Ubuntu :: Mount Dir Using Smbfs To Windows Share Can't Write To File Permission Denied?
Jun 19, 2010
Mount a Windows share where my user account has admin privileges. All permissions granted to the share on the windows pc side.Mount statement is as follows:sudo mount -t smbfs -o username=johndoe //winname/directoryname /mnt/tmp/Share mounts ok but does not let me create or write to an existing file. When I select Properties on the directory it says that permissions are unknown on the share looking at it from Ubuntu.
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
Command used as root to mount a Windows 2003 server share to Linux Red Hat 4 x86-64 on Dell: mount -t smbfs -o username=user,workgroup=domain.edu,password=password //server.domain.edu/h$ /mnt/test The mount is successful, but only root can write to the mount. How do I set the permissions on the mount to allow certain users read/write access to the share? I am logged on the Linux server as the same user who authenticated the mount. The user can read write on the Windows server share, but not while loggged into the Linux server.
Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
i have client and server PCs, both with openSuse 11.2.
on the server side, i have mounted HD partition to /vmshare dir. relevant line in /etc/fstab reads:
Code: /dev/disk/by-id/ata-WDC_WD3200AAJS-07B4A0_WD-WCAT16493946-part2 /vmshare reiserfs user,acl 1 2 i want to export /vmshare dir via nfs. i have configured it through yast and resulting line in /etc/exports reads: Code: /vmshare *(rw,root_squash,sync,no_subtree_check,crossmnt) the permissions for this directory is drwxrwxr-x root vmshare.
i can successfully mount the exported dir on client side, i can move between directories and list contents, but i can't write into it (not even as a root). on the server side, i can write to the directory only as root. the vmshare group is created on both machines with same gid as well as all users have same uids. firewalls are down.y.
I'm sure there is a very trivial solution to my problem but I just can't figure it out due to my lack of knowledge.I want to mount an nfs share share on client1. The share is on server1.The server1 /etc/exportfs has entry: /backup client1 rw,all_squash,no_subtree_ check) The client1 sudo mount works just fine: sudo mount server1:/backup /backup..Can anyone let me know how to mount the nfs whare with options to read/write permissions for a regular user. And then put that mount into /etc/fstab? Should I mount first and then change the ownership of that folder?
I have a DLink 323 NAS with a USB port for a printer. Im trying to setup the printer. When I get to the part where I have to enter the username and password for the NAS, no matter what I put in for a password and username, I get the same error message (see attached screenshot). I can not get my network printer to work because of this.
What are the possible problem when Windows access the file from Ubuntu got Read Only even though have a full permission to read, write and execute the file? Ubuntu to Ubuntu accessing the file there is no problem only Windows got a problem.
I'm on OS X and mount a network share from my Windows XP machine. Files by default have the rwx (700) permissions. What OS X option I need to change, that the files will have rw (600) permission?
Maybe this question also applies for Linux mounting a Windows network share.
I'm trying to setup a samba server to share data among clients via cifs. As a test, I mounted the samba share on the same machine and tried to access the contents of the directory. The mount command was:mount -t cifs -o username=sthomaso,workgroup=WORKGROUP //server/scratch /mnt/server/scratch..which worked fine after entering the password. Although I can "cd /mnt/server/scratch", when I try to list the contents of the directory with "ls", I get error "ls: reading directory .: Permission denied".
I cant install Ubuntu 11.04 , on my Emachines laptop. On my Windows 7, When I boot up my USB/CD/card, it says: Ubuntu failed to mount dev/loop0 , something like that everytime, no matter what I do. And when I try wubi it says permission denied, .log filed saved. I've also mounted it using clonedrive, nothing works.
I just set up a storage server with NFS sharing. Everything work fine but, when trying to mount the remote partition on my ws, this is the issue: /usr/sbin/start-statd: line 8: /sbin/rpc.statd: Permission denied /usr/sbin/start-statd: line 8: /sbin/rpc.statd: Success mount.nfs: rpc.statd is not running but is required for remote locking. mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
I tried so to mount it locally : mount.nfs: access denied by server while mounting localhost:/var/ftp/pub /mnt I don't think it depends because of the permiss of the directory, and anyway it's 1777.
When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".
PDC is ClearOS 5.2 named "dc0" Samba file server is CentOS 5.5 x86_64 named "sysimage" dc0 Samba version is samba - 3.5.5-1.1.v5.i386 sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64
dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.
i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com
I have a problem when i installed ubuntu via usb drive and cd.. and i try it in windows xp and windows 7. it's a same problem .. but this is the error message " permission denied "
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
I have tried to mount Sda on my laptop HP dv6 and I have got this problem [root@cpe-74-71-125-175 ~]# /dev/sda1 /mymount/win ntfs-3g rw,umask=0000,defaults 0 0 bash: /dev/sda1: Permission denied
I have a Acer Altos EasyStore NAS on which I have enabled an NFS share for a specific IP address. The EasyStore then shows me the NFS path as: Mount path: /nas/NASDisk-00004/media
When I try mounting the share from the machine at the allowed IP address it appears to mount OK, but when I try to view the directory using 'ls' I get 'ls: cannot open directory /nfs: Permission Denied'. the /nfs folder where I'm trying to mount the NFS share shows up in ls as belonging to a group called 11587 (everything else is shown as root). I have no control over the group ID on the NAS as it's just an appliance. How can I gain access to the shared folders?
I'm using ubuntu 11.04, I'm having some problem of ownership while sharing folder/files. to share i change the folder share option:1. Share this folder, then followed by 2.allow others to create and delete files in this folder3. guest access.Now if someone in my local network edit any file and save it, it gets locked. if some one copy their file in this folder the permission is marked as "no group" "no owner". and they get unaccessible to me. i tried doing chown <user> <folder> but it says Operation not permitted. Now how i can possibly share my folder on local network so that they can be edited by others without getting locked down , if they copy files i can able to modify them.
I have my ubuntu comp setup as a media server and works fine with mythtv etc but I also want to access the files from my computers in the other rooms (most have windows 7). I was able to share the file containing the videos easy enough by right clicking the file and checking all of the sharing options the first time. I have been able to access all the files that i originally put in the folder and stream video to my other computers without issue.
However any new files I add to the folders I am now unable to access. The files show up but when I click on them it says I don't have permission. I have tried unsharing the folder and redoing it but I come to the same issue. I am sure I am just forgetting an easy step but I can't think of what that is. Also want to make sure that any new files I add to this folder will work instantly across the network.
I'm running openSUSE 11.4 (gnome) and I'm trying to transfer files to my windows partition and it says that I don't have the permission to do so. How do I gain access to it?
I have a written a java code to ftp a file from the windows box to unix box. It keeps giving me the following error : "java.io.FileNotFoundException: PORT 204,63,56,5,16,78: 550 Permission denied." I am able to ftp manually from windows to unix.