Ubuntu Networking :: Netgear Adapter - Slow & Disconnects - After 5 Minutes

Nov 30, 2010

Just installed yesterday - and I love it so far except my wireless turns on for about 5 minutes, then disconnects.

In order to get internet back I have to either restart or uncheck "Enable Networking" and then recheck it.

I will try to provide as much information, but like I said I am new to Ubuntu and there is some things that are completely different from what I'm used to on Windows:

Wireless Adapter: Netgear RangeMax Next Wireless PCI Adapter WN311B

Additional Driver its Using: Broadcom STA wireless driver

Router: Netgear RangeMax

Information From "sudo iwconfig":

Code:

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: 10.04: Wireless Disconnects After A While With Netgear Wn111 V2

Apr 10, 2010

My wireless disconnects after around 10 minutes. It does not reconnect automatically. I've to pull out the usb dongle and then put it back in to connect again.

[Code]....

View 9 Replies View Related

Fedora Networking :: F13 KDE Intel 4965AGN Disconnects Every 10 Minutes

May 30, 2010

I have recently installed Fedora 13 on my laptop, an Acer Aspire One D150. The laptop has an Intel 4965agn wifi card which worked flawlessly under Fedora 12. Now however it keeps disconnecting every 10 minutes, even if I browse the web. On top of this, it also becomes very hot, so hot that you can feel it through the plastic case.

View 1 Replies View Related

Fedora Networking :: Manager - Nm-applet Crashes Regularly - Disconnects Every 10 Minutes

Nov 23, 2009

With Fedora 11, I got NetworkManager, and it never worked right.. Right now, the nm-applet crashes regularly, no message nothing, just disappears from the panel. I wrote a two-liner to run it in an infinite loop. But my wifi also disconnects every 10 minutes. It's like clockwork, it just disconnects. I see things about "error 38" in the logs. I tried downgrading, upgrading, nothing helped.

[Code].....

View 7 Replies View Related

Networking :: NetGear - WN111 V2 Usb Wireless Adapter ?

May 16, 2010

I'm running Slakware 13 (kernel 2.6.29.6) on a inspiron 1525. I use ndiswarper to use the BCM4312 wireless device without any problem but the fact that the driver does not support the Monitor mode. I therefore bought a NetGear WN111 v2 usb stick but I can't get the linux driver.

Even ndiswarper does not work but it's may be because I don't have the right .sys .ins files. (just to try)

So, I wonder if someone has already successfully manged this device working on Slackware 13?

Actually, I don't know if we can make lets say wlan0 and wlan1 working at the same time. I've try many drivers mentioned on Ubuntu forums but none of theme work with me.

Many people talk about wpa_supplicant but I don't know if I really need it to make my wn111v2 working. And what is a firmware?

View 2 Replies View Related

Ubuntu Networking :: WUSB100 V2 Adapter - Disconnects And Won't Reconnect

Nov 1, 2010

Running Ubuntu 10.10, and I can't get my WUSB100 v2 Linksys adapter to work. I've tried what's in this thread: [URL] Entered lsmod |grep rt into Terminal and found out it runs on the rt2800 chipset, so I blacklisted everything necessary. It finds and connects to my network but after about 10 minutes it disconnects and won't reconnect.

View 6 Replies View Related

Ubuntu Networking :: Can't Get Wg111t Netgear Wireless Adapter To Work

Mar 5, 2010

i can't get my wg111t netgear wireless adapter to work. I followed the help thing by installing ndisgtk, which installed successfully. I was able to load up the file on the cd that also the help page said. The problem is that the computer won't load up the adapter as it would load up my cd's and flash drive. Here's how i installed ndisgtk. I installed the files ndiswrapper_common, ndiswrapper_1.9, and then the ndisgtk_0.8.5.All of these were for i386.

View 1 Replies View Related

Ubuntu Networking :: Netgear Wireless N PCI Adapter WN311B-100NAS

Mar 24, 2010

I just bought a Netgear N PCI wireless network card and was hoping Ubuntu 9.10 would recognize it. I installed the card and was using XP on the machine (Dell Dimension 2400) and decided to install 9.10 on this computer instead (XP = slow!). I'm not sure how to get Ubuntu to recognize it. I was hoping this would be a 'plug and play' install

View 4 Replies View Related

Ubuntu Networking :: Netgear WNA 1100 USB WiFi Adapter Not Working

Jul 9, 2010

Okay I've got a Netgear N-150 WNA 1100 USB WiFi adapter, it doesn't work in Ubuntu it's not supported. There should be a way to make it work with ndiswrapper. I tried and failed before and due to other non related circumstances I had to reinstall Ubuntu. What are the steps to install ndiswrapper and it's dependency's on a fresh Ubuntu installation that cannot connect to the internet.

View 9 Replies View Related

Ubuntu Networking :: Access The Internet With A Netgear WPN111 Usb Adapter?

Feb 3, 2011

Is there anyway for me to access the internet with a Netgear WPN111 usb adapter

View 1 Replies View Related

CentOS 5 Networking :: Netgear GA311 Gigabit PCI Adapter

May 16, 2009

I have a Netgear GA311 PCI Gigabit Adapter. Any chance it might work with CentOS? It is not one of the cards listed when I do "NEW" Ethernet Adapter from the System Network menu. Maybe there is compatible choice?

View 5 Replies View Related

Fedora Networking :: USB WiFi-N Adapter Disconnects Fc14 64-bit

Nov 27, 2010

After a new fresh-from-DVD install of Fedora 14 64-bit (over top of Fedora 12 64-bit which went over top of Fedora 10 64-bit before that) my Linksys WUSB600N adapter connects at login to my WiFi N router with WPA2 Personal.

That is great, as previously (fc10/12) I had to use the Ralink drivers per ogetbilo's thread on this forum (that thread kept me on the net for many years now). And at some point this even became a pain because sometimes the system would boot and refuse to connect to the wireless (which would hang trying to connect) and then crash to a dump screen on shutdown (bug reported). The fix was hoped to be found in upgrading to F14 and the newer kernels with working native Ralink chip support.

But I still have an issue... the connection stays up for a few minutes then drops. If I disable/re-enable wireless it (at least sometimes) re-connects. But obviously that is not workable. This is a USB adapter and I am not entirely sure that there is not some USB powersave issue going on, but I do not see anywhere to disable system USB power saving either.

View 1 Replies View Related

Fedora Networking :: Netgear WG111v2 Wireless Adapter Won't Stay Online

Jan 28, 2010

I just installed Fedora 12 on my HP a430n PC.I used to run Fedora 10, then moved to Linux Mint 7, then to Ubuntu 9.10 and now I am back to Fedora because I want to become more adept with manual package installation and adding repos.When I ran Fedora 12 immediately after then install, before running yum update PackageKit or the software update, it would use my wireless adapter (Netgear WG111v2) and connect to and stay connected to a network just fine. No hiccups.After running the updates and restarting the computer, the wlan won't stay connected for longer than 20 seconds, which is frustrating when trying to install mp3 codecs.

This seems to be a bug in the latest driver update for the WG111v2, but I might be wrong. Anyone have a fix or a way to revert back to the initial driver (I don't know what the original wireless driver was called).

View 1 Replies View Related

Ubuntu Networking :: Xubuntu 10.04 IBM Thinkpad 390X Netgear WG511 PCMIA Wireless Adapter?

Jan 21, 2011

Edit: after upgrading everything using a usb to ethernet port converter ndiswrapper is working perfectly

I do not have internet access on a laptop I am trying to upgrade. It has no ethernet port. I may resort to buying a USB to ethernet adapter but I spent more than I would like to have already. I have tried every command in the HOWTO for wireless difficulties and posted the output.

[Code]...

View 4 Replies View Related

Ubuntu Networking :: Plug In Realtek RTL8187 Wireless Adapter Disconnects Automatically Randomly

Feb 3, 2010

When I first turn it on to the desktop, it automatically connects and disconnects automatically 5 times then sometimes it would disconnect a few times randomly out of the blue.

This ia an external single usb wireless adapter you plug in the usb port on my desktop tower.

View 1 Replies View Related

Ubuntu Networking :: Alfa Network AWUS036H USB Adapter Chipset Realtek 8187L Disconnects

Sep 13, 2010

I have Ubuntu 10.04 (32 bits) and a wireless usb adaptor Alfa Network AWUS036H with Chipset Realtek 8187L. After a few minutes connected, the adaptor disconnects and I can't reconnect again. I search this forum but I'm not sure about what to do. Do I need to get and install another driver? I need to use the windows driver?

View 5 Replies View Related

Ubuntu Networking :: Slow Connections - Disconnects After 1 Min - Connect To Networks But Can't Surf

Mar 26, 2010

i have ubuntu 9.10 on a lenovo s10. i had my alfa awus036h and it worked fine no issues. except for having to reconnect every hour or so. anyway i got back track 4 final and installed it on usb with unetbootin. i started to use wicd and etter cap on it. and i made sure to turn off wicd when i was done then i went back into ubuntu (i didnt install bt) and i started to have problems like everyone else. slow connections ,disconnects after 1 min, and can still connect to networks but cant surf.

View 1 Replies View Related

Ubuntu Networking :: Connection Stop Working With RTL8187 Wireless Adapter After Few Minutes

Feb 4, 2011

I buy a new usb network adapter (Through DX), when I try to use it in ubuntu or BackTrack4 Final it is working, and connecting networks even with WPA encryption. But after few minuts it stops working totally. It is showing that I'm connected to the AP but web sites do not respond.

Notes:
- I have another PCI Wireless adapter which works fine.

- The problematic adapter works great on windows.

- A driver CD came with it, including a linux driver which I wasn't succesfully installed.

- A BackTrack3 Disc came with it, claming by the instructions that the adapter will work with it. I didn't try it because i have backtrack 4 final.

It took me dozens of surfing the web hours, and too many restarts,

View 2 Replies View Related

OpenSUSE Network :: DNS Settings And The Internet Connected, But Without The .exe Program It Just Disconnects After 10 Minutes?

Sep 13, 2010

i just installed open suse 11.3 after using linux mint 7(based on ubuntu 9.04).i am currently using two internet connections at home, the first is a vodafone mobile modem, which is workind excellent, and the other is a LAN network, that on windows uses a *.exe program to run. i managed to make all the IP, NETMASK, DNS settings and the internet connected, but without the .exe program it just disconnects after 10 minutes.this is the same thing that happens with the connections on windows if i start the computer and not run the "net.exe" program, but if that program is running the internet connections works just fine. i tried using wine to run net.exe, but it just gives an error message.

View 5 Replies View Related

Fedora Networking :: Worthless Wireless Connection \ Works Well For A Few Minutes Then Has A Period Of Inactivity - Then Slow?

Nov 24, 2009

I'm running Fedora 12 on an Acer Aspire One with KDE. The built-in wireless works without a problem EVERYWHERE except at work. It's a shared wireless connection using WPA/WPA2 security.I can connect but it's "hit-and-miss" if I can do anything with it. Somedays it works well for a few minutes then has a period of inactivity - then slow - randomly receives...It worked flawlessly when the computer was running Windows7 no one else has connectivity issues but I'm the only one using Linux.

View 2 Replies View Related

Debian Hardware :: Netgear USB Adapter Can't Connect

May 2, 2014

WG111v2 USB that works just fine on my Ubuntu 12.04 Dell can't connect on my Debian Gigabyte. It finds the network name just fine, remembers its password, and tries to connect 3 times before giving up. This tower is 4 days old, as is the OS.

View 1 Replies View Related

Ubuntu Networking :: AWUS036H - RTL8187 Wireless Adapter Slow

May 29, 2010

This is wireless adapter: [URL]... USB/Detail.bok I have 2 AWUS036H Wireless USB adapter that uses the RTL8187 Chipset connected to a USB 2.0 Port. It is very slow when I try to go to websites or download anything using Ubuntu 10.04 Lucid Lynx. The max speed I can get out of it is 135 Kilobytes per second when downloading anything. But when I am on Windows I can max out 2.6 Megabytes per second. I have been trying to find a solution but have found none. When I look at the light on the wireless adapter and compare it to what it looks like on both Ubuntu and Windows. It seems that the wireless adapter light is dimmer on Ubuntu. So I was thinking it was txpower set very low. I changed it but no success on changing speed. I am using WPA2-PSK which obviously uses AES. I have also tested it while it is in WEP and when it is Open with no change in speed. Speed results Ubuntu 10.04: Speed results Windows 7: I changed the settings to Megabytes on those speed results.

[code]...

View 3 Replies View Related

Ubuntu Networking :: Slow Wireless With USB Adapter RTL8187 - Make It Up?

Aug 29, 2010

Ditching Windows for the last time but this seems to be a issue wireless seems fine for a bit but then the connection slows to around 20kbps or worse. Any ideas what it could be? Using 10.04.1 it says it has a 48mb connection and i have 4 bars.

Bus 001 Device 005: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter code...

View 9 Replies View Related

Hardware :: Netgear WG511v2 Wireless Adapter - Almost Working

Dec 17, 2008

Running HH on a little Toshiba Satellite something-or-other laptop (I want to say A25, but who knows), Verizon FIOS router (wired and wireless).

NetGear WG511v2 adapter is so close to working...

Didn't seem to want to work with ndisgtk, so I ran ndiswrapper from terminal, using driver folder I copied from my Win2K partition.

(Had to do a cp WG511v2.sys WG511v2XP.sys, as the .inf file referred to the latter, but such did not exist; cp seemed to do the trick.) And now, survey says:

Code:

Code:

Code:

In "Network Settings", the card detects a few wireless networks (including my own in-home router). Status LED flashes constantly (which I interpret to be hunting), and every several seconds, it goes solid while activity LED flashes a few times (which I interpret to be finding a network, attempting communication), then activity LED ceases to flash and status LED goes back to flashing (which I interpret to be failing and going around again). Using DHCP, just like the other computers that connect without incident.

I have entered my WEP every way I can think of. The dialog lets me choose WEP ASCII or WEP hexadecimal; I have entered the key in all caps and in lowercase, as ASCII and as hex, have entered 0's and O's where applicable. No combination seems to allow it to actually communicate with my router beyond getting rejected. My other laptop and PC (and this laptop, when running Win2K) all connect just fine; none of them use WPA-type passphrases, so I assume that's unnecessary from Ubuntu. Roaming mode gives the same results as described above.

View 5 Replies View Related

General :: Install The Netgear Wireless Adapter Driver?

Dec 23, 2009

time Windows user here; limited line command experience from early computer learning; Just wiped my drive and installed Ubuntu. How do I install a driver for the netgear wireless adapter - it was already installed in the machine. I've downloaded the driver believed to work. What next? Also, any instruction on educating myself on Linux/Ubuntu basics?

View 14 Replies View Related

Ubuntu Networking :: WUSB54G V4 Wireless Adapter - Continues To Slow Down To Crawl

Sep 6, 2010

I have a number of computers working just fine on my wireless network so I don't believe it is a router issue. I am running 10.04 on a dell gx280. I plug in the WUSB54g and ubuntu sees it and it connects to the internet just as it should. I can surf the internet thruough different browsers, and although a little sluggish, it works just fine. The problem is when I download a file. It starts out working as it should but continues to slow down to a crawl. Update manager had a 54MB update, it started out downloading, but then said it would take 2 hours so I just cancelled. I have several WUSB54g's and they all have the same issue. I changed to a different type of adapter, and the update manager only took a couple of minutes.

View 3 Replies View Related

Fedora :: Unable To Configure Netgear WG111v3 Wireless Adapter In KDE?

Dec 31, 2010

I recently installed Fedora 14 and am unable to configure my Netgear WG111v3 wireless adapter in KDE However XFCE and Gnome work fine. Has anybody had this problem?

View 1 Replies View Related

Ubuntu Security :: WNA 1100 Netgear Wireless Adapter Monitor And Injection Mode?

Mar 2, 2011

I want to do some pen-testing using aircrack-ng on my local network and currently the only wireless adapter I have is the WNA 1100 netgear adapter. I am using the ath9k_htc driver.

View 7 Replies View Related

General :: Internet Connection - Netgear WPN111 Wireless Adapter Work With 10.10?

Dec 28, 2010

Will the Netgear WPN111 wireless adapter work with Ubuntu 10.10? If so what action is required to get connected with it running Ubuntu 10.10. The adapter works with Windows XP.

View 2 Replies View Related

OpenSUSE Install :: WPN111 Wireless Adapter And NETGEAR - Make The Module Load Automatically On Boot ?

Feb 14, 2011

Above adapter can be installed on v10.2 and 11.3 using ndiswrapper:-

1. Copy the 3 driver files from Windows:- like netwpn111.inf, WPN111.sys & ar5523.bin.
(Be carfeul about the exact names, because they have changed over time).

2. sudo ndiswrapper -i netwpn111.inf

3. sudo ndiswrapper -m

4. sudo modprobe ndiswrapper (the adapter should light up at this point and networks will be detected shortly after - see network manager). (Be careful of paths here - e.g. I had to use /sbin/modprobe - so 'whereis' may be necessary to find these commands).

2nd When I reboot, I need to run the modprobe command again. How do I make the module load automatically on boot? Also (and this is minor), can I bypass the KWallet, keyring thing? it seems silly to enter a password for the keyring and then click another password dialog, when I can just as easily enter the password for the network itself.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved