Ubuntu Networking :: Add The Connection Manually As If It Were Hidded?
Dec 11, 2010
I am attempting to connect to my wireless router. When I click on NetworkManager It says Wireless: Disconnected. I then tried to add the connection manually as if it were hidded (even though it should broadcast SSID).
I have tried with WPA2 and with no security what so-ever. It hangs, tries to connect for a minute or so, then fails. I have the Alfa AWUS036nh USB card. Here are my iwconfig and ifconfig ouputs:
[Code]...
View 9 Replies
ADVERTISEMENT
Jan 28, 2011
OS: Maverick Ethernet driver: tested with sky2 an sk98lin This has been driving me crazy for the last few months: if I unplug ethernet cable while my laptop is on reconnecting it sometimes does not bring the connection back.
And once ethernet is gone nothing that I try seems to consistently bring it back. Rebooting, disabling/enabling the driver, disabling/enabling NIC in BIOS, changing driver from sky2 to sk98lin, deleting connection from Network Manager, resetting the router - nothing helps. It seems to come back randomly a few weeks later. Once I used live Ubuntu on a USB stick and ethernet came back not only on a live distro but then when I rebooted also on my main OS. But when I tried that trick next time ethernet was missing in the live distro as well.
Also once I was able to revive ethernet but compiling sk98lin driver, blacklisting sky2 and rebooting. Of course next time doing the same routine did not help. The thing is - ethernet works fine with either sky2 or sk98lin and I can unplug the cable and plug it back in most of the time without any issues. But then every so often - bang and I'm stuck with only wireless until ethernet suddenly starts working again.
View 1 Replies
View Related
Feb 21, 2011
when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 10 Replies
View Related
Aug 3, 2010
I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.
View 4 Replies
View Related
Aug 9, 2015
My network configuration is in a weird situation, that I always need to run dhclient manually each time after a network connection is established. When my computer connects to a router, sometimes it won't get a valid IP, and it uses an automatically generated fake Internet IP. In this situation, it won't connect to the Internet at all. Sometimes it get a valid local network IP, but still cannot connect to WAN, and could only connect to my router's address (both through ping and through router's management webpage). In both situation, it can be solved by a simple dhclient run.
This is my /etc/network/interfaces file:
Code: Select all# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
iface wlan0 inet dhcp
and this is my /etc/NetworkManager/NetworkManager.conf:
Code: Select all[main]
plugins=ifupdown,keyfile
dhcp=dhclient
#no-auto-default=FE:50:52:BE:46:4C,
View 3 Replies
View Related
Jun 9, 2010
I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues.
The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again.
How to force all TCP connections to resend data without delays in GNU/Linux?
View 2 Replies
View Related
Feb 1, 2011
I am trying to connect to the net wirelessly using Slax off my USB stick. I did the best I could using the wireless configure tool but Firefox will not surf - no connection. The configure tool shows that I am 'partly' connected in that it shows signal strength in green but I noticed that there is no entry for IP address. Am I suppose to know this and enter it? In LMDE, I see the IP as 192.168.2.10 and other addresses. Do I need to enter this stuff?
View 5 Replies
View Related
Aug 11, 2011
Ubuntu 10.04. Each time I boot or reboot,I have to manually force a DHCP request (dhclient). It always gets an IP without problems at that point, but not sure why it isn't grabbing one automatically. I also noticed right when I hit the desktop, it usually shows the Ethernet is disconnected, but then appears to connect each time without problems as well.It's not annoying enough to start ripping the guts out.
View 2 Replies
View Related
May 20, 2010
When in XUBUNTU i click the picture of the 2 pcs indicating a network and choose "connect to hidden wireless network", put in the information.All this works nicely. When i reboot it's saved my config so i choose it to connect again but the "connect" button is disabled so i have to config it all over again and then it works. How do i get it to just connect to the network on login?
View 3 Replies
View Related
Aug 13, 2011
I was wondering if there is a way to manually patch Aircrack -ng with 'airodump-ng-channel-handling-broken-fix.patch' without installing compact wireless package, because I end up with nonfunctional network when I compile compact wireless package. If possible where to paste that patch?
View 3 Replies
View Related
Feb 24, 2010
Long-time linux user, new to Ubuntu (mainly a gentoo user). I need to get tor and privoxy up and running for a less computer-capable user. I installed Tor and Privoxy, configured them (apparently correctly) and they both appear to work just fine when I start them manually from their init scripts:
sudo /etc/init.d/tor start
sudo /etc/init.d/privoxy start
However, I cannot seem to get privoxy to start up properly when the machine boots. Tor starts up and waits patiently, but privoxy is dying or getting killed for some reason I can't understand, and on Ubuntu, have no idea how to diagnose. There's no privoxy process after booting, and the init.d script reports status: not running. I have the startup scripts for both Tor and Privoxy linked to in all the relevant runlevels. I played with the order thinking it might be a dependency thing. Hell, I even put a line in rc.local to try and force it to go. But no matter what I do, I can't seem to get the privoxy service to start for me any way but by manually typing 'sudo /etc/init.d/privoxy start' in a terminal, after logging in.
1. Help me get privoxy to auto-start during init
2. OR Help me figure out how to figure out how to get privoxy to auto-start during init. On Gentoo, all of the init scripts are listed on the screen during init as they run, and you can even run through them interactively by pressing I during startup. I have no idea how to do this on Ubuntu. I modified the kernel line to remove the splash screen, but the information Ubuntu puts on the screen during init is quite haphazard. How do I figure out what's going wrong with the privoxy init script?
View 1 Replies
View Related
Feb 25, 2010
I am having trouble adding additional search domains to ubuntu. I can add them to resolve.conf, but networkmanager will keep overwriting it. Is there somewhere else I can add the search domains?
View 9 Replies
View Related
May 30, 2011
I have wired connection Ethernet (eth0) and 3G connection GSM (ttyUSB0). Firefox uses eth0, but sometimes, I want Firefox to use ttyUSB0. How could I do that?
View 6 Replies
View Related
Jul 20, 2011
how do you manually reassign a wireless bridge in xubuntu 10.04.. Or basically configure it without having to do so through the installation process.. Hopefully there are commands for it.
View 1 Replies
View Related
May 14, 2009
I have a Laptop running Fedora Core 10 (64 bit). I recently have fallen in love with window managers (openbox to be precise); the Problem is, when in these window managers, I cannot connect to wireless APs. I've tried restarting the network manager, but alas it has no effect. So, I'm left with terminal commands (YAY!!! I love any chance to use those.) so is there a command that I need to use to connect manually?
View 6 Replies
View Related
Sep 22, 2010
I manually reset my router to defaults. Then I changed my router default password, SSID, passphrase, and disabled remote management. I used:
WPA-PSK [TKIP] + WPA2-PSK [AES]
security on the router. When attempting to connect, I use the "WPA & WPA2 Personal" option. This is really strange. I can see the SSID on both my laptops, but I can only connect with one now.
View 9 Replies
View Related
Feb 24, 2011
I'm in a bit of a pickle. I've installed Xubuntu on an old Compag laptop that doesn't have any ethernet or wireless built in. It does have a 3com pcmia wireless card, however.
lspci lists it as 3crwe154g72, and I'm hoping that enabling the restricted drivers will get the right firmware and driver for this card. However, with no internet access, I can't do this!
how or where I can download the required files on a working machine and stick them on a usb stick, or something, to get this working?
View 9 Replies
View Related
Sep 8, 2009
I am trying to remember the procedure used to determine the ip address range when given a network address and its subnet mask. Does anyone have any documentation on the steps that are done to accomplish this?
View 6 Replies
View Related
Feb 17, 2010
I have set up a home network using a modem/router, which my devices connect to via ethernet and wireless. I have got it working but i'm still not happy (stick with me...)!
I have settings configured so as to utilise DHCP, so IP addresses for the different machines are automatically assigned by the modem/router (as i understand it). I then obtained these auto-assigned IPs by running ifconfig on each device. I tested connections between the devices by pinging each other using these IPs (ie ping 192.168.2.2).
BUT I want to be able to use hostnames (ie ping dandelion) instead, and the only way I can make this work is to add hosts and corresponding IPs into the /etc/hosts file.
I have made it work in this way, but doesn't this method defeat the idea of DHCP, as I will now presumably have to manually maintain the /etc/hosts files on each device.
View 4 Replies
View Related
Aug 28, 2010
I'm trying to join a wireles lab that I've setup with WEP encryption, but I'm unable to join. (I've tried on two different distros: ubuntu, and backtrack) same result.
here are the commands:
Code:
ifconfig wlan0 down
iwconfig wlan0 mode managed
iwconfig wlan0 essid MYNET
iwconfig wlan0 key XXXXXXXX
iwconfig wlan0 channel 3
dhclient wlan0
tries to contact dhcp but none responde to request, and when I do iwconfig, it shows as not associated
View 5 Replies
View Related
Aug 29, 2010
I'm running Lucid and and trying to get Samba set up to allow sharing files on my network. My problem is that my Windows laptop (Win7) can't see the Linux PC when I click on Network. It only shows my own laptop and my roommate's Vista laptop. However, if I manually connect to the computer (\serenity) it works just fine.
Right now I'm simply using the smb.conf that comes with the package and adding my share info.
The relevant section is:
Code:
View 2 Replies
View Related
Jun 20, 2011
I am new to UBUNTU. I installed the latest one alongside windows 7. I am having problem with the internet connectivity. I configured the static ip settings right I guess. Edited the Auto eth1 and assigned ipv4 settings manually and entered everything correctly.
Address 192.168.xx.xx
Netmask 255.255.255.0
Gateway 192.168.xx.xxx
DNS Server xxx.xxx.xx.x, xxx.xxx.xx.x
Do I have to put MAC Address as well? Which is addressed as 'Network address' in Windows where I put this MAC. I have on board Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20) Network adapter. Do I have to install the driver?
View 3 Replies
View Related
Mar 12, 2009
Does anyone havea good tutorial on Fedora's network scripts, how to edit them, in what order they are called, etc. What I want to do seems simple, but something in the bootup keeps changing it. Right now, I have an image of Fedora Core 7 created in a server with 2 Ethernet cards. I need to specify static IP addresses for each card. Thats simple, and I did that. Now, heres the tricky part, I need to be able to clone this image and place it onto other exact duplicates of the hardware, and have all of the settings stay the same.
What happens here, is that eth0 and eth1 are stored somewhere as devices, and upon boot on a different machine, the Fedora will mount new network cards(different MAC addresses) as eth1 and eth2. It then mvoes my ifcfg-eth0/1 to a backup, and creates two brand new network setting's files, which initialize to DHCP. This creates an issue, becuase these machines do not have monitors nor keyboards attached, nor is their a DHCP server, so its a pain when I swap the machine out, to have to go in with a keyboard/mouse/monitor and reconfigure the network settings before I can connect to it over the LAN.
So does anyone have any advice on how to do this? No matter what i tried, booting the image in a new PC caused Fedora to create two new devices and create brand new network settigns for them, both initialized to DHCP. Hell, I wouldn't care if it created brand new devices, if it would initialize them to static IP addresses that I am expecting.
View 1 Replies
View Related
Jan 11, 2009
I have been dist hunting ever since I bought my new desktop in Sept 08. some live cd or even install cd work or don't-- but I have learned some workarounds i.e. pci=nomsi at boot for example. Problem I have now is I have wired DSL (modem only) and need to manually connect. I can install tkpppoe running ./go-gui command but everytime I do I can send out packets but not ever recieving (correct me if I have this backwards). in other words activity is showing upload but not on downloads and can't ping either ip or domain or browse. been trying to find out what's going on I think it may have to do with the eth0 should not pull up an IP at boot which seems to be 192.147.x.x or like that according to ifconfig -a Otherwords, when I covert my modem to a router every is fine but manually connecting with PPPoE software that's another story. I would go with the router mode but the Westell model I currently have sucks with it's firewall. I usually go with a software based firewall. call me old skool lol. Need some advice.. I miss my journey with linux Even though I have Vista Premium solid as a rock--- I miss the special customizations only nix can provide and better security.
View 1 Replies
View Related
Apr 3, 2011
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
View 3 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jul 28, 2010
I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?
Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?
View 4 Replies
View Related
Jun 11, 2011
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
View 1 Replies
View Related
Dec 13, 2008
I know this has been covered in many threads before, but I'm stuck not finding my exact situation or an answer. I'm a newbie using a Debian Linux machine as the client and Windows XP machine as the server. I have successfully mounted the XP Network drive on the Linux machine using commands from the root terminal:
mount -t smbfs -o username="Windows Username",password=windowspassword //XPcomputername/folder /mountpoint/
However when I put the command in the ect/fstab file as suggested in several posts, I don't get any result on boot up. I.e. I can't get the network drive to mount on start up, I always have to manually mount it from the root terminal.
View 7 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
