Networking :: Cannot Connect Wifi Pure Evoke Flow Digital Radio And Media Player To Ubuntu Laptop
Jan 4, 2010
I have a Pure Evoke Flow radio that connect to my wireless router for streaming internet radio, this works fine. It also has the functionality to connect to a hard drive over wifi and play any MP3 files on it and it runs on Linux.
With Windows (sorry) I just click on the folder and make it Shareable, on the Radio I then set it to search for servers and it finds my wife's PC and plays her music.
I have (I believe) set my music directory on Ubuntu 9.10 to be shareable, it downloaded and installed a couple of files including samba and then rebooted. However my Radio cannot see it.
View 25 Replies
ADVERTISEMENT
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
May 3, 2011
With most Linux distributions, I can only get a short range to connect my laptop to the wifi. However, when using Ubuntu 10.10, this issue seemed to cure itself and I was able to use wifi in my room. I recently installed Ubuntu 11.04, but suddenly my wifi issues have come back again - I can only connect if I am near my router.
I am using an Intel Wifi 5100. I should also note I can get a wifi connection if I boot into Windows 7.
View 9 Replies
View Related
Nov 9, 2010
I recently installed Ubuntu 10.04 and I would use my tv as desktop, in wireless connection with my notebook. The problem is that on the page url I haven't found the software for Linux.
View 3 Replies
View Related
Oct 25, 2010
I'm using Ubuntu 10.04 64 bit Ubuntu with a wired nic card connected straight to the cable modem. When I try going to Free Internet Radio - SHOUTcast Radio - Thousands of Free Online Radio Stations I get an error message that it is unable to connect. I tried it with Firefox 3.6.11 and Opera 10.06 and neither one will make a connection to Shoutcast web page.
I don't have it blocked with iptables and I don't think the Ad Block plug-in is a factor as Opera won't connect either. But if I try it with IE in XP running in VirtualBox on the same Ubuntu system it will connect to the web page! Is it something with my Ubuntu system or is Shoutcast blocking access to Linux users?
View 1 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Oct 24, 2010
After having scoured the internet and the forums for advice, I am still not able to connect via Wireless, which is being controlled by Network Manager.The following is info I obtained from running a script that I obtained reading these forums:
* Hostname: linux-8qpz.site
* Run date and time: Sun Oct 24 10:12:58 EDT 2010
---------------------------------------------------
[code]...
View 3 Replies
View Related
Mar 24, 2011
I am having problems troubleshooting my pure-ftpd setup. I am always getting a 530 authentication error. I attempted to correct the problem by doing the following:
# pure-pw mkdb
# ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/PureDB
# gedit /etc/pure-ftpd/conf/PAMAuthentication
[code]....
This create a new error. 421 Unable to read the indexed puredb file (or old format detected) - Try pure-pw mkdb I am getting a feeling this is getting from bad to worse. I attempted to remove pure-ftpd and pureadmin to start over again. However, it appears I cannot remove everything. I attempted the following:
apt-get remove pure-ftpd pureadmin I am not sure what this really does because I can still see the folder /etc/pure-ftpd and I cannot remove it. I could not use rm /etc/pure-ftpd because the system said it was not empty. I also tried sudo aptitude remove pure-ftpd pureadmin . Again I cannot completely remove the folder. How do I completely remove pure-ftpd and pure admin and all databases, files and folders so I have a fresh system ready to start the install again?
View 1 Replies
View Related
Apr 13, 2011
Ubuntu10.10.i want a media player with all media codecs.it should able to play all formats of videos and audios so please suggest me a media player.(i used km player in windows i want a media player like that)
View 1 Replies
View Related
Jan 18, 2010
I've trolled the forums for about 30 mins or so already looking this up, but can't seem to find any solutions. Most threads seem to end with either a "report to launchpad" or they just end without resolution. So in case I've missed a solved thread:
Plugging my Kodak C503 in gives inability to mount due to lock issues, the infamous -60 lockout. However, I get TWO icons in metacity, neither are mounted/will mount. Turning the cam off removes both, and I can't get down to only one. Not sure if this is because it's reading the camera's internal memory + my SD card.
So, I pulled the SD card out, and jacked it into my card reader in my lappy. no dice. In fact, none of my SD cards work; leading me to believe I need to find drivers for it.
Notes: (1)It's a Pavillion ZD7000 (2)nothing pops up in fdisk (3)I really don't want to load up windows
View 2 Replies
View Related
Oct 27, 2010
Got to say first off, I have LOVED the 10.10 release, absolutely adore it. Only problem that I have noticed thus far, is that when I use any of the non standard buttons, it causes my left clicking to stop working.
It's not a big deal but something that does come in handy every once in a while =/
View 3 Replies
View Related
Aug 8, 2011
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies
View Related
Oct 20, 2010
Crystal Player has one very good playback speed troubleshooting feature - it uses large buffer of decoded frames (about 50% of RAM). Is there any player with such features in ubuntu?
View 4 Replies
View Related
Aug 1, 2011
When playing coyright protected DVD's in Ubuntu 10.10: the following errors occur:Movie Player Error message:Error occured Could not read from resourceVLC media Player Error essage:Playback failure:DVDRead could not read block 0.Non copyright protected DVD's play fine
View 2 Replies
View Related
Feb 9, 2011
I have set up pure-authd and pure-ftpd. They are both running, I have created the socket etc.
In my authentication module (a php script) for testing purposes I have done a vardump in to a file, and have realised that pure-authd is not passing on any variables (username, password of the current person trying to log in via ftp) to the PHP script.
I am sure the authentication module is working (have tested it vigorously on the command line), but after 10 hours wondering why it wouldnt work and messing about with the script, I have realised that the variables were never even getting in to the script in the first place!
I am running the processes such as this:
Everything seems as if it is working other than this. For instance, when testing the setup with a very basic auth module which doesnt require a username or password (the basic module just passes "auth_ok:1" to pure-ftpd and the user is then logged in), I can log in to the FTP server fine.
But like I say, a vardump ($argv) on my proper PHP authentication script would suggest that no username or password are being passed to it.
View 1 Replies
View Related
May 3, 2011
I can not connect to wifi networks, i can see them but not connect.
My wifi device is:
View 9 Replies
View Related
Jun 3, 2010
I recently installed the VLC media player. Now how do I make this my default media player? When I click on a video, Totem Movie Player still launches.
View 2 Replies
View Related
May 26, 2011
in software.opensuse.org site if we serch for a software the result will be like the following
vlc
KDE:Unstablelayground/openSUSE_11.4_KDE_Distro_Factory This is the stripped version of the VLC media Player. VLC media player is a highly portable multimedia player for various audio and video
[more]
1-Click Install
Manual Package Download
Go to OBS Project
i586 vlc-1.1.6.99-1.11.i586.rpm
src vlc-1.1.6.99-1.11.src.rpm
x86_64 vlc-1.1.6.99-1.11.x86_64.rpm
if i like to keep the setup(rpm) of the software which i should chose the above?
View 9 Replies
View Related
Jun 12, 2010
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies
View Related
Aug 27, 2010
Iam using opensuse 11.1. I want to know which is the best player that can be used in suse, which should support all codecs. I have tried totem player, xine, kaffeine, Noautun etc. But none of them is good. I have tried to install vlc player, but it shows a lot of dependencies too..it was not successful.
View 2 Replies
View Related
Feb 17, 2010
I occasionally stay at hotels where I get free wired internet but not wifi, I'd like to use my laptop as an access point so that I can have internet on my Ipod Touch. I know it's possible because after trying unsuccessfully in Ubuntu 9.04 a few times I decided to try it with windows vista and it took me a matter of seconds and both the laptop and ipod touch were surfing the internet. I'd prefer not to boot into windows just for this.
In ubuntu when I create a new wireless network, network manager shows that I'm connected to both the autoeth0 and the wireless network I created but neither computer has internet access.
View 2 Replies
View Related
Mar 12, 2010
I have a linksys networkrouter WiFi a laptop Windows Vista an a Laptop Ubuntu.On the vista machine i have 54mb/s on the ubuntu i have sometimes 1 and sometimes 25 mb/s When it was a Windows machine it was also 54mb/s.So y question what can i doo to speed it up ?
Some test results:
Windows:
Download 1368.2 kbyte/sec
Upload 86 kbyte/sec
Connection 631 conn/min[code]...
View 1 Replies
View Related
Apr 16, 2011
I have a Thomson TG782T, I live with 2 people, I don't want one of them using my internet as i never see any money for it, I don't want to change the WPA, Is there anyway i can just block the one laptop?
View 9 Replies
View Related
Feb 9, 2010
connect your player to Ubuntu and with some magic Ubuntu changes it to a camera But now my 1 gig Philips Shoqbox can not play any music anymore.If i connect it in Xp it is also changed in a digital camera and i am not able to put any music file on it.In Ubuntu i can but the player doesnt see any of the songs.In Xp i cant format the player and can i do it in Ubuntu or Mandriva?Tomorrow i go install a new distro and is it a option to connect the device before i start the installation and format it then?And do i need to format it to fat32?Or is there a simple way to do it in a terminal?
View 1 Replies
View Related
Aug 24, 2010
I recently tried to add a radio station in Music Player only to get a message from the site (Classic FM - UK) that "You appear to be using Linux, please get MPlayer1.0rc3)." So I went and downloaded the install zip file and extracted it to the desktop. Now, in Windows it's easy - there is always a file called setup.exe/other standard name and suffix. But no matter how long I look into this folder from MPlayer I just simply don't know where the exec file is and neither do I ever seem to find installing ANY third party linux stuff on Ubuntu straightforward.
if one of you could take a look at this zip from here: [URL] This is now the sixth or seventh occasion on which I've found users of Linux assuming that everyone under the sun understands what their instructions mean for noobs. I do like Ubuntu but there is a certain attitude among long-term users which is not particularly helpful and which I am certain prevents new people from taking it up; namely that the prime misconception remains that it's assumed "open a terminal and sudo to nautilus" etc is going to make any sense to someone who has just stopped using Windows after 20 years.
So far, I love the start up speed, the manoeuvrability, the customisation of Linux. But I don't like the chore involved in simple functions like the above. Hell, I don't even know if MPlayer1.0rc3 is the same as Music Player! Why? Because, as you'll see from the above link, the makers can't be bothered to tell you anything other than to speak in Linux-Speak. I'm having the exact same issues with getting a Wacom tablet to work - ten million pages of Linux-speak and not a single straight-forward instruction. It's all devrules and sudos and hidden files.... It is sorely tempting to just give up and go back to the evil monster that is Microsoft.
View 3 Replies
View Related
Mar 20, 2011
I am absolute beginner with ubuntu. I have been trying to download and install flash player with little success. I have downloaded it and according to system it is installed. However when I am on the internet and want to listen to the radio I get a message saying I need to install flash player.
View 9 Replies
View Related
Feb 11, 2010
I have a laptop with Ubuntu 9.10. And I want to connect it to Internet using wifi. Also I have desktop with Ubuntu 9.10 (another desktop with Win XP, but for some day it will run under Ubuntu too ). I want one of this these desktops to share wifi with laptop. I think that a wifi adapter is a way to solve this problem. I found a D-Link dwa-110. i've read on forums that someone successfully installed drivers [URL]. Is there any other ways to share wifi with laptop (only 1 laptop needs to be shared with)? Had someone connected desktop with D-Link dwa-110 and laptop (as I want)? Both desktops connected to Internet via wire.
View 5 Replies
View Related
May 1, 2010
I'm having a really strange problem with my wifi connection on my laptop. The ethernet connection works fine and so does the wifi connection - as long as I sit within one meters range from my router! As soon as I take the laptop further away the connection drops. The router is still being found by network-manager and the signal is just below 100%, but when I try to establish a connection it fails.
I'm sitting here on a fresh Ubuntu 10.04 install, and I had exactly the same problem with 9.10. That time I went through a lot of different procedures, and in some strange way the problem was solved. I haven't been that lucky this time though, I've tried reinstalling network-manager, using ndiswrapper, installing the wireless backports package, tried all kinds of drivers.. nothing works.
There shouldn't be any problem with the connection itself; I've had a perfect connection downstairs but now I can't even connect if I stand two metres from the router! Has anyone experienced anything like this and managed to fix it? My wireless card is Atheros AR2413. This is an example from daemon.log
Quote:
Apr 30 00:45:51 petter-laptop NetworkManager: <info> Activation (wlan0) starting connection 'Auto Wester'
Apr 30 00:45:51 petter-laptop NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
[Code]...
View 9 Replies
View Related
May 27, 2010
Running 9.10 Ubuntu on my laptop. It connects fine to regular access poitns, but for some reason it won't connect to my android wifi adhoc sharing. I have it as dual boot with Windows and windows connects to it perfectly. From Ubuntu 9.10 it tries to connect... then just disconnects. Would be killer to be able to use it with my adhoc wifi sharing! I prefer my Ubuntu boot, rather than my windows one
View 6 Replies
View Related
Jan 6, 2011
I have a Dell Studio 1737 running Ubuntu 10.04 LTS.My WiFi was working fine a few days ago until I tried to boot into another mode that allows me to boot into my other Ubuntu 10.04 or Windows Vista.I booted into that Ubuntu, which I thought had been overwritten when I was having problems and installed the one I am currently using.I shut down since it didn't have anything of any use to me at the moment, and I booted back into this current Ubuntu.Now, whenever I shut my laptop screen and open it back up to login, the WiFi is disconnected.(I was also having this problem on the Ubuntu that I booted into earlier, but that WiFi did this from the start on that one.)
View 4 Replies
View Related
