Ubuntu Networking :: Mounting Samba Shared - Permission Denied
Dec 10, 2010
I have a shared directory on another machine but I can't get it to mount as a samba share. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too. The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ******
mount error(13): Permission denied
Refer to the mount.cifs( manual page (e.g. man mount.cifs)
The man page does not have a list of error codes.
View 4 Replies
ADVERTISEMENT
Jun 2, 2011
I setup a Samba share and I cannot connect. I can mount in on local host but when I CD to the folder I mounted the share on I get access denied when I run ls.
cat /etc/samba/smb.conf
[W$]
path = /Files/
valid users = admin
[Code]....
View 2 Replies
View Related
Aug 29, 2010
I have a Linux Box running Fedora 13, it has Samba installed, and I have configured it, I also have a Windoze 7 PC, I want to be able to access the Windoze PC's files from my Linux Box, and vice versa, but when I try to open the Windoze PC in the network on my Linux Box, it asks for my Username and Password, I enter them, the box goes away then pops back up asking for them again... and on the Windoze PC, I find my Linux on the network, open it, it asks for my username and password, I enter them, and it lets me in, but then when I try opening my shared folder, it gives me: "You do not have permission to access \LINUX Shared Folder. Contact your network administrator to request access".
View 1 Replies
View Related
Jan 27, 2010
mounting my windows partition.. I've got it set up under /etc/fstab, but anytime I try and open it (as local user) I get permission denied.
[Code]...
View 1 Replies
View Related
Jul 7, 2011
I'm running Ubuntu 11.04 (guest) on Windows 7 (host) with the guest additions installed. I have an auto-mount folder that maps to my D: drive on the host which I can access using sudo ls /media/sf_D_DRIVE - however, even when my user (ross) is a member of the vboxsf group I get a permission denied error when attempting to explore it. I have restarted since adding my user to the vboxsf group.
This should work because I am a member of the group (which has rwx rights), so why doesn't it?
ross@panther:~$ ls -l /media
total 8
drwxrwx--- 1 root vboxsf 8192 2011-07-03 22:24 sf_D_DRIVE
ross@panther:~$ ls -l /media/sf_D_DRIVE/
ls: cannot open directory /media/sf_D_DRIVE/: Permission denied
[Code].....
View 1 Replies
View Related
Jan 9, 2010
I have configured samba server.My requirement was that the path which i have to share was /srv/www/htdocs.With this the shared path for developer user was /srv/www/htdocs/projects.
So in the smb.conf file i made the entries as following:
After that root user was able login to both /srv/www/htdocs and also project folder and developer was only able to login to projects folder.That was according to my requirement but now the problem is that when developer is trying to edit any file in projects folder he is getting error that you dont have permissions to change this file.But developer should be able to edit any files. What changes i need to do now.
View 3 Replies
View Related
Feb 2, 2010
I have created a samba share and mounted the share with /etc/fstab on another machine. This share is supposed to be a fully public share i.e. i have different share where different permissions are set but on this particular share i intend to have full read write and execute rights to all the users on my mounting machine.
The problem is that I get only owner and group rights for write on directories that i create due to which all my users can create files in my mount directory but when they create a folder they cannot create any file inside that folder.
View 4 Replies
View Related
May 12, 2010
I have a mount problem with a NFS server on Debian Lenny. No matter what I do, I cannot mount a directory from another Debian box on the same network.
The error the client gives:
The server reports:
But there it is, in my exports:
cat /etc/exports:
Doing a:
NOTE: this default has changed since nfs-utils version 1.0.x
Comes up empty (and it should not, right?)
There is no firewall inbetween. No access restrictions via the tcpwrappers.
View 8 Replies
View Related
Mar 23, 2010
I'm sure there is a very trivial solution to my problem but I just can't figure it out due to my lack of knowledge.I want to mount an nfs share share on client1. The share is on server1.The server1 /etc/exportfs has entry: /backup client1 rw,all_squash,no_subtree_ check) The client1 sudo mount works just fine: sudo mount server1:/backup /backup..Can anyone let me know how to mount the nfs whare with options to read/write permissions for a regular user. And then put that mount into /etc/fstab? Should I mount first and then change the ownership of that folder?
View 4 Replies
View Related
Mar 26, 2010
I have followed that many post about using a Windows mount, and still have an issue.
Using Ubuntu 8.04 to mount a shared on a Windows 2003 Server.
I have the fstab method with this line:
//server/xms /mnt/xms cifs defaults,uid=1000,gid=1000,credentials=/root/.smbcredentials 0 0
or
//server/xms /mnt/xms cifs credentials=/root/.smbcredentials,iocharset=utf8,file_mode=0777,dir_ mode=0777 0 0
Both work when doing a mount /mnt/xms command. I can ls the directory on the windows share. I can cat files from the windows share.
If I touch or mkdir in the windows share I get "Permission denied"
View 2 Replies
View Related
Oct 14, 2010
I wanted to use NFS4 with id mapping. I followed the write up at [URL] and basically have everything working.
The problem is that I cannot write a file unless I have group write permissions. On the server the user has uid = 1000, gid = 1000. On the client the user has uid =1699, gid = 1000. Both have the same user name.
On the client the directory listing properly shows the user name and the group name. If the file on the server is 644, the client cannot write to the file. If it is 664 on the server, then the client can write to the file.
/etc/export on server contains:
Code:
/export 172.24.84.0/24(rw,fsid=0,insecure,no_subtree_check,async)
/export/myuser 172.24.84.0/24(rw,nohide,insecure,no_subtree_check,async)
/etc/fstab on client contains:
Code:
nfsserver:/myuser /home/myuser/mntpoint nfs4 rw,noauto,user 0 0
View 5 Replies
View Related
May 2, 2010
I just set up a storage server with NFS sharing. Everything work fine but, when trying to mount the remote partition on my ws, this is the issue:
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Permission denied
/usr/sbin/start-statd: line 8: /sbin/rpc.statd: Success
mount.nfs: rpc.statd is not running but is required for remote locking.
mount.nfs: Either use '-o nolock' to keep locks local, or start statd.
I tried so to mount it locally :
mount.nfs: access denied by server while mounting localhost:/var/ftp/pub /mnt
I don't think it depends because of the permiss of the directory, and anyway it's 1777.
View 4 Replies
View Related
Oct 13, 2009
using a terminal
logged into userMan remotely
[code]
scp /file.txt xxx.xxx.xx:/home/userMan/
[code]
Is the syntax above correct?
I'm trying to copy /file.txt from local machine, to server with userMan
error: /file.txt doesn't exist
View 8 Replies
View Related
Sep 22, 2010
I want to access my desktop from my laptop over the internet, after a while I found this [URL] so I followed the instructions "Access your PC over the internet" and "Logging in from another Ubuntu PC". Everything goes well until I try to run the shell script and get this: laptopuser@123.456.7.890's password:
I tried my luck with the passphrase associated with the rsa key, with the password of the laptopuser@laptop and with the password of the desktopuser@desktop but I keep getting Permission Denied (publickey, password).
View 5 Replies
View Related
Jul 22, 2010
I run a small home network with a wireless network using Apple airport wireless router. I have two macs and one Linux box (Fedora 13). Everything worked until about a week ago. Now the two macs can communicate with each other, and one of the macs can communicate with the Linux box, but the other can't, which is a bummer because it is a print server.
Pinging from the mac to the linux box gives the error message:
ping: sendto permission denied
Ping from the Linux box to the mac just hangs:
[/home/pjs] # ping 10.0.1.5
PING 10.0.1.5 (10.0.1.5) 56(84) bytes of data.
Firewalls on both boxes have been disabled. The Mac was running Little Snitch, but it has been uninstalled.
I have looked for messages from /var/log/message using tail -f and there are none when I ping either way.
ifconfig and /etc hosts, hosts.allow and hosts.deny look normal.
View 2 Replies
View Related
Feb 8, 2011
I've just set up keys using
[Code]...
View 5 Replies
View Related
May 8, 2010
I set up a nfs server that is working locally only, on remote I get this:
root@poc ~]# mount -t nfs storage:/var/ftp/pub /net
mount.nfs: access denied by server while mounting storage:/var/ftp/pub
This is my exports file:
/var/ftp/pub/downloads 192.168.1.23(rw,sync)
/var/ftp/pub 192.168.1.23(ro,sync)
this is my rpcinfo -p
program vers proto port service
100000 4 tcp 111 portmapper
100000 3 tcp 111 portmapper
100000 2 tcp 111 portmapper
100000 4 udp 111 portmapper
100000 3 udp 111 portmapper
100000 2 udp 111 portmapper
100011 1 udp 875 rquotad .....
Firewall has 2049 open only. Other services suck as nfs or status, lockd have random ports, so firewalled.
View 1 Replies
View Related
Apr 21, 2011
Tried to setup server to export a fileshare:
But the darn laptop cannot connect! I get access denied!
Fedora 14 to Fedora 13.
View 3 Replies
View Related
Feb 27, 2009
I recently installed CentOS 5 as my server. I have samba running 100%, today i was working on NFS i had it semi working at one point where i could mount to the shared folder but i could not see any of the files in it, now when ever i try to access it i get, mount.nfs: access denied by server while mounting 192.168.1.100:/Server
View 11 Replies
View Related
Mar 14, 2011
I'm implementing static IPv6 address on two Fedora 13 installed hosts. These two computers are connected using a switch between them and I use D-ITG to generate traffic in the network.I need to send packet from host1 to host2 using this command and I got permission denied
Code:
#./ITGSend -a 2001:db8:c003:111e::3 -T UDP -x recv_log_file -t 30000 -c 32
Connect error in createTransportChan(): Permission denied
[code]....
View 1 Replies
View Related
Jun 22, 2010
I'm using fedora8.When i mount shared folder on windows,it was mounting and i can browse the files and directories in terminal as i have full permissions on that.But,when i open the mounted directory in GNOME Environment,it was saying you did not have permissions to see the contents,every directory and file has been locked.
View 4 Replies
View Related
Dec 2, 2010
i'm trying to setup a nfs4 server and client. i followed the instructions in [URL](nfsv4 quick start section) and [URL] The SERVER is on 192.168.89.1 running Xubuntu 10.04, and the CLIENT is on 192.168.89.128 running Ubuntu 10.10. Firewall is disabled on both the server and the client for testing purposes. /etc/default/nfs-kernel-server on the SERVER:
Code:
# Number of servers to start up
RPCNFSDCOUNT=8
# Runtime priority of server (see nice(1))
[code]....
On the [URL], i see some steps related to portmap on the "NFS Server" and "NFS Client" sections. Would i need those steps as well? There's also a list of steps on [URL] (linked from [URL]. Are those necessary?
EDIT: Running showmount on the client seemed to show that NOTHING is shared on the server:
Code:
$ showmount -a 192.168.89.1
All mount points on 192.168.89.1:
View 3 Replies
View Related
May 21, 2009
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
View 1 Replies
View Related
Apr 21, 2010
I have a machine running Ubuntu 9.10 that has an external HD with shared folders music folder and media downloads folder). I have set up SAMBA on that machine.
On my laptop I am running a dual boot system with Windows Vista and using wubi install, Ubuntu 9.10.
In Windows, I am able to wirelessly connect to the shared folder and access the music folder and the media downloads folder on my Desktop Ubuntu machine. All is good.
When I boot in Ubuntu, I am unable to connect to the shared folder under Places > Network I can negotiate to the MSHOME (the name of my work group). Once selected I get the error Failed to retrieve Shared List from server error message.
View 2 Replies
View Related
Dec 26, 2010
I had 10.04 set up in my computer so that I had two folders in home, they connected to folders in a windows 7 computer by adding the following to the fstab file:
Code:
//10.0.0.80/Movies /home/loco/Videos/Movies cifs username=guest,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
[code]....
View 7 Replies
View Related
Dec 24, 2010
I've been trying to set up a media server using Ubuntu server, following the instructions from [URL]. I am trying to access the server from a windows 7 pro laptop. I can see my media server on the network. I can see the folder vol1 which I want to access, but when I double click on it, I am given an error message saying it is not accessible and I don't have permission to access it. I can access the server using webmin, and I can access its terminal with putty. I just don't know what settings to tweak.
View 1 Replies
View Related
Sep 10, 2010
I have been having problems with Samba sharing from my Ubuntu-Server to all of my Windows 7 machines. All of the machines are able to access the samba shares however when i try to write to these shares i get a "Access Denied" error. This only happens under windows 7, my Ubuntu laptop easily writes to these shares. PS My permissions are read/write to all
View 1 Replies
View Related
Nov 14, 2010
I am trying to access a shared printer from one Ubuntu PC to another.
On the Server PC, I have the printer working, I have set it to shared, and I have set the server setting to Publish shared printers. I can see and use the printer fine from a windows PC.
On my Ubuntu Client PC, I have samba installed, including smbclient, and all other samba components I can think of. I can see other computers on my home workgroup (Windows and Ubuntu fine). I can also add a printer connected to my windows PC. However I cannot find the printer connected to the other ubuntu PC.
I see the instruction in the Samba guide saying
"Now enter your Ubuntu Samba Print Server (set up as above) IP address in the box on the left titled "smb://"."
However I do not have fixed ip addresses, so what am I supposed to enter in the box. If I enter nothing I can browse the network and can see the host computer, but the printer is not displayed. I can also see the printer connected to the windows PC. How do I 'see' the Ubuntu printer?
View 2 Replies
View Related
May 31, 2010
I have created a shared folder via nautilus. I can not access it, because it asks me for user name and password again and again. I'm sure both username and password are exactly right. But I can not access the folder. Only when I check "Allow guest user access" it will allow me to access my data, Which is not secure enough for me.
View 6 Replies
View Related
Jan 27, 2011
I installed samba just as described in [URL]
Now I want the shared folders (and the files created in them) to be owned by a user named efil. How do I do this?
View 3 Replies
View Related
