When in XUBUNTU i click the picture of the 2 pcs indicating a network and choose "connect to hidden wireless network", put in the information.All this works nicely. When i reboot it's saved my config so i choose it to connect again but the "connect" button is disabled so i have to config it all over again and then it works. How do i get it to just connect to the network on login?
View 3 Repliesthe only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
I know this has been covered in many threads before, but I'm stuck not finding my exact situation or an answer. I'm a newbie using a Debian Linux machine as the client and Windows XP machine as the server. I have successfully mounted the XP Network drive on the Linux machine using commands from the root terminal:
mount -t smbfs -o username="Windows Username",password=windowspassword //XPcomputername/folder /mountpoint/
However when I put the command in the ect/fstab file as suggested in several posts, I don't get any result on boot up. I.e. I can't get the network drive to mount on start up, I always have to manually mount it from the root terminal.
i am always using the latest version of ubuntu,but my main board of my acer5520g broke down under 9.10 last month,the acer company changed my main board and i installed 8.04-i386 LST for safety. but i find the wireless card does not work, i search the google for help,it seems i should install madwifi,but i found no valid download,after a lot of attempts i surrender. SO i put up this question i need a driver for my wireless card (notebook type acer5520g ,wireless card AR 5B91(detected under windows (though i am a big fan of linux and a supporter,i am using two systems and waiting for the 10.04 LST to save me from virus braced windows)
i even can not detect the wireless card under ubuntu 8.04 but it works ok in 9.04 and 9.10 after the installation.
I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.
View 4 Replies View RelatedI just installed the 10.04 on my laptop a compaq 6510b that was was running xp. Ubuntu cant seem to connect to the internet unless i have it hooked up via ethernet cable but the wifi recognizes my network. in windows i use to log in via the wirless network to my boardband connection.
View 3 Replies View RelatedAfter upgrading to Ubuntu 10.10, I've had difficulties with my wireless connection. It will work for a few hours just fine, then suddenly disconnect and try to ask for my password several times before giving up. It's not the network--another computer on a different OS is having no such problems. Also, my wired ethernet connection works with absolutely no problem.
View 1 Replies View RelatedIm using Ubuntu netbook remix on my wife's hp mini. Ever since I switched my router out this netbook will connect to my wireless network, then show a disconnected icon, yet the internet still seems to work. I've searched around and seen that other people have had this issue but I haven't seen anything on how to resolve it.
View 3 Replies View Relatedjust joined the forum so I am a little lost. I am trying to get my wifi to work on an HP Pavilion tx 1115nr (tx1000 series). I am using Ubuntu 10.04 desktop, my network card is BCM4311 rev1.I have read many threads and tried about everything, but I am so close. I can load bcmwl-kernel-source from the software center, restart and my wifi works for that startup. If I restart my computer again, it no longer works. I can then remove bcmwl-kernel-source and reinstall it and it works just once again.I have blacklisted b43 and ssblsmod reveals that these modules are missing after restart when wifi doesn't work:
arc4
lib80211
lib80211_crypt_tkip
[code]....
I am running 64-bit 9.10 on a Acer Aspire 1810T. I can connect to the internet via both wifi and the Novatel U998 modem. I have a PPTP VPN that works correctly via wifi, but does not work via the modem. The obvious problem would be that the ISP is doing something... but I'm dual booting Windows 7, and the ISP's Windows based software is able to connect to the VPN without issue.
I'm running VMWare player to be able to access my required Windows apps, so I'm almost in a position to dump MS if I can get this VPN issue resolved.
Wifi Works, but No internet When I'm directly connected to the Wifi router, via LAN cable, I have internet (this is how I'm posting now) I have a desktop computer, this is also the same problem. Because of this it hasn't updated to 10.04 yet. Its still at the version previous (9.??). Might be relevant. This problem began when my wife's Mac had an update that killed her Wifi access, and we had to reset the Wifi Router. She didn't change anything, we just re-inputed all the data as before (passwords, ID). Since then I can't access my internet even if I can connect to the wifi.
Other Observations In the office, my Laptop's ubuntu side has no problems with accessing Internet through the wifi. My Windows side is unaffected (both Desktop and Laptop). One time I can connect, but when that happened on that same day she can't. Possibly a fluke or coincidence. I read the post of a similar matter, where the person's Empathy still works. when I tried check if that was the case with me, after getting my Empathy to work it began to work again. But this hasn't worked in a succeeding attempt. Below is my system information if it may be relevant.
[Code].....
HPG62-144DX notebook, Windows 7 and considering Ubuntu. I installed 10.10 and tried to get my wifi running but that wouldn't work. I had a connection only sometimes and it broke up after 5 minutes. Once I got a webpage but annoyingly slooow. Got the advice to update drivers and stuff. But the wifi connection is the only one I have...
Went back to 10.4 32-bit. Booted from CD and will keep it that way until this is sorted out. Now I see my wifi hotspots directly and I have no problem to establish a connection. The icon shows 3 bars quality. Network Tools says: Wlan1 = Realtek, Transmitted bytes xxx Received bytes yyy, no errors, link speed = 1Mbps, State = active. Looks good!
The only minor thing here is that enabling/disabling my internal Atheros antanna also enables/disables my Alfa USB Wifi adapter (based on Realtek 8187) but who cares. A bigger problem is: when I start Firefox it doesn't come up with a webpage. It just keeps on saying: "loading". At the bottom of the screen it keeps saying "Looking up" for ages. Nothing further.
I have installed and un-installed 3 different versions of Ubuntu. My fourth is a re-install of v9.10. During all these installs I have had difficulty getting my wifi to work. During my last install I left the ISO in the drive by mistake so when the system rebooted it loaded from the disc in demo.... This was interesting because in the demo the program manager showed 2 drives for wireless, 1 Broadcom STA and 2 Broadcom b43xx. I tried loading the STA and it worked! (sorry it could have been the b43xx, for the time being it's insignificant) Upon my excitement I restarted the computer and removed the disk went to my Ubuntu set up and ...what the Broadcom choices weren't there Why?
Now I am running Win 7 Home 32bit on my main drive and have Ubuntu loaded on its own drive. I have a Netgear WN311b wireless N card installed. Again my confusion is why it worked in demo (off the cd) but doesn't from full install. I read on the web to try inserting my supplied disc from Netgear and then search program manager. It now showed the two for-mentioned Broadcom programs, but this time wouldn't install them. On the b43 I got an error message and on the STA it searched extracting and loading this continued for a 1/2 hour with no progression. I couldn't close the PM or the extracting and loading box, so I had to restart the computer.
I recently bought a new wireless router (Cisco E1000) to use in my house. The E1000 supports mixed-mode 802.11n/g/b, which is what I have enabled. It is the first 802.11n router I've had. My netbook (an HP/Compaq Mini 110) only supports b/g. When connected to this new router, I can only see my status as root. NetworkManager shows a little red exclamation point, and 'iwconfig' shows nothing. It's missing in the 'iwlist scanning' list. Even still, I'm connected and can do everything just fine. However, everything shows up fine when I run 'sudo iwconfig' or 'sudo iwlist scanning'. These have always worked as a standard user before.
View 1 Replies View RelatedThe problem I have is when I install 10.10 I get no wired connection my wifi works great, just no wired connection. I don't have WiFi where I am right now. It works fine when I run off the dvd , but when I install it i get nothing. I have tried static ip, reinstalling, reinstalling drivers. Don't know what else to do. I have a Dell Inspiron 1720. The ethernet is a broadcom 440x.
View 9 Replies View RelatedToday I got my laptop back after its motherboard was replaced (soundcard failure) and I am having problems connecting to the internet. Connection to the wifi network is succesful, but Pidgin is not connecting ("SSL Connection Failed") and I can't view any webpages in Firefox. I loaded up Win7 and everything worked fine, connecting to the same wifi network and using the same proxy settings ("No Proxy").
View 2 Replies View RelatedI was uninstalling some programs through the package manager, then restarted. When my netbook turned back on, I had no internet connection and the WiFi icon wasn't showing in the notification area as it usually does either. Says the card is functioning properly and everything. Other devices can connect to the WiFi.I'm kind of new to Ubuntu and searched around a bit, but am at a loss. HP Mini 110Ubuntu 10.10Broadcom BCM4313Edit: Quote:$ sudo ifconfig -s
View 3 Replies View RelatedI have an Asus EEEpc 1000H netbook with both Ubuntu and WinXp. I just updated from Ubuntu 9.1 to 10.04 and I can no longer connect to my home WiFi!
I have a Netgear router and the network is WPA-PSK password protected. All other devices can perfectly connect. The netbook can under WinXp and could with Ubuntu 9.1. Now, with the 10.04, it keeps asking for the password but never connects. Obviously I triple checked the password and there's no chance of a mistype error.
I have a USB WiFi adapter that my Ubuntu desktop install (10.10) automatically detects, and it works great. I just used the alternate installer to set up an old box as a server, and it doesn't install the driver for the adapter. lsusb finds the adapter, but I don't get a wlan* listed in /dev/. how I can determine what module(s) are used to run this adapter on the desktop so I can load them on the older box? Or is there some package I should install from the CD to help auto-detect the adapter?
View 8 Replies View RelatedI have a brand new ASUS EEE PC 900HA with Ubuntu 9.10 installed on it. The wireless hasn't worked yet but the ethernet is fine. I've been browsing the forums for hours to find a fix but now I've installed/queried/removed so many things I'm totally confused.
lspci -v gives me this
Code:
01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)
Subsystem: ASUSTeK Computer Inc. Device 8324
Flags: bus master, fast devsel, latency 0, IRQ 27
[code]....
I have written a simple backup script, and added it to CronTab, but it doesnt execute at all. Here is my script: [URL]...And my CronTab entry: 0 */2 * * * root /home/server/Scripts/backup.sh
View 6 Replies View RelatedI have a PGP script that for whatever reason if I let linux's cron run it automatically, it sends out the final email with attachment with a blank file. If I come in and run in manually everything works fine and the file is populated in the file. So the only real difference is that i'm running it manually through cron, rather than letting cron run it at a set time.Below is a sumary of my script.
Code:
#! /bin/bash
#PGP Decryption Bash Script
[code]...
One of my script don't execute itself using crontab although it works manually.
=> /var/log/cron
/var/log/cron show these 2 lignes at sheduled time
May 26 09:59:01 COMPUTER crond[26439]: (root) CMD (/usr/local/bin/script)
[code]....
I use crontab to execute a bash script every minute and the output is redirected to a log file.In that bash script there is a screen command to start a screen session.When I execute the script manually it works perfect, but with crontab, the screen command is not executed, but the echo's are. Because they are written in the log file...Here's my script:Script removed for violation of LQ Ruleso the script runs perfect when I do it manually, but not with cron...Here's my crontab (sudo crontab -e)
# m h dom mon dow command
*/1 * * * * sudo /home/laurent/Games/Cod4/StartCod4.sh | egrep 'running|started' >> /home/laurent/Games/Cod4/Serverlog.log
i just installed the basic KDE desktop environment using synaptics from within gnome. although KDE seems to be working fine, i just cant seem to find out how to configure my wireless internet connection. in fact, it looks like KDE doesnt even recognise the wireless for some reason. i did find the network and connections section but there doesnt seem to be any way to configure the wi-fi. i remember with gnome it was so easy that i barely noticed it!
View 1 Replies View RelatedTo start, I'm writing a script to check a file's date via FTP. Here's the portion that I'm having problems with:
Code:
function checkRemote
{
[code]...
After to install Debian Sid, i can't to connect to my network. When i launch lsmod, ath9k is present so the module is enabled.I don't use network-manager-gnome, wicd and other, i modify myself /etc/network/interface. But even with this configuration, the wifi does not works.
View 3 Replies View Relatedcould anyone here report from experience which WIFI USB dongle "just works" with Centos 5.2?
Ok, i bought this usb wifi adapter: [URL]
used these drivers(dident work at all without it, no lights even): [URL]
and i first tryed it out on my netbook (aao, intel atom ubuntu 10.04 32bit), i ran make, then make install, done! i pugged it in and im happly using a 300mbps wifi network.
then i try it on my desktop (custom, AMD phenom x4, ubuntu 10.04 64bit), i install, no errors, then when i plug in the wifi usb, it lights up, then stops, the mouse also stops working(bouth keyboard and mouse is usb) but the kb still works. aftor restarting keeping it pluged in, ubuntu never finishes the splash screen, just stops their, i try again without the wifi and it works, i keeped trying and now the whole comp frezes, even the kb, and i see the system monetor is also frozen, what do i do?
one last thing, it works on bouth my netbook and desktop under windows 7, only on my desktop it wont work on ubuntu.
Problem is the very low quality of wifi (works only in 2meter range)
I have ra3090 hardware.
Code:
I've compiled and installed the official driver from ralink with wpa2 support, installed it, blacklisted rt2800sta
Now 2860 loads signal quality was 33/70 (with rt2800) now it's 99/100 but keep showing the password dialog after each attempt to connect (means it doesn't connect) password is WPA2, and can not be changed to WEP or something.