Ubuntu Networking :: Wifi Broke After Updates?
Nov 27, 2010
I got help getting wifi working on a Toshiba laptop with 10.10. After an update came through and I applied it (I believe it was a linux kernel update or generic headers update) wifi stopped working.I followed the steps in the post to re-create the driver but this time it doesn't work. So 2 questions:1. How to re-create the driver after this update?2. How to prevent this from happening again? So that another update doesn't make the driver not work?
View 2 Replies
ADVERTISEMENT
Jun 8, 2011
I installed 11.04 from disc for a clean install on my dual boot vsta/ubuntu desktop.I was so frustrated that i had no wifi in 11.04 that i got out my 10.04 disk and triple booted that into the mix.Still no wifi (axcept in Vista) however if i unplug my usb wifi device and replug it in while in10.04 i will get the 'connection established' info box yet when i try to open Firefox i get the 'no internet connection or check firewall setting' drop down box.My wifi was working in 10.04 previous to 11.04 install.Note the unplug/replug usb does not work at all in 11.04.Also its strange that my wifi icon in 10.04 went from the bar graph style to the radiating arch style since the reinstall,even though i used the same install disc as pre 11.04
View 3 Replies
View Related
Oct 12, 2010
10.04 Gnome desktop install on Acer Aspire One netbook, wifi connection very unstable since last round of updates, wondering if ndiswrapper would work better
[Code]...
View 5 Replies
View Related
Mar 20, 2010
I just downloaded the most recent version of the updates for Ubuntu 9.10 and for the 4th or 5th time since I've used 9.10 it's broken 9.10 so I can't boot. Usually after breaking it it just hangs at the screen between the big white ubuntu O and the next with the progress bar, this time after the big white O I get random multicolored characters at the top of the screen and the computer hangs with no activity, no hdd lights or anything. Unless anyone has any suggestions I'm just not going to use Ubuntu, at least until 10.04 is available this is really getting old.
View 8 Replies
View Related
Feb 18, 2011
I've been using Ubuntu 10.10 (Maverick) for some time now as the OS for a home Nasbox, along with webmin. Its been great, and I've been able to SSH into the box without any issues in the past.Last night, I ran apt-get update and apt-get upgrade to bring my system more current.
Now, I can't seem to log into SSH any longer, and get a "Connection failed, Windows error 10061" error.I'm going to upgrade the OS to 11 as well in hopes things fix themselves.
View 4 Replies
View Related
Jan 10, 2010
Ubuntu was working fine and everything. I get a notice that there were updates available so I tell Update Manager to update. It wanted a reboot after everything was successfully installed. So I press reboot and this is what I get from now on. How can I fix whatever the updates destroyed?
View 7 Replies
View Related
Nov 10, 2009
After making many updates via pup, including FreeNX, my FreeNX installation has broken. It worked flawlessly before the update. Now when I try to connect my client connects, I see the NoMachine splash screen and then I lose the connection with the following details:
Info: Display running with pid '3404' and handler '0x1a037e'.
NXPROXY - Version 3.1.0
Copyright (C) 2001, 2007 NoMachine.[code]......
View 4 Replies
View Related
Feb 2, 2011
After applying the 31st Jan and 1st Feb updates to -current (32 bit), alt-tab to switch between windows is no longer working in kde. It seems to lock the desktop and then after a few seconds kde goes back to the login screen. If I disable all desktop effects then alt-tab works again.
View 10 Replies
View Related
Feb 25, 2010
I have been running 8.04LTS on a Sony Pentium III with Intel 810 chipset as a desktop system but with the servers installed so I could prototype web sites. The updates two days ago (Feb 23) have broken my theme display and screensaver. I can't get the background image to display like it used to do and none of the Applications Menu icons are showing. I have a second 8.04LTS system on a P4 Intel motherboard that got the same updates and is working fine, nothing broke that I can see.
I tried to use the 'Screens and Graphic' application to set the screen back to what I wanted but it wouldn't 'stick'. I finally hand edited xorg.conf so that it would boot up in a screen that I could use. Still, the 'X' close and min/max icons in the window corners still don't show. This makes it inconvenient to use though it still works as a web server. I dont' know where to look from here.
View 9 Replies
View Related
Jan 13, 2010
I'm running Ultimate Edition 2.4 on an Acer Aspire 3500 lappy, yesterday I allowed my system to upgrade the kernel (from 9.10 kernel 2.6.31-17 to 2.6.31-18 generic) as per usual but when it rebooted I had no WiFi. The network manager didn't even have a wireless section, only wired, and I couldn't setup a wireless network either. If I reboot into the earlier 2.6.31-17 kernel everything is OK.
Another problem is that even tho I have no screensaver enabled and no power saving options enabled, (ie screen never disabled) after a short time of no use the screen goes blank. If within a few minutes I touch the pad or hit a key the screen returns but if it's been an hour or so nothing I do will wake it up,even tho there is still disk activity etc, and the only way to recover is with a hard reset, hold power key to reboot.
View 4 Replies
View Related
May 15, 2010
and this morning's updates broke x. I get a blank screen instead of the login. I'm running an Nvidia 7900GS. I tried re-installing the Nvidia drivers... no good. I switched to the nv drivers and got further; I got the login screen, but when I try to log in it gives me the KDE splash screen and then takes me back to the login screen. I'm not sure what to try next.
View 13 Replies
View Related
Apr 27, 2010
I was having a problem with cairo dock, asked on the board how to resolve was told to reinstall the visual driver for my monitor since I have an ati vid card since with the updated kernal u have to reinstall those drivers(didn't know that, I'm new to opensuse). I thought I did that before so I completely uninstalled it so I could then do a fresh reinstall but I wasn't paying attention and my laptop was unplugged for a while. I stepped away while the install was going on and my laptop died.
I tried plugging it in but had to restart my laptop when I did I got the command line rows and when I tried to start GDM it wouldn't start, I did so as SU. Attempted to connect to the internet via networkmanager and couldn't get wifi or wired to work. Anyway I can access my desktop visually just so I can start yast and install the driver or will I have to reinstall 11.2 or use the cd to repair? If so how do I use the cd to repair?
View 2 Replies
View Related
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
May 8, 2011
The update that broke things contained some 400 packages.The problem is NOT hardware related. There are 2 other linux installs on the laptop that work the way they should.This is all related to using a wired network connection.The update removed the package network-config and did not replace it. Not sure that is the problem because that package is related to the gui and I can not get an ip in cli.
I am stuck at cli because the new kernel broke nvidia (pretty normal). There was also a new xserver, which tends to break nvidia, and as I recall a new kde. Anyway I am unable to rebuild the nvidia driver because I can not establish a network connection to my network to get the packages needed to fix it.
View 11 Replies
View Related
Sep 1, 2011
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
View 2 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Apr 8, 2010
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies
View Related
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Aug 23, 2009
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies
View Related
Apr 29, 2011
I installed Natty on a second partition yesterday to try it out, but i can't get wireless to work. Hardwire connection works fine, so does connecting wirelessly to my router. However, i cannot browse the internet or update. After rebooting a couple of times i was surprised to see internet working, but only for about half an hour. Then it stopped working again. My card is a Intel PRO/Wireless 4965AGN and i'm using the 64 bit version of 11.04.
So my question is if anyone has had the same kind of problem or maybe knows a fix?
I'm really disappointed cause Ubuntu worked out of the box for me since Hardy.
View 1 Replies
View Related
May 4, 2011
I use an Atheros AR922X wireless card in my router/access point and everything was working fine under maverick. Now when I try and start hostapd I get this:
Code:
root@puffin:~# hostapd -d /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
ctrl_inerface_group=0[code]....
View 9 Replies
View Related
Mar 9, 2011
Writing this from a 9.10 LiveCD, so I know that my hardware is working fine.My system is running 10.10 normally. Last night, the update manager popped up, as it frequently does, and said I had some packages that could be updated. So I let it update after which it said I needed to reboot. So I did, and now it doesn't recognize my network connection, and even the blinky lights on the port itself stay dark. don't know a lot about networking or stuff under the hood, but I can work a console and/or text editor if someone can tell me where to look and what to type.My hardware is (from "lspci | grep -i eth"):02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)The packages that have a modified date of last night are:
ubuntuone-client-gnome_1.4.6-0ubuntu2_amd64.deb
python-ubuntuone-client_1.4.6-0ubuntu2_all.deb
libsyncdaemon-1.0-1_1.4.6-0ubuntu2_amd64
[code]....
View 9 Replies
View Related
May 25, 2011
After a recient update to the freenx libraries KDE on Kubuntu 10.04 stopped working but other desktops like gnome kept running. The problem wasn't in the normal log files, but it was found in the .xsession-errors file in the user directory on the server. After the update NX is trying to start kde with the /usr/bin/startkde4 command which doesn't exist. Instead make a link from /usr/bin/startkde to the non existent /usr/bin/startkde4 and it will work again. To do this use the command:
Code:
sudo ln -s /usr/bin/startkde /usr/bin/startkde4
View 3 Replies
View Related
Dec 23, 2010
I managed to get my Linksys AE1000 USB wireless adapter to work on Unbuntu 10.04 LTS.but recently I updated the kernel to 2.6.32-26 and when i rebooted I logged on to see my wireless connection was not working.even worse, I can't fn the links i had that showed me how to install it in the first place, its about the fact that the new kernel uses a different usb setup(probably incorrect, let me know it its incorrect). its an issue that the hacked driver isnt compatible with the new kernel release, how can i revert to the older version that it did work on? i'm using a RALinkTech driver [URL]
View 3 Replies
View Related
Mar 14, 2011
I am running Fedora 14 with KDE on my IBM T60p Thinkpad laptop. The wireless network adapter is Intel PRO/Wireless 3945ABG. The wireless network uses WPA2 with AES encryption.
Until yesterday my wireless worked fine. I originally installed wlassistant and it enabled my Network Manager to work with WPA2. My XP on the same machine still works on wireless without any issues, so both the adapter hardware and the router are eliminated as sources of the problem.
Yesterday I booted up my Linux and noticed there were 20+ security updates and I installed them all. It asked me to logoff and log back in. I did, and since then my wireless is dead as a doorknob. When the wireless adapter initializes it prompts me for the WPA2 password, however the password is visible in the password field. I click to accept it but it cant connect. Network manager just sits there waiting for authentication and nothing happens. The wpa_supplicant service is disabled, however I honestly cant remember if it was enabled before, considering that I use wlassistant. If I enable it, still nothing happens.
Anyway, thinking that the security updates possibly broke wlassistant, I uninstalled it and installed the latest version. The old version was 12, the new one is 13. It makes no difference though.I always use my laptop on wireless, therefore I am dead in the water.
Its really frustrating how something always breaks on this OS. It resembles a leaky boat that always has at least one hole. By the time I plug it another one appears, so I spend 90% of my Linux time fixing problems and have the remaining 10% for work and play. Windows and Mac work out of the box and apparently thats what 99% of users want, hence the 1% market share
Anyway, sorry about this, however losing my network connectivity from installing security updates really ticked me off. Its pretty unacceptable. Anyone has any ideas which recent fixes may be to blame? I am sure it didnt only happen to me.
View 6 Replies
View Related
Apr 30, 2010
I have a huawei e230 modem that used to work pretty good until this week. It has always been much slower on linux than windows but I am not complaining because windows keep disconnecting ever hour or so, while linux can stay connected over night without problem. The modem is still recognized but when I try to connect it suddenly disappears.
View 1 Replies
View Related
