Ubuntu Networking :: VPN - Can Connect In One Part Of The House But Not Another
Feb 1, 2011
I'm trying to connect to Ipredator. If I plug my laptop into the wired network in one part of my house, I am able to connect to the VPN. If I connect to the wifi in another part of the house, network manager fails to connect to Ipredator. I have a wall-plugged wireless range extender, Netgear WGX102, connected to the wired network in the part of the house where Ipredator works, and it is providing the wireless access point in the part of the house where Ipredator does not work.
I checked the Netgear website and they don't seem to have any newer firmware for it. I've tried everything I can think of in terms of changing settings in the wireless range extender. Am I doing something wrong, and if so, what? If the problem is with the wireless range extender, then what can I get to replace it?
View 1 Replies
ADVERTISEMENT
Sep 5, 2010
i need to set up a vpn to connect to my house from wherever i am with my laptop. whats the best way to do this?
View 4 Replies
View Related
Jan 9, 2010
im having some problems trying to have multipul pc's at my house being VNC servers. I have one thats running ubuntu 8.10 and it has its own ip and its own port of 5900, the usual vnc port number. That is my server. Then i have my main pc that has its own ip as well and its own port number of 5901. After some research i found that the port numbers start at 5900 and go up by one for vnc. So my main issue is how do i tell my vnc client to look at a port other than the standard 5900?
Iv been googling trying to figure out how to configure vnc to look to a different port.
View 4 Replies
View Related
May 22, 2010
Alright so i just wanted to try and get remote desktop connections running so i can access files on the other computers in my house. For my first try i went after my laptop. I'm using rdesktop.
First couple times i tried i typed in
Code:
After about 15 seconds it would pop back with
Code:
I realized that my laptop's firewall was blocking the packets, so i created a custom rule that allows all TCP packets on port 3389. So i fired up rdesktop again. Now it pops back with:
Code:
But instantaneously, not after 15 seconds (not sure if thats significant or not.) I checked my firewall's log and it allowed the tcp packets.
View 6 Replies
View Related
Oct 13, 2009
i was getting impatient in finding a way to make some of my peripherial devices to work in linux but no luck, so i installed windows xp home in virtual box, gave it access to my usb devices and installed the drivers for the printers and scanner. but there is just one thing that i want to do now how do i get windows xp to share my printer in virtual box with other computers in the house
View 5 Replies
View Related
Dec 8, 2010
I just used dd to clone a linux partition to a new hard drive, it had 800mb left on the old hard drive, after dd, new hard drive lists 1.29/1.3 terabytes full. Is this what happens by default in dd? How can I fix this?
View 1 Replies
View Related
May 24, 2010
I'm trying to figure out how to access the local part and the domain part of an email address in postfix's main.cf. For example, myname@mydomain.net has myname as the local part and mydomain.net as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.
View 2 Replies
View Related
Jul 13, 2009
we have access to one domain name , 1 internet ip address and may servers hosting different part of site. I want them all to be accessed via same web site . some of the server in our network are embedded devices.they have their specific utility being hosted on that machine. So the severs are bound to be distributed . I just wanted to know how can I access them via single ip, domain name.
View 6 Replies
View Related
Jan 14, 2010
In bootseqence of linux, the first step is check the CMOSRAM(size 64bytes) setup for custmor setting. So i am just confused wether CMOSRAM is a part of motherboard or is a part of RAM itself.
View 4 Replies
View Related
Mar 31, 2010
After deleting part of the gnome config directories in order to reset gnome (GUI was messed up - No title bars, etc). I lost my bluetooth tethering to my Nokia N900. I cannot redo it as it always fails. Linking from phone to Laptop works, but cannot use it to link up to the internet then. Cable to the phone always worked up till now. Now I cannot get a connection as it stopped working after my upgrade to 11.04.
View 3 Replies
View Related
Jun 24, 2010
I have a WD My Book Essential Edition hard drive that has 500GBs of storage that I want to use with ubuntu and my windows machines in my house. The drives are preformatted with NTFS. Does ubuntu natively support read/write of NTFS hard drives?
View 1 Replies
View Related
Jan 14, 2010
I have an old clunker box with no HD insalled in it. it does have a cd rom however, and i would be able to run DSL from it with that alone.
i want to set this box up as a print server, since as it is all of the computers in the house must actually be moved to the printer and connected to it via USB to print.
i am looking to simplify this for everyones benefit, here.
the box i am going to use will *not* be connected to a monitor, KB or mouse once it is ready to be left on its own. i will use these to set it up, but after that, id prefer a way to http: into it or FTP into it.
i am on ubuntu, the rest of the house is on XP. i figure i will have to configure the computer with SAMBA in order to set it up for sharing, is that correct?
i will be connecting the computer to the wireless router.
basically, id just like help with a roadmap on what needs to be done to set this up. i dont need step by step directions on everything, just an idea of where to start. id really like to get this setup within a few hours.
View 2 Replies
View Related
Apr 7, 2010
I am trying to set up a free wireless network for clients for a small business. I have a wireless router that I plan on hooking up to our main router. I want to keep all the computers that are associated with the wireless router from being able to access the rest of the network hooked up to our main router. I think one solution might be to put the wireless router in a DMZ. I think this should isolate it from the rest of the network (and have a side-effect of sending outside traffic to the wireless router, which shouldn't matter). Will this work? Also, if I just make both routers have the same subnet (e.g. 192.168.1.x), will my wireless router just filter out requests for computers on our main network as requests for (non-existent) computers on its local network? Any other ideas are welcome.
View 2 Replies
View Related
Nov 5, 2010
Basically I am looking to short-cut the whole learning curve thing and just buy the adapter that I need! What I need is for someone / what usb wireless-n adapter that DOES work with very little effort on my part!
View 5 Replies
View Related
Jun 16, 2010
There are a number of USB devices that can make Skype work with an existing home phone network, but most I've seen require Windows to work. I already have an always on headless Linux server running Ubuntu Server 9.04 (no GUI installed), so does anyone know of software and hardware that'll work with my setup to enable one of the analog lines in my home to work with Skype?
Also it seems most of the USB to Phone adapters are being discontinued and Skype doesn't even list any on their site. Do you guys know if they're phasing these devices out?
View 4 Replies
View Related
Jul 3, 2011
I just installed Fedora 13 on my desktop but I can't get it to pick up the wireless network in the house.The desktop has a Linksys AE1000 that can feed off of the wireless router in another room when I boot up in Windows.
View 9 Replies
View Related
Jun 12, 2011
I am having trouble connecting to VNC server from any machine in my house. The server is running fedora v14.
Previously I was able to connect when i had dsl, but i have since switched to cable and am having a problem
I checked the vnc error log and saw the below error. Note these are excerpts from the file
I have checked
1. VNC server is up and running
2. My username is in the vnc file
3. the port i am trying to connect to is open.
[Code]...
View 1 Replies
View Related
Mar 24, 2010
I would like to install a surveillance system from my barn to my house. I have used linux based distros for some time. Currently using ubuntu. Need four cameras. Wifi or wireless. Audio and video. Color and Infrared. Not sure if I want a PC or DVR interface. I am very interested in supporting hardware outfits that support open source (FOSS). The barn is located four hundred feet away from the house. No problem with line of sight. I'm getting too old to drag my behind up to the barn in the middle of the night when newborns arrive.
View 4 Replies
View Related
May 21, 2011
I have an application which generate logs like this
Code:
2011-05-17 13:21:27 - Msg 2402
File loading terminated.
File information: 3 records in input file found
3 records processed
0 records skipped
Load statistics: 3 messages loaded correctly
0 messages ignored
0 messages with errors
Details:
Destination OK ignored errors correct incorrect not sel. other
house Server (def 3 0 0 0 2 1 0
2011-05-17 13:21:27 - Msg 2410
Archiving information: File /path/to/xxx.txt
was archived as /path/to/xxx.txt.
Now I want to monitor this "house Server (def" and send alert based on 3 0 0 0 2 1 0
say if [ $5 -gt 0 || $6 -gt 0 ]; then
<send email>
View 6 Replies
View Related
Jan 28, 2011
**Edit: path for mount was incorrect Distro Server: CentOS 5.5
Clients:
Fedora(latest)
OSX(latest)
Backround I am attempting to setup a server in my house mostly(for the first time) for backups and file sharing. It is important to me that file permissions are preserved. So its my understanding that I must use idmapd in order for this to work. As of now I'm only working with the linux distros while osx will be dealt with once these two work together. portmapper is up and running, along with lockd on both machines. Firewalls are also down on both machines for now. The server side was all setup using the GUI interface with no extra options selected. Problem When attempting to "mount -t nfs4 10.0.0.2/$sharedfolder /mnt" I get an error operation not permitted with no error printing in /var/log/message. If I use "mount -t -o nolock nfs4 10.0.0.2/$sharedfolder /mnt" it mounts just fine. Ive checked both machines multiple times to make sure that lockd is up and running. In the idmapd.conf file I the domain as "localdomain" for both machines but I doubt that is right; like I stated above this is my first attempt at a server. I'm assuming the problem is a whole missing step that involves some kind of id mapping server I need to setup.
View 5 Replies
View Related
Apr 28, 2010
I am trying to locate the tables in Versys the house demographic information, does anyone know the path?
View 1 Replies
View Related
Apr 26, 2010
We're in the final process of building a home, and I had them setup a wiring box where all the coax and cat5 terminates into one closet, which will also house my server. Once we get moved in I'd also like to add speakers in each room to have house-wide music, and ideally I'd like the audio to also run into this box with the master input coming from the server as well.My thought was to setup the server with some basic desktop manager like Fluxbox and use that to drive audio throughout the house, whether it be Pandora, Sirius Radio, or whatever. Since the server will be headless I'll need it setup so we can remote into it from our laptops, but I wasn't sure if VNC or some other RDP variant would work. Ideally we'll need to access a unified desktop so traditional terminal services where each users gets their own desktop might not be ideal
View 1 Replies
View Related
Dec 14, 2009
lost my internet connection on fedora 12 ? i try to assaing the ip address manual in the configruation part but no nothing happen I've tried googling for the problem
View 4 Replies
View Related
Jun 12, 2010
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies
View Related
Nov 2, 2010
I am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies
View Related
Jan 10, 2011
in linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies
View Related
Apr 6, 2011
I am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
View 5 Replies
View Related
Aug 8, 2011
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies
View Related
Aug 15, 2010
I had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.
However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.
Here are some outputs:
I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.
View 1 Replies
View Related
May 3, 2011
I can not connect to wifi networks, i can see them but not connect.
My wifi device is:
View 9 Replies
View Related
