I'm having a bit of an issue. I have 7 HDD's shared over Samba from a Ubuntu 9.10 server. I'm having trouble getting access to them on all my pc's except for 2(out of the 4). On all the pc"s I get this when I type this command smbtree,
WORKGROUP
\UNIVERSE universe server (Samba, Ubuntu)
cli_start_connection: failed to connect to UNIVERSE<20> (0.0.0.0). Error NT_STATUS_UNSUCCESSFUL
[code]....
My Pug Server has worked faithfully for many years just sitting in a closet. It is designed wo that you never need to add a monitor or keyboard as it is administered through a web interface. Recently it had a problem with the motherboard and I had to replace it, but the machine is now working. However, it no longer is visible as a network drive on my Windows machine.Unfortunately I have no idea where to start looking to see what the problem is. I did attach a keyboard and monitor and logged on, but everything looks okay (I can see my files, etc.).
This is an old machine (c. 2003), so has an old version of Linux (I have no idea what version, or even how to find out). Since it is never meant to be used directly it doesn't have any GUI installed, so I have to do everything using command line.Does anyone have any suggestions as to how I can even start to determine what the problem is or how I can go about trying to fix it? At this point I would be happy just to get the files out and replace it with a newer NAS.
I run opensuse 11 at work. I'm trying to see the list of shares on a "server" that is running windows server 2000. If I try smb://server, it doesn't show any shares, but I can browse directly to it such as smb://server/share1. If I use smbclient, it returns the list of shares correctly. I guess I just don't understand why smbclient shows the list of shared folders, but nautilus cannot.
View 3 Replies View RelatedI have an Ubuntu 9.10 Samba file server. I have set up Ubuntu 10.04 netbook remix in a home network which also has Windows XP home and Vista computers already present in the network. The XP and Vista machines have no problem accessing the file shares.
The server is running mhddfs with FlexRaid. The security is set to share level access. I have a hosts allow line in the smb.conf file to permit access to certain IP addresses and have added the 10.04 netbook remix IP address to this hosts allow line.
I cannot access shares from the 10.04netbook remix machine if the hosts allow line is active, but have no problem from the windows machines. If i comment out the hosts allow line, all machines can access the share, including the netbook remix machine. I am fairly new to Linux and would appreciate any help in solving this problem.
I'm trying to setup two samba shares on ubuntu server 10.04.1 lts x64
The first is a Read-Only share for windows users that doesn't require a password. This i've managed to do so far.
The second is a Password protected Upload share. So far I am able to have both shares (which access the same directory) but am unable to log in to the pass word protected share.
I know i'm not doing things quite right, and would like a little bit of help
The smb.conf file is the default ubuntu file with these added shares:
Code:
[NAS]
Comment = Network Attached Storage
path = /media/RAID/NAS
browseable = yes
[Code].....
My question is that I have a handful of servers, Server 1 is a Suse Linux machine and Server 2 is a Windows Server 2003 machine. I can mount and access the files/shares on the Linux machine no problem but when I come to using the Server 2003 shares I encounter problems ... here is a snip of my fstab ...
Code:
//10.0.0.20/applications /myfolder/applications cifs username=user1,password=pass1,auto,uid=user2,gid=group2,0 0
user1 and pass1 is the username and password of a user (local to the remote machine) and user2 and group2 are taken from the machine performing the mount.
Am I doing it right, is that how I should be mounting a share from a (Domain enabled) Windows Server 2003?
I have a problem with 'Samba' shares on Ubuntu 8.04. Bringing shared folders over from Windows (on another computer) is not a problem...until I try same process with a Windows backup folder holding .tib data from an 'Acronis' backup.The files appear in Ubuntu Network, everything looks o.k., Ubuntu just won't copy the data to another folder. Other shares work without a problem, its only with these ':.tib' data.
View 3 Replies View RelatedI want to connect my linux laptop (Mandriva 2008.1 x86_64) to my windows small business server. My issue is that I am not sure what I can and can't do in terms of any windows config changes. Can linux (I assume using Samba) connect normally?
View 2 Replies View RelatedI have the follow environment
PDC SAMBA + OPEN LDAP (ubuntu 9.04)
Linux (File Servers) + Windows machines all working well
I'm trying to set up a share drive on my new server using ubuntu 9.10 with samba (v 3.4) and ldapclient and the shares are not working when I defined Valid Users for share folders, that keep me ask me about my user and password, on the logs I have:
[2010/03/15 10:24:10, 1] smbd/service.c:676(make_connection_snum)
create_connection_server_info failed: NT_STATUS_ACCESS_DENIED
This is my smb.conf
[global]
workgroup = FLOWCONNECT
server string = OSLO SAMBA FILE SERVER [code].....
I have the same set up on my File Server (Ubuntu 9.04) which use samba 3.3 is working fine.Someone know if has some different setting between samba 3.3 (ubuntu 9.04) and samba 3.4 (ubuntu 9.10) that could cause this problem ?
I have beating my brains out trying to get Lucid Lynx connected to an SME Server 7.4 to automatically mount windows shares. The winbind stuff seems to work okay after I installed a restart script in /etc/network/if-up.d (kudos to OsGnuru & bobpaul for that) There is a short wait on network up before winbind can validate but that is not a show stopper. I have looked at (what I think) is the correct log for pam_mount and it seems to be running through to the end process okay. It looks like it is either not reading the pam_mount.conf.xml file or I have not configured it correctly as it just reports "No Volumes to Mount". I have appended the log file, pam_mount auth, password, session & common conf files as well as the pam_mount.conf.xml file for review.
View 1 Replies View RelatedI have a fileserver that I want to share out samba shares. However, i configured samba to have another netbios (SAN) and my windows box still sees whoopn-SAN which is the name I gave to my server when i installed it. Now I am using 9.10 and I know that i can create a share from the gnome gui in nautilus and that appears to be a windows like share. How can I turn OFF the windows like shares that ubuntu does out of the box and use ONLY samba? I ask because there appears to be a conflict of permissions b/w samba and this stuff.
View 7 Replies View RelatedThis one has proven to be a real for me. On one of my Samba shares on my server I have a folder of mp3 files of my CDs. The one I am having an issue with is "Clarence Carter/Dr. C.C." (yes, the one with the ULTIMATE party song). The "Dr. C.C." folder name is normal locally, but across Samba it comes out "DMOU3A~H". I can still access the folder this way, but it would be nice to not have Samba mangle the folder name this way. I am using Samba 3.4.2 on an Athlon64 X2 system running Slackware64.
View 2 Replies View RelatedIt's been awhile since I posted anything which is a good sign my install has been working well and I have been able to handle most everything. However, I'm not able to handle this issue. I recently installed F11 and everything went well. But, when trying to see my other computers on the local network, I cannot. I receive this error message: Unable to mount location Failed to receive shared list from server. I understand the message as it is obvious, but do not know how to fix it.
View 14 Replies View RelatedI've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
I want to setup a Linux File Server for a small windows network (around 50 users). I do know that I am gona need Smb service/pkg for that. I haven't used Samba for a while now and as per the best of my knowledge, entire communication (including usernames and passwords) between a samba server & windows client machines will be plain text. Is there any way to secure all this communication??
Secondly, if i remember correctly, MS windows wont let me mount more than one samba shares as network disk when all my shares can be accessed by different smb users with different passwords?? is there a solution to this problem? OR may be if there is any other package available for this purpose so that i wont have to use samba?
I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares.
2. Scheduling backup of some mount points with rsycn to store data in remote hard disk
3. User and group administration, with sudo access.
4. Creating and Managing Xen Virtual machines and giving access to other project teams.
5. Automating some tasks with Shell Scripting.
6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
So I setup the newest Ubuntu on my old desktop on a 30g HD and have 2 200G HDs with a ntfs file system on those two. I got SSH and FTP configured, then went on to setup Samba.I have it (seemingly) set up well. /dev/sb1 gets mounted on /data1 /dev/sc1 gets mounted on /data2.I want anyone connected to my router to be able to see this machine and be able to read and write to both shares.
I configured WINS on my laptop to point to the linux box. and i've seen the pc in question (TECH-PC) in "My Network Places" on both of our laptops.Long story short, I try to connect to my network share and it says i don't have permission and i need to contact my network admin. This computer is the only one with Linux installed, the rest are windows-OS.Let me know if you need more info, pretty stumped here, have searched, read, scrapped my install and started from scratch, maybe i need to sleep on it
both are running 9.04i have samba installed on both, each computer can ping the other, they each have a folder that is being shared, and they each can see a third computer that has windowsxp on it. however, they cannot see each other.not really sure what is going on.went to places/network and nothing shows up except the windowsorkgroup/computer.
View 7 Replies View RelatedSimply share a printer in a small, secure home network spread over 5 or 6 machines running mostly windows (98 through Win7) but using the UBUNTU box as the host for the printer.
The network has basic connectivity. I have no problem pinging any box from any box. Or surfing from any box.
From UBUNTU box, can see and browse Windows Workgroup no problem.
Windows machines see the announcement of UBUNPRIN but cannot connect. Cannot seem to authenticate. I'm thinking that I have the share set up with NO security.
security = SHARE
And
map to guest = Bad User
Adding some terminal output and the smb.conf file...
Clip from log.nmbd:
If I use Nautilus server conect, I can see my NAS smb shares, but I keep getting asked for password and cannot get into these shares.If I do a mount on these same shares, as root, they mount no problem using same username and password.
View 1 Replies View RelatedFirst off a little history of me lol. I'm not completely a Linux noobie, but I'm not the most advanced user either. With that said I have a few interesting problems with Samba.First off I can see the NetBios name under Windows Networking (Windows 7), however everytime I try to connect to it I get an Access Denied and/or "Incorrect Password/Username" error. I have gone into secpol.msc and changed the values that other posts have suggested. Both the server and the workstation are located under the same group, and I have used the smbpasswd -a <username>. The server is not configured to be a Primary Domain Controller so.. I'm lost. Infact my brain hurts from 3 days of this. I have posted my SMB.CONF file to see if that helps. Hum.. Maybe I'm just trying to access a file share that isn't there..
View 13 Replies View RelatedStill new to Linux and especially samba. I have setup samba for 2 shares, will list below shares. 1 which requires a login and 1 temp folder which I would like guest access to. Currently I have security = user which works great for the data folder which requires a login. If I try to access temp I get asked for a user name and password as well. I tried to set security = share which then allowed access to temp with out a login but also allowed access to the data folder. From the data folder I emoved public = yes. I then get asked for a user name and password like I should but the system will not accept it. This is a Centos 5.5 server with a mail server on it.
[data]
comment = Data Folder
path = /home/data/
public = yes
writable = yes
browseable = yes
printable = no
avaliable = yes
write list = glenn,
force create mode = 0660
force directory mode = 0770
[temp]
comment = temp folder
path = /home/temp/
public = yes
writeable = yes
browseable = yes
guest ok = yes
guest only = yes
guest account = nobody
available = yes
force user = nobody
force group = nobody
As the subjects states, I cannot see my windows 7 shares from any of my *nix computers. I tend to over complicate things and I may do so here, but I want to try and be as thorough as possible in explaining the situation. I'll state w/ the basic layout of my lan code...
View 7 Replies View RelatedI have a samba server set up on my computer, and I can only access the shares over the network by loging in as my main user. This works for all shares, on any drive. When I log in using my fileshare guest account, I get the list of shares, but after selecting one to connect to, it gives an error that the server isn't available. Any share off the boot drive won't work. I don't know if it has to do with permissions, or it's a config problem.
View 5 Replies View RelatedWe have a samba server with a couple of shares defined as follows:
Code:
[Storage]
comment = Storage
browseable = yes
path = /home/samba
writable = yes
[Backup]
comment = Backup
browseable = yes
path = /mnt/hd2/home/samba
writable = no
[Administration]
comment = Administration
path = /home/adm
valid users = adm
public = no
writeable = yes
browseable = no
We have two samba users: samba and adm. The first is used to connect to Storage and Backup shares, and adm is used to connect to Administration share. There are two problems:
1) If Storage and Backup shares are connected to a Win7 box, the Administration share cannot be connected. All we get is an error saying that that share is already connected with different username.
2) We have managed to work around this by connecting the Administration share with the IP-address of the server instead of it's name(?!). The problem then becomes that sometimes connecting Administration share this way makes Storage share read-only. Not always though.
Wrong "security" type in smb.conf (was "user", needs to be "share"). For some reason the Storage share still occasionally gets connected read-only. Win7 also tends to forget the passwords/usernames for some shares upon reboot (not all of them, though).
I've recently switched to Ubuntu from debian, and I'm now running a fresh install of 9.04 32 bit. I have a Windows XP media computer which I would like to be able to browse using smb://. This worked fine on my debian system, but I cannot get it to work on ubuntu. The windows XP machine has a couple of shares, e.g Music. I can access the Music share via smb://, but I cannot write to it. Nautilus just says "Permission denied". I can also see the default shares, e.g. E$, but if I try to open them I am prompted with a password, but no matter what I enter it seems to have no effect. How to proceed?
View 8 Replies View RelatedI'm running Ubuntu 9.10. I am hooked into my home network with several windows machines attached. On a daily basis I browse the network and use network shares. Today, I can't. Today I can't see any other machines from ubuntu. I haven't changed any settings in Ubuntu, and nothing has been changed on the network, but yesterday it worked fine and today it doesn't.
View 2 Replies View RelatedSamba works fine over ethernet but over wireless i get nothing, i cannot even browse to smb://stargazer/ manually.
smbtree gives me this:
i have 3 ubuntu machines running 9.10. All of them are running SMB so that the Windows machines can access the shares on the Ubuntu machines, but the ubuntu machines can not access shares on the Windows machines. When I click to connect to a windows machine ( all of them running XP), it says "connecting to COMPUTERNAME.." It never opens the computer, and it always comes back with an error saying that it failed to connect. I haven't been using ubuntu for very long, so im not as savvy with it as I am on windows. All windows machines can see all ubuntu shares, just not the other way around and I'd like it to be both.
View 3 Replies View RelatedMy university has a central leased line that is split into wired and wireless. While plugged into the wired network i can access all the windows shares. However when on the wireless network, i cant access the wired shares. Windows laptops can however access them, but directly entering the share name ( \share-name)
I am using Ubuntu 10.04.
