My wireless can connect to my router without a problem, but in order to do so (after boot) I must first disable networking in the Notification Area and then re-enable it. I don't mind it too much, but when other people use my computer, it's made painfully obvious to me, that this was never an issue with Windows 7 (as much as I despise MS).
View 9 RepliesDisable internal wireless card & enable external? Can I do this really by network-manager or should I use some other program. If I plug-in external both are connected. If I disable internal by laptop button, I cannot enable wireless anymore in nm-applett (external on).
View 7 Replies View RelatedI've had a host of problems since upgrading to 11.04 Natty Narwhal, so let's deal with these 1 at a time.
I've got a Hewlett-Packard Pavilion G60 laptop. Next to the power button is a handy wireless on/off button. This has always worked well with previous editions (9.04,through 10.10). first press toggles the wireless off, second press toggles it on.
Not so in 11.04. The toggle off works great, first time. But, it will not toggle back on. Not after any number of tries, not after restarting, not after booting into other OS's (9.10 and Vista) re-enabling it there and then booting back into Narwhal. to further complicate the issue, this feature bypass the network manager, so toggling the wireless off by the switch leaves me showing no wireless adapter in the network manager. I also restarted, switched from Unity to a Gnome session, but the issue still persists.
As my only network options are wireless, this has become a substantial inconvenience.
----
EDIT: so the network util is actually saying "wireless disabled by hardware switch". Also noticed it I enable it in 9.10, reboot to 11.04 (where I inevitably fail to re-enable it), then reboot into 9.10, it will initially be disabled. The key difference is in 9.10 I have the ability to enable wifi using the hardware button. It seems that 11.04 is remembering that wireless is disabled between boots. Is there a place it might be storing this value? If so, I may be able simply to set the value as enabled, since toggling that silly button isn't working.
-----
EDIT 2:
found this thread:"Wireless disabled by hardware switch" bug? - Natty
seems to be a similar issue. I'll be following how that one develops, too.
I have a strange problem with my networking under Ubuntu. When I first log in to Gnome both my network adapters are listed as "disconnected" in the network manager applet. If I right click on the notification icon and disable networking, then wait a few seconds and re enable it, it works fine.
It's happening consistently with Maverick although it seemed only temperamental with Lucid. I did a fresh Maverick install to see if it would help but it hasn't.
It's the onboard network sockets on a Gigabyte GA-X58A-UD7. I have two ports but I only use one, it doesn't seem to matter which I use. It's connected via gigabit ethernet to a Netgear router. It works fine in Windows 7 (dual boot).
It looks as though something's not quite "ready" when gnome first launches. The light on the router for the cable is off at first, and only comes on after a few seconds. It's DHCP. Same thing happened on the live USB stick (just before the isntaller) and disable/reenable made it work.
I just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
I want to make a kernel module that its function is like ifup/ifdown. However I could not find any way to do that.
View 2 Replies View RelatedI'm running Ubuntu in VMWare for a side project. I noticed when I boot up, it doesn't let me access anything externally. I have to disable network manager and re-enable it. Once done, I can hit everything fine. I'm using a static IP in network manager.
View 1 Replies View Relatedwriting a script that will enable/disable internet connection on the one of the machines in the network(be it a DNS clearing or something else).
View 3 Replies View RelatedAdapter: Ralink RT3090 802.11b/g/n Wi-Fi Basically, whenever I disable it, I can't get it to turn back on. If I hit Enable, it says device is not ready. What can I do to make it work ?
View 5 Replies View RelatedI've been experiencing a problem with Fedora in which when I enable Wireless in Fedora, Wireless networking does not work in windows. HOwever, when disabled, it works correctly. Windows claims it is "not able to find any networks to connect to"
EDIT: It seems that when wireless is disabled manually on fedora before shutdown, there are no problems in windows.
Im new to this Cent OS as well as Unix based Operating Systems. Please help me with the below requirement.My Company is a Serach based data collector from different websites like Google, Yahoo & many more..Collecting the data from the search engines is a issue for right now.. As many search engines are blocking us to search and retrive the date after some time.. Taking Google as example : Google Blocks my IP after every 30 mins of retriving.. Application is a Windows based & using Windows 2003 as the Server.. Would like to give a Dynamic IP to the Windows Server via 1st Ethernet Card & enable the 2nd Ethernet for the Internet..Eg : eth 0 = 192.168.1.1eth 1 = x.x.x.x (Public IP)I have check with few of my friends who told me to get Linux or Cent OS installed to do a interface disable after given time & enable a secondary device or virtual interface the next couple of seconds... Like eg : eth 1 = x.x.x.1 eth 2 = x.x.x.2 eth 3 = x.x.x.3 so on.. Would like the eth 1 to be down after 60 mins & eth 2 o be up & again after 60 mins of up time eth 2 down & eth 3 up.
View 6 Replies View Relatedlshw -C network:
Code:
*-network
description: Wireless interface
[code]...
When i click the network manager icon it just says under wireless networks "Wireless network is not enabled" How do i enable it?
View 9 Replies View RelatedI used the windows executable wubii installation for xubuntu 10.04 I'm not dual booting.My problem is all indications in the user interface are selected "enable networking" "enable wireless" and my wireless switch was on throughout and was connected to the internet during the installation in windows.However
Code:
sudo lshw -C network
Returns
[code]....
I am a day old in ubuntu-world, and I am having internet issues. Yesterday, after i had installed ubuntu alongside windows 7. To begin with it did not detect wireless (not networks but wireless itself), so i figured it was something to do with the adapter and came to these forums where many things were suggested. none worked. So I restarted the system for good measure and lo and behold it detected wireless networks and connected to the internet almost immediately.
Now, after a day, when i have logged in to ubuntu again, there is no wireless detected. The same problem. When I right click on the network icon in the notification area i see that Enable Networking is checked but "Enable Wireless" is darkened. There is no way to check it.
Can anybody please advise as to what to do next. I am using ubuntu 10.04 LTS (Lucid Lynx I believe).My system config is i7, 512MB ram.
my computer-toshiba satellite currently running on ubuntu 10.10 i cant connect to wireless except when im at my parents house not to sure why it was working now all of a sudden it stopped while i was using 10.04 figure when i upgraded to 10.10 it would fix it self ..didnt happen so im stumped when i right click on the satelite it the top right of my screen it shows-
-enable networking-(witch is checked)
-enable wireless-(witch willnot allow me to click it)
-enable notifications-(witch is checked)
-connection information- (wont allow)
-edit connections..-
-about-
dont know why it wont allow me to enable the wireless
I have recently installed ubuntu on my laptop. However I cannot enable the wireless on it. The card is registered and drivers are installed. From reading previous forums i can guess that its because its "Hard Blocked"" (assumptions). However the switch for it is in the on postion.
View 2 Replies View RelatedI have a LG S1 PRO, that to activate the wireless is necessary Fn + F6. How do I enable wireless on command? Since you can not activate in ubuntu with these keys.
View 9 Replies View RelatedWe're on vacation here with free wifi and I brought two laptops. The older of the two laptops running Ubuntu 10.04 and a Broadcom wireless chip suddenly wouldn't work this morning. I checked and it says wireless disabled, however wireless is grayed out when I right click on network manager. I have -no- idea what to do. I've never seen wireless just die like that. I popped open the cover but the wireless card is fine. I re-seated it, booted back up, still no sign of it.
What can I do?
I updated from Ubuntu 9 to 10 some while ago and can no longer connect to the internet via wireless. The computer is a Medion 96290 with a USB wireless card. Running "lsusb" gives code...
This tells me a driver is installed but it may not be the correct one. I copied this driver from the Windows driver file.
Network Manager shows "Wireless Network" greyed out and "wireless is disabled".
WICD shows net8187b as the installed driver and that the hardware is present.
There is a wireless switch on the keyboard which it was not necessary to use in Ubuntu 9 and is inoperative in Ubuntu 10.
I have searched through and applied many suggestions without success and have posted this problem on a couple of forums, again without success.
I have been having some problems with my wireless connection. I am having to start my computer 2 times in order for my wireless connection to work. The first time I start up, even after I enable wireless it wont connect. If I reboot immediately and enable wireless it will then connect. I would like to be able to fix this problem since it has become really annoying to me to have to boot my computer 2 times every time I turn it on. BTW Network manager shows auto-connect, however it also shows i month ago as to the last time the connections were used.
View 2 Replies View RelatedI am newbie at linux and Ubuntu and I have some problems enabling my wireless. I have spent many hours searching for solutions and couldn't find one for me (maybe don't apply it right - I am newbie). I have HP Pavilion dv6, dual boot Win7 and Ubuntu. At Win7 wireless is ok but at Ubuntu I can't enable my wireless adapter, so my laptop can't recognise any wireless network.
View 3 Replies View RelatedHow can I enable wireless injection?
[code]....
I am new to linux. I just installed linux on my PC and wanted to configure wireless network connections. I have entered SSID and mode is set to infrastructure. I don't know what is BSSID do I need to enter MAC address (of router?)?I need to connect to internet wireless can you please guide me ?
View 1 Replies View RelatedI have an Averatec 3200 laptop with a Intel PRO/Wireless 2200BG card. When I click on Network Connections, it says wireless is disabled. I checked my /var/lib/NetworkManager/NetworkManager.state file, and it said "wireless enabled=false" so I changed it to true.
It just goes back to false on reboot. I also ran rfkill unblock all, but rfkill list still shows that there is a hardware block on. The driver for this wireless card shows that it is installed. I'm not sure what to try next!I just bought this computer used, and freshly installed Ubuntu 10.10 on it, so can't say if it worked in any other distro.
i have jolicloud (i think it uses gnome) on my hp mini 110 and my internet has been working fine and everything until for some dumb reason i pushed the wireless on/off button on the front of the computer. normally on windows i would just have to push the button again but its not working with linux. how can i re-enable my wireless?
View 7 Replies View RelatedI don't use wireless on my desktop so i would like it permanently disabled...each time i boot up it's back and receving up to 80mb of data from an unknown connection via wireless (i dont use wireless) so, to avoid any weird connections to my neighboors house or some kid hacking the neighborhood driving by with a wireless router in his truck i'd like to permanently turn off wireless. this is kind of funny because i had a hard time getting wireless to work on my laptop, but this is my desktop where i do not want it. i looked it up and your forum back in 2007 said to type in iwconfig in the shell then get the nickname of the wireless card then to black list the wireless card. i did this but it didn't work, so what do i do now? i have ubuntu 9.10
View 9 Replies View RelatedI am new to Linux world. I want to configure wireless on my laptop to use ADSL.
View 9 Replies View RelatedI have a HP laptop with an onboard wifi that uses ipw3945 driver. It gets configured on boot and I can use knetworkmanager to connect to a wifi network. But I want to use an usb wifi adapter that works with the zd1211rw driver, I had use it in the past but I don't use linux since like 1 year, I forgot how to do it.
What I want is to disable the board that uses ipw3945 and use the usb adapter. I remember I used modprobe zd1211rw before, I tried it and it doesn't show any warning/error so I think I have the module, should I remove ipw3945 before loading zd1211rw? After using modprobe zd1211rw, can I use Yast or how do I configure it so I can use it with knetworkmanager?
enable WPA encryption on my wireless connection? Wireless networks are detected and listed, so the wireless card is functional in the most basic sense, however, when going to connect to any particular network,I am not given the option of entering a WPA passphrase, only WEP, and as my router is set to use WPA, this is a problem.I am trying to get this going on a fresh Karmic install on a Toshiba A15-S157 notebook.Thus far, I have found this: https://bugs.launchpad.net/ubuntu/+s...ux/+bug/315489 which would seem to relate to my problem.I looked in my logs and saw this entry: Jan 10 16:06:35 cody-laptop firmware.sh[863]: Cannot find firmware file 'agere_sta_fw.bin', and have since found that file, and have downloaded it to my desktop. It seems like this may be the solution, but how to exact it, therein lies my (momentary) problem.
View 2 Replies View Related