Ubuntu Networking :: X8SIL-F Intel 82574L Driver For 10.04
Mar 5, 2011
Just got a SuperMicro X8SIL-F board, and I'm having trouble getting the onboard Ethernet controllers to work. They are both Intel 82574L Gigabit. One of them has (rev ff) at the end in lspci.
Out of the box, both controllers show up as eth0 and eth1, but the connection on either is flaky and unreliable. I installed an updated driver from the Intel Download Center, but now I lost one of my controllers and only have eth0. They still both show up in lspci. I installed the driver by extracting the archive and running make install in the src folder, then restarting.
I'm running Ubuntu 10.04 amd64 64bit 2.6.32-24-generic.
View 2 Replies
ADVERTISEMENT
Feb 14, 2011
I'm having issues with Ubuntu 8.04 to see my Intel 82574L ethernet card. Ubuntu is not detecting it at all.
I downloaded the drivers from
[URL]
copied it to the server, untarred, make install ,and now i'm getting notifications that kernel-devel is not installed. I installed linux-headers from the install cd ( ihave the alternate and server one), but i cannot find any kernel-devel or linux-kernel-devel. The driver still does not want to build after installing linux-headers.
I need to use Ubuntu 8.04 due to some specific requirements, do i need the network cards to work.
View 2 Replies
View Related
Sep 10, 2010
NIC: Intel 82574L Gigabit mobo network card
Issue: After the server has been up for a random amount of time, the network connection is lost. Attaching a console and looking at ifconfig I see a large number of dropped packets and collisions.
use;
Code:
lspci -vxx
to list the make manufacture of NIC and the device driver it is using.
In this case: Intel 82574L, e1000e
Look in var/log/messages to get the version of the driver, in this case 1.0.2
Download .gz file with source code, follow instructions to install newest driver (e1000e.ko), in my case version 1.2.10. [URL]
View 2 Replies
View Related
Mar 15, 2011
I am trying to use a rig with Gigabyte GA-880GA-UD3H mother board and Intel 82574L based NIC (EXPI9301CTBLK) under CentOS 5.5. Unfortunately I have issue with the NIC - during boot it fails to initialize:
[Code]....
I receive the same result with the original e1000e driver from the distribution, the latest elrepo driver and the latest driver from Intel site (as seen in the example). I have tried also 2.6.37 kernel version - with the same result. The adapter however works fine under Windows (MiniXP from Hiren's BootCD) and with Ubuntu 10.10 LiveCD.
View 3 Replies
View Related
Jan 1, 2011
I have a Dell Inspiron 6400 with Windows 7 and Ubuntu 10.10. I cannot connect to the internet. My wifi light is on, but it'll flash?
View 9 Replies
View Related
Mar 3, 2010
To make Intel Centrino Ultimate-N 6300 wireless card work on ubuntu, you just need to download the firmware from here decompress it and copy the ucode in /lib/firmware. This works in jaunty. My laptop is a HP Elitebook 8440p.
View 2 Replies
View Related
Mar 3, 2011
I have a HP Pavilion dv6-2155dx Entertainment Notebook with Broadcom Wireless Lan Driver.
I didn't want to bother anyone with this, but I just could't find a solution. I was happy using Ubuntu 10.04 LTS Desktop Edition, because the wifi was working fine, but I messed everything up dealing with networking in terminal.
So formated and now I have Ubuntu 10.10 Netbook Edition, but that didn't solved my problem at all, because my wifi driver still unfunctional.
Before anything, I tried commands like "dbus restart" and "network restart".
So after reading that I can install by getting ndisgtk and the .inf file, I downloaded the right driver from HP Support's page of my notebook. Extracted the package with Wine (got some error because I wasn't running Win7, of course, but that doesn't matter.).
I did this: [url]
And this is my final result:[url]
Technical informations:
Quote:
View 1 Replies
View Related
May 12, 2009
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies
View Related
Jan 18, 2011
I just got a new Sandy Bridge motherboard which comes with a single Intel 82579v network port adapter.
Does anyone know a way to make the Intel 82579v network port work with Linux on Fedora 14?
I tried finding an Intel Linux driver online for it but no luck so far.
I read something online about it may have the newer kernel drivers available for the Fedora kernel, but not familiar with how that works.
View 7 Replies
View Related
Apr 21, 2011
I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :
First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.
Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.
Third if I run ifconfig it only returns my loopback address.
Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?
View 4 Replies
View Related
May 31, 2009
Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
View 2 Replies
View Related
Oct 1, 2010
I have installed xubuntu 10.04 on a HP Pavilion dv1049ea and am having trouble installing the drivers for the graphics card. When installing i had to use the boot option -xforcevesa in order to get the screen working. Now that it is installed there is constant screen flicker but apart from that all other aspects of the system are working fine. In the display menu i am unable to change the refresh rate. How do i change the running driver from vesa to the correct intel driver? The graphics card is an Intel Graphics 82852/82855.
View 2 Replies
View Related
May 16, 2010
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
View 2 Replies
View Related
Feb 22, 2010
Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies
View Related
Mar 26, 2010
Somehow my video driver got deleted and now all i can access is a terminal and no gui. how do i reinstall my video driver?
View 3 Replies
View Related
Feb 24, 2011
I have a Asus 54G43-Pro mobo with Intel GMA G43 video chip on it. It works fine in Ubuntu and using the same display with the same settings, under Maverick in comparison with Lucid, the video is a little more sharp and with more contrast. I have dual boot with Windows and in Windows it is even less sharp and contrast.
In Windows I can tune the sharpness, contrast, etc but I was not able to find a simlar features in Ubuntu. I have checked the Synaptic and even installed some Intel GMA files but I still have no access on tuning the video driver. Is this possible in Ubuntu and possible to be hidden somewhere or I can just forget about it?
View 1 Replies
View Related
Feb 24, 2010
how would i connect to the Internet in Ubuntu with the Intell 3945AGB driver? I can't find anyway to do this.
View 9 Replies
View Related
Sep 20, 2010
I've installed 10.04 netbook on an old Fujitsu Amilo L1300 laptop, with an Intel i845 graphic card. As I know, it would run just OK with the 2.11.0 drivers, but i have no idea how to install that. I've downloaded the driver, and every package written on the page: [URL] At first I couldn't even ./configure the install, but now the configuration runs smoothly. However I cannot finish the make part, because it gives an error.
Quote:
sentor@laptop:~/Documents/xf86-video-intel-2.11.0$ make
make all-recursive
make[1]: Entering directory `/home/sentor/Documents/xf86-video-intel-2.11.0'
Making all in uxa
[Code].....
I've been working on it for four days now, and as much as I'd love to continue it, I've run out of time.
Or if there's a way to use the 2.12.0 driver, then could somebody tell me how?
View 4 Replies
View Related
Oct 3, 2010
Code:
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
Code:
uname -a
Linux dusanlaptop 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
[Code].....
witch sends me here:
[URL]
and I'm not willing to risk much I don't want to screw my system again
in this year in learning process I did it minimum 9 times witch had to be formated
View 4 Replies
View Related
Jan 4, 2011
I have an IBM X3250 M3 server were Iam trying to install Fedora 9 version on RAID 1 and am unable to configure it. Some body guide me with LAN card driver for Inetl 8000 series Gigabit NIC card driver for fedora 9.
View 1 Replies
View Related
Apr 18, 2011
I've been using it since it was put on current and have been having X crash on me repeatedly or getting a black screen from which I can only recover by a hard reboot. This is happening under a couple of different WMs without compositing (so this isn't the same issue that I was having with KDE and xscreensaver).
I'm using the i915 driver with stock 2.6.37.6, but I also tried a 2.6.38.2 kernel but had the same problem with both.
Here's a backtrace (for what it is worth):
Code:
[ 10161.149] 0: /usr/bin/X (xorg_backtrace+0x28) [0x4a02d8]
[ 10161.150] 1: /usr/bin/X (0x400000+0x60fc9) [0x460fc9]
[ 10161.150] 2: /lib64/libc.so.6 (0x7fd25616a000+0x340b0) [0x7fd25619e0b0]
[ 10161.150] 3: /usr/lib64/libdrm_intel.so.1 (drm_intel_bo_emit_reloc+0x0) [0x7fd254a2eb90]
[Code].....
View 14 Replies
View Related
Mar 4, 2010
I upgraded to -current last night hoping to improve my Intel 845G graphics controllers functioning in X, I've had to use the vesa driver for stability. The upgrade was completed but KDE seems as slow as ever. Here's some snippets from Xorg.0.log:
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux speedy 2.6.33-smp #2 SMP Sat Feb 27 20:12:16 CST 2010 i686
code....
It seems I'm still using the vesa driver, any ideas on why the intel isn't being used and how to fix it?
View 2 Replies
View Related
May 5, 2010
I'm still searching for a propiertary driver for my netbook (Asus EEE 901 with an Intel GMA950 graphic card). Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
Does someone know how to install a driver with 3D-support? Should I use a driver from[URL].. I had no problems at Karmic, because the driver was found at "Hardware Drivers". Lucid doesn't show me any driver there. Is there any correlation between the big intel-graphic issues and my 'problem'?
View 5 Replies
View Related
Jun 19, 2011
Yesterday I played a little with a Bitcoin miner and discovered today that I must have scambled my 3D settings. My Intel graphics card doesn't seem to work, instead I must have added a nVidia Settings Manager to my menu.
I already removed the package I mistakenly installed (something concerning OpenCL) but nothing happens. The xorg.conf file seems to be okay.
Gnome now only starts in 2D mode and Unity refuses to work at all. how I might get my Intel card back working?
View 1 Replies
View Related
Sep 1, 2011
i am using fedora 14. i need graphics driver for Intel 82579v . while moving folders it shows poor graphics.Login screen open as step by step. while playing videos ,it hang.my system is very slow now with high configuration. My system hang while improve graphics option in System-> Preference->Desktop Effects and select compiz and
View 1 Replies
View Related
Mar 28, 2011
Ok this is not a question but more or less a small tutorial to help those who have had just as much trouble or more in getting the intel driver + DRI working.
View 2 Replies
View Related
Jan 11, 2011
what all graphics functionality does Intel's i915 graphics driver support?( blending,blitting ).By looking at the source code it appears to me that it support just 'fill rectangle' and 'image blitting'.Is that all?
View 1 Replies
View Related
Apr 18, 2010
I'm running Sabayon on an Intel X4500-equipped laptop (the x4500 is based on the g43 chipset btw). The video card works, but I get low framerates in games and compiz. I had this working in Ubuntu after upgrading my video driver, but I have been unable to find the driver for Sabayon (or even for ubuntu, I didn't bookmark the link :P). I have the xf86-video-intel-2.9.0 driver installed. Does anyone know how I can speed things up?
View 1 Replies
View Related
Nov 3, 2010
Does Linux I2C driver support Intel QM57 chipset?
View 2 Replies
View Related
Jul 20, 2011
I have an HP Pavilion laptop running Xubuntu 11.04. It has an Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) chipset. The driver I'm using is a vesa driver. I ran a check from compiz-check.com to see if my computer could run compiz and it said that I don't have the right driver to run it.It asked if I wanted to check for any proprietary drivers, I ran the check and it came back with nothing. I used to have Ubuntu 9.10 on this same laptop and it ran compiz no problem so I'm a little confused why it won't work with the newer version. Is there something I'm missing? Maybe another driver out there I can try? And if there's really nothing I can do, is there anything out there comparable to compiz that my computer could run? I've been hesitant to upgrade from 9.10 because I ran into this problem with 10.04 so I went back to Karmic and stuck with it until they weren't updating it anymore.
View 2 Replies
View Related
