Where are the mount points for smb shares connected via "Places -> Connect to Server"? I assumed them in one of the usual places like
/mnt
or
/media
but these folders are both empty. There are a couple of applications which are not capable of accessing my shares because i can't navigate to the right location...
Setup clients on a LAN to automatically mount NFS shares whenever the fileserver is up, without using autofs. Instead a simple bash script which checks if the server is up, and if the shares need to be mounted or unmounted is called by a custom upstart job. For a small office or home network populated with Unix-like computers (e.g., a few Ubuntu desktops or laptops and a fileserver), NFS (Network File System) is a good way to share storage space and centralise the backup of important documents. However, having a fileserver running 24/7 is often overkill for such a setup.
One way to have clients mount NFS shares automatically when the fileserver is turned on, is to use a package called autofs. Unfortunately, there are a few unresolved issues with using autofs in combination with NFS. In my case, when autofs tries to mount NFS shares when the fileserver is turned off, the Gnome desktop, and Nautilus in particular, becomes extremely unresponsive, regardless of the options used. Attempting to mount the share manually from the command line when the server is down however, does return a message of failure quite promptly, without hanging the desktop.
To solve this issue, I wrote a simple bash script that is run through the upstart system. The script simply checks if the fileserver is up, if the shares need mounting or unmounting, and then sleeps for a while before checking again. This works out quite well, so I decided to share this information in case someone else runs into these issues. PrerequisitesThis howto assumes that you have an NFS server set up with shares exported, and one or more clients capable of mounting those shares. For more information on setting up NFS shares and mounting them on a client from the command line, see: SettingUpNFSHowTo.
Clients should be able to ping the server to determine if it is running. Naturally, you need administrator access on the clients to install the script and upstart job outlined below. This script assumes that the directory paths of the shares match the location where they are mounted. In my case, the fileserver has two shares: /media/Storage and /media/Backup. On the clients these shares are mounted on the same paths. If your setup deviates from this, the script needs some modification. The script From the desktop of one the clients, paste the following bash script as a new file in your favourite text editor:
Code:
#!/bin/bash
# The hostname or IP-address of the fileserver:
FILESERVER="myfileserver.local"
# Check every X seconds (60 is a good default):
[code]...
Now adjust the FILESERVER variable. In this example, my fileserver is called myfileserver. By default, Ubuntu sets up your networking environment in such a way, that computername.local can be used to reach that computer over the local network, so the network name for myfileserver is myfileserver.local. Of course, you can also use the IP-address of the server. Next, change the MOUNTS variable to match the NFS shares exported by your NFS server. MOUNTS is an array; multiple entries are separated by spaces. So if you have one share exported as /media/MyShare, that line would look like this:
Code:
MOUNTS=( "/media/MyShare" )
An advantage of mounting shares in /media, is that they automatically show up as mounted drives on the user's desktop. Note that this howto assumes that you use the same paths for the share on the server and client side! Save the script to your desktop with an obvious name. In this example we call it mount_my_nfs_shares. Open a terminal and cd to the desktop. Make the script executable by calling:
Code:
chmod +x mount_my_nfs_shares
Next, move it to a place where it can be called by our upstart job, but also from the console to test. A good place to put such custom executables is /usr/local/bin.
Code:
sudo mv mount_my_nfs_shares /usr/local/bin
This script uses the logger command to tell the system's log what it is doing. To test this script, open up two terminals; in one, execute the following so we can monitor the log messages:
Code:
tail -f /var/log/syslog
In the other, simply execute mount_my_nfs_shares. If the script works, your shares should show up on the desktop and the computer:// location in Nautilus. If the fileserver goes down or becomes unreachable, the shares should disappear, and reappear when the fileserver comes back on-line. If this works, move on to the next step. Installing a custom upstart job The next step is to have the clients automatically run the above script when they are booted. We can use upstart for this. Create a new text file, and enter the following:
Code:
# mount_my_nfs_shares - mount NFS shares on fileserver, if present
description"Mount NFS-shares"
start on (filesystem)
respawn
[code]....
How the script works The script enters an eternal loop and keeps checking if it can reach the fileserver once every minute (unless you adjust the INTERVAL variable). If it can reach (ping) the fileserver, it checks if the mounts are already mounted by searching for them (grepping) in the output of mount. If they are not mounted, it tries to mount them. Else, if the server is down, it looks in the output of mount to see if these mounts exist. If they do, it tries to unmount them with the -f flag (useful for unmounting unreachable NFS shares).
I am trying to share files on my Windows XP Home machine over my P2P network to my Ubuntu netbook. The folder I wish to share is configured in Windows with public permissions. I go to the Files & Folders > Documents and then I click on Network in the Places tab. A Windows Network icon appears, but when I double click it I receive the error message, "Unable to mount location. Failed to retrieve share list from server."
View 2 Replies View RelatedWe have a network with several computer. We have two file servers (don't ask why) an Ubuntu and an XP as well as many clients. Setting shares on Ubuntu was easy and all clients can see them read and write. but I can't get the Ubuntu clients to see the SMB shares on the XP properly. This is my fstab:
Code:
//192.168.0.100/resources /media/resources smbfs iocharset=utf8,credentials=/home/boss/.smbcredentials,dmask=775,gid=1009 0 0
//192.168.0.9/summer /media/summer smbfs iocharset=utf8,credentials=/home/boss/.smbcredentials1,dmask=775,gid=1009 0 0
[Code]....
I'm having trouble setting up samba to work with my vista machine. Whenever I try to mount certain shares I'm getting error 13- permission denied. Specifically, I'm trying to mount my entire C: with this command at the console:
mount.cifs //windows_box/C$ /mnt/windows -o username=tyler,password=****
I've also tried:
mount -t smbfs
mount -t cifs
The funny thing is that I CAN mount some other shares, but not all. My distro is slack-current. I've been following as many relevant threads on this issue for a while now and have tried as many of the suggestions as I could understand, but it's getting to the point that I've lost track of what I've tried and what I haven't. Things I have tried:
Checking permissions on the shares: seem to be ok
enabling encrypted passwords: not sure if I did it right.
editing the registry for LmCompatablity
[code].....
on 10.04 I clicked to share my music folder with the network (other computer also having 10.04) and it installed samba for me. I restarted expecting to find sharing working as it had on the other computer by doing the exact same thing. But for some strange reason I can't access the shares on either computer through the network workgroup. It just says "Unable to Mount Location".
View 7 Replies View Relatedi have a ubuntu 10.10 desktop and laptop. i installed samba, and smbfs. i shared a folder on each computer. when i browse the network i can see the laptop from the laptop, and can see the desktop from the laptop, but i cant see the laptop from the desktop. when i try to mount the share it says unable to mount, but mounts it anyway...but, i need to be able to mount it so that rsync will see the shares as a dir on the desktop. i tried manually mounting via smbmount following several threads that i found, and i keep getting error sudo smbmount //192.168.1.78/share /media/laptop Password: Unable to find suitable address
that is as far as i've been able to get. i've looked and have only been able to find threads about windows shares, not between 2 ubuntu machines. and i dont know why laptop can see the desktop but not the other way around. they have identical smb.conf files
I am unable to mount Windows shares on Fedora 12. From Nautilus, I can navigate to the shares, but when I attempt to open one I get a dialog "Password required for share ... on ..." asking for username (prepopulated with my username), domain (prepopulated with MYGROUP) and password. I have the same username on the Windows box, but when I enter the password and click Connect, the dialog just pops up again. I'm not sure what "domain" is, tried with my Windows workgroup name, no good. If I blank out either username or domain, the Connect button is disabled.
I tried using the mount command:mount -t cifs //192.168.0.2/... /tmp/mnt -o username=adrian,password=...,iocharset=utf8,file_m ode=0777,dir_mode=0777
That did work once, but now gives the useful error message:mount error(5): Input/output error
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
I can run Windows instead on the client machine, and that gives me access to the shares, no problem.
I have libsmbclient-3.4.5-55.fc12.i686, but that was installed a month ago. I don't see any more recent changes to anything relating to the samba client. I've never had to enter a password to access Windows shares. Actually, it looks like the problem may be on the Windows side, although as far as I know, nothing has changed there. Using smbclient with debuglevel set high, I see failures with this error:SPNEGO login failed: NT_STATUS_REQUEST_NOT_ACCEPTED
Every now and again, I can connect to one or more shares, but after a few attempts, I can't connect to any more. Tried rebooting the Windows box, but that's had no effect. Oh, and "smbclient -L" shows domain as the host name of the windows box, but anonymous login (smbclient -L -N) shows domain as the workgroup name.
this subject seems to have been touched a hundred times, but after following all the advice google could provide, i'm still unable to mount cifs shares as user, here's the fstab line
<server> <mountpoint> cifs rw,noauto,credentials=/etc/gattonauth,uid=1000,gid=1000,dir_mode=0770 0 0
i've chowned the mountpoint to the user,
ive tried
chmod +s /sbin/mount.cifs /sbin/mount.cifs
suggested by http://www.linuxquestions.org/questi...-lenny-711337/
I've, for years, been using a little script, as user, to mount network shares, like this:
mount.cifs //server/Data ~/Data -o username=robertw
Previously it used to be smbmount, but that changed. Anyway, the latest updates have stopped me be able to run this as a user. I tried running it as root and that just won't let me get access to the shares, tells me permission denied. I thought I'd try using fstab. This gives varying degrees of success.
Here are two of the entries:
//server/CAD /mnt/CAD cifs credentials=/etc/samba/auth.server.robertw 0 0
//server/Data /mnt/Data cifs credentials=/etc/samba/auth.server.robertw 0 0
The auth.server.robertw clearly shows my correct username and password.
Now, I can't get into the /mnt/Data directory at all, just says permission denied and I can only read from, but not write to, the /mnt/CAD directory. My /mnt directory is like this.
drwxr-xr-x 20 500 505 0 2010-05-11 06:21 CAD/
drwxr-x--x 170 500 501 0 2010-04-09 23:18 Data/
I'm on Mandriva 2010 if that's important.
I have beating my brains out trying to get Lucid Lynx connected to an SME Server 7.4 to automatically mount windows shares. The winbind stuff seems to work okay after I installed a restart script in /etc/network/if-up.d (kudos to OsGnuru & bobpaul for that) There is a short wait on network up before winbind can validate but that is not a show stopper. I have looked at (what I think) is the correct log for pam_mount and it seems to be running through to the end process okay. It looks like it is either not reading the pam_mount.conf.xml file or I have not configured it correctly as it just reports "No Volumes to Mount". I have appended the log file, pam_mount auth, password, session & common conf files as well as the pam_mount.conf.xml file for review.
View 1 Replies View RelatedWe are using spare parts (Socket 775 Biostar motherboard, OCZ 500wat PSU) to build a computer that will just be another system in the house. I want this system to be running Folding@Home, and the F@H SMP client for Linux is much less of a headache than its Windows couterpart, so I would like this computer to run Fedora. My dad loves networking, and knows how to do it in XP / Vista, so he has always opposed my frequent use of Linux. There are ways of accessing Windows shared folders from Linux, but that I haven't figured it out yet. I want to access Windows shared folders from my Fedora 10. I don't know how to go about doing this, can anyone point me in the right direction? Do I have to install anything special? I can go to Places, and then Network (in Gnome) and I see "Windows Network", but when I click it, I get "Unable to mount location Failed to retrieve share list from server"
View 8 Replies View RelatedIt's been awhile since I posted anything which is a good sign my install has been working well and I have been able to handle most everything. However, I'm not able to handle this issue. I recently installed F11 and everything went well. But, when trying to see my other computers on the local network, I cannot. I receive this error message: Unable to mount location Failed to receive shared list from server. I understand the message as it is obvious, but do not know how to fix it.
View 14 Replies View RelatedHow do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
On SUSE 11.2 when a CD or DVD is automounted (in the /media directory) it appears that the mount point chosen for the disk always has extra blanks at the end of the mount.
For example, if the label on the CD was DISK-001, the mount point chosen by SUSE is
/media/DISK-001 /
In 11.1 (and earlier) the mount point would have been
/media/DISK-001/
I'm assuming that the trailing blanks are filling in unused or blank chars at the end of the CD label.
Is there any way to change this annoying behavior? I much prefer NOT to have trailing blanks in the mount point.
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies View RelatedI recently installed the pptpd server on my system and set it up according to these instructions:HTML Code[URL]t=132029However after setting everything up on attempting to connect to it from a windows machine (windows 7 home premium to be specific) it gives me two errors which are 720 and 800...It reaches "registering your computer on the network" fine and then gives 720 on the first attempt to connect and then 800 on the second attempt to connect...and then on the third 720 and 4th 800 and so on..My system running the server's I.P is 192.168.1.70My system running the windows OS trying to connects I.P is: 192.168.1.66
View 2 Replies View RelatedI run opensuse 11 at work. I'm trying to see the list of shares on a "server" that is running windows server 2000. If I try smb://server, it doesn't show any shares, but I can browse directly to it such as smb://server/share1. If I use smbclient, it returns the list of shares correctly. I guess I just don't understand why smbclient shows the list of shared folders, but nautilus cannot.
View 3 Replies View RelatedThis is the first time I have run into issues mounting windows shares but I really can't figure this out. Can someone put me out of my windows misery please.
First off, last week I rebuilt my work PC fromWIN7 32bit to WIN7 64bit since then I can no longer mount the window share on my ubuntu server:
I recreated my windows share called "Linux" and used the properties, advanced sharing and added everyone, full access and my domain account full access.
If I browse to \ipaddress I can see my share and access it. From a XP machine I can see the share and access it.
From linux I use the same mount point as before, /linux I use the same fstab and it fails
Code:
I try this manually now:
Code:
Next I try to mount it:
Code:
I looked at my firewall rules and they seem ok.
Next test was connecting to my 2nd pc on windows XP no probs mounted first time.
What is wrong with my new Win 7 setup?
This one has been driving me nuts for some days now:My Gentoo box which is acting as an internet gateway has two point-to-point interfaces, ppp0 (PPPoE to my ISP) and ppp1 (PPTP VPN link to IPREDator). Packets from my local network are just routed through ppp0 and now the fun part starts: I want to MARK (netfilter...) all packets originating from one specific user on that box in order to use another routing table that will contain a default route via the ppp1 interface.Marking seems to work fine as does the second routing table. But quite mysteriously (at least for me), the packets sent out on ppp1 contain the wrong source IP address, namely the address associated with ppp0.So here is what ifconfig and friends tell me:Network interfaces:
Code:
# ifconfig ppp0
ppp0 Protokoll:Punkt-zu-Punkt Verbindung
[code]...
I was wondering if there is any way to SSH from one computer to another and completely bypass a router or any other network infrastructure. The reason I ask is because my robot ( same one in this post ) often needs to change which wireless network it automatically connects to, however it is getting annoying to have to drag out a monitor and plug it in along with a keyboard and mouse every time this needs to happen. Instead I'd much rather just plug my laptop into the other computer, SSH in and change the network myself.
So I thought I would ask you kind people if this is possible. The robot's computer has unused ethernet and USB ports, and I'd like to use those if at all possible (and with linux, anything is possible! -- sorta). I thought about doing something with ad-hoc, but this would limit my range (in infrastructure mode I can control the thing anywhere there is internet), and is to be avoided.
I am dual-bootng Ubuntu 9.10 and Mint 8, both of which use GRUB2. The Mint 8 GRUB sets the initial menu since Mint was loaded after Ubuuntu 9.10. Since both use GRUB2 I was not concerned about this.
Both before the installation of Mint and afterward I see a series of messages fly by on the screen when Ubuntu is booted. These come right after the initial presentation of the Ubuntu logo.
By restarting several times I can read the first several lines. They are:
Mount: Mount Point 0 does not exist
Mount 0 terminated with status 32
Mountall: Filesystem could not be mounted
Further lines follow but I would have to reboot umpteen times to have any chance of copying those.
I have looked in the various Ubuntu GRUB2 files for "Mount Point 0". I do not see any reference to it.
GParted, BKID and etc/fstab all agree on the UUIDs set for my Ubuntu/, Ubuntu Home and Ubuntu swap file.
I see nothing like this when I boot Mint 8.
My questions:
What is the point to error messages (I assume that is what they are) that fly by too quickly to be read? Are they saved to a logfile somewhere?
What is "Mount Point 0"?
What does it mean in this context to say "Filesystem could not be mounted"?
This is all very curious because Ubuntu proceeds to mount and run just fine.
What is Ubuntu trying to do as it starts up that it cannot do?
How do I repair whatever has to be repaired in order to turn off these messages?
I have looked through such GRUB2 dcumentation as I can find without seeing any reference to this.
I have a folder shared over NFS that contains three sub folders:
(Machine A)
/usr/nfsshare/a
/usr/nfsshare/b
/usr/nfsshare/c
I can see these three folders just fine on machine B via nfs.
sudo mount machineA:/usr/nfsshare /mnt/ShareMountOnB
Now I want to mount a second drive in machine A, and mount it as a fourth shared folder:
mkdir /usr/nfsshare/d
sudo mount /dev/sdb1 /usr/nfsshare/d
I can see and access all four folders on machine A just fine. I can see all four folders on machine B in /mnt/ShareMountOnB, but when I descend into folder d, it is empty! Bizarrely I can create files in this empty folder d on machine B, but I have no idea where they are being held. They are certainly not in machine A. What I have to do to access the real contents of folder d. I have already changed all permissions and owners to be identical to the other folders.Sharing it over samba to a Windows PC works fine.
I just installed 11.04 beta yesterday and was following along with this article so I could setup a "Storage" partition and always have access to the same files in win 7 or ubuntu. [URL]
The problem happens when you try to install and use ntfs-config and run it. Here is the description from the article:
Quote:
Originally Posted by lifhacker article
Finally! Head to the Applications menu and pick the Ubuntu Software Center. In there, search for "ntfs-config," and double-click on the NTFS Configuration Tool that's the first result. Install it, then close the Software Center. If you've got the "Storage" or Windows 7 partitions mounted, head to any location in Places and then click the eject icon next to those drives in the left-hand sidebar. Now head to the System->Administration menu and pick the NTFS Configuration Tool.
You'll see a few partitions listed, likely as /dev/sda1, /dev/sda2, and the like. If you only want your storage drive, it should be listed as /dev/sda3 or something similar--just not the first or second options. Check the box for "Add," click in the "Mount point" column to give it a name (Storage, perhaps?), and hit "Apply." Check both boxes on the next window to allow read/write access, and hit OK, and you're done. Now the drive with all your stuff is accessible to Windows and Linux at all times.
When I try to run the ntfs-config, I get the following.
However, in the software center there is a note below the ntfs-config download saying:
Quote:
Originally Posted by Software Center
It just so happens that this program is a newer and improved version, but very few people know about it. It's better to install the disk-manager.
I've just formatted a new USB drive to ext4. After creating a mountpoint (/media/Vids) and mounting it I changed permissions so my user owned the filesystem. I added the filesystem to /etc/fstab.
However, when unmounting the drive the mountpoint directory disappeared and I have to manually recreate the mountpoint everytime I want to remount the drive. What's going on?
Been trying to find out the mount point for an external usb hub. I can find information with lsusb :
Bus 001 Device 002: ID 05e3:0608
and dmesg:
[0.924293] hub 1-0:1.0: 4 ports detected
But can't seem to find where the hub is mounted. I've tried / dev and /etc/fstab and mtab and /media. BTW what does [0.924293] signify?
I'm setting up an NFS server on a command line install (9.10) to share a directory for a farmerjoe render farm. My instructions are from code...
I do not have DNS installed. I cannot install a stand alone DNS server on the network which the render farm will run. I cannot point any of the machines in the render farm to the current DNS server. The render farm is on a VLAN (in a design lab) with the NFS server receiving a reserved static IP address and the clients receiving DHCP addresses from a currently running server. After reading this post
http://ubuntuforums.org/showthread.php?t=321926
it seems that I should be able to mount NFS shares using an IP address.
It mounts OK on the fly (mount /usr/local) but when you reboot, it hangs, presumably forever, saying that "The disk drive /usr/local is not ready, S to skip, M for manual".Pressing S or M does nothing. I then have to turn the machine off, boot off a CD, mount the HD's / partition and remove the fstab entry before I can successfully boot the OS.Having looked at various forums, I have tried some different things like removing the "0 0", putting "auto" in the options. Unsurprisingly perhaps, these made no difference.
This behaviour was noticed on 10.04, but having tested it on 9.10 it does a similar thing on that version too, although on that one you can actually enter a shell at the hang point and edit your fstab.
Im setting up a Mythbuntu box as a HTPC, and I want to be able to stream my media from my Windows box to the Mythbuntu box. I got the windows shares mounted fine, everything works. But I want them to auto mount so I modded my /etc/fstab file to mount the share. The problem is the Mythbuntu box uses wifi, and during boot the computer can't connect to the Windows box, and it hangs on
Quote:
Error while mounting /blah/blah/ press s to skip or m for manual recovery and I am planning on not having a kbd hooked up to this computer once it is done.
1) Is there a better way to auto mount Windows shares - one that does the mounting after the computer is booted up? Furthermore, the Windows box may be off, so I want it to just skip the mounting on error.
2) Right now when I mount the share, I have to specify the Windows computer by its IP address. If I do it by PC name, it doesn't work, says it can't find the computer. Is there a way to mount using the computer name, so that if my router decides to give the windows box a new IP I wont have to reload everything?
I just removed ubuntu and installed kubuntu, just for something different. i had my home and / folders partitioned separately for ease of upgrade, now during the update process i forgot to make sure the home directory would mount the right partition. for fear of loosing data, so my question is, is there any way of changing the mount point of the drive one the OS is installed.
View 9 Replies View Related