Ubuntu Networking :: Assigned IPV4 Settings Manually - No Internet Connectivity
Jun 20, 2011
I am new to UBUNTU. I installed the latest one alongside windows 7. I am having problem with the internet connectivity. I configured the static ip settings right I guess. Edited the Auto eth1 and assigned ipv4 settings manually and entered everything correctly.
Address 192.168.xx.xx
Netmask 255.255.255.0
Gateway 192.168.xx.xxx
DNS Server xxx.xxx.xx.x, xxx.xxx.xx.x
Do I have to put MAC Address as well? Which is addressed as 'Network address' in Windows where I put this MAC. I have on board Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20) Network adapter. Do I have to install the driver?
View 3 Replies
ADVERTISEMENT
Jan 23, 2011
I had my desktop running ubuntu 10.10 at my sisters house hooked up to a router sharing internet with her boyfriend never had a problem with it there. I moved into my own apartment this week plugged the cable modem directly into the broadcom ethernet card and couldn't get an ip or anything it wouldn't connect period so I ended up hooking it up usb which works but only at speeds of 5-7mbit when I have 15mbit connection. So I put another ethernet card in hoping it was just problem with the card and tried it that worked.
I got a connection but it was incredibly slow like getting maybe 5k a second so I open network tools in administration menu and start pinging google. While I'm waiting on a bandwidth test to complete and it takes off getting like 20mbit keeps that connection for a while then out of nowhere just drops to almost nothing. Again for a few minutes then falls off completely so I restart and it does the exact same thing starts off slow then something clicks and it works great for 5 min then nothing?
View 5 Replies
View Related
Apr 18, 2011
I have a server with two ethernet ports. I configured eth0 to be static, set at 10.1.10.148. I plugged in another router into the other ethernet port in order to configure that router. I configured eth1 to use dhcp. Using /etc/network/interfaces rather than gnome network manager. When I did this, I lost internet connectivity (internet routes through eth0 of course)
- Why did I lose internet connectivity?
In order to recover internet activity, I had to disconnect the new router on eth1 of course, and do sudo ifdown eth1. That wasn't enough however. After rebooting numerous times and pulling out my hair, I finally tried configuring eth0 as dhcp, rather than static, and this fixed the problem.
- Why didn't sudo ifdown eth1 solve the problem? What information was saved between reboots that somehow remembered that I plugged in the new router? Because my thinking was if /etc/network/interfaces was identical, and the network topology was identical, after a reboot everything should be restored, but it wasn't.
View 7 Replies
View Related
Mar 12, 2009
Does anyone havea good tutorial on Fedora's network scripts, how to edit them, in what order they are called, etc. What I want to do seems simple, but something in the bootup keeps changing it. Right now, I have an image of Fedora Core 7 created in a server with 2 Ethernet cards. I need to specify static IP addresses for each card. Thats simple, and I did that. Now, heres the tricky part, I need to be able to clone this image and place it onto other exact duplicates of the hardware, and have all of the settings stay the same.
What happens here, is that eth0 and eth1 are stored somewhere as devices, and upon boot on a different machine, the Fedora will mount new network cards(different MAC addresses) as eth1 and eth2. It then mvoes my ifcfg-eth0/1 to a backup, and creates two brand new network setting's files, which initialize to DHCP. This creates an issue, becuase these machines do not have monitors nor keyboards attached, nor is their a DHCP server, so its a pain when I swap the machine out, to have to go in with a keyboard/mouse/monitor and reconfigure the network settings before I can connect to it over the LAN.
So does anyone have any advice on how to do this? No matter what i tried, booting the image in a new PC caused Fedora to create two new devices and create brand new network settigns for them, both initialized to DHCP. Hell, I wouldn't care if it created brand new devices, if it would initialize them to static IP addresses that I am expecting.
View 1 Replies
View Related
Apr 21, 2010
I have an iphone, I am trying to get internet connectivity to that phone through wifi. I dont have a wifi router. But i do have a laptop with wifi card. I am connecting to internet via cable modem. In win7 I used to create an accesspoint and do the ics from ethernet card to share via wifi card. It used to work perfectly.
Now as I am sing ubuntu, i want to do the same. I have intalled firestarter, and shared the internet connection through wifi card(wlan0).After this I created an accesspoint using the gnome network applet. Now i can connect my ifone to ths accesspoint. But there is no internet connectivity in my fone.
View 7 Replies
View Related
Mar 6, 2011
I was having trouble with some software detecting ports so i removed ufw and now have no internet
Ive tried and none of these work:
View 1 Replies
View Related
Jun 25, 2011
Wife's laptop has AR5001 Wireless Adapter laptop model is Toshiba Satellite A215
Problem : Wireless networking randomly loses connectivity and can not regain connectivity, the only apparent solution is a full power down , this is not even certain to work. The card works under Windows, she hates Windows. (I love her for this) I know it's not faulty hardware , because it will work for days on end under Windows without problems.
Things I've tried : madwifi drivers (any and all versions available) : These increase stability of the signal and seem to delay the inevitable however it still happens. When using these drivers the only option is to unload them modprobe -r then reboot then remove them again and re add them. It makes no sense why this works, and if I don't remove them prior to rebooting it will not work.
ATH5K drivers : These are pretty much junk, results are unpredictable at best, sometimes it will work perfectly for a few hours, sometimes it will not work at all. Nothing is repeatable, I can't seem to force whatever condition is causing this. rfkill does not show the wifi being blocked (hard or soft), unblocking it anyway does nothing, only way to make this work and it's iffy is to fully power down wait 5-10 minutes turn it back on and it MAY decide to work.
Firmware update : Updated the Toshiba BIOS to the latest version of the firmware 2.0 no joy here either. Same issue both sets of drivers.
Tried different distros and kernels : I've tried Mint 9, 10 ,11 ; Ubuntu 10.10, 10.04 , 9.10 and 11.04 (which is currently installed) , Fedora and OpenSUSE. All are giving the same problems. I have also tried a slew of different kernels no joy from any of them (I'm not at the computer with the issue now I will post exactly what kernel versions I've used when I have access to the machine).
Another useful bit of information, the hard switch to disable/enable wifi WILL disable it but turning it back on does absolutely nothing. The hotkey does nothing at all. The bios does not have an option to disable or enable the wireless card.
I will also post the typical lsmod , lspci , iwconfig all that good stuff when I get back to the computer in question. I'm probably just going to buy a PC card for it and give up on that one, but this is driving me insane and I would really like to see it resolved even if I do replace the hardware.
View 3 Replies
View Related
Nov 9, 2010
I can connect to anything locally, I can SSH in locally but nothing works from outside my network (can't access pages in apache, can SSH, etc.) I've checked the logs I can think of, but what should I be looking for? The last thing I did today was add a FW rule to log and drop from an IP, saved my iptables to a file in /etc. (this was at 10:45am). The last time I successfully logged in remotely 1:03pm. I connected multiple times in between. I've rebooted remotely once or twice. That's it. I've already flushed iptables.
View 1 Replies
View Related
Apr 23, 2009
I've just installed Fedora 10 to basically work as a NAS for another machine - but also serve a couple of web pages. After having alot of issues with network manager (with it changing the subnet so nothing would work), I'm now almost there:
I have two network cards connected in the server:
1) eth0 connects to a switch that ultimately connects it to the net (on a 10.0.0.* network)
2) eth1 connects directly into another server for backups (192.168.0.* network).
Now when I setup eth0, I get network access can ping/ update/ surf the net - absolutely no problems, but when I connect eth1 in - the net dies and nothing works, I can ping devices on both the 10.0.* and 192.168.* networks, just nothing past the gateway. I presume this is either a route or DNS issue, but am unsure about where its falling foul - both the resolv.conf file looks fine as do the ifcfg-ethx scripts.
View 1 Replies
View Related
Mar 3, 2009
I'm new to Fedora 10 and still a newbie with Linux in general. I installed F10 on an old PC I had....and the install went well..however, I'm having Internet Connectivity issues.
Here is what I did so far:
Did an ifconfig command and I have the following:
pan0 Link encap: Ethernet HWaddr D2:30:36:AF:61:95
inet6 addr: fe80::d030:36ff:feaf:6195/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes: 0 (0.0 b) Tx bytes: 8676 (8.4 KiB)
When I go to the Network Configuration Panel I see the following:
Status: Device: Nickname: Type:
Inactive pan0 pan0 Ethernet
Tried to activate and it states Activating network device pan0, please wait... determining IP information for pan0.... A few minutes pass by then. It indicates it failed. Cannot activate network device pan0! I have disabled the Controlled by NetworkManger and enabled the Activate device when computer starts.
View 14 Replies
View Related
Mar 12, 2009
On one of my F10 boxes yesterday, I installed several NM packages with yum update after being advised of their availability. Today, (the first reboot since installation) I no longer have network access on that box.
View 2 Replies
View Related
May 28, 2011
I just installed F15 on a laptop that previous had F12 working well. During install, it finds my wireless card and seems to set it up fine. The full install ran with the wireless active without any problem that I could see. Now, when I start up, I see Network Manager tells me that the wlan is active, but it doesn't show my specific network. If I click on the NM tray icon and open up the panel, my network is shown but it is not "active".
I can double click on it and it will become active - shows the little globe next to the antenna. This works fine for about 2 web pages worth and then FireFox 4 stops being able to find web pages. If I go back to the panel, double click on my wireless network (which looks like it is active already), and reactivate it, I can get the page I was looking for in FireFox, but within a couple of minutes it will stop.
Likewise with yum, while I'm installing software, I'll occasionally get errors like this:
[URL]: [Errno 14] curl#6 - "Couldn't resolve host"
If I reactivate my wireless network in the NM panel, it continues fine. Other computers/phones connected to this network seem to work fine. Is NM known to be problematic in F15?
View 14 Replies
View Related
Apr 20, 2010
I have a work desktop plugged into the work network. As I opened my firewall settings I noticed that it is turned off. My question is how should I configure it? I saw that the interface isn't assigned to any zone... I should assign to internal zone and open some port that I need in order to work? There are some guidelines for configuring the firewall?
View 2 Replies
View Related
Oct 29, 2010
I'm forging a gateway server, We have 2 Internet connection that goes to a load balancer router, and goes to my centos server and from our server goes to a switch for Internet distribution or routing.
OS-CentOS 5.5
[root@server etc]# uname -srio
Linux 2.6.18-194.el5 i386 GNU/Linux
My eth0 and eth1 has the following configuration and IP
[root@server etc]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
# VIA Technologies, Inc. VT6105/VT6106S [Rhine-III]
DEVICE=eth0
BOOTPROTO=none
[code]....
Disabling IPv4 packet forwarding but i already changed it to 1 at sysctl.conf One of the online forum says i need to configure the named.conf deleted some and run it(named.conf) and successful but still when I run network service I still get the :"Disabling IPv4 packet forwarding: net.ipv4.ip_forward = 0" The network is getting the IP range but it doesnt get any Internet connection.
View 3 Replies
View Related
Aug 17, 2015
In one of my customers, the new internet connection have no public IPV4(using GCNAT), only public IPV6.
And there are various services that require external access, like, vpn (openvpn), a java/web system, ssh, rdp(windows).
fileServer(by vpn).
All is running ok in IPV4.Maybe, the solution is a NAT 6to4. We know this is the future, no more public IPV4.
View 0 Replies
View Related
Mar 1, 2010
How would I go about manually making the IP V4 settings? I can view these in System >> administration >> network settings. But there is no way to edit it :S
View 4 Replies
View Related
Aug 3, 2010
I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.
View 4 Replies
View Related
Mar 4, 2010
I'm looking for a newbie friendly guide on tuning stuff like TCP and whatnot. I installed a program on my sister's Windows computer called Internet Cyclone and it did all the settings itself, but I can't seem to find such a program for Linux. I kinda want to learn to do it myself too, so can you point me to a newbie friendly guide on how to optimize my Internet connection settings?
View 1 Replies
View Related
Jun 26, 2010
hen it loads up ubuntu, it automatically detects the settings and resets, but my tv says it can't display the video. I have an old CRT monitor I hook it up to to be able to change settings, but it won't let me change the settings in gnome for the TV. I think the settings it will need to have for the video card hooked up RGB and television would be 1336x768, is there a way that I can program that to where it doesn't automatically detect the monitor?
View 1 Replies
View Related
Jul 20, 2011
I am using both win 7 and ubuntu using grub. If I connect to internet in ubuntu its working fine
but if I connect to net using win 7 internet is not working. However if I connect internet in ubuntu and restart win 7 without switching off router I can access net in win7 even if I switch off router and start again its working fine. But when I shut down system and router and switch on in win7 its not connection.
View 1 Replies
View Related
Jan 8, 2011
once upon a time i manually entered my ISP's DNS servers in /etc/resolv.conf Now i have changed ISP, my old DNS setting are still present even though i have edited my resolv.conf file to my new ISP's DNS servers. Internet still works fine, i just want to use my new ISP's DNS as my old ISP will be closing its doors very soon. Am i doing something wrong, or better put.forgot to edit another file..? I did do this a while ago, so i apologise in advance for my incompetence. I'm stilling running 11.1 / Router has DHCP configured. my resolv.conf file is below
Code:
cat /etc/resolv.conf
### /etc/resolv.conf file autogenerated by netconfig!
#
# Before you change this file manually, consider to define the
# static DNS configuration using the following variables in the
# /etc/sysconfig/network/config file:
# NETCONFIG_DNS_STATIC_SEARCHLIST
[Code]...
View 9 Replies
View Related
Mar 8, 2011
I have a file server that just has some samba shares. What would be some good files to back up off of their for disaster recovery purposes. I already have the smb.conf file from /etc/samba. I'm not familiar with Samba so not sure what else would be useful for if I had to get this reconfigured on another server identically, in a pinch.
View 5 Replies
View Related
Oct 5, 2010
I just installed Ubuntu 10.04 as a dual boot with Win/XP, using the text based installer. Installation seems to have completed OK and Ubuntu boots as expected - but Firefox cannot find any web-page.
How do I start look for the problem cause?
I should say that I previously had installed Kubuntu 10.04 (64 -bit). It was installed for a few months up to May 2010, but then it suddenly lost all internet connectivity after I hibernated the system. Win/XP continued to work with no error. Despite some months of help and advice from the Kubuntu forum, I was unsable to solve the problem. Indeed one piece of advice resulted in the overwriting of my Win/XP installation. I have now re-installed Win/Xp and decided to install 32-Bit Ubuntu - but I am back into the 'no internet connection' problem again. Win/XP works fine.
View 2 Replies
View Related
May 2, 2011
The internet has been working happily on my Mythbuntu machine for many months but stopped working overnight.If I try to do "sudo start networking" I get a "Job failed to start" message.There's also a solid orange light on the ethernet socket.As it's been working for months, I don't think my interfaces config needs updating.Looking at what's been updated recently on the system:
1) I've configured the machine to wake from USB. It was working for a couple of days so I don't believe this is the issue.
2) I set up wake-on-lan with ethtool. Again, this was working (although it did seem to disable wake-on-usb and required a reboot to fix)
3) Update to 11.04 - I said no to this, as 10.10 was working very nicely indeed.
I've disabled wake on lan and rebooted. No joy.
ethtool detects the ethernet controller ok and it's listed in lshw.
View 1 Replies
View Related
Mar 28, 2010
Failed to fetch [URL] Could not connect to 127.0.0.1:8118 (127.0.0.1). - connect (111 Connection refused)----when tor and polipo are not running---
Possible causes:
I just installed tor, privoxy, and polipo and set them up for web browsing anonymity. Other than that I don't recall making any system wide changes.
Other Info:
I can access the internet via a web browser and other programs just fine because i can manually edit each program's internet connection settings. apt-get works when tor and polipo are running. I have used tor and privoxy/polipo in the past and this has never been a problem, so I must have done something different this go around. Obviously I am not sure what that is. Attached are the applicable config files.
View 2 Replies
View Related
Jan 26, 2010
Lately, my internet connection stops for several minutes and then re-connects. Since there are few issues to debug here (router, modem, ADSL, internet provider), I would like first to measure the failure rate. Is there a utility or script that will do the following: Wake every 1-2 minutes, verify a certain web page is available (doesn't matter which). If it fails: dump a line to a log file and get back to sleep. If OK - get back to sleep. Is there such a utility?
View 4 Replies
View Related
Dec 9, 2010
how to install firmware-b43-installer without internet connectivity. I downloaded firmware-b43-installer from another computer with internet. Then I found out from the error messages I also needed b43-fwcutter. So I also downloaded then installed b43-fwcutter. b43-fwcutter installed with no problems. Then I tried to install firmware-b43-installer again with no luck. I saw in the error messages it said something about broadcom-wl-4.150.10.5.tar.bz2. I have no idea how to install a tar.bz2 file.
Here is where I downloaded the files I needed.
http://archive.ubuntu.com/ubuntu/poo...10.5-4_all.deb
http://archive.ubuntu.com/ubuntu/poo...013-2_i386.deb
http://mirror2.openwrt.org/sources/b...0.10.5.tar.bz2
I have all the files now so what do I need to do to install firmware-b43-installer?
View 2 Replies
View Related
Mar 29, 2010
I noticed today my dropbox wouldn't connect, so I reinstalled, still nothing. Tried to reinstall from the repo, nothing. While doing this I noticed that apt cannot check repos, or synaptic. Browsers have no issue but it looks like the system itself does. Same goes for Ubuntu update manager and software center.
View 3 Replies
View Related
Apr 25, 2011
I would like to share my internet connectivity on eth0 with another computer on eth1.
+-----------+ +-----------+ +-----------+
| | | | | |
|ADSL Router|-------------| Computer |-------------|NFS Client |
| | eth0| |eth1 | |
| | dhcp| |static | |
+-----------+ +-----------+ +-----------+
How can i maintain this network topology and allow internet connectivity with dns across my main computer?
View 3 Replies
View Related
Sep 9, 2009
I have a problem on internet connectivity. Let me explain. I'm using webkit for the browser, and when I try to connect to google, it does not connect. But if I use the ip address of this, 209.85.129.147, everything works. First of I had a suspicion from DNS but it seems ok. Because when I try to ping google, it is working again. I'm using an embedded linux, this problem on a MIPS platform, not PC. But I think there should be some settings onto webkit and this should be same with PC platform.
View 1 Replies
View Related
