, I transfered to a new site. Unfortunately, when I send a print job on the network here, the printer just gives a Japanese message that says "command error." I've tried other printers on the network (all different models of the Ipsio).
I went to the Japanese Ricoh website and it recommended a generic printer ppd. I downloaded that, but it didn't work. Then I got the ppd off of the windows driver CD and tried that. Again, no success. I have no idea what I'm doing (obvious, but should be noted) or how to get this started. I also tried 2 versions of Ubuntu -- I'm running 8.04 and 10.04.
Attached are copies of the ppd files if it helps.
View 8 Replies
View Related
Nov 18, 2010
I just recently bought a WinStar USB LPR Network Print Server so that I could connect my printer to my network so all the machines on my network could print, and everything would be OS independent. The problem I'm having is that I can't get CUPS to connect to the printer. It either never prints anything, saying that the printer is not connected, or saying that LPR is spooling the job, but it never completes. I've been configuring it as a network printer in CUPS, and trying all the different configuration options to no avail. The print server is located on http://192.168.1.103 and is pingable. The print server I have is this one:
WinStars Networking USB LPR Print Server
What is the correct way to set up a print server like this so I can print to it?
View 6 Replies
View Related
Jan 24, 2011
I'm hoping this is the right category. Is there a terminal command to display what network you're currently connected to?
Example:
My home network's name is (in this example) "home".When connected to it, I want a command that, when run, would give me the output 'home'. Does such a command exist?
View 1 Replies
View Related
Apr 7, 2009
Can anyone tell me how to setup the network scripts to create two network interfaces for vlan x and y. Both interfaces should obtain an ip from dhcp and both interfaces should run over eth0.
View 4 Replies
View Related
Aug 12, 2009
I am attempting to setup a network to network VPN tunnel between our main office and a temporary location. This location need full VPN access back to the main office's network.Anyhow we have spent about 3 solid days attempting to make this work without any great success. Here is our network scheme for these two devices.
Network A (Main Office) (OpenBSD using isakmpd)
Network: 172.16.8.0/24
External IP: 1.1.1.1 (obviously not the real IP)[code].....
View 2 Replies
View Related
Jul 18, 2011
I have a Brother MFC-295CN network printer. Been having a heck of a time trying to get this thing working since I installed Ubuntu 11.04 yesterday. I've been away from Linux for some time and am new at using it. Downloaded and installed using the Software Center:
mfc295cnlpr-1.1.2.i386-1.deb
mfc295cncupswrapper-1.1.2-2.i386.deb
brscan3-0.2.11-4.i386.deb
brscan-skey-0.2.1-3.i386.deb
Was able to send a test print and it came out fine. But when I tried to send a print job - nothing. And, the scanner won't work either.
My computer is a Gateway GT5464. It's dual booted with Windows 7.
View 1 Replies
View Related
Aug 22, 2010
I've currently got a Xen box with 3 Virtual machines on it, in a routed setup. I'd like to put them all on a private internal network as well, which I'm assuming I'd do with a dummy network card and a xen bridge, but I can't find any information about setting up the xen Bridging setup on top of the existing network-route instlal.
View 1 Replies
View Related
Nov 18, 2010
I've been learning linux for a while now with half an eye on making a career out of it in future. One sizeable gap in my knowledge at the moment is networking. Is it feasible/desirable to set up a network of virtual machines to use as an environment to learn networking? My budget is non-existent so I was hoping to be able to get a basic understanding of the principles from installing a few desktops, a virtual gateway etc on VMware workstation on my laptop, and doing a lot of reading online.
Is this feasible, or will I just end up learning about virtual networks instead of real ones? Also how much power would be required, because my 3GB RAM lappy has just gone bang and all I have now is a (new) 1GB RAM lappy.
View 10 Replies
View Related
Aug 18, 2010
I'm trying to set up a network in the manner shown in the attached schematic. My problem is the ones hightlighted in purple, everything else is working fine. Could someone give me a quick tips on how this can be done (if at all possible)?The computer the router is connected to will be running linux (ofcourse).
What mode should i set the router to? I've listed the available modes below.Is there any way i can prevent the game consoles (or computers) from being able to contact anything but internet past the router or bridge computer? i.e the bridge computer becomes the only visible gateway?I'd prefer them to have their own ip range behind the bridge computer/router and use the DHCP function in the router, or perhaps setup DHCP on the bridge computer.I would like to be able to view the traffic going trough the bridge computer.What gateway and dns ip setup should i use on the router and the consoles/computers connected to the router?
View 3 Replies
View Related
Aug 14, 2010
Just installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.
View 1 Replies
View Related
Apr 11, 2011
At my workplace, Ubuntu connects to the wireless internet with no problem at all. When I log into openSUSE or PClinuxOS (the other two distros I use) I can't connect. Is there a way to copy the network files from Ubuntu to at least, not replace, but use as a reference for trying to trouble shoot my other two distro networking issues?
View 1 Replies
View Related
Dec 19, 2008
I work for an organization on which is growing up with pcs, I set up a linux but with a class c net (192.168.1.0/24) and dhcp for 250 clients, so my question is, how to change from class c to class b since now the org have now 300 pcs that need to be connected each other with printers and everything.
View 2 Replies
View Related
Aug 16, 2010
I have a fresh install of Centos 5.x and I'm having issues on setting up the network...i know i have to edit/etc/sysconfig/network-script/ifcfg-eth0 and create an ifcfg-eth0:0 right?im just having issues getting everything setup correctly.my network setup:Router IP: 192.168.2.1IPs on network: 192.168.2.xNetmask: 255.255.255.0
View 3 Replies
View Related
Aug 20, 2011
Newbie Question: How do I setup networking on openSuSE 11.4 on an HP Proliant DL385 G7 with 4 NICs to host Windows 2008 R2 on Xen? I've installed openSuSE 11.4 with all the patches (and most of the server patterns - Mail and News, LAMP, LDAP, Samba, etc.), and I've installed Windows 2008 R2 in a Xen virtual machine. I'm having problems configuring the 4 NICs eth0, eth1, eth2, eth3 are "bound" without an ip_address as br0
eth0 connects to my ISP - currently through a private LAN - It connects directly to the router with static IP 192.168.0.105 Eventually, one of the other NICs will serve ip_addresses via DHCP to a separate LAN (for use in an office setting), and eth0 will be set with a static IP from the ISP That means, eth0 will be static to the ISP, and the other NICs will attach to a switch serving private ip_addresses in the 192.168.0.xxx range.
Currently, I have br0 unconfigured and eth0 static. I have configured eth0 in the External Zone and br0 in the Internal Zone in the firewall, and all the correct ports are opened (afaik) I have enabled masquerading. Hostname, Domain (workgroup), DNS Server addresses and IPv4 Gateway are configured.
Windows 2008 R2 (Guest VM in Xen) "sees" the other machines on the network, and "browses" the internet, although it will not download patches except intermittently. I have not tried connecting to it from the LAN Eventually, I wish to run Windows Terminal Server. openSuSE cannot "browse" the internet, though it initially did. What am I missing? I "think" I need routing or NAT, or I may have my bridge setup incorrectly, although I've tried almost every combination. Google says Xen should be setup with either NAT or a Bridged Network.
Output of ifconfig:
br0 Link encap:Ethernet HWaddr 3C:4A:92:76:B8:F2
inet6 addr: fe80::3e4a:92ff:fe76:b8f2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:953 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:119849 (117.0 Kb) TX bytes:368 (368.0 b)
[Code].....
View 2 Replies
View Related
Mar 1, 2010
All i really want to do is be able to ssh into my other linux system. I am not interested in internet sharing, or even file sharing.[linux laptop with unused ethernet port]-windows-mobile-ppc connected by usb for internet-tehtering [linux running on my wii accross the room]-nintendo lan adapter.I want to be able to ssh login to my wii, from my laptop. That is all i want. Do i need a router in between the two for this, or can i just connect them with ethernet cable?No samba, no nfs, no fancy stuff. Just want to be able issue commands from laptop to my wii.
View 9 Replies
View Related
Jun 7, 2010
I want to setup a wireless network in my lab. Main reason is that I want to be able to print from every computer, but it would also be nice if we can share files. I have three 64 bit machines, a netbook and 32 bit notebook and my internet goes via an Wifi router to which other Windoooze machines connect. I want to change to Lucy now and hope it is easier to setup the network in clean manner.
View 8 Replies
View Related
Jul 24, 2010
Well I recentelly read some tutorials about "cracking" wep networks, and seems like it's kind of easy ( I Haven't tried'em out since I don't have my laptop right now, but i'll try them as soon as i get it back )So i'd like to change my network protocol to wpa2, but I REALLY GOT NO IDEA on how to do this.Does someone knows about a tutorial on how to do this?
View 5 Replies
View Related
Aug 23, 2010
I was wondering if there was some "clean / easy / official" way to enable networking during boot up and before a user logs in, other than editing /etc/network/interfaces by hand? Could be useful when away and in need of rebooting and still be able to access the computer, etc. I wouldn't mind doing it by CLI but just wondering if there is a GUI / simpler solution.(On Ubuntu 10.04.1)
View 1 Replies
View Related
Apr 11, 2011
At my workplace, Ubuntu connects to the wireless internet with no problem at all. When I log into openSUSE or PClinuxOS (the other two distros I use) I can't connect. Is there a way to copy the network files from Ubuntu to at least, not replace, but use as a reference for trying to trouble shoot my other two distro networking issues?
View 2 Replies
View Related
