Ubuntu Networking :: RDP Through Web Browser?
Jun 2, 2010
Is it possible to remotely access my Ubuntu PC through a web browser (preferably Internet Explorer)? I am currently using TSWeb through Internet Explorer at work to access my Windows PC at home. This is my only option as IS will not allow software installation on any PC's and Windows RDP is not available.
View 4 Replies
ADVERTISEMENT
Feb 7, 2011
I'm surfing along just fine when I select some link in my browser.The status line reports "... waiting for ..." and the browser seems to stall for a long time (minutes). Often, but not every time, I can select the STOP toolbar icon and reload the page. This time things work normally.
I have a similar but different malfunction running Evolution email connected to my hosted IMAP server. I select a message and see "... formatting ..." and then Evolution seems to stall for a long time (minutes). Rarely the stop-reload actions help reading email. Instead,all Evolution windows go dark grey and the entire desktop stalls.[Analysis -- It has the feel of a "network" issue provoking issues within Evolution itself rather than an Evolution-only malfunction.]
Watching the running system with 'htop' and similar, I do not see where some other application or service is sucking all of the available CPU time or such. [Analysis -- It has the feel that either the browser message or the email message were sent into limbo without reaching their intended destination. Stop-reload sends the bits to the right places and so I get results.]
View 7 Replies
View Related
Apr 18, 2011
Which is the default file browser(NOT web browser) of Ubuntu 10.10 Maverick Meerkat?Nautilus?Are there any others for Ubuntu?
View 7 Replies
View Related
Nov 22, 2010
I have installed wine correctly but I want the Rockmelt browser on my ubuntu 10.10 but it will need internet access
View 3 Replies
View Related
Mar 20, 2010
Alright I just installed Linux as the only and got it all set up but now I have a problem with firefox or actually any browser. As far as I understand my internet works fine, I was able to download updates from the software center and various programs too. My problem is that when I try to go to any other website than google the browser just freezes up. The bar in the left bottom corner just says "Waiting for <site name>" Strangely google and google mail works. Ive tried going through all of the network settings but I am at a loss now
View 5 Replies
View Related
Jun 19, 2010
This Ubuntu desktop has 3 network interfaces:LAN eth0: ip address 192.168.3.6 gateway 192.168.3.1VPN tun1: ip address 192.168.7.4 gateway 192.168.7.1VPN tun2: ip address 192.168.9.2 gateway 192.168.9.1For Chrome or Firefox, by default the 192.168.3.1 gateway is used.How do I change this such that:I can manually choose the 192.168.9.1 or 192.168.7.1 or 192.168.3.1 gateway.From the command line.Before running Firefox/Chrome.Without re-configuring any network interfaces.So that ONLY Firefox and Chrome browsers are affected
View 1 Replies
View Related
Jan 8, 2010
I've found that changes configured in my hosts file are not being reflected in my web browsers, but it is in the shell. For example... If I put the following in my /etc/hosts file
Code: 123.456.789.000 server server.dom.com I get a successful response from running ping in the shell
[Code]...
I'm using Ubuntu 9.10. I have to make regular changes to my hosts file to test services, so this is quite a pain.
View 1 Replies
View Related
May 18, 2010
What is the quickest and the most elegant way to implement the following scheme:On my computer I have two browsers and two internet channels:
1. Ethernet cable internet
2. USB 3g modem/.
When I execute the first browser it uses only the cable internet and the second one uses the USB modem.
View 2 Replies
View Related
Oct 3, 2010
The issue I'm having is that browsers in Ubuntu 10.04 stall at the part of the process for loading web pages that is noted by the "Looking Up (website address)...". The page eventually continues to load, but it takes a long time. This problem effects all browsers on the machine (tried Firefox and Chromium). It is not a problem with the connection, because a Windows 7 laptop and even the Windows XP partition on the Ubuntu machine function as they should.
View 9 Replies
View Related
Oct 4, 2010
When I start to download large files and try to use firefox the "Server Not Found" error appears. I'm seriously new to Linux so I don't want to be discouraged on being a fan of Ubuntu Linux.
View 7 Replies
View Related
Jan 25, 2011
I recently moved into a new apartment complex and the building's internet requires a browser login (the wireless network itself isn't secured). If I boot into Windows 7, I can reach the prompt for username/password after instructing the browser to proceed past an invalid certificate.
However, when I start either Firefox or Chrome in 10.10 NBR, I can't reach either the warning about the invalid certificate or the prompt. Any thoughts you have would be greatly appreciated as it'd be nice to get my netbook up and running after the move.
View 3 Replies
View Related
May 30, 2011
I have wired connection Ethernet (eth0) and 3G connection GSM (ttyUSB0). Firefox uses eth0, but sometimes, I want Firefox to use ttyUSB0. How could I do that?
View 6 Replies
View Related
Jun 17, 2011
Just installed the latest 11.04 64bit ubuntu, using std cd install alongside windows7, ticking the "add all extras" option, to ensure I got all the latest drivers etc.. The pc is brand new
Acer emachines E644 - AMD 2 Core C-50
3Gb DDR3 mem
500 Gb hard drive
Pre-installed: 64bit Win 7 home premium I've literally changed nothing in win7 other than using wubi to install ubuntu 1st time around (ubuntu appears as a win program - and was un-installed as such). Note: It is too late to now check, but......... under wubi/win7 I had no sense that the browser firefox was running slow - i didn't do a speedtest.net cos of other priorities (and it seemed fine). On advice, I started again (new partitions etc). The Problem: Ubuntu is now 25% slower (broadband) than Win7! Actually, it feels worse than that - more like it was on my previous lap top that had 512Mb ram running xp. Here are the results after switching os's a couple of times.
[Code]....
Firefox managed one spurious result of 5.89, but the graph (on the speedtest display) was absolutely all over the shop (like it's overall results). Compare that to iExplorer - total stability, and in fact, more like 30% faster + a much better ping. Anyway, I guess you know all this, I've seen that plenty of others have noticed this speed drop in the past, so:
View 9 Replies
View Related
Jul 15, 2011
All of a sudden, none of the applications are able to connect to the internet, except the web browser. I use Google Chrome and sometimes Mozilla firefox.
There is a network proxy and I did apply the network proxy setting system wide.
Applications like Dropbox, Messenger etc stopped connecting to internet which were working very well until yesterday.
View 1 Replies
View Related
Jul 22, 2011
It resides at 65.211.112.135 There are numerous domain names on this ip [URL]s Those are a few of them. Now if you try to ping 65.211.112.135 it does not respond, if you ping "www.barrierfree.us" it says pinging 65.211.112.135 but it also does not respond. BUT if you point your browser to one of the above domain names it will work, but it is quite slow.
View 9 Replies
View Related
Jun 27, 2010
I have been having a problem on my Ubuntu desktop with the wireless connection. I am now running Ubuntu 10.04, but the problem showed up immediately after upgrading to Ubuntu 9.10. This machine is used as a CUPS server so my wife can print from her laptop and get to a printer downstairs. Intermittently, I will be unable to access the CUPS server web pages (or any other web pages on the local Apache server) from a remote machine on the internal network. I also cannot connect in via SSH. However, from the wireless desktop itself the web pages are still accessible and a local browser can also access remote web sites just fine. So, the network connection is still up.
To try to determine how often this was happening, I wrote a simple Bash script that checked if a page could be accessed on the web server on the wireless machine. I used wget to access a page and then log the results to a file while running the script from a crontab entry. It turns out that even though I cannot access a web page using a remote browser, I can access the same web pages using wget from a remote machine. This has me a little confused..What could be causing this situation? I do not have a firewall running on the desktop with the wireless connection. After a while, the blockage of inbound web pages from a remote browser is "fixed" and I can again access the CUPS (and other) pages.
View 3 Replies
View Related
Jan 17, 2010
After I've setup the ubuntu 9.10 I've found that the internet connection working incorrectly. I can ping or even connect to the internet sites with the telnet and see the raw html pages, but when I ran the software center or mozilla I have timeout error message. As a proxy settings I've setup the direct connection in both system and mozilla proxy configurations but it takes no reason. If I put the IP address instead of the domain name in the address bar of the mozilla browser then its loaded the web page correctly. It looks like this problem is relative to some system configuration of X about network (cause telnet google.com 80 working right). I'm using the dhcp connection to the D-Link DSL-504T router.
View 8 Replies
View Related
Aug 11, 2010
I am new to Linux and decided on trying out Ubuntu. Love it so far. Running Ubuntu 64-bit 10.04 on a Toshiva Satellite L300. Network browsing worked fine to both my other machines (one running XP, the other Win7). The next day I switched the laptop on, the other two systems don't show automatically in the File Browser under Network like they used to. It now only shows a Windows Network icon which, when I click on it, gives the following error: Unable to mount location, Failed to retrieve share list from server. I can access the machines' shared folders perfectly through the terminal using smbclient.
View 9 Replies
View Related
Apr 26, 2011
installed UB10.10 on a dell d800 laptop with a built in wireless.The eth1 wireless device/connection shows up on the little radio icon as connected .but the chrome browser says "ERR_name_not_resolved" when I enter a common url.What's the next step or hint for gaining full internet access ?
View 4 Replies
View Related
Aug 2, 2010
i just updated from karmic 9.10 to lucid 10.04 using the online upgrade option. so far everything is working great. the only issues i am having seem to involve firefox. when i visit videos i get the message "your browser is no longer supported. please upgrade to a modern browser." i am running 3.6 "canonical" so it is "modern". i am able to watch videos after i close the message. it's just an annoyance to get this message every time i view a video.
next, is on some websites (like this one) it will not supply my login info. but on a few sites (like ebay) it does supply my login info. not sure why some sites work while others don't. the info is there when i look under my saved passwords....
View 4 Replies
View Related
May 6, 2009
Is there a way to configure the Linksys router via my browser (like I do with a 2WIRE router) and if so, how? (the 2WIRE I just typed gateway in the address bar).
View 1 Replies
View Related
May 27, 2010
I have a serious problem relating network connectivity under all Linux distributions. I have tried variety of browsers, but the webpages either load partially or do not load at all. Surprisingly, app manager still works well, and I can download apps at full speed from xterminal or app manager. This became an issue which renders Linux distributions close to useless to me. I am currently connected through a router, but direct connection does not solve the problem. What is more, my phone, Nokia N900 is experiencing the same problem with its web browser. I assume, it's due to the fact that N900 uses full Linux distribution. Internet works just fine under all Windows versions (XP, Vista, 7).
View 1 Replies
View Related
Jul 6, 2010
The Wifi is connected to my router but it still will not let me access the Internet or any other Internet based operation. (I am running 10.04, I had just installed and and now am trying to get the internet connection running)
View 6 Replies
View Related
Aug 12, 2011
I have a vps server running certain services which can be accessed via a web browser (e.g webmin control panel), but I have recently been unable to access these services from my home machine using Firefox 5.0, running ubuntu 11.04.
Example:
I can access the server on port 80 fine, eg: [URL]
However I cannot access my webmin control panel on: [URL]
The pages takes ages to load and then times out. Same with transmission-daemon on: [URL]
Everything is set up fine on my server, the ports are open in firewall etc. and I can access these pages fine from my work computer.
This has only started happening in the last day or two and had been working fine up till then. I have not messed around at all with the firewall on my home machine. I have tried other browsers besides Firefox with same result.
View 4 Replies
View Related
May 9, 2009
Just wanted to ask a small question... I've set up a VPN connection to my university and i installed and configured everything ok, cause I can connect without any problems...
Now that I'm connected I want my browser to run through the VPN tunnel created by the connection so i can access certain sites that are else inaccessible, but how do i force my browser (I'm using firefox atm) to do that?
When I'm on MAC of Windows OS, as soon as i connect with a VPN, all connection run through them. Fedora seems to ignore the VPN connection and just continues to use my home-network to connect to the internet.
So the basic question is: how do i use the VPN connection.
Iuse FC10, kernel 2.6.27.21-170.2.56.fc10.i686, fully updated system
View 4 Replies
View Related
Dec 27, 2009
I have a very strange problem with Fedora 12 and my wireless Broadcom 4311 card.After the installation of Fedora 12 the wireless card was visible but not activated. I did an extensive search in Internet and finally I got everything done. The card was visible and activated. I found my home network; the strength of the signal was nearly 100%.The problem is that although the card is visible and activated my browser is not working well. I can say that it is not working at all. Even now I am using other computer to write this message because Firefox cannot load any web page at all.
The strange part of the problem comes with the fact that when I open terminal window and when I am using yum everything looks OK. The speed is very low though.Does anybody have some ideas about the problem and its solution?When I use Windows on the very same computer everything is fine, the Internet speed is close to the maximum limits of my provider's speed which is 10 mbps.
View 14 Replies
View Related
Apr 30, 2011
This is more of a cosmetic issue than anything, I guess, but it's kind of annoying so I'm trying to understand the reasons for it.I currently have two computers running on my upstairs network.One is a Mac running OS X Snow Leopard (with Windows Sharing enabled and nothing else) and the other is now running Fedora (15).When I look under Browse Network in Nautilus, I see two icons for my Mac.One seems to point to my system via the IP address and the other via the short hostname. If they represented seperate network protocols, I could understand it but they're both representing SMB connections. So my question is WHY? I added the IP and hostname to Fedora's hosts file thinking it might "unify" the presentation here
View 1 Replies
View Related
Jun 1, 2010
I've been stalking the forums for the past few days trying various fixes to no avail. I'm sorry for more clutter of this issue.
Here's what I have:
emachines e725 laptop, dual core T4400 Pentium, 64bit, running Windows 7 and just installed Ubuntu 10.04.
My ethernet port works for cat internet but wireless does not. My wireless appears but when I open browser no connection.
Here is my ifconfig:
View 9 Replies
View Related
Sep 27, 2010
My problem was that I have a Logitech Squeezebox Boom Network Media Player. I was not able to use my browser to view the device BUT when it was connected to its internet account I was able to see it although not use it. I figured out that post 9000 which it used to communicate between the server software and the network player was blocked.
I looked into using iptables and also firewall but then I found an article explaining why an oracle program would not work with SELinux. I then had a quick look round SELinux and added a rule to the 'Network Port' list. I added port 9000 with a type of http_port_t.
View 2 Replies
View Related
Mar 25, 2011
I also am having this problem so any help would be appreciated.
Personally, I don't know if I have anything set up correctly. That would be something I need guidance on if anyone can offer some.
View 3 Replies
View Related