Ubuntu Networking :: How To Allow DAAP In Firestarter?
Oct 22, 2010
I allowed ports 3689 and 5353 for incoming and outgoing traffic in firestarter but my other machines wont detect a DAAP share. They do see them when I turn off firestarter. I'm even more confused when I see that I have a local connection using port 56690 when I turn off firestarter and monitor the log. It seems that DAAP is using 56690 but when I allow it for incoming/outgoing it still doesnt pick up my DAAP shares.
Is there a way I could fix this? I mean, I could run without a firewall but...idk if thats such a good idea :/
View 1 Replies
ADVERTISEMENT
May 15, 2011
I have two computers and I'm trying to get them to talk to each other, but after I installed Fedora 14 on this computer, my other computer can't connect to this.
[code]...
Same with DAAP I'm using rhythmbox to both broadcast and listen to the DAAP, and the rhythmbox on the remote computer cant connect here either. ssh and VNC are working on the other computer as well, I can connect to other computers using ssh on both computers, and I can VNC over to the other computer without any problems, its the traffic going myway that seems to be hitting a roadblock. is it possible that since I installed a different system (was Ubuntu Natty before, and I was using all three services before I installed Fedora), I need to do something on my remote computer so that this won't crop up?
View 9 Replies
View Related
Feb 5, 2010
I installed firestarter and then at a later date uninstalled/purged it, both actions via synaptic. I have a very verbose boot, I like to see what's going on, and noticed after the uninstall/purge that I was getting an error zooming up the screen containing firestarter in it. After many restarts I found that a file was left in /etc/network/if-up.d/50firestarter and this file was simply a script trying to restart firestarter. At this point I've commented out the calling line and followed the commented line with exit 0. This removes the error but there's still a link calling the file so, is this a bug or am I missing something? It appears the uninstall/purge wasn't entirely complete.
View 1 Replies
View Related
Jul 23, 2010
I have wireless connection between my router and PC. It is the only computer connected. Sometimes Firestarter blocks ports 1900 and 6771 from 192.168.1.100 IP address and sometimes port 68 from 192.168.1.1 IP. I'm a bit confused because 192.168.1.100 is the IP addres i use to open ports in router and 192.168.1.1 is used to access the router settings..
View 7 Replies
View Related
Sep 26, 2010
i connect to internet with the connection (with Name: DSL Connection 1) that made by myself. now i wanna use the firestarter but i have a problem.
View 5 Replies
View Related
Nov 8, 2010
All I want to do is share my internet connection that comes through the eth0 cable to my wlan0 wiki card. Firestarter seems the convenient tool for doing this. BUT it keeps telling me wlan0 not ready. The card is connected correctly and network-manager does see incoming signals.
View 1 Replies
View Related
Dec 8, 2010
I recently installed the XRDP server on my desktop edition of Ubuntu v10.04 following the simple instructions available here. I did this on two computers. One computer has Firestarter installed while the other does not.
When I use Windows to connect to the Ubuntu box without Firestarter, everything works just fine. However, when I try to connect to the one running Firestarter, I get a pop up showing an error message (see the attached file).
I checked the incoming rules in Firestarter and I don't see a way to add RDP sessions to the list of exceptions. I also tried adding my IP address in the host section but this too didn't help the situation.
View 1 Replies
View Related
Feb 5, 2010
At my home I am using firestarter to connect my XBOX 360 to the internet and it works perfectly, never crashes etc and I get a moderate NAT which I've never experienced any problems in having.
I have my devices set up like this
eth0 - ifconfig eth0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255
XBOX - 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.255 gateway 192.168.2.1
This configuration works perfectly on my router at my house which has the IP of 192.168.0.1
However at my friends house he has a router with the IP adress of 192.168.2.10 or 192.168.2.7*, I don't remember exactly but I'll find out tonight. I have tried changing my IP settings on my xbox and eth0 to no avail. I noticed instantly that the XBOX IP is the same as my friends router. what the new settings would be, or simply changing the router's IP.
However there is also an issue with the DNS servers. I can't find them anywhere on the router or on the router box itself. I heard that I could point it towards my default gateway however.
View 2 Replies
View Related
Apr 21, 2010
I have a system running 9.10 configured with Firestarter acting as a router. We have multiple Xbox 360's on the network. Unless some ports are forwarded, the Xbox has a NAT type of "Moderate". I have been able to set an Xbox with a Static IP and forward the necessary ports for that IP, which allows the Xbox's NAT to become "Open." My question is, how do I do this for multiple Xboxs? If the follow the same procedure for additional Xboxes, only one Xbox at a time can have an "Open" NAT type, and the rest would be "Moderate". The ports the Xbox uses cannot be changed via the Xbox.
View 3 Replies
View Related
Jul 22, 2010
I am trying to set up a computer to act as a firewall/gateway on my network, and am using the Firestarter program to do this. Everything appears to be set up correctly, and I followed the instructions on their website completely, and I get an error message when I try to start the firewall. It says that eth0 (my internal NIC) isn't ready, and to make sure it's active.
View 3 Replies
View Related
Mar 2, 2010
Since yesterday Firestarter has been prompting me that it is blocking external connection attempts as shown in the picture below:I'm not even going to bother covering the IP addresses because I personally don't see why I should care but as you can see, there has been loads of them attempting to connect to ports 3674 - 3675. I ran nmap 127.0.0.1 and it came back as 631 being the only one open. So then I thought maybe lsof -i would mention much more but all it shown was:
@boris:~$ cat meh
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
cupsd 1644 root 5u IPv6 14329 0t0 TCP localhost:ipp (LISTEN)
[code]...
View 1 Replies
View Related
Aug 20, 2009
I have the following machine :
laptop : Dell Inspiron E1505
Wireless : Intel Pro Wireless 3945 (ipw3945-1.2.2 + ipw3945d-1.7.22 + ipw3945-ucode-1.14.2 / eth1)
Printer : HP C4580 Photosmart wireless (hplip-3.9.8)
Ethernet : Broadcom Corporation BCM4401-B0100Base-TX (b44.ko / eth0)
External Modem : Siemens CL-110 ADSL
OS : Fedora 6+11 (currently on fc6)
The external modem is connected via the laptop ethernet and provides the internet connection.
The printer is connected via wireless adhoc to the laptop's IPW3945 wireless card. I use firestarter as firewall. When firestarter is disabled everything works fine. If enabled it blocks my printer. I have tried to open every possible port via firestarter (according to several other threads) with no luck. My printer is set (under system-config-printer) as :
Code:
hp:/net/Photosmart_C4500_series?ip=192.168.2.5
$ netstat -rn .....
View 2 Replies
View Related
Aug 23, 2010
I am a bit new to fedora I have the following scenario in testbed of mobile ad hoc network
pc1 pc2 pc3 pc4
192.168.1.1 192.168.1.2 192.168.1.3 192.168.1.4
Now I have the source as pc1 and pc4 is destination and I want to send data/ping pc4 from pc1 via pc2 and pc3 using firewall firestarter,
View 1 Replies
View Related
Feb 15, 2010
I've been trying to get Rhythmbox to play with my DAAP enabled HPMediaVault server, and have several entries now under "Shared" in RB -
I've looked everywhere, Googled, and looked in Ubuntu forums to no avail.
Am I just overlooking something simple?
I want to remove the non-working entries that I put in the "Shared" list.
View 4 Replies
View Related
Feb 9, 2010
This is more of a question for developers of rhythmbox DAAP support. I am using rhythmbox to remotely access music exported by mt-daapd server. It works fine. But it does not seem to close connections properly. This problem is very severe when you press "prev" button a few times. How to reproduce (this just one way):
1) Start playing a few songs (playlist or an album).
2) press "next" button a few times
3) then press "prev" a few times.
The playback might even pause for many seconds if you are not a LAN. Now check connections opened by Rhythmbox.. (netstat -n | grep 3689 on client). You will notice a lot of connections, and they stay for a very long time.. multiple hours. Let me know if anyone needs more info.
View 1 Replies
View Related
Jan 2, 2010
Has anyone gotten DAAP sharing to work between Itunes 9 and Banshee? I have a Windows Vista, Mac OS X, and Fedora 12 box setup on my network. Both Mac and Visa have itunes 9 running on them, and when opening Banshee the Itunes Library shows under shared music but when I select it; I get the below error:
Unable to connect to music share
* The provided login credentials are invalid (I removed the share password, same issue)
*The login process was canceled
*Too many users are connected (not the case)
* The music is hosted by itunes 7 (hosted by itunes 9)
Is the Banshee DAAP plugin supported with Itunes 9? Are there any work arounds?
View 4 Replies
View Related
May 26, 2011
I downloaded Rhythmbox from the repositories but found that DAAP sharing is missing (it is not in the plugin list). I've searched around a bit and it's supposed to be in there standard. Does anyone know where I can find this plugin and how to add it?
(I'm using OpenSUSE 11.4 with KDE)
View 1 Replies
View Related
Feb 12, 2010
what is the default username and password to access the firefly daap server?
View 1 Replies
View Related
Jul 9, 2011
I've got a small problem with Banshee that I need some help with, if possible. I'm currently using the latest version of Ubuntu 11.04 and it's up to date. The problem i'm having is with Banshee playing music files over my DAAP share. My DAAP server is running Firefly (mt-daapd), and Banshee can see the server and shares just fine. It loads the song list from the server, but when I select a song to play it just sits there. Rhythmbox works just fine, sees the share and plays the songs ok (which is what i've fallen back to for the moment), so I know it's not a hardware or software problem from the sound "system".
Other features of Banshee play just fine, including internet radio stations, internet archives, and importing songs from the server (which makes the song local instead of networked from a single source). Ok, so streaming from the DAAP share isn't working; here's the output from the terninal I started Banshee from:
[-----START-----]
[Info 07:13:23.440] Running Banshee 2.0.0: [Ubuntu 11.04 (linux-gnu, i686) @ 2011-06-28 05:46:57 UTC]
[Info 07:13:28.765] Updating web proxy from GConf
[Info 07:13:28.998] All services are started 4.668005
** (Banshee:2341): DEBUG: SyncDaemon already running, initializing SyncdaemonDaemon object
[Code]...
View 5 Replies
View Related
Sep 29, 2010
I'm using Amarok 2.3.2 on openSUSE 11.3 with KDE 4.4.4r3. How can I enable DAAP sharing of my Music library so that I'm able to access it in Rhythmbox from my Linux Mint 9 desktop?
View 1 Replies
View Related
Jan 24, 2010
For some reason when I try to boot Ubuntu up I get the following error messages:udevd[470]: NAME="%k" is superfluous and breaks kernel supplied names, please remove it from /etc/udev/rules.d/48-ldusb.rules:2One or more of the mounts listed in /etc/fstab cannot yet be mountedAfter the second error message, it says, "Stopping Firestarter..." and it stops there. :
View 9 Replies
View Related
Jan 16, 2010
Firestarter sometimes shows up to a dozen different ip connections for a single webpage that I open. This is for the first webpage I open, not after I have been browsing for awhile so they are not old connections that have not timed out. This just doesn't seem normal to me since other installs I have had of ubuntu have only shown one or two firefox connections at all times.
View 1 Replies
View Related
Feb 17, 2010
I'm trying to set firestarter as a startup application using the gui but it will not run due to permissions problems,?
View 4 Replies
View Related
Apr 27, 2010
I have an Asus 900 laptop that I put Ubuntu 9.10 on.I know it was made by the Chinese, but why are they trying to hack my pc?I currently put FIRESTARTER a linux firewall on board you can go here to get itNow I can see everyone's IP address and find out where they are and who they are!!
View 9 Replies
View Related
Aug 15, 2010
I need to start firestarter at starup, but the application need root credentials, I use "Startup Applications" when I need a program to start upon login, but firestarter need input the su password... how could I get around this?
View 1 Replies
View Related
Sep 15, 2010
I was wondering if firestarter (software firewall) works out of the box or does it need some kind of configuration in order for it to provide protection? Is firestarter even needed with ubuntu?
View 6 Replies
View Related
Mar 8, 2011
im having a bit of a problem with Firestarter, i have Transmission opened and i am downloading a movie but when i check Firestarter i see hundreds and hundreds of Ip's that are blocked, and like 10ip's every second that get blocked.
[Code].....
View 2 Replies
View Related
Mar 25, 2010
So I had my desktop connecting via wireless to my home network. And I had firestarter helping with the firewall, and it was running using the wlan0
But now I have connected that machine by ethernet to the internet and I have taken out the wireless card. So there is no more wlan0 connection.
But now firestarter doesn't recognize my eth0 connection. How do I fix this. Should I just uninstall and reinstall firestarter? I feel that there should be a way to configure it to realize the firewall should be on eth0 now instead of wlan0.
View 9 Replies
View Related
Apr 19, 2010
I am new to Ubuntu and till now I have chosen it to be my favorite distro. I use my laptop in various networks, home, work, school. When I run firestarter the wizard does not give me the option for wireless INTERNET, only ethernet.
View 2 Replies
View Related
Oct 6, 2010
I updated my system with system updates and when i restarted.I couldn't access the internet from my desktop. i got on laptop internet worked just fine..i disabled firestarter and mozilla connected to the internet just fine. I turned firestarter on. and i couldn't reach anything.. What do I have to do to get firestarter to allow me to connect to the internet via firefox
View 3 Replies
View Related
