Ubuntu Networking :: Error "Ndiswrapper (iw_get_scan:1234): Couldn't Allocate Memoery"
Jan 2, 2011
I got rid of windows 7 and installed Ubuntu 10.04. That was a bad move because I got it to work before without too much difficulty. However this time I could not get the wireless to work. I tried the trouble shouting guide here but still keep getting the same error message: ndiswrapper (iw_get_scan:1234): couldn't allocate memoery. I know I have installed ndiswrapper and the windows XP driver correctly. And they used to work in Ubuntu 9 before I changed to Windows 7. I tried google for that error message but it seems nobody had that particular problem. The wireless adapter I am using is airnet AWU154.
View 1 Replies
ADVERTISEMENT
May 6, 2009
I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
View 6 Replies
View Related
Jan 5, 2010
just loaded 9.10 and trying to install the NDIS wrapper so I can use my USB wirless adaptor. Executed the command
sudo apt-get install ndiswrapper-utils-1.9 as read in one of the forums and received the following error:
E: couldn't find package ndiswrapper-utils-1.9
both the tar version and the unzippedversion are on my desktop but I'm not sure they are installed and I don't know what to install. I've clicked every file in every folder most seem to be instructions not what I know as executables.
View 1 Replies
View Related
Oct 24, 2009
Created abt 16.4 gb free space using Disk Management in vista. I read the sticky on installing from the live cd and did accordingly. Whatever Partition i create first (boot or /), it gets done. However, when tryin to create the 2nd partition, i get "Could not allocate requested partitions:Not enough free space on disks." Cant proceed any further.
View 5 Replies
View Related
Dec 18, 2010
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
View 4 Replies
View Related
Aug 2, 2011
I have a desktop environment with Apache2.(If someone asks why desktop to run Apache2, its because the desktop must display a local website)When I update the html files from a windows box it is being copied in a home/user folder.Cron now has to copy the files with r to the localhost area.sudo cp -R home/myself/Downloads/* /var/www/ works fine:The script containing just that one line is in a file in my /home/myself/Documents folder named: copy_site_localhost.Cron entry in turn was created with the command: sudo crontab -e and the entry is:*/10 * * * * /home/myself/Documents/copy_site_localhostThe error in the syslog file in /var/logs is as follows:
.......CRON[1234] (root) CMD (home/myself/Documents?copy_site_localhost)
.......CRON[1236] error (grandchild #1234 failed with exit status126)
.......CRON{1236] info (No MTA installed, disregarding output)
[code]....
View 1 Replies
View Related
Jan 28, 2011
i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.
View 1 Replies
View Related
Jul 10, 2010
I just installed Ubuntu 10.04 64 bit on my mac as a seperate OS, but I can't get my Internet working. It's wireless and Ubuntu isn't seeing any of the wireless networks in the area. I have installed ndiswrapper and tried installing a driver for my network but it didn't work.t=616801 but when typed in this code: "ndiswrapper -i bcmwl5.inf && modprobe ndiswrapper" I got the "No such file or directory at usr sbin ndiswrapper line 219" error
View 2 Replies
View Related
Nov 13, 2009
I use a Dell inspiron 1525, with windows 7 and fedora 8 in dual boot. Ihave broadcom 4310 wireless card to use.. how ever i could not activate my wireless.. so i guess this the right place where i can get a solution to the problem. After installing the ndsiwrapper by yum, i tried to execute the command ndiswrapper -i bcmw15.inf This returns with an error couldn't open bcmw15.inf: No such file or directory at /usr/sbin/ndiswrapper line 219.
View 1 Replies
View Related
Apr 30, 2010
I get errors trying to virtual IPv6 Addresses i a lab environment. It works fine up to 2033 (?) adrressses, but when I try to add more i get "Cannot allocate memory" error:
# ifconfig eth0 add 2001:1b70:8282:2021:18:0:20:1
SIOCSIFADDR: Cannot allocate memory
This is on Ubuntu Server 9.10 (64-bit).
View 6 Replies
View Related
Mar 19, 2010
though method of editing /etc/network/interfaces worked for me i have decided to get gui work.i have installed wicd, i set wep key for connecting to my network. when i'm scanning wicd find my network. but i get error "couldn't obtain ip address". when i dived into logs i found that there is some problem with wpa_supplicant. here is piece of log:
Code:
2010/03/19 21:45:58 :: Connecting to wireless network MY_ESSID
2010/03/19 21:45:59 :: /sbin/dhclient -r eth0
2010/03/19 21:45:59 :: ifconfig eth0 0.0.0.0
2010/03/19 21:45:59 :: /sbin/ip route flush dev eth0
2010/03/19 21:45:59 :: ifconfig eth0 down
[Code]...
View 8 Replies
View Related
Feb 6, 2011
While Apache is off, then everything is OK, but if I start apache server after some time I get messages "Unable to fork: Cannot allocate memory" when trying to do some commands with ssh(dir,rm,top and so on).
P.S. There is free RAM when I get that message.
View 2 Replies
View Related
Nov 23, 2010
When I try to do
[code]...
I've tried the method described here: [URL]... However, I'm still getting the same error.
View 2 Replies
View Related
Jun 27, 2011
i need to write a program to reverse numbers example 2345 --> 5432i wrote this for my program
A=str(input("enter 4-digit #:"))
A1 = A[3:]
A2 = A[2:3]
[code]....
View 2 Replies
View Related
Jul 11, 2010
I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):
Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat
View 5 Replies
View Related
Sep 9, 2010
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
View 2 Replies
View Related
Jul 18, 2010
I just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
View 6 Replies
View Related
May 23, 2010
I installed ndiswrapper and tried adding a driver. Error: module ndiswrapper not found.So I recompiled my kernel, upgrading to 2.6.33.4 (no, I can't see the logical connection either) After a week, I got the new kernel working ( in the interim I reinstalled debian- it didn't survive my first kernel attempt. don't ask), and reinstalled ndiswrapper. Same problem. So I had a stoke of genius: download the source package!! So I did. Lo and behold, a new directory appeared in /usr/src/ : modules. I took a moment to admire my work, then I jumped in.I 'ls'ed to see what was going on, and found a Makefile. so I typed 'make'. First error: kernel source not found. So I entered the Makefile, found the(clearly marked)variable,and changed it to /usr/src/linux-2.6.33.4 , exited, and redid 'make' Second error: no wireless support in kernel. So I went to src/linux-2.6.33.4 and did a make menuconfig- loaded my current, threw in wireless, and exited.
[Code]...
View 1 Replies
View Related
Mar 25, 2010
I have to use ndiswrapper to get my wireless card to work (Cheap D-link usb wireless). I have never had a problem in ubuntu releases with getting it up and going, but in Fedora and now Opensuse I am struggling. I have everything setup with no errors. Ndiswrapper lists my drivers as installed and my hardware present. lsusb also has it listed. but when I modprobe ndiswrapper, I am getting no errors, but I am also not getting wlan0 to show when using iwconfig. I also noticed when modprobed the wireless card's light isn't coming on like ubuntu.
View 8 Replies
View Related
May 18, 2010
My linux box has 3 network adapter. eth0 connects with ISP, eth1 is for staff network, eth2 is for public user. I want to limit the usage of internet bandwidth. for example, the traffic going through eth0, 75% is for staff network, 25% is for public user.In addition, I setup shorewall on it for port forwarding and filtering, but I felt the traffic shaping of shorewall is complex. I don't need the specific TOS, but only the percentage. could you give me some suggestion?Which software or package I should use to achieve this goal?
View 3 Replies
View Related
Apr 19, 2010
I get this error when I run "sudo apt-get install python-software-properties"
Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)
I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.
View 2 Replies
View Related
Jan 9, 2011
I recently had to move to a new machine, everything went well except for one thing. I did fresh installation of LAMP server all with default configs. Every time I'm using PHP script to that invokes include, require or require_once I get the following error:
Code: Fatal error: Allowed memory size of 20971520 bytes exhausted (tried to allocate 7680 bytes) in /var/www/index.php on line 2 index.php file: PHP Code:
<?php include "index.php";?>
icukapi.php file:
PHP Code:
<?php echo "test";?>
My memory_limit in php.ini is set to 20M. I tried to increase that however it didn't quite work. PHP seems to allocate all possible space and return that message every time i try. If somebody has an idea of how to fix it I would be more than grateful. I spend quite a long time searching for an answer however the all things i found suggested increating memory_limit which in this case doesn't work.
View 1 Replies
View Related
Apr 26, 2011
I have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.
View 5 Replies
View Related
Jan 7, 2010
I'm currently using Ndiswrapper for my wireless usb card that uses the RTL8187B Chipset on Ubuntu 8.04. To get myself to connect I have to run "sudo modprobe ndiswrapper" everytime. Is there a way I can connect automatically?
View 9 Replies
View Related
Jan 9, 2010
I have Ubuntu 9.10. My USB WG111v3 Wireless Card uses the rtl8187 driver. This driver is buggy. I would like to use Ndiswrapper instead. How to make it so Ubuntu doesn't load the rtl8187 driver but Ndiswrapper instead?
View 2 Replies
View Related
Sep 18, 2010
So after a quick look around the forums, I haven't seen anything on removing ndiswrapper. What I have done is removed ndiswrapper via synaptic. Now in order to start my wireless card I have to issue:
rmmod ndiswrapper
modprobe ath9k
ifconfig wlan0 up
Basically this is a pain. Does anyone know how to get rid of ndiswrapper completely and set things up to use ath9k automatically?
View 1 Replies
View Related
Jun 18, 2011
I recently installed Ubuntu 11.04 to run a Minecraft Server. Now against better judgement and seeing that it is only for 7 people, I decided to use a wireless usb card to connect to the internet. Well, I was told that I was going to have to install ndiswrapper. I downloaded it on my Mac and used a USB drive to transfer it to my desktop. I then double clicked and extracted. I then did this in the terminal:
Code:
To run a command as administrator (user "root"), use "sudo <command>". See "man sudo_root" for details.
[Code]...
View 2 Replies
View Related
Aug 18, 2009
-bash-3.2# tar -xzvf lzo-2.03.tar.gz
gzip: stdout: Cannot allocate memory
lzo-2.03/
lzo-2.03/src/
[code]....
This is on a VPS with 256mb memory. vmstat and /prov/meminfo both show that over 200mb is free.
View 1 Replies
View Related
Jul 30, 2011
My software sources some how got screwed up. Now when I try to install from software manager or Synaptic, I get error messages. Here is the error messages at the bottom of "sudo apt-get update" :
W: GPG error: http://archive.ubuntu.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: GPG error: http://archive.canonical.com lucid Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
How do I fix this ?
View 3 Replies
View Related
Aug 4, 2011
When I try to play some OpenGL games, I get this error.How can I fix this? My graphics card is Nvidia, and I use the nvidia-current driver.Here's what it says under OpenGL/GLX Information. I don't know if this is the info you need, but oh well.
GLX_EXT_visual_info
GLX_EXT_visual_rating
GLX_SGIX_fbconfig
GLX_SGIX_pbuffer
[code]....
View 3 Replies
View Related
