Ubuntu Networking :: Why Isn't 9.10 Picking Up My Wireless Signal?
Jan 25, 2010
I installed WICD because I was looking around the internet and the Ubuntu forums said that it was the best fix for the Network Manager not working. I added the source and installed the package like the Ubuntu site said. I go to Applications => Internet => Wicd Network Manager. It says no wireless networks found. I know that the router is working because my sister is right here next to me playing Maplestory on her laptop! When I do the lshw -C network function in the terminal it is only bringing up two things: the network controller and the ethernet controller. I used Yahoo Answers as my first goto and the answers there said that Linux doesn't have the drivers for the router. I have a Netgear Wireless-N 300 Router WNR2000 and a Dell Inspiron 1750, if that helps. Can someone give me a link to the drivers or tell me in detail what to do?
View 4 Replies
ADVERTISEMENT
Feb 12, 2010
this isnt happening on ubuntu but I think this is more or less a kernel problem that could happen with any flavor. After a new install off of a live cd my wireless card is not picking up any signals...i was able to use wireless while using the live cd but now after it has been isntalled to the hard drive it is not working. even tried in terminal to manually look (iwlist wlan0 scan) but it isnt picking up the signal
View 2 Replies
View Related
Feb 7, 2010
I have Ubuntu 9.10 a dell laptop i am using a tew-644ub usb wireless adaptar and it's seeing signals but wont connect to any my network is unsecured and open. everytime i try it does this swirlly thing then says diconected. im using a diferent computer to post this so if there
View 6 Replies
View Related
Feb 21, 2010
My mother has Windows Vista and i have linux ubuntu. She has a special verizon card that she inserts into her laptop for internet. My computer also has an internal wireless card, but the signal here is very poor. Supposedly, among windows computers, I would be able to get a flashdrive, and with a little program uploaded from my moms computer, set things up using the flashdrive on my computer to share the internet that she pays good money for =/ However, it wont work with ubuntu, which isnt in the windows inner circle. When I open the executable file with WINE it says that it cant run wireless network setup "on this version of windows". lawl. I was wondering, is there any way around that? Is there anyway to network with my mothers internet?
View 2 Replies
View Related
Mar 15, 2010
For the past few months I've been using Ultimate Edition 2.3 on my laptop. Various problems I encountered convinced me to switch. I installed Ubuntu 9.10 today and after the install I can't pick up my wireless router on the list of available networks. I'm able to pick up every other one on my block, just not my own. My server and my roommates laptop can pick it up and are connected to it, the problem seems to be exclusive to this laptop with the fresh install on it.I tried the 'connect to hidden network' option and it doesn't connect, it just keeps asking for the psk
View 5 Replies
View Related
Apr 3, 2010
For some reason my laptop cannot keep a connection with any wireless signal. I have tried several networks and resetting the router and it just doesnt work. Im not sure why...i have selected to connect to a certain network and it either takes forever to finally connect or doesnt connect at all. also when it does connect it only last a few minutes, meanwhile using win7 i have no issues with the connection.
View 2 Replies
View Related
May 15, 2010
I just installed the latest version of Linux on my Dell Mini 910 and it's now not picking up my wireless signal. The wireless card is enabled so I'm not sure what's going on. Btw, I tried entering the smb command that was given to the other member about 4 threads down as he had the same issue. Didn't work though.
View 9 Replies
View Related
Jun 9, 2010
Can I use my wired desktop connection to my wireless router to allow me to connect to an external wireless signal?
DESKTOP <--(wired)--> Wrouter <--(wireless)--> wireless.
View 1 Replies
View Related
Jul 7, 2010
My laptop has sat in the same area for days, I've noticed that in Ubuntu I get a real low signal and can barely connect for a minute and on Windows I get like 3/5 bars. I don't understand what's going on. Is it a driver issue or something?My wireless card is Realtek RTL8187B and using the latest Ubuntu as of today.But just so everyone knows, I have google'd and search around for a few hours. I've seen many different types of problems that just wasn't like mine. Lots of people can't even get theirs to work and some people use different types of drivers. But Ubuntu detects my wireless card fine, I'm just having a signal strength problem. Because the Windows on my laptop has a much stronger signal as stated above.
View 2 Replies
View Related
Sep 7, 2010
After I upgraded from 8.10 (or 8.4, I'm not sure), the wireless signal is very weak:
Code:
~$ sudo iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:"mina"
[code]....
View 1 Replies
View Related
Mar 13, 2011
Im looking for a device that connects via usb in order to greatly increase the range of my wireless adapter card. It must support g and n channels. Ideally if the device need no config, that is if its 'plug in and play' would be ideal. Though if theres support in the ubuntu drivers tool that would be ok too. Im based in europe as well so it has to work here too.
Also looking to find a wireless adapter that supports packet injection on ubuntu-again with a device that needs no drivers or has drivers in the repos.for the record im looking to use these for penetration testing of a network i own.
View 4 Replies
View Related
Jan 17, 2010
I just installed Fedora 12 on my EEE PC has weaker wireless signal that I have previously had with any other linux distro or windows.Has anyone else had this problem, and is there anyway to increase to wireless signal?
View 3 Replies
View Related
May 11, 2011
Is there a way to keep a wireless AP from generating an RF signal at all until it gets pinged by a client which:
1) Knows it's (the AP's) IP, name, passcode, and operating port,
2) Knows which frequency, and periodic ping-rate to use,
3) And, identifies itself not only appropriately, and timely, but only pings twice before it falls silent, awaiting a response, all others would over run the limit, and thusly fail the AP screening and the AP would totally ignore them, logs the attempts, and stays cold, dark, and silent.
In short, only one (1) device is capable of turning it on.
Seems to me that conceptually, it's quite do-able. Has it been done?
View 14 Replies
View Related
Jan 6, 2010
I recently moved to Beijing and am having trouble with my apartment's wireless setup. My laptop can connect to any wireless network I find out in Beijing but not our home network. My Roommate has a mac laptop and has no issues connecting to our wireless router. It appears to connect but receive no signal, which is frustrating me to no end. Here is my spec list and the model of wireless router we are using.
[Code]...
View 4 Replies
View Related
Mar 23, 2010
my laptop can't find the wireless signal of my university's wifi. My room is a bit far, so I wonder if there are solutions for this.
View 1 Replies
View Related
Mar 6, 2010
I am among those unfortunate wretches with an Atheros wireless card (ar5001) and I've had problems with it from the day I installed Ubuntu. I've been using Madwifi to connect to the internet, and it's worked fine, until I lately changed my internet connection, got a new modem etc.
Madwifi works still, but the signal is really weak - while not so on Windows Vista.
I know it's NOT ipv6 related. Do I have to change the connection settings? Is my card outdated or whatever? Am I using inefficient drivers? Should I just not use Madwifi and rather something else instead?
(Trying to install ndiswrapper and get it to work was a dreadful process, so I won't attempt that again.)
View 4 Replies
View Related
Feb 19, 2011
Situation is a cable modem and a Belkin F5D8235 Wireless-N router (and a computer) are at one end of the property. Approx 150-200 ft away I want to put 3 desktop computers none of which have a wireless card or device. I DO have a Linksys WRT54G I'm not using.I want to hardwire the 3 desktop computers to a switch that is hard wired to the Linksys. Putting a wireless card in one of the 3 computers is not practical because of physical obstructions (a lot of cabinetry, furniture, walls) that the Linksys (which can be at the window) would not have to deal with.
Is it possible for the Linksys to 'receive' the wireless signal from the Belkin so the 3 desktops can share the internet? If not, what could I put in the window to 'receive' or 'repeat' the wireless signal?I know this isn't exactly a Ubuntu question, except that 2 of the 3 computers are 64bit Lucid.
View 1 Replies
View Related
Apr 4, 2009
I used to be able to get onto internet with wireless connection on my HP. Now the wireless connection seems fair but I can not connect to internet.
View 14 Replies
View Related
May 13, 2010
I have a new Acer Aspire One, model D250-1958. It uses the Atheros AR928X. I've tried Ubuntu Netbook Remix 9.10 and Ubuntu Netbook Edition 10.04, as well as the conventional Ubuntu. Everything works beautifully, except no wireless. The netbook picks up the signal, but when I provide the Key it fails to connect, and eventually prompts me for the key again.
I've tried to research this on my own, but haven't found a solution. In particular, the solution reported by narnie for his Acer Aspire One D250-1584, <HERE>, didn't work for me.
I'd really like to get this working. The netbook will be much less useful if it can't make use of our wireless router.
View 7 Replies
View Related
Feb 11, 2011
I recently installed Linux Mint and went through the whole business, but when I go to my DNS's it just goes to my FIOS login.
dns:
foxwebhosting.dyndns.org
foxwebhosting2.dyndns.org
I tried everything in mind, but I think the big issue has to do with the reason why it's picking up the FIOS login and not even the index of my server.
View 3 Replies
View Related
Jun 8, 2011
I'm running ubuntu 10.10, in a Gateway M-6750. I can't get my wireless to work properly.
After I lose my wireless signal, I can't connect to a network again. I have to restart my computer or, remove the ndiswrapper module and insert it again so that I can connect to the network again.
I do this with:
Also, there are sometimes when the computer freezes up when trying to search for a signal.
View 1 Replies
View Related
Jul 4, 2010
I just installed ubuntu 10.04 on my laptop. everything was working fine until i installed firestarter. i didnt like it and uninstalled it. when i did that i lost my wireless signal icon at the top of the screen, firefox starts up in offline mode, and limewire says that network connection is lost. i just want it back the way it was before installing firestarter. please help, i dont want to reinstall ubuntu if i dont have to.
View 2 Replies
View Related
Mar 24, 2010
my laptop, an Acer Aspire 5050, recently broke horribly. However, after giving it to an IT teacher at my college, he fixed it, but now the operating system is OpenSuse 11.2 (It was Windows Vista Home Basic before). I have never used OpenSuse, or any Linux before, but everything seemed fine. However, I discovered that I can no longer pick up my wireless internet signal - why is this and what can I do to fix it?! Be aware I am not a computer man, and will not understand complicated technical language.
View 3 Replies
View Related
Jul 12, 2010
My box: Dell Inspiron 1545. lspci results below. I have enabled the Broadcom STA restricted driver.Problems:1. I am noticing in Ubuntu (using Network Manager and Wicd) that I am unable to connect to wireless signals tha are very weak. In my other OS (dual boot), I am able to connect to these weak signals.2. And the speed of these networks is much slower, and the disconnect rate is much higher than in my other OSI am THRILLED with Ubuntu otherwise, just looking to fix this issue so I can use Ubuntu as my primary OS.Could this be an Broadcom STA issue, or Software config issue? etc? Obviously not hardware cause hardware is same on other OS.
Code:
~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev
[code]...
View 1 Replies
View Related
Jul 26, 2010
I recently switched to openSUSE 11.2 and updated to 11.3 almost immediately. Everything appears to be working well, with the minor exception of my wireless.I go to connect and one of two things will happen. Either it will hang in a constant loop of preparing to connect and then asking for the security key and then back to connecting. That or it will just not connect period.I'm using a dell wireless 1397 mini-card.
lspci gave me:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[code]...
View 1 Replies
View Related
Jul 9, 2010
I'm using Fedora 13 , wireless card:Intel 512AN_MMW kernel version:2.6.33.6-147.fc13.i686 below is my problem: when i finished install F13,i can use Wireless card surfing internet i have multiple ap's , and if the ap set with same ssid and different channel, i can roaming between ap's if i'm accessing the internet ,
otherwise, it won't change to greater signal ap if i'm not using the internet , does this condition normally ?
The other question is , if i'm using different ssid , like "wlan01" "wlan02", can i roaming between this two ap's automatically?
View 4 Replies
View Related
Jan 15, 2010
I was running windows vista 32 bit (NOW UBUNTU 9.10) on my custom built pc with a TP-LINK TL-WN353GD wireless pci card, before on vista my wifi signal strength would be in the low 70% range with a speed of 54 Mbps from a access point roughly 250 yards away, now with ubuntu 9.10 signal strength in the 15-20% range with a speed of 1 Mbps. My question is, what is the best way to overcome this wifi signal strength and speed problem, it is a noticable performance disadvatange easily seen on a website like ..... where as before videos would play 95% of the time without having to stop and catch up, would a different wireless pci card be a better choice than what I have, or is the problem in the software as in a driver incompatability or lack of correct driver, not sure how to remedy the problem.
View 4 Replies
View Related
Jan 9, 2011
I installed 10.04 1st by making a partition with bootcamp on MacOSX.Then I formatted the partition according to Ubuntu's instructions. I didn't install rEFIt, because I prefer to just hit the alt (option) key.I made the necessary adjustments according to URL...Community Ubuntu Documentation - and everything seemed to be working fine.I upgraded to Maverick and everything seemed to be working fine aswell.But then I noticed, that the wireless signal keeps failing and I'm asked to put the password again and again..
I don't think this is due to the upgrade from 10.04 to 10.10, but I just noticed it recently, maybe because of the air humidity, the signal was stronger a few days a go.. don't know!!Is there anything I can do?Perhaps install a new driver, or another wificlient, like Wifi-Radar??
View 6 Replies
View Related
Feb 9, 2010
i'm surrounded by concrete block wall but have found an unlocked wifi signal. but i need to do something to help boost the signal. my HP laptop has a built in wifi card and i'm looking for something that i could use or do to help boost the signal.
View 2 Replies
View Related
Dec 7, 2010
I just installed 10.10 on a Dell Inspiron 1300. The wired connection(eth0) works fine but I get no wireless signal when I unplug and try to connect to my network/internet. It shows that wlan0 does exist but it gets no signal. I've used the rfkill to make sure that it wasn't blocked and everything seems to be ok, except I get no wireless signal.
I uninstalled Network Manager and installed Wcid and it found nothing. I even tried installing several signal scanners I found in the package manager. I've removed, updated and reinstalled the broadcom drivers. I still get nothing. The wireless signal from my router is nonexistent according to Ubuntu.
The wireless works fine when I put my windows XP HD in and it also works fine when I put my Mepix or PCLinux OS HDs in the laptop. So I know that the wireless card is not busted.
View 3 Replies
View Related
