Networking :: Unable To Reconnect To Wireless AP Using The Same Settings?
Mar 3, 2010
Sometimes I am unable to reconnect to my wireless AP using the same settings that worked the previous day, and that has me stumped. I think it's due to me switching access points (using different authenticatin) since the last connection.
1) After I enter iwconfig/iwpriv commands to connect my wireless usb card (edimax) to my WPA2 network, what process performs the negotiation with the AP, and is there a way to see status debug messages from that process so that I can see if there was a successful negotiation? (so I can see if the password is correct, etc).
2) Is there a way to manually invoke that process to re-attempt to negotiate? Or must I assume that happens automatically with any iwconfig/iwpriv command?
3) Is there a simple command that will erase all iwconfig/iwpriv settings so that I can start over with my iwconfig/iwpriv commands?
View 1 Replies
ADVERTISEMENT
May 26, 2011
I'm having a problem with the wireless on my Asus EEEPC 1000HE using Ubuntu 110.04. Digging into the laptop forums, it says there is a problem with wireless on some models of the 1000HE, but it is not the same wireless device and my wireless problem doesn't seem as bad as listed, so I think it's a different problem. But my problem is that if wireless drops for any reason, it will not start working again unless I either reboot the computer or click the wireless icon in the systray, click disconnect so it stops flashing (like it's trying to reconnect) and then suspend my computer or log off and back on. And it only does the latter because I added a file located at /etc/pm/config.d/00sleep_module with the one line that reads SUSPEND_MODULES="rt2800pci" (my wireless driver) So that one line seems to cause wireless to get a fresh connection after suspending (or something. I'm not a very advanced LInux user). I've tried running the command "sudo/etc/init.d/networking restart", but that does nothing for me. I'm not sure what other command to try to see if can fix it.[URL]
View 3 Replies
View Related
Mar 24, 2011
I am fairly new to linux. I have Ubuntu 10.10 on my Dell Inspiron E1705. While browsing my internet connection suddenly stops working. It says that I am still connected but the internet doesn't work. When I try to disconnect then reconnect it will not connect to the network. To get it to reconnect i have to turn of the wireless card, delete the connection then restart, turn the card back on and reconnect.
View 9 Replies
View Related
Apr 21, 2011
Running 10.10 on Hp dv2000. Approx once a day wireless asks for password authentication but cannot re-connect to wireless network. I verified connection, correct password and modem & router functionality but still will not re-connect. After re-boot problem is resolved for another day or two.
View 5 Replies
View Related
Aug 10, 2009
I am having a problem reconnecting to the internet when I put my computer in suspend or hibernate. For some reason when I put my computer in any one of these modes it disconnects from the internet, and I have no way of getting back on the internet after that. I use to have the option of "Enable Networking" on my top panel, but it seems to have disappeared for some reason. Is there any way to stay permanately connected to the internet, even when it is in hibernate mode, or could someone tell me how to get the enable networking icon back?
View 14 Replies
View Related
Aug 17, 2011
I am running a version of Ubuntu 10.4 with XFCE loaded (actually Qimo, a distribution for kids). I am using a pci wireless card with a broadcom 43XX chipset and WPA2 authentication using the Broadcom STA driver. In an account with privileges I set the auto eth1 (which is what my wireless card comes up as) to connect automatically, and make available to other users.
When I switch to the kid's account, the wireless connects just fine. Then, if the computer is not used for a period of time, the powersavings mode kicks in. When the computer is woken up, the wireless connection does not attempt to reconnect. If you right click on the networking icon it doesn't even show any available connections, even though it can be found by clicking edit connections. The only way I can get it to reconnect is to restart the machine (I will admit that I did not try to restart the networking service, I will try that tonight).
Any ideas? This has been driving me nuts for a few days now. The users during the day are non technical and can't deal with these kind of issues. I can post more details about the setup (as recommended by the sticky post) tonight. I am at work at the moment and can't get to the machine from here - because it has removed itself from the network again.
View 1 Replies
View Related
Oct 26, 2015
I have done a clean install of debian 8.2 (jessie) on a new PC. I am working through some of the issues that were not correctly installed. One of them is the wireless network. On startup, I have a wireless connection. At some point within the first 5-25 minutes of being logged in and doing computer stuff (there is no known action that leads to the reaction), the wireless disconnects from the network and will not reconnect. The network-manager-gnome shows three horizontal dots; the system settings> network shows all of the available networks, the strength of their signal, and the "connecting" circle spins. This behavior occurs with both WPA and insecure networks.
I have followed the guidelines for Debian>WiFi>HowToUse (https://wiki.debian.org/WiFi/HowToUse). Nothing appears amiss when following the Network-Manager>Gnome portion of the instructions. I was going to try the alternate WICD program, but one has to uninstall network-manager to use wicd and synaptic also wants to remove something called "gnome", too-- uninstalling a package with that name makes me uneasy. I have noticed that the installed versions of network-manager (0.9.10.0-7) and network-manager-gnome (0.9.10.0-2) don't exactly agree, but I doubt that that is significant.
root@fayalite:/home/agnewton# iwconfig
eth0 no wireless extensions.
wlan0 IEEE 802.11bgn ESSID:"Mineralogy"
Mode:Managed Frequency:2.472 GHz Access Point: 64:E5:99:2C:A0:7E
Bit Rate=150 Mb/s Tx-Power=20 dBm
Retry short limit:7 RTS thr=2347 B Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-18 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
[CODE]..
View 8 Replies
View Related
Sep 28, 2015
I use Debian Jessie 8.2 and I am using a 3G connection using this modem => [URL] ....
The 3G connection works fine, except after 24 hours the connection drops and I cannot reconnect. If I reboot the computer, the connection will work again.
My guess is that my ISP gives me a new IP address after 24 hours and somehow my system cannot handle it.
How can I reconnect my 3G connection without rebooting?
I have already tried the following commands:
Code: Select allsudo service network-manager restart
Code: Select alldhclient -r eth0
dhclient eth0
Code: Select allsystemctl restart ModemManager
Results of journalctl and grepping my connection name (SFR)
Code: Select allsept. 22 17:58:19 ark1 NetworkManager[512]: <info> Policy set 'SFR Web / Prepaid 1' (eth0) as default for IPv4 routing and DNS.
sept. 23 18:17:07 ark1 NetworkManager[9446]: <info> new connection /etc/NetworkManager/system-connections/SFR Web * Prepaid 1
sept. 23 18:17:08 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR Web / Prepaid 1'.
[Code] ....
As you can see sept 22 at time 17:58 is when the computer started up. And roughly 24 hours after it failed to reconnect.
Also I should mention that there is a script to run the command:
Code: Select allsudo service network-manager restart
if the computer cannot ping a server, ie if the connection is lost.
More journalctl info when the system tries to reconnect:
Code: Select allsept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR'.
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) starting connection 'SFR'
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
[Code] ....
View 3 Replies
View Related
Apr 10, 2010
I have my openSUSE 11.2 connected to router by wifi. I want frequently to access it from my LAN or even Internet, but even so frequent the connection is lost for some reason.
When I am at the box, I can easily do a ifdown/ifup and it will reconnect, but that is a pain when I am not local.
is there some way or maybe a script to check the connection so now and then and if not online then re-connects it automatic ?
View 2 Replies
View Related
Sep 8, 2011
I have problem with my wireless GSM connection , my notebook has built-in Toshiba (in fact Ericsson) F5521gw wireless modem , it is detected and usable by default without installing additional software.Problem is that I can connect flawlessly only once after switching on notebookif I disconnect manually I'm not able to connect again, i have to reboot my computer or another solution which allows me to reconnect is closing and opening lid (putting notebook in suspended state)I'm using Toshiba Tecra r850, openSUSE 11.4 x64 on Gnome 2 DE, using NetworkManager and nm-applet /var/log/messages after using disconnect from nm-applet:
Code:
Sep 8 17:04:39 linux-b5nl pppd[9933]: Terminating on signal 15
Sep 8 17:04:39 linux-b5nl pppd[9933]: Connect time 243.2 minutes.
[code]....
View 5 Replies
View Related
Feb 21, 2010
I've started using slackpkg to keep my system up to date now and after the updates in January my wireless doesn't reconnect after a resume from suspend, I have to connect then kill dhcpcd and restart it. Any ideas what changed there and how I fix it. From the install of 13 until Jan it worked fine.
View 1 Replies
View Related
Sep 6, 2010
I have a hp dv3 2110eg laptop with OpenSuse 11.1 (KDE 3.5.10) and Windows 7 dual boot. My wireless disconnects and connects automatically at random intervals. I do not observe this behaviour when operating my laptop under Windows 7. Following some suggestions given in this forum , I uninstalled networkmanager and installed wicd. However, this does not seem to solve the problem. Given below are the relevant information.
uname -r
Code:
2.6.27.48-0.2-pae
/sbin/lspci
Code:
03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection
/sbin/lspci -n
Code:
03:00.0 0280: 8086:4237
/sbin/lspci -nnk
Code:
03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh]
Network Connection [8086:4237]
Kernel driver in use: iwlagn
Kernel modules: iwlagn
dmesg
Code:
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
phy0: Selected rate control algorithm 'iwl-agn-rs'
firmware: requesting iwlwifi-5000-1.ucode
The dmesg output shows firmware request (highlighted with red font), but I have already installed the firmware using YAST.
View 2 Replies
View Related
Mar 23, 2010
my wireless will connect to a well known connection but will sometimes drop the connection then tries to reconnect. Sometimes it will reconnect w/o a problem but most times it will fail and when it fails it will refuse to even recognize that same wireless connection.
If by a small chance it does recognize the network then when you click on it, it will ask you again for the password, which is already saved onto the computer. After entering the password it will try to reconnect, then fail.
Only solution is to reboot.
I was wondering if there was an easy temporary fix of just reloading the software that controls the wireless.Such as, my audio doesn't work when I boot. I need to reload the ALSA driver using sudo /sbin/alsa force-reload
Is there something specific to the wireless that I can force-reload and it will start working w/o having me reboot my PC?
View 6 Replies
View Related
Jan 9, 2010
Is there a way to automatically set the wireless settings for all of the accounts on the system? If I change the encryption key, DNS settings etc, I like for them to be global and not have to have the other users (my kids) have to change settings (or bypass settings).
View 1 Replies
View Related
Sep 11, 2010
I got this Acer Revo 3610 nettop about a week ago. I got it to use as an htpc, and decide to do an install of xbmc live on it. I have everything set up the way I want it at this point, but I'm stuck on trying to configure the wireless.
I'm not sure where I should start troubleshooting this thing, but something about this seems off to me.
Code:
xbmc@XBMCLive:~$ sudo -s
root@XBMCLive:~# iwconfig ra0 mode Managed
root@XBMCLive:~# iwconfig
lo no wireless extensions.
[Code]....
View 7 Replies
View Related
Dec 8, 2010
I first want to say that I am very new to Ubuntu so please forgive any ignorance I have successfully given internet access to my xbox by connecting it via crossover cable to my ubuntu 10.04 laptop and given the eth0 settings "share with other computers" My issue is that the ip address being given to the xbox is 10.42.43.10
How can I change this ip address given, or use a static ip address (ie 192.168.x.x) because using this ip address keeps my xbox from accessing windows shares on WORKGROUP on my 192.168.x.x network.
View 1 Replies
View Related
Mar 28, 2010
I have tried various rules, like opening port 53 for the DNS with little success. I finally figured that you need to set the source port to 53 and NOT the destination port.However, I have been unable to figure out what ports apt-get requires. The only way I get it to work is to accept everything in iptables.
View 1 Replies
View Related
May 29, 2011
Well when I first installed fedora 15 my wireless internet was working fine, and then out of the blue the option to select a wireless network wont show up.
Im sorry to be one of those people who register and there first post is a question, but since fedora 15 is new I couldnt find any information on my issue.
So basically, If I go into Network Settings I have two choices in the left hand tab. Wired, and Network proxy. Yesterday I also had wireless, Since the issue I have updated everything but still have no luck.
I am having this issue on a emachine em350 netbook, I am unable to post a link to it as I get a error since im new and not allowed to post links.
View 5 Replies
View Related
Jun 9, 2010
I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
View 1 Replies
View Related
Feb 17, 2010
the default for /etc/network/interfaces? I believe I screwed it it up because I can detect my wireless, it just won't allow me to connect to it. The settings in the /etc/network/interfaces are all messed up. I'm running Ubuntu 9.10.
View 2 Replies
View Related
Jul 27, 2010
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
View 12 Replies
View Related
Mar 5, 2010
I didn't find a solution to making my 3G/GPRS "modem" reconnect automatically when the connection fails, so I made a solution of my own. It's very annoying when you're downloading a file overnight, only to find that the connection has failed 5 min after you went to sleep.Restarting the NetworkManager daemon makes it automatically connect to all configured interfaces, including 3G/GPRS, so I made a simple script to do that.First, we check if the modem is even connected. Replace Huawei with the brand you're using. Any unique word on the line in lsusb will do fine as well. Then we check if the connection is up, and if it is, we simply exit. Otherwise, the NM daemon is restarted, which causes the 3g/gprs to reconnect.
View 2 Replies
View Related
Nov 27, 2010
i use ppp to connect to a VPN, and i need it to auto reconnect when i looses connection. How do i make it work?I use Debian.
options.pptp settings:
lock
noauth
[code]....
View 1 Replies
View Related
Jan 29, 2010
wireless disconnects after a few hours, there is a 50/50 chance that the reconnect fails. if it fails i am asked for the wpa2 key, if i hit cancel and try to connect manually after 2 minutes it connects most times. if i enter the wpa2 key and hit connect i won't get any connection. reading the loglife of my router shows that my laptop connects and disconnects in a 7s rhythm. a restart solves this problem (is there a command to manually restart the network without the need to restart?
laptop: packard bell easynote w1000
ubuntu 9.10
lspci -v readout:
Code:
Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
Subsystem: RaLink Device 2560
[Code]....
probably related, after suspend or hibernation networking is disabled, enabling it via right-click does not work again after a restart everything works how it should.
View 4 Replies
View Related
Sep 21, 2010
I just started using Ubuntu at the advice of a friend. I am running it from a flash drive.I have a wired network that always works fine with Windows on this computer.After starting up Ubuntu it connected right up and I was able to use it. Then, out of the blue the machine shut off. Upon restart, I was unable to connect to the internet.I reinstalled Ubuntu to a different flash drive and it worked fine once again.I left the computer running while I went out for supper, returned and the computer was "asleep" and would not wake back up.I shut off the computer and restarted Ubuntu.No internet again. As always, it works fine in Windows.Also, BOTH times this has happened, the OS says I am connected to the internet, and I can turn the connection on and off, but it is not connected. This happens even if I reboot the computer. (I have a cable connection.)
View 2 Replies
View Related
Aug 16, 2011
Here is my problem:
I can reconnect to internet after disconnecting (this happens every 3-4 hours) only if I manually poke out and in ethernet cable to network adapter or reboot ubuntu. Even restarting network-manager not helps. My provider provides internet over pppoe. I have "DSL-connection 1" item in network managers gui menu. And that item disappears after disconnection.
pppd runs with following arguments: lcp-echo-failure 3 lcp-echo-interval 20 So where can I change this parameters, where is that configuration file?
View 3 Replies
View Related
May 3, 2010
I am using WICD as my wireless network manager and it works connecting to a network for the first time. But when I resume my laptop from hibernate or standby, WICD will not reconnect to the network and gets stuck on obtaining an IP address. And if I try to change networks without hibernating I get the same problem. Also, I notice that the network name is stagnant. I connect to multiple wifi networks a day because of school. When I leave my "home" network and connect to my "school" network WICD still says "Homebtaining IP address" even thought it should say "schoolbtaining IP address." My thoughts are that it isn't releasing the network properly and when its trying to connect it can't because it still thinks it's connected. The only solution I have found is to restart my laptop every time I want to connect to a new network, or shut down every time I am done using my laptop, which is a major inconvenience.
Here is what I am using:
HP tx2000
Broadcom BCM4322
Ubuntu 10.04
WICD 1.7.0
View 5 Replies
View Related
Oct 1, 2009
This is my startup routine:
I log on and Network Manager shows no wireless adapter.
I go to System > Administration > Network:
There are two entries in the Devices tab: Wireless and Ethernet
As soon as I double click the Wireless device and the configuration pops up, the device starts working (no changes to the settings are made)
I have the following set to ON:
- Controlled by Network Manager
- Activate device when computer starts
- Allow all users to enable and disable this device
View 7 Replies
View Related
Apr 18, 2010
Recently I've installed Ubuntu 9.10. I have DSL connection so, I wrote all details needed. After trying to connect on it, it automatically disconnects and connect auth connection again. I have worked on 9.04 and older versions and used to work very good, also the internet connection, but not in 9.10.
View 5 Replies
View Related
Nov 1, 2010
Running Ubuntu 10.10, and I can't get my WUSB100 v2 Linksys adapter to work. I've tried what's in this thread: [URL] Entered lsmod |grep rt into Terminal and found out it runs on the rt2800 chipset, so I blacklisted everything necessary. It finds and connects to my network but after about 10 minutes it disconnects and won't reconnect.
View 6 Replies
View Related
