I recently moved to Beijing and am having trouble with my apartment's wireless setup. My laptop can connect to any wireless network I find out in Beijing but not our home network. My Roommate has a mac laptop and has no issues connecting to our wireless router. It appears to connect but receive no signal, which is frustrating me to no end. Here is my spec list and the model of wireless router we are using.
[Code]...
Situation is a cable modem and a Belkin F5D8235 Wireless-N router (and a computer) are at one end of the property. Approx 150-200 ft away I want to put 3 desktop computers none of which have a wireless card or device. I DO have a Linksys WRT54G I'm not using.I want to hardwire the 3 desktop computers to a switch that is hard wired to the Linksys. Putting a wireless card in one of the 3 computers is not practical because of physical obstructions (a lot of cabinetry, furniture, walls) that the Linksys (which can be at the window) would not have to deal with.
Is it possible for the Linksys to 'receive' the wireless signal from the Belkin so the 3 desktops can share the internet? If not, what could I put in the window to 'receive' or 'repeat' the wireless signal?I know this isn't exactly a Ubuntu question, except that 2 of the 3 computers are 64bit Lucid.
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View RelatedI moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
I've just installed CentOS 5.3 on a Shuttle PC with an Atheros AR5001X+ Wireless card, and although the card is properly recognised and correctly identified by the OS, there seems to be a point blank refusal to pick up a signal from my network router, which is a Be*Box branded Thomson 585v7. I've previously successfully managed to get this PC and wi-fi card to pick up the signal from that router under other OSes including Kubuntu, openSUSE, Windows XP Pro and Windows 7 RC, but no luck with CentOS 5.3.
Clicking on Scan for Networks... in KWiFiManager doesn't even bother to scan for a network signal. From the very split second I take my finger of the mouse button, it instantly displays a dialog box which tells me . . . "The scan is complete, but no networks have been found."
How on earth can it actually find a network signal, when it doesn't even bother looking for any?! Wireless access is the only way I can get that machine online. A wired connection is not a realistic option, since the ADSL modem/router is in a front room downstairs, and all my PC's are in a back room upstairs, and would require about 10-20 meters of RJ45 ethernet cable and a lot of unnecessary extra work. The PC I'm currently typing this message on (running W7RC) is picking up the wi-fi signal with no problem.
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
I have the computer hooked up to a TV via HDMI. The resolution of the booting process is set to 1280x720, and then KDM goes to the correct 1360x768.
Sometimes when I boot, the TV does not receive a signal until the boot stage reaches the KDM. I do not know how to reproduce this exactly.
1) I made some tests and the webcams works, both other people and me are not able to see my image (any library for video decoding missing?). The cam works fine with cheese.2) Integrated microphone doesn't work, whereas an external one works. The integrated microphone works with "sound recorder" application.My is a Packard Bell netbookCPU Atom N270 @1.6GHz, 1GB RAM, 160GB HDO.S. Ubuntu Karmic Koala 9.10
View 9 Replies View RelatedThis is my basic setup:
[URL]
I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?
I installed WICD because I was looking around the internet and the Ubuntu forums said that it was the best fix for the Network Manager not working. I added the source and installed the package like the Ubuntu site said. I go to Applications => Internet => Wicd Network Manager. It says no wireless networks found. I know that the router is working because my sister is right here next to me playing Maplestory on her laptop! When I do the lshw -C network function in the terminal it is only bringing up two things: the network controller and the ethernet controller. I used Yahoo Answers as my first goto and the answers there said that Linux doesn't have the drivers for the router. I have a Netgear Wireless-N 300 Router WNR2000 and a Dell Inspiron 1750, if that helps. Can someone give me a link to the drivers or tell me in detail what to do?
View 4 Replies View RelatedI have Ubuntu 9.10 a dell laptop i am using a tew-644ub usb wireless adaptar and it's seeing signals but wont connect to any my network is unsecured and open. everytime i try it does this swirlly thing then says diconected. im using a diferent computer to post this so if there
View 6 Replies View RelatedMy mother has Windows Vista and i have linux ubuntu. She has a special verizon card that she inserts into her laptop for internet. My computer also has an internal wireless card, but the signal here is very poor. Supposedly, among windows computers, I would be able to get a flashdrive, and with a little program uploaded from my moms computer, set things up using the flashdrive on my computer to share the internet that she pays good money for =/ However, it wont work with ubuntu, which isnt in the windows inner circle. When I open the executable file with WINE it says that it cant run wireless network setup "on this version of windows". lawl. I was wondering, is there any way around that? Is there anyway to network with my mothers internet?
View 2 Replies View RelatedFor the past few months I've been using Ultimate Edition 2.3 on my laptop. Various problems I encountered convinced me to switch. I installed Ubuntu 9.10 today and after the install I can't pick up my wireless router on the list of available networks. I'm able to pick up every other one on my block, just not my own. My server and my roommates laptop can pick it up and are connected to it, the problem seems to be exclusive to this laptop with the fresh install on it.I tried the 'connect to hidden network' option and it doesn't connect, it just keeps asking for the psk
View 5 Replies View RelatedFor some reason my laptop cannot keep a connection with any wireless signal. I have tried several networks and resetting the router and it just doesnt work. Im not sure why...i have selected to connect to a certain network and it either takes forever to finally connect or doesnt connect at all. also when it does connect it only last a few minutes, meanwhile using win7 i have no issues with the connection.
View 2 Replies View RelatedI just installed the latest version of Linux on my Dell Mini 910 and it's now not picking up my wireless signal. The wireless card is enabled so I'm not sure what's going on. Btw, I tried entering the smb command that was given to the other member about 4 threads down as he had the same issue. Didn't work though.
View 9 Replies View RelatedCan I use my wired desktop connection to my wireless router to allow me to connect to an external wireless signal?
DESKTOP <--(wired)--> Wrouter <--(wireless)--> wireless.
My laptop has sat in the same area for days, I've noticed that in Ubuntu I get a real low signal and can barely connect for a minute and on Windows I get like 3/5 bars. I don't understand what's going on. Is it a driver issue or something?My wireless card is Realtek RTL8187B and using the latest Ubuntu as of today.But just so everyone knows, I have google'd and search around for a few hours. I've seen many different types of problems that just wasn't like mine. Lots of people can't even get theirs to work and some people use different types of drivers. But Ubuntu detects my wireless card fine, I'm just having a signal strength problem. Because the Windows on my laptop has a much stronger signal as stated above.
View 2 Replies View RelatedAfter I upgraded from 8.10 (or 8.4, I'm not sure), the wireless signal is very weak:
Code:
~$ sudo iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:"mina"
[code]....
Im looking for a device that connects via usb in order to greatly increase the range of my wireless adapter card. It must support g and n channels. Ideally if the device need no config, that is if its 'plug in and play' would be ideal. Though if theres support in the ubuntu drivers tool that would be ok too. Im based in europe as well so it has to work here too.
Also looking to find a wireless adapter that supports packet injection on ubuntu-again with a device that needs no drivers or has drivers in the repos.for the record im looking to use these for penetration testing of a network i own.
I just installed Fedora 12 on my EEE PC has weaker wireless signal that I have previously had with any other linux distro or windows.Has anyone else had this problem, and is there anyway to increase to wireless signal?
View 3 Replies View RelatedIs there a way to keep a wireless AP from generating an RF signal at all until it gets pinged by a client which:
1) Knows it's (the AP's) IP, name, passcode, and operating port,
2) Knows which frequency, and periodic ping-rate to use,
3) And, identifies itself not only appropriately, and timely, but only pings twice before it falls silent, awaiting a response, all others would over run the limit, and thusly fail the AP screening and the AP would totally ignore them, logs the attempts, and stays cold, dark, and silent.
In short, only one (1) device is capable of turning it on.
Seems to me that conceptually, it's quite do-able. Has it been done?
my laptop can't find the wireless signal of my university's wifi. My room is a bit far, so I wonder if there are solutions for this.
View 1 Replies View Relatedthis isnt happening on ubuntu but I think this is more or less a kernel problem that could happen with any flavor. After a new install off of a live cd my wireless card is not picking up any signals...i was able to use wireless while using the live cd but now after it has been isntalled to the hard drive it is not working. even tried in terminal to manually look (iwlist wlan0 scan) but it isnt picking up the signal
View 2 Replies View RelatedI am among those unfortunate wretches with an Atheros wireless card (ar5001) and I've had problems with it from the day I installed Ubuntu. I've been using Madwifi to connect to the internet, and it's worked fine, until I lately changed my internet connection, got a new modem etc.
Madwifi works still, but the signal is really weak - while not so on Windows Vista.
I know it's NOT ipv6 related. Do I have to change the connection settings? Is my card outdated or whatever? Am I using inefficient drivers? Should I just not use Madwifi and rather something else instead?
(Trying to install ndiswrapper and get it to work was a dreadful process, so I won't attempt that again.)
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
I used to be able to get onto internet with wireless connection on my HP. Now the wireless connection seems fair but I can not connect to internet.
View 14 Replies View RelatedI have a new Acer Aspire One, model D250-1958. It uses the Atheros AR928X. I've tried Ubuntu Netbook Remix 9.10 and Ubuntu Netbook Edition 10.04, as well as the conventional Ubuntu. Everything works beautifully, except no wireless. The netbook picks up the signal, but when I provide the Key it fails to connect, and eventually prompts me for the key again.
I've tried to research this on my own, but haven't found a solution. In particular, the solution reported by narnie for his Acer Aspire One D250-1584, <HERE>, didn't work for me.
I'd really like to get this working. The netbook will be much less useful if it can't make use of our wireless router.
last night as a download was going the Internet just stopped connection. Then asked me for the WPA & WPA2 personal password. I didn't know what to put since I had already tried multiple pass words I restarted the router.Now for some reason the computer won't pick up the router wireless signal. It picks up multiple connection's around my area so I know that it's not the wireless card. The router is connected via ethernet at the moment so I know the internet works.Do I have to find the ssid? Maybe the router reconfigured it's self when I restart it and broadcasting mode turned off... I just don't know
View 9 Replies View Related
