All of a sudden, none of the applications are able to connect to the internet, except the web browser. I use Google Chrome and sometimes Mozilla firefox.
There is a network proxy and I did apply the network proxy setting system wide.
Applications like Dropbox, Messenger etc stopped connecting to internet which were working very well until yesterday.
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedDoes anyone know of an application other than NetworkManager that will allow me to connected to WAN via PPPoE over WLAN?
View 4 Replies View RelatedOn this box I have Two seperate Ubuntu installations. Recently in both I seem to be having the same problem. I initially can connect to the internet as per normal and use any internet application. But after a period of time, sometimes just minutes, sometimes hours, even though the icon says connected, I cant update pages or send emails etc because there is no actual connection. My Physical connection is good I know - My Ubuntu laptop and Windows gamming PC connect fine during this period. So
Does this suggest an intermittent hardware fault or is there some thing in Ubuntu I can check to make sure that it is setup correctly and nothing has been corrupted? I am a lay PC person - I dont really want to be command prompting - Plug & Play and Point & Click is my limit.
I'm running Ubuntu 9.10 Live CD and I can't connect to the internet. I click on System --> Preferences --> Network connections and under the tab DSL I click Add. After i fill the information I click to connect to the new connection and after a while it shows me a baloon which says "Wired network: Disconnected - you are now offline".
View 1 Replies View RelatedI would like to connect a PC (it has no white IP) through Internet. It's possible to create tunnel with SSH, but I need more easy way. May be there is some service exists (like TeamViewer), so people can just run simple command on that PC?
View 3 Replies View RelatedAm not able to browse on Linux 5.please provide me step by step procedure to config internet on my Linux 5
View 3 Replies View RelatedI have a problem which is connecting automatically to my spwireless. On my windows, my schools provide me the disc which contains several .cer files and a automated batch files to copy the .cer files to the root folders. I can choose to use the other network but in using that, i have to manually connect compared to using the spwireless. Anyway, my problem is that, how do i add the .cer files and to where so when i connect to the network it will look there for the cert. Because when i manually connect, only one cer can be chosen.
View 2 Replies View RelatedI have a problem connecting to the internet using Ubuntu 9.10 . But the same works fine in Ubuntu 9.04.. First I thought it was my hardware problem and asked my friend(also was using ubuntu 9.04) to try ubuntu 9.10 but he too failed to connect....
I have an wired ADSL Modem given by my Service Provider. When I switch on my modem the router gets connected but it cannot connect me to internet...
Whenever i used to setup a new connection in Windows it would just ask me User name and password here i need to fill up something called as "Gateway" !? The connection won't be accepted unless i fill up something in there... So, what do i put in there? I'm on a LAN of 3 computers connected with a router.The router takes one wire as input from the modem(cable).
View 9 Replies View RelatedI'm trying to get internet to my old server through a laptop. The laptop is running ubuntu 10.10 and the tower is running ubuntu server 10.10 X86.
View 1 Replies View Relatedi have a Levano S10e intel atom preccessor and the net-book is not connecting wirelessly to the network. i have tried at two locations and even plugged in a exterlal wifi adapter. it wouldnt connect then either, the only way to get connected is to use a cat5 cable. here is the ifconfig output with no cat5 inserted and it not connecting to the internet.:
[Code]....
I need to reinstall my GUI but all I can access currently is a terminal, I have the encryption key and SSID but have found all the how to's I've read really confusing since following certain steps on them give me error messages, I'm connecting wirelessly to wlan0.
View 9 Replies View RelatedI just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
What is the quickest and the most elegant way to implement the following scheme:On my computer I have two browsers and two internet channels:
1. Ethernet cable internet
2. USB 3g modem/.
When I execute the first browser it uses only the cable internet and the second one uses the USB modem.
I'm using ADSL modem (not router) and I can't connect to internet. The network manager and the pppoe-setup command doesn't work. So I'm asking some of the experienced users of fedora 12 to help me setup my connection.
Details: ADSL modem with pppoe connection (working fine on win xp)
I am trying to connect to Internet using Wavecome modem with Airtel GPRS connection. I am able to successfully connect and browse the Internet using wvdial. But if I use pppd, I am getting the error message as "LCP Terminated by peer".
The exact error I am getting is pasted below.
[root@pscu1320 ppp]# pppd call gprs-wavecom
GPRS modem init: press <ctrl>-C to disconnect
Wakeup Modem
[Code].....
I had an ubuntu 10.4 box, I used it mainly for programming, virtualization & other stuff. I've installed this box about 1 month ago, working on it everyday. About 2 days ago problem appeared when I just opened up firefox for cheking my E-Mail. I typed : [URL]. & nothing appeared & I just seen the famous firefox page when a networking problem is around . I just wondered and checked the connectivity & the wire itself, but find no problem around them, while playing with firefox I just had a turned on virtualBox machine (Windows XP service Pack 3), I just checked the internet within vm & working fine, I checked my e-mail from vm (windows xp), I thought restarting the system might help to solve the problem but damn, problem didn't solved & still arounds Well, I searched through websites dedicated to linux networking & forums that might help, I did anything that faced to my brain , follow another people recipes but problem did't solved for about 3 days ! Playing with primary & alternative dns didn't help, I did my best about solving the problem, disabling ipv6 from both linux networking settings & firefox itself didn't help also . After that, I thought reinstalling the linux might help to solving the problem, but install a new version of ubuntu, 10.10, I tried it, install it but the holyshit problem still arounds ! I think this might be a bug on ubuntu distro, I tried Mint 10 & the same problem, reinstalling x64 version of fedora core & the same problem .It's interesting that the same settings for TD-8101G TP-Link working fine for my Windows XP, Windows 7 x64 & the problem is arounds just for my linux distros .As I said I checked the internet for the problem & found nothing workable for me. I thought it's better to describe the problem & maybe another people faced with that problem .
View 9 Replies View RelatedI have a CentOS server that I can connect to over my local network. The computer I'm currently on is on that same network and can access the internet. My server can not connect to the internet. The network card is obviously connecting to the network since I can access the server locally with SSH or HTTP. While in the terminal for the server, I type wget google.com and the server can not find the specified host, so this leaves me to believe it can not access the internet.
View 2 Replies View RelatedI have an AWL6075 Golden N Wireless Mini USB Adapter from Airlink, and I'm running Ubuntu 9.10. (Kernel 2.6.31-20-generic) I've learned that in order to get this to work, I needed to download this firmware update: http://launchpadlibrarian.net/373876...8192sfw.bin.gz and copy it into /lib/firmware.I have also needed to download and install the drivers at http://www.filestube.com/f76673d157e2ab6203ea/go.htmlI've even Edited my connection to make it available to all users.This is great, and it gets my internet running. Unfortunately, I seem to have to make the module, and insmod the module 8712u.ko everytime I boot up. I know I had it set in 9.04 to be able to do this on boot up, but in 9.04 I didn't have to re-make it everytime.
View 6 Replies View RelatedI had installed Ubuntu 10.04 yesterday. When I see the network tab, it shows it is connected to the web via eth0. I could download all the packages for updates.But when I try to connect to internet via Firefox, or by evolution or other software,I am unable to connect.The configuration of the ethernet card is proper as I checked that via terminal window.It is a peculiar problem, where I can download update pakages but unable to connect via browser or email client.when I ping to ubuntu.com is shows it is healthy and successful.I have a Acer dual core laptop, and connect to internet via wired lan .
View 9 Replies View RelatedI have an iBook G4 running Debian Lenny. I was wondering, is there anyway to connect to the internet while on a Windows network at school over Ethernet using smbclient? I have both GNOME 2.22 and LXDE .5 on the machine.
View 3 Replies View RelatedI setup a network bridge on pc A, with windows 7 installed on it, using windows default bridging tool. I connected computer B to computer A and Im trying to connect to the internet through the network bridge on computer A. Computer B (client) has two OS's installed, win XP and linux(tried with different distributions, didnt work). On windows XP everything is working, when i try to ping the router (after computer A) it also responds. On linux system nothing is working, and im not quite sure why.
I set up linux to receive IP adress from DHCP, which is router in this case (behind computer A), same way windows XP was configured. I decided to ask here, because I couldn't find anything on the net. My guess is windows-made bridge supports only windows-OS's but that would be kind of strange (its just a software bridge).
just recently I made the move back to Ubuntu from Windows. Upon re-installing I noticed a problem with me connecting to the internet. Previously on Windows I had updated my Ethernet Adapter driver, upon installing I would have to disable and re-enable the device to let my computer have access to the internet. My problem here is how would I go about fixing this on Ubuntu so I can have internet access on Ubuntu
View 1 Replies View RelatedHow to create some sort of network, which would mean that one computer (Lubuntu in this case) is connecting to internet through second PC (Ubuntu), which is directly connected to cable, so maybe I get some manuals and tips. The computer which is connected to internet have two LAN cards (Realtek 8139 and integrated nVidia MCP65), Realtek card is connected to the internet provider cable (internet is tied to my computer's MAC address and uses static IP).
Second computer have also a Realtek card and it's connected to first computers integrated card. Anyhow - I've put on the first computer eth1 (which is integrated MCP65) IPV4 setting to "Shared to Other Computers" and IPV6 to "Link-Local Computers" and while I was having Windows XP on the second machine, setting on it (the XP machine) DHCP (or how was it correctly called, when system automatically resolves or gets the IP and the rest what it needs?), second computer was receiving Internet signal and I could use both of them in such way.
Now the second computer is with Lubuntu and I thought that I could do the same way as did on XP - just put in Network Manager for the connection (eth0) everything to automatical and there will be internet, but there aren't and the manager shows some kind of "Automatic Ethernet" option, which after activation also doesn't do anything. What do I have to do, to make my Lubuntu machine to recognize Ubuntu's eth1 and to use it as a source for Internet?
After I've setup the ubuntu 9.10 I've found that the internet connection working incorrectly. I can ping or even connect to the internet sites with the telnet and see the raw html pages, but when I ran the software center or mozilla I have timeout error message. As a proxy settings I've setup the direct connection in both system and mozilla proxy configurations but it takes no reason. If I put the IP address instead of the domain name in the address bar of the mozilla browser then its loaded the web page correctly. It looks like this problem is relative to some system configuration of X about network (cause telnet google.com 80 working right). I'm using the dhcp connection to the D-Link DSL-504T router.
View 8 Replies View RelatedI recently set up a network of computers via Ethernet, all of which use Fedora 10. I would like to be able to get any computer on the network to hook up to the internet.(I think the solution is now figured out - see below, on page 2, "problem solved")
View 14 Replies View RelatedHow can I connect laptop to internet using GPRS enabled Phone?
Phone is Nokia 6600 slide. And laptop(Dell) has F10 installed.
I was recently asked to get a 3G ZTE 633 modem (not in stores) to connect to the internet whenever it was plugged in. I had it successfully working on my Ubuntu Gutsy Gibbon machine but it does not work on Fedora 10 which is where it is required to work. When the 3G modem is plugged in I use a Udev rule to run usb_modeswitch which changes it from being in usb storage mode to being in modem mode. This part works fine. I then run a second udev rule (on the modem device), this should run a script which connects to the internet. Unfortunately it falls over here. The script does run but it will not connect. However if I run the script manually from root it works fine. I guess that it is a permissions issue.
The device permissions are:
crw-rw---- 1 root uucp 188, 0 2009-04-26 11:31 ttyUSB0
crw-rw---- 1 root uucp 188, 1 2009-04-26 11:31 ttyUSB1
crw-rw---- 1 root uucp 188, 2 2009-04-26 11:31 ttyUSB2
The script and script folders permissions are:
drwxrwxrwx 2 root root 4.0K 2009-04-26 11:46 .
drwxr-xr-x 23 root root 4.0K 2009-04-26 11:13 ..
-rwxr-xr-x 1 root root 95 2009-04-26 11:46 run_internet
One thing to note is that there are three udev devices associated with the modem. They are ttyUSB0, ttyUSB1 and ttyUSB2. I use ttyUSB2 to talk to the modem when connecting. Here are the files. If you require any more let me know:
The first udev rule:
SUBSYSTEM=="usb", SYSFS{idProduct}=="2000", SYSFS{idVendor}=="19d2", RUN+="/usr/bin/usb_modeswitch"
The second udev rule:
SUBSYSTEM=="usb", SYSFS{idProduct}=="0031", SYSFS{idVendor}=="19d2", MODE="0666", RUN+="/outputs/run_internet"
The script:
#!/bin/bash
/bin/echo script
/usr/bin/wvdial &
cp -f /etc/telstra_resolv.conf /etc/resolv.conf
The wvdial config file:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = ATS7=60 S30=0 S0=0
Init4 = AT+CGDCONT=1,"IP","telstra.internet"
Modem Type = Analog Modem
Baud = 9600
New PPPD = no
Modem = /dev/ttyUSB2
ISDN = 0
Dial Command=ATD
Phone = *99#
Password = user@bigpond.com
Username = password
Stupid Mode = 1
So what am I missing? I suppose it is related to device permissions. Why does the "mode" command not work? With what rights do udev rules run?
I have a vista computer that is connected to a router via a ethernet cord. The router is connected to the internet.I have a computer installed with Debian that does not have a ethernet port in the back of it. Is there a way that I could connect my Debian computer to the internet through my vista?
View 5 Replies View Related