Networking :: Wifi Won't Reconnect After Standby Or Hibernate
May 3, 2010
I am using WICD as my wireless network manager and it works connecting to a network for the first time. But when I resume my laptop from hibernate or standby, WICD will not reconnect to the network and gets stuck on obtaining an IP address. And if I try to change networks without hibernating I get the same problem. Also, I notice that the network name is stagnant. I connect to multiple wifi networks a day because of school. When I leave my "home" network and connect to my "school" network WICD still says "Homebtaining IP address" even thought it should say "schoolbtaining IP address." My thoughts are that it isn't releasing the network properly and when its trying to connect it can't because it still thinks it's connected. The only solution I have found is to restart my laptop every time I want to connect to a new network, or shut down every time I am done using my laptop, which is a major inconvenience.
Here is what I am using:
HP tx2000
Broadcom BCM4322
Ubuntu 10.04
WICD 1.7.0
View 5 Replies
ADVERTISEMENT
Feb 22, 2010
I'm actually running Debian Lenny and using WICD. Sometimes when I wake the system up from standby it reconnects me to my wireless connection, but sometimes it wont. (Same thing for hibernate). On the times that it wont work it just hangs at obtaining IP address.
View 1 Replies
View Related
Jan 28, 2010
I am looking for a tool in fedora which can hibernate/standby and also resume after a few seconds automatically with a command. If we have that option by default in fedora.
View 1 Replies
View Related
Jun 15, 2011
I'm using CentOS 5.6, kernel version 2.6.18-238.12.1.el5xen, and the Hibernate and Standby options don't even appear in the System menu. How can I get them to appear?
The funny thing is that before I reset my system to a clean install of CentOS 5.6, I was able to see those entries and execute them just fine. (I think that in that previous installation, by doing some updating of packages I got another kernel version and booting into that one showed the menu items.)
Could it have something to do with the fact that it's a xen kernel? Even though I've disabled xend, it doesn't appear.
View 2 Replies
View Related
Oct 7, 2010
I have an IBM ThinkPad W700 running 64 bit Ubuntu 9.10 Karmic Koala. At the office I normally connect it to the Ethernet since it's never connected very reliably to the wifi there (drops out 2 or 3 times per day, usually at the worst possible time, of course), but it always worked just fine with Netgear WGR614v5 at home... until a week or two ago.
I used to be able to come home, take the laptop out of suspend mode, and it would connect to the wifi. Occasionally there'd be some hitch and I'd have to restart the network manager (sudo /etc/init.d/network-manager restart) but this was only sometimes, and when I did, it'd always work. But now, when I get home from work, I need to restart the entire system to get it to connect properly again. Without restarting the whole system, it either doesn't scan for wifi networks, it doesn't find any wifi networks, it keeps stuffing up my wifi password, or it connects and gets 0% signal.
Presumably, some driver was updated recently and it doesn't work so well. What's the easiest way to find out what drivers have been updated lately, and revert to a previous version? And what else can I try restarting so I don't have to restart the entire system? I've tried /etc/init.d/network-manager restart, /etc/init.d/networking restart, /etc/init.d/network-interface restart, and restart network-manager. I've also tried turning the wireless switch at the front of the laptop off and on, many times.
Code:
$ lspci -nn
[...]
03:00.0 Network controller [0280]: Intel Corporation Wireless Wifi Link 5300 [8086:4236]
[...]
$ ifconfig wlan0
[Code]...
The info above is when I've taken my laptop out of suspend mode and it won't connect to the network. lsmod doesn't say anything about wifi nor wireless; iwlist does see my network, which my older Januty laptop is connected to without drama.
View 1 Replies
View Related
Sep 27, 2010
My question is simple, is it possible to enable and disable automatic sleep/hibernate/standby using BASH? I need it for a bash script.Been searching for a while now, can't seem to find it.
View 2 Replies
View Related
Aug 30, 2010
After I resume from hibernate with my cpu frequency manually set to the highest settings (2ghz) the network manager shows not wifi APs. "wlan0" shows under both ifconfig and iwconfig but "iwlist wlan0 scan" says no results. "sudo iwlist wlan0 scan" also says no results. I've tried rmmod then modprobe with no luck. Rebooting is the only way I can get WiFi working.
I can get wifi working again by:
- rebooting
- changing the cpu scaling to a lower setting then hibernate/resume
- changing the cpu scaling to a lower setting then 'sudo rmmod ath9k; sudo modprobe ath9k;'
I am using Ubuntu 10.04 with Atheros ar5008 (AR5BXB72) using ath9k drives
Code:
$ lspci |grep Atheros
0e:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01)
Code:
$ uname -r
2.6.32-24-generic
View 9 Replies
View Related
Sep 1, 2011
I own an Acer Aspire 5552g. I have installed 2 systems on it: Windows 7 and ubuntu 10.10. Everything works fine except wifi. There is a lot of threads connected to this topic, but none has solved my problem yet. The problem occurs when I hibernate Windows and then load ubuntu - I get unable to turn wifi on. As rfkill says - it is hard blocked. It wouldn't be a problem if i had a hard switch for wifi. but I only have fn+F3 for that, which somehow fails to work in my situation.
Code:
igor@igor-Aspire-5552G:~$ rfkill list
1: phy1: Wireless LAN
Soft blocked: no
Hard blocked: yes
If I reboot Windows and then start ubuntu - everything's fine and working. fn+F3 turns wifi on and off as expected. I will provide some more info: when wifi's working:
Code:
igor@igor-Aspire-5552G:/sys/class/rfkill/rfkill1$ cat state
1 when it doesn't:
Code:
igor@igor-Aspire-5552G:/sys/class/rfkill/rfkill1$ cat state
2 some additional info:
Code:
igor@igor-Aspire-5552G:/$ lspci -nn
//left only network-connected info
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe [14e4:1692] (rev 01)
08:00.0 Network controller [0280]: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) [168c:002e] (rev 01)
View 5 Replies
View Related
Mar 11, 2011
I upgraded my openSUSE to 11.4 and wifi was still working out of the box.
However now when I turn the wifi off using the hardware button and than back on, or when I wake up from hibernate, (k)networkmanager won't recognize the wifi device... I actually have to run /etc/init.d/network restart to reconnect to network. The problem is that it worked in 11.3... why not in 11.4? Now every time I hibernate my laptop I had to manually restart network. In 11.3 it was automatic...
View 6 Replies
View Related
Apr 10, 2010
I have my openSUSE 11.2 connected to router by wifi. I want frequently to access it from my LAN or even Internet, but even so frequent the connection is lost for some reason.
When I am at the box, I can easily do a ifdown/ifup and it will reconnect, but that is a pain when I am not local.
is there some way or maybe a script to check the connection so now and then and if not online then re-connects it automatic ?
View 2 Replies
View Related
Nov 18, 2010
I installed Kubuntu on my PC I want to use remotely, without having keyboard, mouse nor monitor connected to it. So I want it to reconnect automatically if it loses the connection.
I upgraded to newest version of kubuntu, so I have KDE4 and newest network manager app. I have password set to my KDE wallet, so I enter it on boot and the app connects.
But then if kubuntu loses connection and tries to recconect a window appears with "secrets", where I have network connection screen, the password for my wireless network is already in the necessary field and all I have to do is press OK.
Well, I don't want that window to appear. The app already remembers my password, it detects it has to reconnect, but it makes me confirm the password is correct? I want to make it just connect, without my input. But I have no idea where to look.
I've checked the options in network manager, but nothing on that. Then I don't want to change the app if I won't have to, linux tends to be pretty touchy with my network card and I'm afraid it could stop detecting it or something...
Edit: The window appeared again so now I can put full title of it: "Secrets for [NetworkName] - KDE Daemon". Under it I can choose security type for [NetworkName], there is field for password, with the password already inserted and "show password" field under it. Oh, and OK button.
Edit 2: Obviously KDE wallet has "always allow" option for KNetworkManager.
View 1 Replies
View Related
Sep 6, 2010
I have a hp dv3 2110eg laptop with OpenSuse 11.1 (KDE 3.5.10) and Windows 7 dual boot. My wireless disconnects and connects automatically at random intervals. I do not observe this behaviour when operating my laptop under Windows 7. Following some suggestions given in this forum , I uninstalled networkmanager and installed wicd. However, this does not seem to solve the problem. Given below are the relevant information.
uname -r
Code:
2.6.27.48-0.2-pae
/sbin/lspci
Code:
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection
/sbin/lspci -n
Code:
03:00.0 0280: 8086:4237
/sbin/lspci -nnk
Code:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection [8086:4237]
Kernel driver in use: iwlagn
Kernel modules: iwlagn
dmesg
Code:
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
phy0: Selected rate control algorithm 'iwl-agn-rs'
firmware: requesting iwlwifi-5000-1.ucode
The dmesg output shows firmware request (highlighted with red font), but I have already installed the firmware using YAST.
View 2 Replies
View Related
Jun 27, 2010
Running Ubuntu 10.04 on a dual-boot Windows 7 laptop.
On "suspend," the wireless card appears to close connections correctly. Then, >15 minutes later, the laptop's wifi LED lights up and the laptop generates heat.
The computer should be on standby, but instead it's waking itself up and running down the battery.
Are there any programs that might be failing to suspend for sleep? Are there any settings to prevent the wifi card from waking the computer?
I only noticed this because the laptop was getting hot and the battery was wearing down.
View 2 Replies
View Related
May 14, 2010
my Eee PC has various troubles with the current Lucid kernel (2.6.32). These include, that the wifi won't work and that I can't use hibernate. A netbook without wifi is a little bit useless I even tried the usual bugfixes, that you can find in the web (installing the original RAlink drivers, updating to 2.6.33), but nothing really worked.As a consequence, I downgraded to Karmic again, were everything just worked fine.My question is now, is it possible to run Lucid with the older kernel available in Karmic?
View 1 Replies
View Related
Sep 15, 2011
wifi card:atheros ar5007egOS: openSUSE11.4My laptop can't connect on network after system hibernate. It has been asking me for enter the wifi password. But when I input the wifi password it still can't connect on network. I have to reboot it.
View 3 Replies
View Related
Mar 5, 2010
I didn't find a solution to making my 3G/GPRS "modem" reconnect automatically when the connection fails, so I made a solution of my own. It's very annoying when you're downloading a file overnight, only to find that the connection has failed 5 min after you went to sleep.Restarting the NetworkManager daemon makes it automatically connect to all configured interfaces, including 3G/GPRS, so I made a simple script to do that.First, we check if the modem is even connected. Replace Huawei with the brand you're using. Any unique word on the line in lsusb will do fine as well. Then we check if the connection is up, and if it is, we simply exit. Otherwise, the NM daemon is restarted, which causes the 3g/gprs to reconnect.
View 2 Replies
View Related
Nov 27, 2010
i use ppp to connect to a VPN, and i need it to auto reconnect when i looses connection. How do i make it work?I use Debian.
options.pptp settings:
lock
noauth
[code]....
View 1 Replies
View Related
Jan 29, 2010
wireless disconnects after a few hours, there is a 50/50 chance that the reconnect fails. if it fails i am asked for the wpa2 key, if i hit cancel and try to connect manually after 2 minutes it connects most times. if i enter the wpa2 key and hit connect i won't get any connection. reading the loglife of my router shows that my laptop connects and disconnects in a 7s rhythm. a restart solves this problem (is there a command to manually restart the network without the need to restart?
laptop: packard bell easynote w1000
ubuntu 9.10
lspci -v readout:
Code:
Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Subsystem: RaLink Device 2560
[Code]....
probably related, after suspend or hibernation networking is disabled, enabling it via right-click does not work again after a restart everything works how it should.
View 4 Replies
View Related
Sep 21, 2010
I just started using Ubuntu at the advice of a friend. I am running it from a flash drive.I have a wired network that always works fine with Windows on this computer.After starting up Ubuntu it connected right up and I was able to use it. Then, out of the blue the machine shut off. Upon restart, I was unable to connect to the internet.I reinstalled Ubuntu to a different flash drive and it worked fine once again.I left the computer running while I went out for supper, returned and the computer was "asleep" and would not wake back up.I shut off the computer and restarted Ubuntu.No internet again. As always, it works fine in Windows.Also, BOTH times this has happened, the OS says I am connected to the internet, and I can turn the connection on and off, but it is not connected. This happens even if I reboot the computer. (I have a cable connection.)
View 2 Replies
View Related
May 26, 2011
I'm having a problem with the wireless on my Asus EEEPC 1000HE using Ubuntu 110.04. Digging into the laptop forums, it says there is a problem with wireless on some models of the 1000HE, but it is not the same wireless device and my wireless problem doesn't seem as bad as listed, so I think it's a different problem. But my problem is that if wireless drops for any reason, it will not start working again unless I either reboot the computer or click the wireless icon in the systray, click disconnect so it stops flashing (like it's trying to reconnect) and then suspend my computer or log off and back on. And it only does the latter because I added a file located at /etc/pm/config.d/00sleep_module with the one line that reads SUSPEND_MODULES="rt2800pci" (my wireless driver) So that one line seems to cause wireless to get a fresh connection after suspending (or something. I'm not a very advanced LInux user). I've tried running the command "sudo/etc/init.d/networking restart", but that does nothing for me. I'm not sure what other command to try to see if can fix it.[URL]
View 3 Replies
View Related
Aug 16, 2011
Here is my problem:
I can reconnect to internet after disconnecting (this happens every 3-4 hours) only if I manually poke out and in ethernet cable to network adapter or reboot ubuntu. Even restarting network-manager not helps. My provider provides internet over pppoe. I have "DSL-connection 1" item in network managers gui menu. And that item disappears after disconnection.
pppd runs with following arguments: lcp-echo-failure 3 lcp-echo-interval 20 So where can I change this parameters, where is that configuration file?
View 3 Replies
View Related
Mar 3, 2010
Sometimes I am unable to reconnect to my wireless AP using the same settings that worked the previous day, and that has me stumped. I think it's due to me switching access points (using different authenticatin) since the last connection.
1) After I enter iwconfig/iwpriv commands to connect my wireless usb card (edimax) to my WPA2 network, what process performs the negotiation with the AP, and is there a way to see status debug messages from that process so that I can see if there was a successful negotiation? (so I can see if the password is correct, etc).
2) Is there a way to manually invoke that process to re-attempt to negotiate? Or must I assume that happens automatically with any iwconfig/iwpriv command?
3) Is there a simple command that will erase all iwconfig/iwpriv settings so that I can start over with my iwconfig/iwpriv commands?
View 1 Replies
View Related
Jan 13, 2010
i am running 9.10 on a compaq 2209cl laptop. has been working great with no issues till i updated the other day. when i come out of standby (opening laptop lid, or hit the power button to wake up) my network connection does not start, and there is no wireless networks displayed. a reboot usually takes care of this prob until it goes into standby again. just wanna know if there is a way i can solve this myself or if i gotta wait for a patch? it aint too bad but is sure is annoying when i get on and off this thing all the time.
View 9 Replies
View Related
Apr 18, 2010
Recently I've installed Ubuntu 9.10. I have DSL connection so, I wrote all details needed. After trying to connect on it, it automatically disconnects and connect auth connection again. I have worked on 9.04 and older versions and used to work very good, also the internet connection, but not in 9.10.
View 5 Replies
View Related
Nov 1, 2010
Running Ubuntu 10.10, and I can't get my WUSB100 v2 Linksys adapter to work. I've tried what's in this thread: [URL] Entered lsmod |grep rt into Terminal and found out it runs on the rt2800 chipset, so I blacklisted everything necessary. It finds and connects to my network but after about 10 minutes it disconnects and won't reconnect.
View 6 Replies
View Related
Dec 31, 2010
Lately, my ISP has started making all Google sites inaccessible for a short time every afternoon (last 3-4 days now). I suspect some kind of DNS poisoning... access always comes back later in the afternoon.
When access does come back, non-Linux machines can connect basically right away, but my Ubuntu machine (the primary one I use) seems to need a reboot, as if wrong DNS information gets stuck in the session and the reboot clears it so that the machine can get the correct IP address.
I have not installed nscd, and IIUC the OS should not be persisting DNS cache information without that package. Every reference I can find online to clearing the DNS cache seems to depend on this package.
The objective is just to get back in touch with my Gmail without having to reboot (since e.g. OSX doesn't require a reboot for the same). What should I do?
View 9 Replies
View Related
Mar 24, 2011
I am fairly new to linux. I have Ubuntu 10.10 on my Dell Inspiron E1705. While browsing my internet connection suddenly stops working. It says that I am still connected but the internet doesn't work. When I try to disconnect then reconnect it will not connect to the network. To get it to reconnect i have to turn of the wireless card, delete the connection then restart, turn the card back on and reconnect.
View 9 Replies
View Related
Apr 21, 2011
Running 10.10 on Hp dv2000. Approx once a day wireless asks for password authentication but cannot re-connect to wireless network. I verified connection, correct password and modem & router functionality but still will not re-connect. After re-boot problem is resolved for another day or two.
View 5 Replies
View Related
Feb 20, 2010
I'm new to ubuntu and using 9.10. I have installed a dlink wua 2340 wireless adaptor and it is working properly. But after waking up computer by standby mode, wireless connection breaks and the wireless device is not mounted. Therefore I always have to shut down the computer and restart again to establish wireless connection.
View 1 Replies
View Related
Aug 10, 2009
I am having a problem reconnecting to the internet when I put my computer in suspend or hibernate. For some reason when I put my computer in any one of these modes it disconnects from the internet, and I have no way of getting back on the internet after that. I use to have the option of "Enable Networking" on my top panel, but it seems to have disappeared for some reason. Is there any way to stay permanately connected to the internet, even when it is in hibernate mode, or could someone tell me how to get the enable networking icon back?
View 14 Replies
View Related
