Ubuntu Networking :: Unable To NFS Share "permission Denied"?
Nov 9, 2010
I have a Acer Altos EasyStore NAS on which I have enabled an NFS share for a specific IP address. The EasyStore then shows me the NFS path as: Mount path: /nas/NASDisk-00004/media
When I try mounting the share from the machine at the allowed IP address it appears to mount OK, but when I try to view the directory using 'ls' I get 'ls: cannot open directory /nfs: Permission Denied'. the /nfs folder where I'm trying to mount the NFS share shows up in ls as belonging to a group called 11587 (everything else is shown as root). I have no control over the group ID on the NAS as it's just an appliance. How can I gain access to the shared folders?
View 1 Replies
ADVERTISEMENT
Mar 23, 2010
I'm sure there is a very trivial solution to my problem but I just can't figure it out due to my lack of knowledge.I want to mount an nfs share share on client1. The share is on server1.The server1 /etc/exportfs has entry: /backup client1 rw,all_squash,no_subtree_ check) The client1 sudo mount works just fine: sudo mount server1:/backup /backup..Can anyone let me know how to mount the nfs whare with options to read/write permissions for a regular user. And then put that mount into /etc/fstab? Should I mount first and then change the ownership of that folder?
View 4 Replies
View Related
May 21, 2009
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
View 1 Replies
View Related
Feb 25, 2010
I have a DLink 323 NAS with a USB port for a printer. Im trying to setup the printer. When I get to the part where I have to enter the username and password for the NAS, no matter what I put in for a password and username, I get the same error message (see attached screenshot). I can not get my network printer to work because of this.
View 7 Replies
View Related
Jun 15, 2011
I'm trying to setup a samba server to share data among clients via cifs. As a test, I mounted the samba share on the same machine and tried to access the contents of the directory. The mount command was:mount -t cifs -o username=sthomaso,workgroup=WORKGROUP //server/scratch /mnt/server/scratch..which worked fine after entering the password. Although I can "cd /mnt/server/scratch", when I try to list the contents of the directory with "ls", I get error "ls: reading directory .: Permission denied".
View 2 Replies
View Related
Jun 19, 2010
Mount a Windows share where my user account has admin privileges. All permissions granted to the share on the windows pc side.Mount statement is as follows:sudo mount -t smbfs -o username=johndoe //winname/directoryname /mnt/tmp/Share mounts ok but does not let me create or write to an existing file. When I select Properties on the directory it says that permissions are unknown on the share looking at it from Ubuntu.
View 4 Replies
View Related
Jul 22, 2010
I've got some folders shared on our Ubuntu machine so that everybody can access them. However, some of our users are having problems with that. The two users who are on Macbooks can barely access anything without getting a "Permission Denied" message. I've hit the directories with chmod 777 just to obliterate any lingering issues, but yet the issue persists.
View 9 Replies
View Related
May 30, 2010
I'm trying to install Ubuntu on an Aspire laptop with Windows XP. I downloaded 10.04 and burned an ISO image. I boot Windows and open the ISO disk. I open the first choice which is to try Ubuntu prior to a complete installation. The installation starts and proceeds for a few minutes. Then it stops and displays a message 'Permission Denied' and a suggestion to check the installation log. The last few lines are:
[code]...
View 1 Replies
View Related
Jun 6, 2011
I installed samba em my opensusse and i have fallows error: Unable to setup corepath for smbd: Permission denied
View 1 Replies
View Related
Mar 8, 2011
Unable to open pty: Permission denied while trying to login to vps node.
View 2 Replies
View Related
Apr 20, 2010
I was able to get the a2ensite command to enable a virtual site because it says "Site xxxxx.com already enabled" when I run the command. My problem now is that even though a site is enabled it says this: Code: /etc/init.d/apache2 restart * Restarting web server apache2
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
[Tue Apr 20 01:28:57 2010] [warn] NameVirtualHost *:80 has no VirtualHosts
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Should I do a chown or chmod to a file?
View 1 Replies
View Related
Jul 7, 2011
I am unable to start my xserver, using the startx command that I have been using for the past 5 years. It goes to the blue loading screen with the x for a cursor, hangs there for about a min or so then goes back to the command screen. I get an error:
Code:
giving up. xinit: Permission denied (errno 13): unable to connect to xserver waiting for xserver to shut down xinit: Server error.I have tried logging on as root and trying startx again. Same error.
View 2 Replies
View Related
Feb 25, 2011
when I try to su, with the right password I know it is because I have reset it with a sudo, it says su: incorrect password. Looking at /var/log/messages I see su: Unable to open admin password file: Permission denied. This must mean that the file has incorrect permissions and or owner/group. I am wondering if anyone knew where the file was located and the correct permissions/owner/group.
View 3 Replies
View Related
Apr 3, 2011
I'm trying to install 10.10 but it keeps throwing an error. I'll include the error and log file below:
An error occurred: Permission Denied For more information, see the log file: c:...
View 8 Replies
View Related
Mar 14, 2010
Running newaliasespostalias: fatal: open database /etc/aliases.db: Permission deniedin my /etc I do not have a aliases.db only an aliases.I cp aliases aliases.db but when I try and install post fix again it gives me the same error and aliases.db goes away.
View 9 Replies
View Related
Apr 5, 2011
Code: # traceroute -I 69.12.32.2 Note: the -i and -I options were exchangedfor compability with LBL traceroute Use -I for ICMP, and -i <ifname> to specify the interface name unable to create ICMP send socket: Permission denied Note that the command was done as root. This worked in 11.3.
And yes, it works without the "-I". But it should work with the "-I". One shouldn't have to boot into Windows, just to run "tracert" there.
View 9 Replies
View Related
Jan 21, 2010
I'm trying to access a share across the net. the share is a disk "fat32" which I mounted using "vfat users,rw,exec 0 0." However, after I created the samba user "smbpasswd -a user" I'm still unable to access the share across the net. ports are open, and entry has been made in smb.conf for share. But I'm having problems giving permission to smb user. the share it is mounted on /media/share, and I've tried everything from
chmod -R ug+rwx /media/share
chmod -R ugo+rwx /media/share
chown -R user /media/share
and I always get unable to set permission for user
View 1 Replies
View Related
May 12, 2010
I have a mount problem with a NFS server on Debian Lenny. No matter what I do, I cannot mount a directory from another Debian box on the same network.
The error the client gives:
The server reports:
But there it is, in my exports:
cat /etc/exports:
Doing a:
NOTE: this default has changed since nfs-utils version 1.0.x
Comes up empty (and it should not, right?)
There is no firewall inbetween. No access restrictions via the tcpwrappers.
View 8 Replies
View Related
Mar 26, 2010
I have followed that many post about using a Windows mount, and still have an issue.
Using Ubuntu 8.04 to mount a shared on a Windows 2003 Server.
I have the fstab method with this line:
//server/xms /mnt/xms cifs defaults,uid=1000,gid=1000,credentials=/root/.smbcredentials 0 0
or
//server/xms /mnt/xms cifs credentials=/root/.smbcredentials,iocharset=utf8,file_mode=0777,dir_ mode=0777 0 0
Both work when doing a mount /mnt/xms command. I can ls the directory on the windows share. I can cat files from the windows share.
If I touch or mkdir in the windows share I get "Permission denied"
View 2 Replies
View Related
Oct 14, 2010
I wanted to use NFS4 with id mapping. I followed the write up at [URL] and basically have everything working.
The problem is that I cannot write a file unless I have group write permissions. On the server the user has uid = 1000, gid = 1000. On the client the user has uid =1699, gid = 1000. Both have the same user name.
On the client the directory listing properly shows the user name and the group name. If the file on the server is 644, the client cannot write to the file. If it is 664 on the server, then the client can write to the file.
/etc/export on server contains:
Code:
/export 172.24.84.0/24(rw,fsid=0,insecure,no_subtree_check,async)
/export/myuser 172.24.84.0/24(rw,nohide,insecure,no_subtree_check,async)
/etc/fstab on client contains:
Code:
nfsserver:/myuser /home/myuser/mntpoint nfs4 rw,noauto,user 0 0
View 5 Replies
View Related
May 2, 2010
I just set up a storage server with NFS sharing. Everything work fine but, when trying to mount the remote partition on my ws, this is the issue:
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Permission denied
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Success
mount.nfs: rpc.statd is not running but is required for remote locking.
mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
I tried so to mount it locally :
mount.nfs: access denied by server while mounting localhost:/var/ftp/pub /mnt
I don't think it depends because of the permiss of the directory, and anyway it's 1777.
View 4 Replies
View Related
Oct 13, 2009
using a terminal
logged into userMan remotely
[code]
scp /file.txt xxx.xxx.xx:/home/userMan/
[code]
Is the syntax above correct?
I'm trying to copy /file.txt from local machine, to server with userMan
error: /file.txt doesn't exist
View 8 Replies
View Related
Sep 22, 2010
I want to access my desktop from my laptop over the internet, after a while I found this [URL] so I followed the instructions "Access your PC over the internet" and "Logging in from another Ubuntu PC". Everything goes well until I try to run the shell script and get this: laptopuser@123.456.7.890's password:
I tried my luck with the passphrase associated with the rsa key, with the password of the laptopuser@laptop and with the password of the desktopuser@desktop but I keep getting Permission Denied (publickey, password).
View 5 Replies
View Related
Dec 10, 2010
I have a shared directory on another machine but I can't get it to mount as a samba share. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too. The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ******
mount error(13): Permission denied
Refer to the mount.cifs( manual page (e.g. man mount.cifs)
The man page does not have a list of error codes.
View 4 Replies
View Related
Jul 22, 2010
I run a small home network with a wireless network using Apple airport wireless router. I have two macs and one Linux box (Fedora 13). Everything worked until about a week ago. Now the two macs can communicate with each other, and one of the macs can communicate with the Linux box, but the other can't, which is a bummer because it is a print server.
Pinging from the mac to the linux box gives the error message:
ping: sendto permission denied
Ping from the Linux box to the mac just hangs:
[/home/pjs] # ping 10.0.1.5
PING 10.0.1.5 (10.0.1.5) 56(84) bytes of data.
Firewalls on both boxes have been disabled. The Mac was running Little Snitch, but it has been uninstalled.
I have looked for messages from /var/log/message using tail -f and there are none when I ping either way.
ifconfig and /etc hosts, hosts.allow and hosts.deny look normal.
View 2 Replies
View Related
Feb 8, 2011
I've just set up keys using
[Code]...
View 5 Replies
View Related
Mar 14, 2011
I'm implementing static IPv6 address on two Fedora 13 installed hosts. These two computers are connected using a switch between them and I use D-ITG to generate traffic in the network.I need to send packet from host1 to host2 using this command and I got permission denied
Code:
#./ITGSend -a 2001:db8:c003:111e::3 -T UDP -x recv_log_file -t 30000 -c 32
Connect error in createTransportChan(): Permission denied
[code]....
View 1 Replies
View Related
Feb 24, 2011
I'm having a problem with Active Directory and Share permissions that I cant seem to figure out. I used likewise-open to join my ubuntu server to a windows 2008 domain. Everything seems to be working fine. The problem is, the only way I can access the shares is if I CHMOD 777 the share directory. If I CHMOD 770, the Domain owner or Domain group member of the directory cant access the directory. Also, when creating a folder within the share, I need to set the directory mask as 777 in order to enter those sub folders.
Heres the share section from my smb.conf
Code:
[public]
comment = Ubuntu File Server Share
path = /srv/samba/public
browseable = yes
[Code]...
View 1 Replies
View Related
Oct 19, 2010
I have a Samba share that contains a symbolic link and when I try accessing it from the WinXP machine it denies permission. If I access it from the Linux account, it goes in with no problems. Is there a certain setting that needs to be set or enabled or is this just one of those things with Samba?
View 5 Replies
View Related
Mar 30, 2010
I have an Acer EasyStore NAS which I can access fine in Nautilus, but a server which I have been trying to mount via command line refuses to even let me view the contents of the folder. The mount command appears to work, a password is requested when connecting to the shared folder.
sudo mount -t cifs --verbose -o user=jason //nas/media /mnt/nas
mount.cifs kernel mount options: unc=//nasmedia,ver=1,rw,user=jason,ip=192.168.0.250,pas s=********
But I cannot even view the folder contents, as even a simple ls returns:
ls: cannot open directory /mnt/nas: Permission Denied
Even on my laptop which is able to access all the shared folders under Nautilus I am unable to mount shares from the command line.
View 1 Replies
View Related
