Networking :: Setup Linksys WUSB100 On Ubuntu 8.04 / 9.10
Jan 29, 2010I have a linksys wusb100 and need to set it up on ubuntu 8.04 and 9.10.
View 4 Replies
ADVERTISEMENT
Ubuntu Networking :: Can't Connect To Wireless With Linksys WUSB100?
Apr 1, 2010I've tried it using the Ubuntu 9.10 live CD (both 32-bit and 64-bit versions) and while the adapter can see wireless networks, it can't connect to them. It asks me for my WPA2 key, but after trying to connect for about 30 seconds it asks me for it again. I've read other threads about this issue but they were kind of confusing.
I just need to know whether the adapter will work and if so, how to get it to connect. I'm so sick of Windows and I'd love to switch to Linux, but I won't be able to if I can't get my adapter to work.
Edit: I just noticed the sticky about posting wireless tickets. I'm sorry, I don't have time to post it right now, but I will post all of that information when I get back.
Ubuntu Networking :: Wireless Connection With Linksys WUSB100?
Jul 16, 2011I am trying to find a driver for my wireless adaptor WUSB100 before I install ubuntu again.
View 1 Replies View RelatedHardware :: Unable To Get Linksys Wusb100 On Ubuntu 9.10 Using Live Cd
Jan 25, 2010As stated in an earlier post, I attempted to see if my linksys wusb100 adapter would work out of the box using linux 9.10. I currently have ubuntu 8.04 and have not gotten it to work on 8.04 either.
View 1 Replies View RelatedDebian Configuration :: Put Together The Driver With The Linksys WUSB100 V2 Using Ndiswrapper?
Apr 21, 2010I was able to successfully put together the driver with the Linksys WUSB100 v2 using ndiswrapper.
Here is what i get from ndiswrapper -l: rt2870: driver installed device (1737:0078) present (alternate driver: rt2870sta)But, the catch is where it maps to: ra0 instead of wlan0. This has caused me problems in order to get it to connect through network-manager or in the terminal.
ifconfig output for ra0:
ra0:
Link encap: Ethernet HWaddr 00:1e:e5:e8:14:e6
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
OpenSUSE Network :: Install The Drivers For My Linksys Wusb100 Ver2 USB Wifi Stick?
Jan 10, 2011how to install the drivers for my linksys wusb100 ver2 wifi card. What I have found so far is that the usb stick uses a ralink driver (rt2870) I have read that I may need to compile the driver on my system but I am not sure how.
View 9 Replies View RelatedUbuntu Networking :: Run Linksys Setup Installation CD?
Jul 16, 2010I just bought Linksys WAG160N ADSL 2+ Router and modem device. It came with an setup installation CD which is not running on ubuntu. In the manual it is written that it will run only under windows and Mac OS. I have only Ubuntu on my laptop.
I need to run the setup CD to go ahead. I searched more than three hours to find out how to run this CD so that I can complete the setup of my new modem-router but did not find any solution.
Ubuntu Networking :: WUSB100 V2 Adapter - Disconnects And Won't Reconnect
Nov 1, 2010Running Ubuntu 10.10, and I can't get my WUSB100 v2 Linksys adapter to work. I've tried what's in this thread: [URL] Entered lsmod |grep rt into Terminal and found out it runs on the rt2800 chipset, so I blacklisted everything necessary. It finds and connects to my network but after about 10 minutes it disconnects and won't reconnect.
View 6 Replies View RelatedGeneral :: Linksys Wag54g Router Setup In Fedora?
Apr 19, 2011I have just installed fedora 14 and would like to setup my linksys wag54g router in order for me to connect to the internet. I'm the newest newbie ti linux been spoiled rotten by the ease of installing stuff on win7. I need a step by step how to please as I am completely new to the command line as well. I have uploade the quick install guide for the router, but at this stage I dont know wether I should go ahead with what the install guide says or not as I dont know what works for linux.
View 3 Replies View RelatedUbuntu Servers :: Setup A Radius To Use WPA2-Enterprise On A Linksys Wireless Router?
Nov 15, 2010Im trying to setup a radius server to use WPA2-Enterprise on a linksys wireless router. I have so far done the following from this link: [URL]... Im having trouble understanding/finding information on how to configure the configuration files so my radius server will work when somebody tries to authenticate.
View 3 Replies View RelatedOpenSUSE Network :: Setup A Wireless With Linksys Wireless Router And HP Laptop Dual Booting Vista & Suse 11.2
Jun 20, 2010I'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedUbuntu Networking :: Using A Linksys WAG160N?
Dec 1, 2010I'm trying to connect to a friend's Linksys WAG160N router using Ubuntu 10.10, but it's just refusing to connect. I can connect to other wireless networks fine - it seems to just be this router. The wireless indicator applet thing shows that I'm trying to connect, but the password box always just pops up again and again. I'm certain I've got the password correct and am able to connect under OSX on the same computer. Connecting to it via ethernet also works fine.
View 1 Replies View RelatedNetworking :: Ubuntu 10.04 Not Seeing Linksys WUSB300N ?
May 22, 2010Ubuntu 10.04 not seeing my WUSB300N. What is the Easiest way to get this working?
View 1 Replies View RelatedUbuntu Networking :: Linksys EG1032 Not Connecting
Feb 20, 2010I have loaded ubuntu 9.10, and am not getting internet from my router using a linksys EG1032. I have found articles stating that i should use the sk (URL...) or nge URL...)drivers. According to the instructions i found, they require that i make changes to my kernel config. I do not know how to do that, or if doing so is wise.If someone would help me figure out how to connect this NIC card.
View 7 Replies View RelatedUbuntu Networking :: Linksys Wireless G Won't Connect
Mar 25, 2010My first Ubuntu/Mythbuntu install. Installed OS, plugged in linksys wireless G adapter. It finds the network but cannot connect. Discovered wireless priviledges while setting up admin/user accounts. Should be ready to go. or not, I'm thinking it needs a driver but
1) in linux? certainly not in Fedora.
2) If it can see the network it doesn't need a driver,
My settings are wrong or I'm missing something. SSID is set in settings. Do I need mac address and BSSID?
Ubuntu Networking :: 10.04 And Linksys WUSB11 V2.6 Not Working
May 14, 2010I just installed Ubuntu 10.04 on my formerly XP system, and I'm trying to get my wireless network working. I have a Linksys WUSB11 v2.6 wireless adapter connected by USB to the system.
The system networking icon reports "No wired networks".
I'm not sure whether or not the system sees the USB ports... If so, it apparently doesn't recognize the adapter.
I saw a few posts that indicated that this adapter didn't work on 10.04 but it had worked on 9.04.
I'm looking for any info to get this working, including any or all of the following:
* How to determine if the system sees the USB ports (or is it "obvious" that it does)
* Should the wireless adapter work just by plugging it in?
* How to troubleshoot the networking adapter to get it working
* (If downgrading to 9.04 is likely to solve the problem) how to downgrade to 9.04 from 10.04...
Ubuntu Networking :: Linksys WUSB11 V2.8 Not Working ?
Jun 8, 2010The Linksys USB Wifi Adapter (WUSB11 v2. does not work with UBUNTU.
I am using UBUNTU DESKTOP 64-bit (x86_64) 10.04, but I think it is not working in the 32-bit version as well.
I really love to get my Ubuntu work with my 64-bit hardware....
Ubuntu Networking :: 10.04 And Linksys USB Wireless Adapter
Jul 13, 2010Previously I had my desktop hooked up to a nearby router via an ethernet cord with my parents' computer having a wireless usb adapter to connect (This thing: [uRL]). We just moved and our setup has reversed (router is near their computer, I am using the usb adapter). I just installed the latest Ubuntu and now I can't get the usb adapter to work. I'm very new to Linux and I have no idea what to do. I think this is the same usb adapter.
View 1 Replies View RelatedUbuntu Networking :: Can't Get The Linksys Wpc54gs Ver 2 To Get Connect?
Sep 2, 2010My old ubuntu laptop beeps 3 time on startup and then freezes. This forced me to install 10.04 on a new laptop. Now I can't get the linksys wpc54gs ver 2 to get connect. I can see the router with a padlock by it. I pretty sure I have the correct password in the right spot. I can access the internet with the wire connection. I'm sure it something simple I forgot from before when the card was working in the old laptop.
View 2 Replies View RelatedUbuntu Networking :: Linksys WUSB600N Cannot Get Recognized
Sep 3, 2010I think lightning may have killed it. It was working fine. Now I cant get it recognized no matter what I do. It also quit working in Win XP where I never had a problem with it because it had its own connection software.
dmesg yields this-
RTUSB disconnect successfully
[ 312.876034] usb 2-1: new full speed USB device using uhci_hcd and address 7
[ 312.996021] usb 2-1: device descriptor read/64, error -71
[ 313.220031] usb 2-1: device descriptor read/64, error -71
[ 313.436038] usb 2-1: new full speed USB device using uhci_hcd and address 8
[ 313.556025] usb 2-1: device descriptor read/64, error -71
[ 313.780031] usb 2-1: device descriptor read/64, error -71
[ 313.996032] usb 2-1: new full speed USB device using uhci_hcd and address 9
[ 314.404022] usb 2-1: device not accepting address 9, error -71
[ 314.516021] usb 2-1: new full speed USB device using uhci_hcd and address 10
[ 314.924029] usb 2-1: device not accepting address 10, error -71
[ 314.924046] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.664017] pan0: no IPv6 routers present
[ 809.024049] usb 1-1: new high speed USB device using ehci_hcd and address 10
[ 809.182271] usb 1-1: configuration #1 chosen from 1 choice
[ 809.182837]
[ 809.182839]
[ 809.182840] === pAd = ffffc20020b41000, size = 598568 ===
[ 809.182841]
[ 809.182845] <-- RTMPAllocAdapterBlock, Status=0
guest3@guest3-desktop:~$
Ubuntu Networking :: Linksys Wireless-b In 10.10 Desktop
Nov 11, 2010I have a linksys wireless-b wmp11 network card. Can anyone tell me how to get this up and running? Maverick is up to date as of yesterday and I have the cd that came with the card. I have no way to access the internet on the machine. I am typing this from my laptop.
View 2 Replies View RelatedUbuntu Networking :: Linksys AE1000 Under 64bit 10.10?
Feb 18, 2011Here is the situation: I am currently running Ubuntu 10.10 64 bit. I'm trying to get my Linksys AE1000 to run correctly. I have followed many tutorials but most notably was:[URL].. lsmod shows that rt3572sta is loaded. network manager in gnome is able to find my router. my problem occurs when it tries to connect to the router using wpa2 security. It continually asks for the wireless password then will freeze the system after a number of attempts. After digging in for a bit, I was able to dig out a dmesg trapping the error:
BUG: unable to handle kernel paging request at ffffcfb0138af1ec
IP: [<ffffffffa021c7e8>] Cntl0idRTBssidProc+0x78/0x570 [rt3572sta]
PGD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
CPU 2
I really don't see the need to continue on with those error messages lsmod still shows rt3572sta after the failure. In case anyone wants to see the changes I have made to the files before the make, I have included them. but changed the extension to "txt" to accommodate the up-loader and my rt_linux is too big to fit here, just not that it was 2 lines that were changed to work with the kernel. If anyone wants to know what I mean by the system freezes, I do mean just that. The mouse will continue to work, but I am then unable to open any programs, unable to reboot the computer. it requires a hard reset.
I have uninstalled the drivers, installed them, make them, make install them, make clean, start from scratch a few times, and am getting no give here.
Ubuntu Networking :: Can't Use The Internet With Linksys Router
Feb 25, 2011I am dual booting XP and Ubuntu 10.10 64bit on a Dell Latitude E6410 and I have a Linksys WRT120N router connected to my Modem.
So the weird thing is, under XP I can use the internet while connected to my router. Under Ubuntu I can't use the internet while connected to my router. But I can use the internet in Ubuntu if I connect to my neighbor's router called "linksys". So something happens when I connect to my router that makes Ubuntu not able to access the internet. But if I'm connected to my Neighbors router or if I use XP while connected to my router I can use the internet.
I have been using Ubuntu for about a year, so I'm getting better but still a noob. I've tried to figure out what's going on by looking at other forums and posts and trying to see if anyone has solved this. So far I've had no luck. This is also the first of many problem I have encountered that I have been unable to solve using online posts, and is the first problem that I have had to resorted to creating a post to try and fix.
Ubuntu Networking :: Cannot Connect To Linksys-n Routers
Apr 1, 2011I connect to multiple wireless system each day but when I encounter a Linksys-n router the computer will recognize it and connect but does not go online.
Does this give any clue for why it will not connect?
Code:
802.11a/b/g
System wireless is: Toshiba Satellite M115-S3094 with Intel PRO/Wireless 3945ABG (802.11a/b/g), Ubuntu 10.04
Networking :: Ubuntu - Cannot Connect To Linksys Router
Apr 9, 2009I am net to this whole Linux thing. I cant seem to connect to my Linksys router. Not sure if I have to call Linksys or what.Mine is a WRT54GS
View 1 Replies View RelatedUbuntu Networking :: Can't Connect To Wireless Linksys Wusb600n
Jan 3, 2010i cant connect to my wireless network... im using karmic. Ive searched and found quite a lot of threads but arent sure where to start. I have a Linksys wusb600n, and are trying to connect to my network. It detects the network fine but doesnt connect.
View 1 Replies View RelatedUbuntu Networking :: Unlocking Vonage Linksys RT31P2?
Mar 21, 2010I couldn't find any details on how to do this on Ubuntu, so I figured I'd share for anybody who needs to do that. I got this adapter from a garage sale, it's meant for use with vonage service, it has a web interface with disabled voice tab, and a hidden voice admin page. My goal was to access (unlock) those pages, so that I can use it with one of the free sip providers.
The main thread on how to do this is over at bargainshare forums, the only thing I'm adding here is how to do it on Ubuntu as opposed to windows:[URL]... I will write the simplist path using typical defaults, if your setup deviates or if one of the steps below fails, please refer to the original guide at this link to sort things out. Important note: the pc used in the procedure shouldn't be connected to the internet. Internet access is only needed to get files, programs and instructions, either before using the pc for this procedure, or through a separate pc.
Adapter setup:Do NOT connect the adapter to the internet especially if it has been out of service for a while. Connect an ethernet cable to one of the lan ports on the adapter and in a browser go to 192.168.15.1, this is the default lan gateway address. When prompted to log in use admin/admin again that's the default First thing needed is to flash a special unlocking firmware that allows the adapter to acquire clear text configuration file (as opposed to the encrypted vonage one). After downloading the unlocking firmware from guide above, go to the Administration page then the tab for flashing firmware. Select the firmware file you just saved and let it flash, you'll be prompted to log in, I used user/7756112 , more can be found in the guide, if successful, you'll get a message to that effect. Now firmware version should be 1.7.02 and voice 2.09 LId Next we need to get the adapter to get our configuration file, create one as mentioned in the guide above, meister_sd method, put the file in a folder of your choice, we'll need to use that as our tftp root folder later Now we configure the adapter to talk to the pc, under the setup page of the adapter set "Internet Connection Type" to Static IP and assign the adapter a static IP address, e.g. 192.168.1.88, then set the default gateway and DNS1 to a static IP address that you'll later assign to your PC, make sure it's on the same subnet as the IP address you assigned to the adapter, e.g. 192.168.1.99, save the changes Switch the ethernet cable to the wan port of the adapter, so it's connected directly to the pc, no crossover cable needed in my experience, turn off the adapter until we setup the pc
PC setup:First we need dnsmasq package from synaptic. This package can provide dns, dhcp, read only tftp daemons, outstanding piece of software. during the installation, it will automatically start with it's default settings. we'll shut it down so that we can start it with different command line options:
Code:
sudo /etc/init.d/dnsmasq stop Now we configure the pc to act as a gateway and dns server temporarily, System->Preferences->Network connections , then edit the ethernet interface we're using to connect to the adapter, under IPv4 settings, set the method to manual, then add an address entry with the IP address used on the adapter for dns and gateway, ie 192.168.1.99 and gateway and dns as 127.0.0.1 Now we need to start the dns and tftp daemons:
[URL]...
Ubuntu Networking :: Linksys Wpc54g V4 Not Working On Karmic
Mar 29, 2010I really need to get a linksys wpc54g version 4 pcmcia card to work....i have never really had a lot of problems with wireless and thit is a friends laptop that he wanted ubuntu on......if i cant get it to work he will go back to windows and i would not like that to happen lol....here is the output of dmesg and ifconfig lspci and lspcmcia..
Code:
thomas@thomas-laptop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-20-generic (buildd@palmer) (gcc version 4.4.1
[Code]....
Ubuntu Networking :: Linksys WUSB54Gv4 Disconnects After A While On Lucid?
May 4, 2010This problem is fixed in the upcoming kernel, 2.6.34. You can either wait until Canonical releases the update, or download, build and install the 2.6.34 kernel manually. The instructions to do so are HERE. It's fairly easy.I'm having a problem on Lucid (amd64) with a Linksys WUSB54Gv4 usb wifi adapter. After some time (varies between ~10 mins to a few hours), the connection is lost. However, in my case I can't connect back. It tries to establish the connection, then pops up the dialog asking for the WEP key again. It will do this repeatedly, not ever connecting back.This is basically how the disconnect looks in dmesg:Quote:
[ 2657.920014] phy0 -> rt2500usb_set_device_state: Error - Device failed to ente
r state 1 (-16).
[ 2658.120008] phy0 -> rt2500usb_set_device_state: Error - Device failed to enter state 3 (-16).
[code]....
Ubuntu Networking :: Static Lan Adress From Linksys To A Server?
May 5, 2010Okey I have a good start i know there is something I'm missing. After Following this great help tutorial.[URL]..And kinda guestimating and messing around with my Linksys creating a new router assigning a static ip "Lan and wireless" address. configuration for the router looks like this.
[Code]...
I think I might be messing up the interface config file at the "NETWORK" section but i don't know.