I've added a couple of extra repos in my x86_64 Fedora 11 KDE installation.Namely, skype and rpmfusion and no rawhide stuff.I've asked then to install skype (Skype 2.0.0.72).While I was expecting a lot of packages because skype has decided not to support 64bit environments, I have found some very weird packages within the 79 item list.
I have had some help with root password su and sudo su, but I can not find the correct password to install or remove programs. I keep getting the same message ' Authenticate' Authentication is required to install software packages. An application is attempting to perform an action that requires privileges.Authentication is required to perform this action.Then it asks for a password, I've tried enter, seacats, knoppix, user, and my root password. None of these work I seem to be a second user and not the owner.
My Linux language is very low, but I am learning, right now in order to find or try to install software I go through the startup menu> preferences> software center. Is there another way to find and install software that doesn't require and authentication password? If so where do I find out the steps to do this? Hands on is always the best teacher.
I put Ubuntu on my computer about a week ago, and have not been able to download many new programs or updates. For expmple, I'll go over to Update Manager and try to install something, but it will stop usually halfway through or near the end and show me an error message. usually, the message looks like this:FAILED TO DOWNLOAD FILE PACKAGESCheck your Internet connection
Details: Failed to fetch http://us.archive.ubuntu.com/ubuntu/...u10.2_i386.deb Hash Sum mismatch Failed to fetch http://us.archive.ubuntu.com/ubuntu/...u10.2_i386.deb Hash Sum mismatch
I recently installed Ubuntu 9.10. I was unable to connect to the Internet with Firefox or to download packets using command line or Synaptic Package Manager, or run updates. I disabled IPv6 in Firefox and am now able to browse, but I still cannot connect to repositories, I cannot download packages, I cannot run updates either.
I am thinking in starting a CentOS based distribution for communication (call center) and collaboration (IM, email, calendar) tools. What I want to find is Where to get CentOS-only base packages?Any post related with creation of a CentOS based distribution?
I'm trying to do a net install with the latest release of debian - but my ethernet card is not recognized/the drivers are not available because I have a card that requires a linux kernel version of 2.6.35. This is obviously a problem because I can't download any additional packages, and I can't update the version because I'm not able to connect to the internet. I have installed it, but it's only text (which I assume is because I could not install the graphical interface, correct me if I'm blaringly wrong here). So what can I do to install debian on my laptop and be able to use my Intel Centrino Advanced-N 620 network card?
I'm running a Knoppix Live CD, and I want to install ClamAV. What I'd really like is to download all the relevant packages and save them onto a USB pen, and then I can install it easily whenever I run the Live CD anywhere and update the definitions at my leisure without having to connect to the internet or go through remodelling Knoppix. I'm not entirely sure how to do this though, mainly because of dependencies. I would think it would be along the lines of cd'ing to the usb and running:
and then to install use dpkg, but I'm not sure how to get it to look for the dependencies in the same place:
Code:
dpkg -i clamav-base dpkg -i clamav
I'm just about to go and try it, but I thought I'd ask first to get the wisdom , but also to see if anyone else does something similar and whether they think this is a good way to achieve the goal, regardless of whether this technically works.
Right now I am using UBUNTU Hardy Haron. I just moved from windows to linux. It is very easy to install any games or software in windows. Just double click exe, next - next and finish. I want to install some mario games in my pc (ubuntu). I have downloaded tar.bz2 of it. Extracted it and configure and install-sh both are there. I already tried by ./configure. It requires g++, cpp several packages. Now my question comes. What are those packages? How to find out them? How to install them? Is there any other easy way for installation? What are different type of compilers over here?
I was wondering if there is a possibility to configure yum in such way that it would download and install packages at the same time?What i mean is that after downloading certain package it continues to download the next one but at the same time it is installing the one it has already downloaded? Is it possible in fedora? I remeber back when i was using openSUSE 11.2 that the behaviour of the installer was configurable and would let users to choose if they want to download all packages first and then install them or download a package, keep downloading next ones but install the already downloaded ones .
I was asked in a interview what are the rpm packages that are mandatory to install in order for the system to work. When for exemple the instalation program lauchs what are the required rpm packages that if only install them.. the system will work.
On Debian repo I found virtualbox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?
On Fedora repo I found VirtualBox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?
I am in the process of creating a kickstart configuration file for some RedHat 5.5 and Centos 5.5 servers (Production and test respectively).I have googled about a bit but I cannot find a good list of the bare minimum packages required for a command-line system.If anyone knows how I can trim this list down anymore it would be much appreciated. The aim of this kickstart.cfg is to get the system booted to a bare minimum required to install Chef (Server management software). Chef will then setup Apache, Ruby on rails environment etc.
All this server will need to do is, from a static IP, Host a Ruby on rails app, send emails, send data to a server on the web, accept ssh and occasionally and connect to a SMB/CIFS share This list was taken from the anaconda-ks.cfg file after a RedHat install of what I thought was a pretty minimal system onto a VM but I noticed that cups, the avahi daemonsand gam_server are installed and running which I do not believe are needed for a pure web server.I know that these types of questions are hard to answer without a complete knowledge of the operating environment and what "minimum" is in this case ("@core only? but I wanted yum damnit!")
Sometimes when we update/upgrade packages we get the restart required icon on the desktop panel which means we need to reboot for the update to complete. Is there someway to know which or what package required the reboot to happen ?
I have a headless server which I have recently clean-installed debian6 on. I want to install fluxbox (I connect remotely using No Machine). I had a similar setup with debian5 earlier but have lost the notes I made during the previous install.When I google minmal gui installs, there are different 'recipes' concerning which base packages for x are necessary e.g. xorg, x-window-system-core etc.Which packages for x should I choose (and why)?I don't use a display manager (gdm etc.), and the hardware is not so powerful (via en12000).
i have been working with fedora for a long time because i was unable to get anjuta 3 working on ubuntu as well as GTK+ 3,facing a huge list of problems after reinstalling it around 3 times and unable to get my new mouse working on GNOME. My question is will anjuta 3.,GTK+ 3.0 as well as all the required packages be able to run/installed on ubuntu?
I keep on getting this red " - " icon on my panel and I try to perform the upgrade it prompts me to do. But it says that there are 3 broken packages i need to fix with the "broken filter". How do I fix this so I can upgrade?
Debian squeeze amd_65, using gde3/gnome.I'd like to use KMyMoney, but the latest packages (v4.5.2) and not the v3.9.8/test version that's in Synaptic Package Manager.I'd rather not install every package that contains *kde* in the name, but I'm more than willing to install the minimum required to compile and run them.Trying to build kmymoney v4.5.2. After some google searches on the specific errors, I initially learned about apt-file and the find feature.
I'm unable to determine what package I need for 'Boost', and although apt-file reports that kdepimlibs5-dev is the package for gpgme - I still have no files called QGpgmeConfig.cmake or qgpgme-config.cmake, and the log still shows 'Could NOT find QGpgme'.Any pointers on what package(s) I'm missing, or other ways to determine what I need?
I have Ubuntu 9.10 installed on my laptop.And I am going to install mediaplayer from its "*.deb" file, But it requires a lot of other packages and each of those packages needs others and so on.Since I do not have internet connection on my Ubuntu and my internet connection is in Win XP, so I should download these packages and then check them in my Ubuntu and see what other packages it needs and download them and so on.
It is a very time consuming task. If I could find out what are all the required packages I could download all of them at once and then I could install them by "sudo dpkg -i *".Therefore I am wondering if there is a way to know which packages are the required ones for a typical package, my work would be much more easier.
Can someone please tell me what packages are required for compiling source on Slack 13? Something is missing in my box and I get errors, I can't figure out what it is.
I download all packages of Fedora 12 64 bit and all rpmfusion packages , all of them free and nonfree. all of them is near 20GB, I download all of them by rsync.I download them in work,In home I use Fedora12 64 bit and do not have internet connection , I copy all packages with USB flash and copy them to my Fedora box , and I want install VLC and other codecs and Nvidia driver for some games.What I must do ?I said again I do not have internet connection in home but I have all packages , free and nofree and rpmfusion packages
I installed the minimal-command line system from the kubuntu CD on my laptop, which is guess is roughly around 200mb after installation. I wish to install a Desktop Environment preferably KDE and I wanted to know how and where do I begin from? Do I need to have a working XORG prior to installation of KDE and do I also need to install Window mangers and e.t.c? What all packages/libraries and components do I need to install first? I'm really not sure where should I begin from.
Initially what I am trying to do is to have working GUI system,then later on I can install rest of the packages and software that I need, like office, GPU drivers, browser etc. Secondly,for a minimal KDE system,what metapackages are to be installed from this site? I believe kdebase, kdebase-runtime, kdebase-workspace are required. [URL]
I dont have a internet connection and I want to install VLC. I want to create a local repo for a vlc by downloading all the required packages. I tried to do by downloading all the packages from from VLC repo and create a local repo but failed. Its say this dependency failed and that dependency failed. i tried to manually install each and every dependency but still the problem exists.
I have just downloaded Slack- 13.37 using Filezilla..I downloaded from an FTP server the entire directory of Slackware - Current (32 Bits) ..There were some problems encountered:1. When I selected the entire folder in FZ , the Queue size was reported as 4 GB.2. I started downloading and after significant time , still the Queue size was reported as around 3.8 GB..I was perplexed as I have a decent bandwidth and it cannot be. To dispel my doubt , I saw the properties of the Slackware directory in which it was downloading. It showed 1.9 GB.. Is the Q size not dynamic? (Total size - Downloaded size)
3. I was on the edge of my seat as my HDD had only roughly about 4 GB ...So , the Q size was kinda misleading..In a haste , I thought I would remove 2 big installations and wiped off Openoffice as anyway I was planning to go in for libre...I moved some other files to a different partition to ensure additional space4. At the end , early in the morning I woke up and saw it had finished ..But there was a failed transfer of 1 hidden file ..There is still 450 MB left in my partition, dont know why it got omitted.5. Now I want to check the integrity of the download bfor burning to a DVD..Should I use md5 sum? I am not able to determine slackware size by googling...In fact I should have gone in for a pre compiled ISO instead of this directory! But it wasnt available yesterday..6. Is there any good download manager like DAP/ Orbit / Leechget which also gives options like turning off comp after download (useful for overnight installs)...The DW helper in Mozilla is not that good ...I want a utility to split the download into 4/5 channels and speed up the download and most importantly show a graphical menu clearly showing Speed, Size, Time left , etc similar to windows DM