Ubuntu Networking :: WUSB100 V2 Adapter - Disconnects And Won't Reconnect

Nov 1, 2010

Running Ubuntu 10.10, and I can't get my WUSB100 v2 Linksys adapter to work. I've tried what's in this thread: [URL] Entered lsmod |grep rt into Terminal and found out it runs on the rt2800 chipset, so I blacklisted everything necessary. It finds and connects to my network but after about 10 minutes it disconnects and won't reconnect.

View 6 Replies


ADVERTISEMENT

Ubuntu Networking :: 9.10 - Internet Connection Disconnects / Reconnect

Apr 18, 2010

Recently I've installed Ubuntu 9.10. I have DSL connection so, I wrote all details needed. After trying to connect on it, it automatically disconnects and connect auth connection again. I have worked on 9.04 and older versions and used to work very good, also the internet connection, but not in 9.10.

View 5 Replies View Related

Ubuntu Networking :: Netgear Adapter - Slow & Disconnects - After 5 Minutes

Nov 30, 2010

Just installed yesterday - and I love it so far except my wireless turns on for about 5 minutes, then disconnects.

In order to get internet back I have to either restart or uncheck "Enable Networking" and then recheck it.

I will try to provide as much information, but like I said I am new to Ubuntu and there is some things that are completely different from what I'm used to on Windows:

Wireless Adapter: Netgear RangeMax Next Wireless PCI Adapter WN311B

Additional Driver its Using: Broadcom STA wireless driver

Router: Netgear RangeMax

Information From "sudo iwconfig":

Code:

View 2 Replies View Related

Fedora Networking :: USB WiFi-N Adapter Disconnects Fc14 64-bit

Nov 27, 2010

After a new fresh-from-DVD install of Fedora 14 64-bit (over top of Fedora 12 64-bit which went over top of Fedora 10 64-bit before that) my Linksys WUSB600N adapter connects at login to my WiFi N router with WPA2 Personal.

That is great, as previously (fc10/12) I had to use the Ralink drivers per ogetbilo's thread on this forum (that thread kept me on the net for many years now). And at some point this even became a pain because sometimes the system would boot and refuse to connect to the wireless (which would hang trying to connect) and then crash to a dump screen on shutdown (bug reported). The fix was hoped to be found in upgrading to F14 and the newer kernels with working native Ralink chip support.

But I still have an issue... the connection stays up for a few minutes then drops. If I disable/re-enable wireless it (at least sometimes) re-connects. But obviously that is not workable. This is a USB adapter and I am not entirely sure that there is not some USB powersave issue going on, but I do not see anywhere to disable system USB power saving either.

View 1 Replies View Related

General :: Pppd Disconnects From 3G, Doesn't Reconnect, W/ Persist Set?

May 23, 2010

I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows:

hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular"

[code]....

View 1 Replies View Related

OpenSUSE Wireless :: 11.1 - WiFi Randomly Disconnects / Reconnect Automatically

Sep 6, 2010

I have a hp dv3 2110eg laptop with OpenSuse 11.1 (KDE 3.5.10) and Windows 7 dual boot. My wireless disconnects and connects automatically at random intervals. I do not observe this behaviour when operating my laptop under Windows 7. Following some suggestions given in this forum , I uninstalled networkmanager and installed wicd. However, this does not seem to solve the problem. Given below are the relevant information.
uname -r

Code:
2.6.27.48-0.2-pae
/sbin/lspci

Code:
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection
/sbin/lspci -n

Code:
03:00.0 0280: 8086:4237
/sbin/lspci -nnk

Code:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection [8086:4237]
Kernel driver in use: iwlagn
Kernel modules: iwlagn
dmesg

Code:
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
phy0: Selected rate control algorithm 'iwl-agn-rs'
firmware: requesting iwlwifi-5000-1.ucode

The dmesg output shows firmware request (highlighted with red font), but I have already installed the firmware using YAST.

View 2 Replies View Related

Ubuntu Networking :: Plug In Realtek RTL8187 Wireless Adapter Disconnects Automatically Randomly

Feb 3, 2010

When I first turn it on to the desktop, it automatically connects and disconnects automatically 5 times then sometimes it would disconnect a few times randomly out of the blue.

This ia an external single usb wireless adapter you plug in the usb port on my desktop tower.

View 1 Replies View Related

Ubuntu Networking :: Alfa Network AWUS036H USB Adapter Chipset Realtek 8187L Disconnects

Sep 13, 2010

I have Ubuntu 10.04 (32 bits) and a wireless usb adaptor Alfa Network AWUS036H with Chipset Realtek 8187L. After a few minutes connected, the adaptor disconnects and I can't reconnect again. I search this forum but I'm not sure about what to do. Do I need to get and install another driver? I need to use the windows driver?

View 5 Replies View Related

Networking :: Setup Linksys WUSB100 On Ubuntu 8.04 / 9.10

Jan 29, 2010

I have a linksys wusb100 and need to set it up on ubuntu 8.04 and 9.10.

View 4 Replies View Related

Ubuntu Networking :: Can't Connect To Wireless With Linksys WUSB100?

Apr 1, 2010

I've tried it using the Ubuntu 9.10 live CD (both 32-bit and 64-bit versions) and while the adapter can see wireless networks, it can't connect to them. It asks me for my WPA2 key, but after trying to connect for about 30 seconds it asks me for it again. I've read other threads about this issue but they were kind of confusing.

I just need to know whether the adapter will work and if so, how to get it to connect. I'm so sick of Windows and I'd love to switch to Linux, but I won't be able to if I can't get my adapter to work.

Edit: I just noticed the sticky about posting wireless tickets. I'm sorry, I don't have time to post it right now, but I will post all of that information when I get back.

View 9 Replies View Related

Ubuntu Networking :: Wireless Connection With Linksys WUSB100?

Jul 16, 2011

I am trying to find a driver for my wireless adaptor WUSB100 before I install ubuntu again.

View 1 Replies View Related

Ubuntu Networking :: How To Automatic Ppp Reconnect If Down

Mar 5, 2010

I didn't find a solution to making my 3G/GPRS "modem" reconnect automatically when the connection fails, so I made a solution of my own. It's very annoying when you're downloading a file overnight, only to find that the connection has failed 5 min after you went to sleep.Restarting the NetworkManager daemon makes it automatically connect to all configured interfaces, including 3G/GPRS, so I made a simple script to do that.First, we check if the modem is even connected. Replace Huawei with the brand you're using. Any unique word on the line in lsusb will do fine as well. Then we check if the connection is up, and if it is, we simply exit. Otherwise, the NM daemon is restarted, which causes the 3g/gprs to reconnect.

View 2 Replies View Related

Ubuntu Networking :: Rt2500pci Fails To Reconnect?

Jan 29, 2010

wireless disconnects after a few hours, there is a 50/50 chance that the reconnect fails. if it fails i am asked for the wpa2 key, if i hit cancel and try to connect manually after 2 minutes it connects most times. if i enter the wpa2 key and hit connect i won't get any connection. reading the loglife of my router shows that my laptop connects and disconnects in a 7s rhythm. a restart solves this problem (is there a command to manually restart the network without the need to restart?

laptop: packard bell easynote w1000
ubuntu 9.10
lspci -v readout:
Code:
Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Subsystem: RaLink Device 2560

[Code]....

probably related, after suspend or hibernation networking is disabled, enabling it via right-click does not work again after a restart everything works how it should.

View 4 Replies View Related

Ubuntu Networking :: Internet Shuts Off And Cannot Reconnect?

Sep 21, 2010

I just started using Ubuntu at the advice of a friend. I am running it from a flash drive.I have a wired network that always works fine with Windows on this computer.After starting up Ubuntu it connected right up and I was able to use it. Then, out of the blue the machine shut off. Upon restart, I was unable to connect to the internet.I reinstalled Ubuntu to a different flash drive and it worked fine once again.I left the computer running while I went out for supper, returned and the computer was "asleep" and would not wake back up.I shut off the computer and restarted Ubuntu.No internet again. As always, it works fine in Windows.Also, BOTH times this has happened, the OS says I am connected to the internet, and I can turn the connection on and off, but it is not connected. This happens even if I reboot the computer. (I have a cable connection.)

View 2 Replies View Related

Ubuntu Networking :: Wireless Won't Reconnect After Dropping?

May 26, 2011

I'm having a problem with the wireless on my Asus EEEPC 1000HE using Ubuntu 110.04. Digging into the laptop forums, it says there is a problem with wireless on some models of the 1000HE, but it is not the same wireless device and my wireless problem doesn't seem as bad as listed, so I think it's a different problem. But my problem is that if wireless drops for any reason, it will not start working again unless I either reboot the computer or click the wireless icon in the systray, click disconnect so it stops flashing (like it's trying to reconnect) and then suspend my computer or log off and back on. And it only does the latter because I added a file located at /etc/pm/config.d/00sleep_module with the one line that reads SUSPEND_MODULES="rt2800pci" (my wireless driver) So that one line seems to cause wireless to get a fresh connection after suspending (or something. I'm not a very advanced LInux user). I've tried running the command "sudo/etc/init.d/networking restart", but that does nothing for me. I'm not sure what other command to try to see if can fix it.[URL]

View 3 Replies View Related

Ubuntu Networking :: Can't Reconnect To Internet After Disconnecting

Aug 16, 2011

Here is my problem:

I can reconnect to internet after disconnecting (this happens every 3-4 hours) only if I manually poke out and in ethernet cable to network adapter or reboot ubuntu. Even restarting network-manager not helps. My provider provides internet over pppoe. I have "DSL-connection 1" item in network managers gui menu. And that item disappears after disconnection.

pppd runs with following arguments: lcp-echo-failure 3 lcp-echo-interval 20 So where can I change this parameters, where is that configuration file?

View 3 Replies View Related

Networking :: Ubuntu Can't Reconnect To Gmail After ISP Restores Access / Fix It?

Dec 31, 2010

Lately, my ISP has started making all Google sites inaccessible for a short time every afternoon (last 3-4 days now). I suspect some kind of DNS poisoning... access always comes back later in the afternoon.

When access does come back, non-Linux machines can connect basically right away, but my Ubuntu machine (the primary one I use) seems to need a reboot, as if wrong DNS information gets stuck in the session and the reboot clears it so that the machine can get the correct IP address.

I have not installed nscd, and IIUC the OS should not be persisting DNS cache information without that package. Every reference I can find online to clearing the DNS cache seems to depend on this package.

The objective is just to get back in touch with my Gmail without having to reboot (since e.g. OSX doesn't require a reboot for the same). What should I do?

View 9 Replies View Related

Ubuntu Networking :: Wireless Loses Connection Then Will Not Reconnect?

Mar 24, 2011

I am fairly new to linux. I have Ubuntu 10.10 on my Dell Inspiron E1705. While browsing my internet connection suddenly stops working. It says that I am still connected but the internet doesn't work. When I try to disconnect then reconnect it will not connect to the network. To get it to reconnect i have to turn of the wireless card, delete the connection then restart, turn the card back on and reconnect.

View 9 Replies View Related

Ubuntu Networking :: 10.10 - Wireless Asks For Password But Cannot Reconnect

Apr 21, 2011

Running 10.10 on Hp dv2000. Approx once a day wireless asks for password authentication but cannot re-connect to wireless network. I verified connection, correct password and modem & router functionality but still will not re-connect. After re-boot problem is resolved for another day or two.

View 5 Replies View Related

Networking :: How To Make Ppp Reconnect On Disconnect

Nov 27, 2010

i use ppp to connect to a VPN, and i need it to auto reconnect when i looses connection. How do i make it work?I use Debian.

options.pptp settings:
lock
noauth

[code]....

View 1 Replies View Related

Ubuntu Networking :: WICD Not Automatically Reconnect After Suspend Or Hibernate

Feb 22, 2010

I'm actually running Debian Lenny and using WICD. Sometimes when I wake the system up from standby it reconnects me to my wireless connection, but sometimes it wont. (Same thing for hibernate). On the times that it wont work it just hangs at obtaining IP address.

View 1 Replies View Related

Ubuntu Networking :: Have To Restart To Reconnect Because It Shows No Networks In Manager

Nov 20, 2010

So i installed ubuntu 10.04 on my Hp dv9000 and all went well, then a few days after it asked if i wanted to update to 10.10 so i did and this is where things went kookie.

After i installed i noticed my wifi was all screwy. It would connect but kick me off after several mins of use. I installed WICD hoping that would fix the problem but it didnt. internet work for a few min and then just suddenly cuts out and i have to restart to reconnect because it shows no networks in the manager?

View 4 Replies View Related

Networking :: Wifi Won't Reconnect After Standby Or Hibernate

May 3, 2010

I am using WICD as my wireless network manager and it works connecting to a network for the first time. But when I resume my laptop from hibernate or standby, WICD will not reconnect to the network and gets stuck on obtaining an IP address. And if I try to change networks without hibernating I get the same problem. Also, I notice that the network name is stagnant. I connect to multiple wifi networks a day because of school. When I leave my "home" network and connect to my "school" network WICD still says "Homebtaining IP address" even thought it should say "schoolbtaining IP address." My thoughts are that it isn't releasing the network properly and when its trying to connect it can't because it still thinks it's connected. The only solution I have found is to restart my laptop every time I want to connect to a new network, or shut down every time I am done using my laptop, which is a major inconvenience.

Here is what I am using:

HP tx2000
Broadcom BCM4322
Ubuntu 10.04
WICD 1.7.0

View 5 Replies View Related

Networking :: Unable To Reconnect To Wireless AP Using The Same Settings?

Mar 3, 2010

Sometimes I am unable to reconnect to my wireless AP using the same settings that worked the previous day, and that has me stumped. I think it's due to me switching access points (using different authenticatin) since the last connection.

1) After I enter iwconfig/iwpriv commands to connect my wireless usb card (edimax) to my WPA2 network, what process performs the negotiation with the AP, and is there a way to see status debug messages from that process so that I can see if there was a successful negotiation? (so I can see if the password is correct, etc).

2) Is there a way to manually invoke that process to re-attempt to negotiate? Or must I assume that happens automatically with any iwconfig/iwpriv command?

3) Is there a simple command that will erase all iwconfig/iwpriv settings so that I can start over with my iwconfig/iwpriv commands?

View 1 Replies View Related

Ubuntu Networking :: Reloading Hostapd On AP Side Permits Wicd To Reconnect

Sep 21, 2010

I'm running WiFi AP (hostapd/nl80211) and STA (Wicd) in my home net. More or less all does work fine at last. The only problem I have - STA reconnection works few times only (1-4 times), ending with unsuccessful authentification (and multiple AP probing in hostapd debug output before STA failing).Two contradictive facts take place:

1. Reloading hostapd on the AP side permits Wicd to reconnect, while STA rebooting(!) doesn't help.
2. Another STA - my son's Nokia mobile phone (don't know a model) - reconnects with this AP without problems (we have tried 10 times).

So, you see, first fact says something wrong with AP, while the second one says something wrong with STA. Or you can treat these facts in strictly opposite way Indeed WiFi under Linux is very fragile area yet. I have found plenty of close-to-be-similar reports as well as different resolving ways (but it is rare case).OK, few words about setup. Up to date Kubuntu Maverick testing with backports enabled on both sides. ASUS USB-N11 adapters are in use on both sides. It means RT2870 chip.

View 1 Replies View Related

Ubuntu Networking :: Mobile Broadband Connects / But Won't Reconnect After Dropped Signal

Nov 8, 2010

I'm running a ZTE MF112 HSUPA USB stick (3 broadband dongle) for wireless broadband using network-manager.I can connect fine to mobile broadband, but every now and then, the signal drops and the connection is disconnected. When I try to reconnect it goes straight to network disconnected. It looks like it's not even trying to connect.Then when I right click on network manager, disable mobile broadband, then enable it again, works fine until the next disconnect.The point is, why do I have to keep disabling / enabling it? Pulling the dongle out works too. But there should be a workaround.

View 3 Replies View Related

Ubuntu Networking :: Wireless Auto Reconnect After Power Savings Mode?

Aug 17, 2011

I am running a version of Ubuntu 10.4 with XFCE loaded (actually Qimo, a distribution for kids). I am using a pci wireless card with a broadcom 43XX chipset and WPA2 authentication using the Broadcom STA driver. In an account with privileges I set the auto eth1 (which is what my wireless card comes up as) to connect automatically, and make available to other users.

When I switch to the kid's account, the wireless connects just fine. Then, if the computer is not used for a period of time, the powersavings mode kicks in. When the computer is woken up, the wireless connection does not attempt to reconnect. If you right click on the networking icon it doesn't even show any available connections, even though it can be found by clicking edit connections. The only way I can get it to reconnect is to restart the machine (I will admit that I did not try to restart the networking service, I will try that tonight).

Any ideas? This has been driving me nuts for a few days now. The users during the day are non technical and can't deal with these kind of issues. I can post more details about the setup (as recommended by the sticky post) tonight. I am at work at the moment and can't get to the machine from here - because it has removed itself from the network again.

View 1 Replies View Related

Fedora Networking :: Unable To Reconnect To The Internet When System Comes Out Of Hibernation

Aug 10, 2009

I am having a problem reconnecting to the internet when I put my computer in suspend or hibernate. For some reason when I put my computer in any one of these modes it disconnects from the internet, and I have no way of getting back on the internet after that. I use to have the option of "Enable Networking" on my top panel, but it seems to have disappeared for some reason. Is there any way to stay permanately connected to the internet, even when it is in hibernate mode, or could someone tell me how to get the enable networking icon back?

View 14 Replies View Related

Hardware :: Unable To Get Linksys Wusb100 On Ubuntu 9.10 Using Live Cd

Jan 25, 2010

As stated in an earlier post, I attempted to see if my linksys wusb100 adapter would work out of the box using linux 9.10. I currently have ubuntu 8.04 and have not gotten it to work on 8.04 either.

View 1 Replies View Related

Ubuntu Networking :: Intel Corp. Wifi Link 5300/Karmic 64b/ThinkPad W700: OS Restart 2 Reconnect

Oct 7, 2010

I have an IBM ThinkPad W700 running 64 bit Ubuntu 9.10 Karmic Koala. At the office I normally connect it to the Ethernet since it's never connected very reliably to the wifi there (drops out 2 or 3 times per day, usually at the worst possible time, of course), but it always worked just fine with Netgear WGR614v5 at home... until a week or two ago.

I used to be able to come home, take the laptop out of suspend mode, and it would connect to the wifi. Occasionally there'd be some hitch and I'd have to restart the network manager (sudo /etc/init.d/network-manager restart) but this was only sometimes, and when I did, it'd always work. But now, when I get home from work, I need to restart the entire system to get it to connect properly again. Without restarting the whole system, it either doesn't scan for wifi networks, it doesn't find any wifi networks, it keeps stuffing up my wifi password, or it connects and gets 0% signal.

Presumably, some driver was updated recently and it doesn't work so well. What's the easiest way to find out what drivers have been updated lately, and revert to a previous version? And what else can I try restarting so I don't have to restart the entire system? I've tried /etc/init.d/network-manager restart, /etc/init.d/networking restart, /etc/init.d/network-interface restart, and restart network-manager. I've also tried turning the wireless switch at the front of the laptop off and on, many times.

Code:
$ lspci -nn
[...]
03:00.0 Network controller [0280]: Intel Corporation Wireless Wifi Link 5300 [8086:4236]
[...]
$ ifconfig wlan0

[Code]...

The info above is when I've taken my laptop out of suspend mode and it won't connect to the network. lsmod doesn't say anything about wifi nor wireless; iwlist does see my network, which my older Januty laptop is connected to without drama.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved