Ubuntu Networking :: Virtualbox Shares In One Direction Only?
Mar 17, 2011
I have been pouring over pages from some days over this one and come to my end.I have Meekat Guest, Xp host on Virtualbox; set up for folder share on virtual networking.Xp can see Linux shared folder, can withdraw to itself, yet cannot deposit to shared folder; error received "Disk write protected or in use"Linux access to 'workgroup' - xp machine is seen yet when clicked on returns the error of"Unable to mount location - failed to obtain share list from server"smb call from Host returns "Connection to STENCILCUP failed (Error NT_STATUS_UNSUCCESSFUL"
I run opensuse 11 at work. I'm trying to see the list of shares on a "server" that is running windows server 2000. If I try smb://server, it doesn't show any shares, but I can browse directly to it such as smb://server/share1. If I use smbclient, it returns the list of shares correctly. I guess I just don't understand why smbclient shows the list of shared folders, but nautilus cannot.
I have laptop with Ubuntu wired to ferdora 12 server. Server RDP control to desktop is working.Laptop to server is not.See screen shots.I am thinking VNC server is not installed or configured properly on server.
I'm currently setting up a squid proxy which will be installed on a debian system configured as a bridge eth0/eth1 as br0. The problem I'm having is that port 80 requests are being proxied both ways where I only want the requests coming in via eth1 to be proxied.
Is there a way to do this? I've already tried changing the "-i br0" in the iptables redirection to "-i eth1" but no data appears to go through it.
I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares. 2. Scheduling backup of some mount points with rsycn to store data in remote hard disk 3. User and group administration, with sudo access. 4. Creating and Managing Xen Virtual machines and giving access to other project teams. 5. Automating some tasks with Shell Scripting. 6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
I can't seem to find anywhere that allows me to change the direction in which text is displayed/entered. I'm trying to change from "left to right, top to bottom" to "top to bottom, left to right".
I have an old Logitech Wingman analog joystick connected to a game port on a Creative sound card. At this point I've got the system to see the joystck and was able to run jscal. I was also able to run jstest. I was able to see positive & negative numbers moving the joystick in four directions. However, when I try 2 different MAME games or Open Arena there is no right direction. Pushing the joystick right only stops it from going left.. Up and down movement seems to be OK.
Can someone point me in the right direction for adding SSL to a webpage?I've installed Phpmyfaq, on an Ubuntu 9 server, but I want to set it up so that logging in is done securely.
initiated update. Grub update required user input. The 'help' message is incorrect. Attached is a .jpg of a Grub message during the upgrade. Question: how does this get corrected? I would post an alternative wording but honestly,
If the arrowhead points up, the standard behavior is to sort with lower values first and higher values later. In my ubuntu install, it does the opposite. Names and dates sort descending when the arrow points up.
Running RHEL5.5 on a Dell R710 server. I installed a 2-port PCIe serial card, built the driver, and installed the kernel module. The ports show up in /etc/hwconf, lspci, kudzu, /proc/ioports, etc., and I now have two new device entries...
/dev/ttyE0 /dev/ttyE1
When I connect a null modem cable from port 0 of the card in the new computer to serial 0 of another computer, I can receive text from the other computer. When I do this... code...
I tried to set up NFSv4 with idmapd between two Debian/lenny installations. On the client, the user "xyz" has the UID 501 and on the server "1000". Changing UIDs and setting up NIS is not possible, Kerberos unwanted. I tried to set up NFSv4 with idmapd and it is only working from server to clienthen I list directories on the server, belonging to the user "xyz/1000", the owner is correctly displayed on the client as user "xyz/501". But when I create a file on the server, it is created with UID 501 (should be 1000). The configuration is quite standard, idmapd.conf was generated automatically, NEED_IDMAPD is set to "yes" and starting properly.
The main exporting directory has following options in /etc/exports: rw,fsid=0,insecure,no_subtree_check,sync and the mounted directory has:
I've been using Ubuntu for about 6 months now, but haven't had a need to start scripting until just recently. I know programming basics, but that's about it.Anyway, I have a program that I would normally run in this manner (note that I didn't create a permanent alias because I've been moving the program around a lot):alias dx='python /path/to/dxProgram.py' dx A_input.dx B_input.dxSo, you see, program dx takes two input files, and 'A' must come before 'B'. I have a folder full of these types of files that I'd like to loop through with this program. They're named as follows:
im trying to learn javascript. so i choose to start out making a image slideshow banner that auto scrolls on load no special buttons. so since i had no idea were to start i found code that was free to use commercial and non commercial and ill be able to change it. heres that code:
both are running 9.04i have samba installed on both, each computer can ping the other, they each have a folder that is being shared, and they each can see a third computer that has windowsxp on it. however, they cannot see each other.not really sure what is going on.went to places/network and nothing shows up except the windowsorkgroup/computer.
Simply share a printer in a small, secure home network spread over 5 or 6 machines running mostly windows (98 through Win7) but using the UBUNTU box as the host for the printer.
The network has basic connectivity. I have no problem pinging any box from any box. Or surfing from any box.
From UBUNTU box, can see and browse Windows Workgroup no problem.
Windows machines see the announcement of UBUNPRIN but cannot connect. Cannot seem to authenticate. I'm thinking that I have the share set up with NO security.
security = SHARE
And
map to guest = Bad User
Adding some terminal output and the smb.conf file...
I'm having a bit of an issue. I have 7 HDD's shared over Samba from a Ubuntu 9.10 server. I'm having trouble getting access to them on all my pc's except for 2(out of the 4). On all the pc"s I get this when I type this command smbtree,
WORKGROUP \UNIVERSE universe server (Samba, Ubuntu) cli_start_connection: failed to connect to UNIVERSE<20> (0.0.0.0). Error NT_STATUS_UNSUCCESSFUL
I work with modbus protocol(MODBUS/TCP to MODBUS/RTU gateway server) and write a program for work with mbusd. when working with usb to serial adapter and cable, my program works without any problem. but when working with serial cable does not work (without usb to serial adapter) ; when mbusd is runing and i run minicom program in part initializing modem my program works and when minicom lock the serial port my program stop. when close minicom "with no rest modem" (ctrl+a and press q) modbus program and my program works without any problems.
in builder site (mbus.sourceforge.net) posted : note that currently mbusd can't operate with RS-232/RS-485 converters with direction switching by RTS pin. Use converters with automatic data direction control (i.e. Moxa Transio series).
why do we have to define both Source/Destination AND Direction when building firewall.Isn't direction= source->destination? what would happen if source and destination were swapped?
I've recently switched to Ubuntu from debian, and I'm now running a fresh install of 9.04 32 bit. I have a Windows XP media computer which I would like to be able to browse using smb://. This worked fine on my debian system, but I cannot get it to work on ubuntu. The windows XP machine has a couple of shares, e.g Music. I can access the Music share via smb://, but I cannot write to it. Nautilus just says "Permission denied". I can also see the default shares, e.g. E$, but if I try to open them I am prompted with a password, but no matter what I enter it seems to have no effect. How to proceed?
I'm running Ubuntu 9.10. I am hooked into my home network with several windows machines attached. On a daily basis I browse the network and use network shares. Today, I can't. Today I can't see any other machines from ubuntu. I haven't changed any settings in Ubuntu, and nothing has been changed on the network, but yesterday it worked fine and today it doesn't.
i have 3 ubuntu machines running 9.10. All of them are running SMB so that the Windows machines can access the shares on the Ubuntu machines, but the ubuntu machines can not access shares on the Windows machines. When I click to connect to a windows machine ( all of them running XP), it says "connecting to COMPUTERNAME.." It never opens the computer, and it always comes back with an error saying that it failed to connect. I haven't been using ubuntu for very long, so im not as savvy with it as I am on windows. All windows machines can see all ubuntu shares, just not the other way around and I'd like it to be both.
My university has a central leased line that is split into wired and wireless. While plugged into the wired network i can access all the windows shares. However when on the wireless network, i cant access the wired shares. Windows laptops can however access them, but directly entering the share name ( \share-name)
I have an Ubuntu 9.10 Samba file server. I have set up Ubuntu 10.04 netbook remix in a home network which also has Windows XP home and Vista computers already present in the network. The XP and Vista machines have no problem accessing the file shares.
The server is running mhddfs with FlexRaid. The security is set to share level access. I have a hosts allow line in the smb.conf file to permit access to certain IP addresses and have added the 10.04 netbook remix IP address to this hosts allow line.
I cannot access shares from the 10.04netbook remix machine if the hosts allow line is active, but have no problem from the windows machines. If i comment out the hosts allow line, all machines can access the share, including the netbook remix machine. I am fairly new to Linux and would appreciate any help in solving this problem.
Where are the mount points for smb shares connected via "Places -> Connect to Server"? I assumed them in one of the usual places like
/mnt or /media
but these folders are both empty. There are a couple of applications which are not capable of accessing my shares because i can't navigate to the right location...
I am trying to access a shared printer connected to my Win7 PC from a laptop running Lucid Lynx. I have Samba installed and configured okay (I think) and I can browse the Ubuntu laptop from Windows but when I try to access shares on the Win7 machine I get a message NT_STATUS_UNSUCCESSFUL.
I've reviewed the security settings on the Win7 machine and tried turning off the firewall. I can see the Win7 computer on my network and ping it from the Ubuntu laptop but I cannot access shared folders or the printer.
At, or around, the time of upgrading from Lucid to Maverick, shares on some of my nfs servers have become inaccessible:
Code: peter@Desktop:~$ ls /net/10.2.1.21/ opt peter@Desktop:~$ ls /net/10.2.1.21/opt/ sybhttpd
[Code]....
The share is hosted on a PopcornHour Network Media Tank, running a Linux system. With Lucid, I was able to access the share without any problems, both in Nautilus and from terminal. I can still access the share from other nfs clients - it's just ubuntu/Maverick which exhibits this problem. I have tried reverting to older firmware on the PopcornHour but that doesn't make any improvement.
Was there some significant change in nfs with the Maverick release, or have I misconfigured something?
Running Ubuntu 10.10 M-M..Running Network, my machine sees my Windows Workgroup, and even the machines on the workgroup. When I try to access those machines, I get a message "Failed to retrieve share list from server." I've been able to mount other machines by using straight IP accesss, but that is of little use since IP addresses are not Static.
I have setup Samba shares on my Ubuntu 10.10 and assigned different different username and password combination for each share.
The sharing works perfectly fine on all the Windows machines but it does not work on OSX. When I try to connect using OSX, it ends up showing waiting icon (screenshot attached) after entering username and password. (It asks for the login details after selecting the share from the list)
Following is my smb file content:
Code: # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the
