Ubuntu Networking :: No Wireless Connection Despite Being Told Connection Active?
Jun 11, 2011
My problem is exactly the same as [URL]
but I am stuck at the last hurdle
here are the output of the command that helped to solve the case in the previous post:
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:1b:77:d2:59:55
inet6 addr: fe80::21b:77ff:fed2:5955/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I have also tried sudo dhclient but it hasn't helped and I am still unable to connect to the internet
View 1 Replies
ADVERTISEMENT
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
Dec 24, 2009
First time I installed Fedora 12 and I am new to Linux OS completely. The LAN (ethernet) is coming by default and it's status is inactive. When I click on icon, it tries to connect and then shows status still as inactive. Where as my internet works in Win XP. What do I do for making it active. Second, when I try to install xDSL package for my BSNL broadband, the package is not available. Where do I get this package?
View 1 Replies
View Related
Aug 20, 2010
Most of the time when I go back to my computer, eth0 has disconnected if left overnight or several hours, and takes around 30 secs to reconnect to my router, finding it a little annoying as the reason I leave the computer on is for quick access to the internet.My computer is connected to the router via an ethernet cable.Used Mandriva and Windows XP on this same hardware for awhile and never came across this.How do I keep the connection to the router active?
View 4 Replies
View Related
May 13, 2010
I have successfully connected (and authenticated the user) from linux (Ubuntu) to Active Directory (windows 2003) using "Likewise Open".
1. at the login screen I have to enter "example.localusername" to login. how can I simplify the login so that the user can choose (click)the domain and just enter the username and password (like the login in windows) or make the domain the default.
2. how can I configure the default user profile? meaning, when the user login for the first time, I want to configure his profile. does it use the "/etc/skel" directory like the regular local login?
View 3 Replies
View Related
Jul 12, 2011
I am having problems setting up openvpn with networkmanager. I am running fedora15 with the newest networkmanager. Okay here is some info...
openvpn runs at boot time no problem...
Here is a copy of the boot time message from /var/log/messages
Code:
Here is a copy of tun0 from the ifconfig, and also you can see that openvpn is running from the command "netstat -ntl"
Code:
Here is the options i am using for server.conf for openvpn.
Code:
Okay well when i try to add openvpn to network manager i select the openvpn option and it ask for the required fields.
For gateway i am using -> 10.0.0.0
ALL other options i am just using the defaults...
Now i am not sure if they options that i am using is correct... if anyone has any input i would love to hear some.
Now when i try to start New VPN Connection from network manager it fails to connect and here is what i am getting from /var/log/messages
Code:
If you want to recommend command line options instead of using the network manager gui i am okay with that...
View 7 Replies
View Related
Feb 27, 2010
I am trying to connect to my Company network through VPN. I use a Lynksys router which is most likely not the problem, as I can get the VPN and Remote Desktop to work from a WinXP Pro laptop connected to the same router. I have tried several RDC clients, none of them establish a connection. The VPN connection is active, I can ping and Traceroute to it , but I cannot get the RDC to work. The RDC should connect to 189.0.0.10 on the company network.
View 3 Replies
View Related
Jul 16, 2011
I am trying to sort out some issues following an upgrade from F12.
I have eth0 as the connection I want to use. Prior to the upgrade, this connection was enabled and active at boot.
Now, for some reason after the upgrade it has to be manually enabled at every boot - even though when I go the Network tool, Ethernet Device > General tab - "Activate device when computer starts" is checked.
At every boot time it is inactive.
In all the ifcft-eth0 files, the ONBOOT parameter is set to "yes".
View 12 Replies
View Related
Jun 7, 2010
I have a question regarding the configuration of Network Connection. My wired connection is fine right now and when I check the network connection applet, it display active information of eth0. However, when I click the Configure button, the Network Connection window appears but there's nothing in the Wired panel. Should there be a eth0 in that panel? I remember I had one before, but after I messed with some configuration of VPN, my network became unstable and I remove the Network Manager to try to solve the problem. Since then, there's nothing in my Network Connection window, though I can still connect to my router with eth0. Now even after I reinstalled the Network Manager, I still don't get anything.
View 7 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Jul 2, 2010
During the installation of Opensuse 11.2, I tried the wireless internet connection, and it kept coming back failed.I continued to install the system and when I got on, I entered the SSID (think that's the right way to say it), and the password.When showing that 'map' or whatever, it showed the SSID in the networkmanager.It also said "active".But when clicking on Mozilla Firefox, nothing happened. It just said the server is down.I'm on another Linux system now; so I know the wireless works. It worked great on a third one as well.It is some Atheros Communications, AR5001.I'm not sure what other information you need. Just let me know and I will do what I can to provide. I don't have opensuse up at the moment. I screwed up the dual boot. so right now it's been erased. I'll ask for help on that in another topic.
View 9 Replies
View Related
Mar 28, 2010
A friend who switched ISP's gave me his old Linksys WRT54-G wireless router. I went through the installation procedure and had a wireless connection up and running - smiley face. I had security set up for WPA, and decided to upgrade it to WPA2. Another smiley face. When I went to connect (had already done so successfully), I noticed it referred to my wireless as Linksys - I was expecting to see the SSID. So I started playing around in Network Manager and now I have things all effed up.
Don't know exactly what I did, but now I have no wireless. So I ran a few commands (lshw -C network, iwconfig, ifconfig, and iwlist scan), and looking at the results I see what appear to be inconsistencies in the output. I've posted them below, and make the following observations:
1. Under the lshw it refers to my wireless connection logical name as wmaster0, and has the correct MAC address, etc.
2. Under the iwconfig it says, 'wmaster0 no wireless extensions', but then refers to wlan0 as the wireless connection (although it does not seem to be running).
3. Under ifconfig I see both a wlan0 and a wlan0:avahi. The wlan0 has no IP, the wlan0:avahi does, but it is incorrect.
[Code]...
View 7 Replies
View Related
Nov 12, 2009
Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot
View 5 Replies
View Related
Jun 25, 2010
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
View 14 Replies
View Related
Apr 3, 2011
I'm trying to create a PAN (Personal Area Network) using a laptop (Siragon ML-1040) and my desktop computer, but I get the Connection Refused (111) error.
Blueman doesn't detect any network service between the two computers unless I start PAND on one of them and then it detects the NAP service. That, only after I enable the NAP/Workgroup services on the Services submenu in Blueman. However, it doesn't work neither with the NM plugins or without them (dhclient and that other one I can't remember the name of).
Any clues over here? I'm using pand 4.91 and blueman.
View 3 Replies
View Related
Dec 21, 2010
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies
View Related
Jul 28, 2010
I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?
Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?
View 4 Replies
View Related
Apr 30, 2010
Today installed Ubuntu 10.04. The problem is that I cannot connect to the internet, which was no problem with the previous version (9.10). I use WiFi for my internet connection. My network is shown in Ubuntu. However Ubuntu cannot connect to my network. After some time trying it says : wireless network disconnected
View 9 Replies
View Related
Aug 19, 2010
I have recently installed Ubuntu V9.04 onto my the old (fatter) PS3 and I am trying to connect to my wireless home connection. But upon click the connection icon on the task bar, Wired network and wireless networks are grayed out from the options and the network connections box does not detect anything, not even my neighbors Wifi!
View 1 Replies
View Related
Jan 3, 2010
My icon shows that the connection is good using wifi . However, I could not go online. What's wrong ?
View 10 Replies
View Related
May 26, 2010
I have just installed ubuntu 10 on a thinkpad t410. At first everything worked swimmingly, INCLUDING the wireless. After about five minutes, the wireless stopped working, in that it seemed to think it was still connected but pinging didn't work. I've now restarted several times, and each time I restart, the wireless works for about 1 minute, then stops working. If I try to disconnect and reconnect it will not reconnect (until I restart, that is).
iwconfig shows the correct ESSID and ifconfig shows an address, and "connection information" shows a varying percentage of connection.
View 1 Replies
View Related
May 13, 2011
When I have video running and the video stops, I see that the connection is destroyed in about 5 seconds, which is what I want. If, rather than stopping the video, I pull the plug, I have seen it take 350 and 380 seconds before the connection is destroyed. Why is there such a large difference in the time to destroy a video connection between stopping the video and pulling the plug on it when using net filter connection tracking? How can I shorten the time for the connection to get destroyed when pulling the plug?
View 3 Replies
View Related
Feb 4, 2011
i would like to connect an "e.system 1201" laptop to a "netgear dgn1000" router using a wireless connection, i can get a wired connection to work but not a wireless connection. i beleive the network card in the laptop is a "ralink wireless card for advent/e.system".could anybody tell me if any linux o/s is compatable with the wireless card.
View 3 Replies
View Related
Jan 18, 2011
There is this active connection in firestarter: ec2-174-129-193-12.compute-1.amazonaws.com (Port 443 - Service HTTPS - program python)After doing ps aux | grep PID it shows: /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon...This comes up in the firewall in each login, how do I get rid of it and how did it get there in the first place? Another question is if there is a way to limit a program's access to the internet. For example KCalender.. The things I type up in there may be stored somewhere. How can I disable complete access to the internet for that program and any other program so they can't backup, share, check etc. ?
View 3 Replies
View Related
Jan 1, 2010
i just successfully downloaded and installed ubuntu koala (9.10 i think...) and its a great interface. i am just having extreme difficulty trying to set up the wireless connection. when i log back in osx, i am able to access the router and use the internet as i am doing now when i post in the forum. i am just trying to learn how to configure the wireless in ubuntu as well. have someone who has successful been able to connect wirelessly on an imac, or apple laptop in ubuntu.
View 7 Replies
View Related
Jan 13, 2010
I need to setting up my wireless connection on ubuntu.
View 1 Replies
View Related
Jan 15, 2010
Everything else works fine on Ubuntu 9.10 except when I try to connect to the internet. I have wireless. It just keeps connecting nonstop and never connects. I don't know what to do. Please help me. What should I do? I'm using Acer Aspire 5534 with Windows 7.
View 9 Replies
View Related
Jan 25, 2010
I've got my wireless card working fine, the only thing is that I have to enter the following EVERY time I log in:
Code:
sudo iwconfig ra0 essid MYID
What can I do to bypass this step?
View 3 Replies
View Related
