Ubuntu Installation :: Unable To Install Any Packages In 9.04?
Jul 20, 2010
I was trying to install git the other day and I system shutdown because of a power cut. Later, when i tried installing git, I get the following error message. In fact, I am not able to install any .deb packages. I get the same error when I try installing them
Code:
dineshsriram@dineshsriram-desktop:~$ sudo apt-get install git
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 4 Replies
ADVERTISEMENT
Jun 1, 2011
Code...
Here are the messages appears on terminal. I can reach those URLs by browser and manually download them. But when I try to install them on terminal or via package managers, simply my attempt fails.. What would be the problem here?
View 2 Replies
View Related
Feb 16, 2010
I had installed Ubuntu 9.04 yesterday evening and made a dual boot with windows Vista. After installing the Ubuntu i opened update manager and started the updates and after half hour, some of the updates were done but the sound and multimedia package was not installed. Then i played a song and ubuntu asked me to install 2 packages for that and after i made a confirmation to that, it shows that it is unable to install the package.
View 2 Replies
View Related
Apr 22, 2010
I cannot get package installer, either Synaptic, Ubuntu Center, sodo aptitude install or plain double clicking on .deb files I have already downloaded on my PC to work.I get this:dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.When I do(even after a clear)sudo dpkg --configure. Ubuntu goes and tries to mess up with my boot configuration. wtf does installing a package have to do with messing up my lilo? I get this regardless of how I try to install the package and it makes no sense(ok, If I do this graphically, I get the same errors from a widget window)
View 2 Replies
View Related
Apr 30, 2010
Whenever I do sudo apt-get or use the Ubuntu Software Center, I can't download anything because a message comes up saying "Action requires installation of untrusted packages: The action would require the installation of packages from not authenticated sources." I've been trying to download GIMP and Thunderbird, so... I dunno what the problem is.
View 8 Replies
View Related
Jun 24, 2010
I did the UPGRADE from Karmic Koala to Lucid, and everything was going well. But now I've been having problems with the UBUNTU UPDATE tool for the last 2 weeks. Every time I try to do an update check on the packages, I get the following message:Failed to fetch http:[url]....Release Unable to find expected entry deb-src/binary-i386/Packages in Meta-index file (malformed Release file?)
Some index files failed to download, they have been ignored, or old ones used instead.I've tried changing the servers to MAIN and others, and still no way to solve it. I've also checked for other posts, but haven't found a solution yet. Here's my SOURCES LIST (gksudo gedit /etc/apt/sources.list)# See http:[url].... for how to upgrade to # newer versions of the distribution.
View 3 Replies
View Related
Jan 5, 2010
HOW TO INSTALL PACKAGES IN IT ,IT SHOWS SOME ERROR (Cannot install source packages) OR (No packages were given for installation.)
View 5 Replies
View Related
Jun 20, 2010
I try to install Ubuntu upgrade I get errors Failed to fetch http://us.archive.Ubuntu.com/Ubuntu/...ntu3.7_all.deb. could not resolve [url]....And many more similar to this one I'm using my android to type so I can't copy all of them.My log in screen is black with a cursor it started when my update failed to install properly.I use an Intel procceser, 512mb ram, intergrated Intel video card, 1.6ghz And uh 80gb harddrive.
View 9 Replies
View Related
Dec 9, 2010
im facing a very serious problem. This error pops up when i try to install/remove any package. Please see the screenshot.
View 9 Replies
View Related
Jul 16, 2015
For about the last 24 hours I have been unable to install any packages with APT. A connection to ftp3.nrc.ca can never be established.
1) Is this a problem on my end, or is this mirror down?
2) Is there a way for me to (temporarily) change mirror?
View 4 Replies
View Related
May 6, 2011
I installed Fedora fc14.i686 in a VMware player. I have been able to install many packages off the web.
First of all, I'm having this issue: I am having trouble with GIT, it keeps timing out on me. github.com[0: 207.97.227.239]: errno=Connection timed out fatal: unable to connect a socket (Connection timed out). This is happening over a 24hr period so I think its something on my end.
Also, my apache directory is not visible on my local LAN to other machines. I can browse in Fedora, however. Even the machine hosting the VM can't see my var/www/http directory. I set permissions but I have a feeling its a network issue somwhere. BTW, I can ping the Fedora VM (192.168.0.17) from other machines.
View 1 Replies
View Related
Aug 3, 2010
Running 11.3 on an Acer aspire 2920 laptop. OS is up and running as are other applications. I have been trying to install a .wmv player (for CBT), (kaffeine, MPlayer, VLC) and also crossover for linux. In all cases I get "Installation of package xxxxx rpm failed".
The system downloads without problem but the issue appears to be on the actual installation side.
View 5 Replies
View Related
Mar 7, 2010
I removed all packages starting with x and now im reinstalling them with installpkg but when I try to do this I get the following errorr
Code:
Cannot install x11-skel-7.4-i486-1.txz: external compression utility xz missing
Cannot install x11perf-1.5.1-i486-1.txz: external compression utility xz missing
Cannot install xauth-1.0.4-i486-1.txz: external compression utility xz missing
Cannot install xaw3d-1.5E-i486-1.txz: external compression utility xz missing
[Code].....
View 2 Replies
View Related
Jun 17, 2010
I cannot install java (or the restricted plugins) at all . Can anyone send me your "lucid" sources.list while I'm at it?
View 2 Replies
View Related
Jan 26, 2011
I put Ubuntu on my computer about a week ago, and have not been able to download many new programs or updates. For expmple, I'll go over to Update Manager and try to install something, but it will stop usually halfway through or near the end and show me an error message. usually, the message looks like this:FAILED TO DOWNLOAD FILE PACKAGESCheck your Internet connection
Details:
Failed to fetch http://us.archive.ubuntu.com/ubuntu/...u10.2_i386.deb Hash Sum mismatch
Failed to fetch http://us.archive.ubuntu.com/ubuntu/...u10.2_i386.deb Hash Sum mismatch
[code]....
View 4 Replies
View Related
Apr 15, 2011
I can't seem to figure out what's going on here. Whenever I use synaptic to attempt to add/remove anything I receive the following error: (Reading database... 65%dpkg: unrecoverable fatal error, aborting: files list file for package 'dnsmasq-base' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2) A package failed to install.
View 3 Replies
View Related
Oct 8, 2015
I have been using linux for about a year and have run into a new problem I am unable to solve. It started when I attempted to install some packages I needed to get VirtualBox to run VMs. I am on Jessie.
I am unable to install various packages, including gedit, aptitude etc. I do not think it is a problem with my sources.list as my laptop has the same sources.list and I am not encountering the same problems on it. Packages will not install any dependencies. -f install isn't doing anything for me.
My sources.list...
deb [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb-src [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
deb-src http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
[Code] ....
I tried to check for held packages with
userone@localhost:~$ dpkg --get-selections | grep hold
But get nothing.
sudo apt-get install -y
View 10 Replies
View Related
May 24, 2011
I am not able to install any package using software manager. I make sure that I remain online throughout the process. When I select any software package to install, a window appears that asks for the authentication code. After entering the code, no progress(in any form) takes place and the dialog box remains idle. The same thing happened when I tried to install cheese, netbeans, gcc, eclipse, build-essential, g++, codeblocks and many other such software packages. I would like to state that this problem is persisting from past two days. Earlier I was able to install software packages using software manager and I had already installed about 10 software packages before this problem actually came into notice.
View 4 Replies
View Related
Mar 23, 2011
I have a brand new Slackware 13.1 x64 installation, and I'm having problems with slapt-get.
I'm unable to upgrade existing packages or install new ones. The output in terminal is:
Code:
bash-4.1# slapt-get -i tar
Reading Package Lists... Done
The following NEW packages will be installed:
tar
[Code]....
Worth mentioning also, I managed to install Gnome from [URL] without any problems immediately prior to this error message starting to appear.
I've been using Debian and Ubuntu derivatives for the last couple of years, so I'm comfortable using the terminal and possibly doing some more advanced stuff.
View 4 Replies
View Related
Jul 24, 2010
I am looking for the following missing packages for CentOS 5.5 (64 bit OS) which are required to install Oracle 11g and Oracle 12.1.1 EBS:
When I run yum install for these packages, the yum command cannot find these versions for CentOS 5.5.
openmotif21-2.1.30-11.EL5.i3861
xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386
binutils-2.17.50.0.6-9.0.1.x86_642
* gcc-4.1.2-14.el5.x86_64
[Code].....
where I can download these for CentOS 5.5? Would I use the same rpms for Red Hat Linux or Oracle Enterprise Linux 5.5?
View 1 Replies
View Related
Nov 25, 2010
I am using the (K, X)Ubuntu 10.04 alternate installation CD in expertmode. Although package selection is offered, I am not able to choose which packages get installed during the installation process. Best regards, owiknowi
View 3 Replies
View Related
May 2, 2011
I installed natty finally on my laptop (T410 Lenovo) via an upgrade from maverick. I tested maverick thoroughly first, since I had to perform the upgrade over the network, due to issues with natty booting from DVD. The upgrade went fine to natty, the system came up and I was able to get on locally and install other packages, though I did notice from time to time a lag in network performance. I installed VNC server and started it, as well as other network related services. However, I am noticing a definite issue with the network support and I suspect the natty kernel. The configuration looks sound, ifconfig, netstat and other functions appear to display the correct information, at least what I had with maverick (which worked).
Has anyone else seen issues with natty and networking? The glass looks okay, though I am using xfce and frankly there is nothing new there to really force me to upgrade, its just that this is a new LT and if I can cold install natty right now, it will save me an upgrade later.
System configuration (lshw) is below, ipaddress removed to protect the guilty..:
description: Notebook
product: 2522AP1 ()
vendor: LENOVO
version: ThinkPad T410
serial: R8M9B2Z
width: 32 bits
capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp
[Code]...
View 4 Replies
View Related
Dec 24, 2009
I have driver DVD for ASUS motherboard. This DVD has drivers (motherboard and audio) for Linux, how do I install these packages.
When I tried installing these with package installer, it says cannot install the packge.
View 4 Replies
View Related
Mar 14, 2010
Kpackage manager is not updating. When I try to I get this error. I am un-able to install any packages.
View 8 Replies
View Related
Aug 10, 2010
I accidentally removed my network manager (gnome) from my system (via synaptic) and hence have not been able to have access to the internet to reinstall the packages. I have experimented with many commands (with help from others) in terminal with little success.
What I now did was downloaded a 'NetworkManager-0.8.0.999.tar.gz' file and a 'NetworkManager-0.8.1.tar.bz2' file (from a different comp) and have placed them onto my desktop. I have read the INSTALL instructions within and it is a tad complex for me as I am new to Linux. I understand I have to extract the files and compile them into a new folder (I think I would choose a file in the /home directory)- how would I go about doing this? Following this, I need to './configure' or 'make' or 'make install' the files
View 9 Replies
View Related
Jul 14, 2011
I'm trying to do a net install with the latest release of debian - but my ethernet card is not recognized/the drivers are not available because I have a card that requires a linux kernel version of 2.6.35. This is obviously a problem because I can't download any additional packages, and I can't update the version because I'm not able to connect to the internet. I have installed it, but it's only text (which I assume is because I could not install the graphical interface, correct me if I'm blaringly wrong here). So what can I do to install debian on my laptop and be able to use my Intel Centrino Advanced-N 620 network card?
View 14 Replies
View Related
Jan 2, 2010
I'm trying to upgrade from 8.04 to 9.10 via 8.10 etc. When I run update manager, I get this:
W:Failed to fetch [URL] Unable to find expected entry universal/binary-i386/Packages in Meta-index file (malformed Release file?), E:Some index files failed to download, they have been ignored, or old ones used instead.
and then it closes. I've unselected all the third party packages and tried various servers, but no difference. I can wget the file, but when I look at it I see entries for "universe/binary-i386/Release", but nothing for "universal" .
View 4 Replies
View Related
May 24, 2010
I tried to install some packages using "apt-get" but every time I try to install one it throws "Aborted" message, I tried several packages and combination allways with the same result.
But If I install them with Synaptics I can do it without any problem, as I know Synaptics uses apt-get to install packages so all this is a bit confusing to me .
apt-get version:
apt 0.7.25.3ubuntu9 per a i386 compiled on May 14 2010 15:33:48 I'm using Ubuntu 10.04 Lucid Lynx
Should I report some more information ?
View 7 Replies
View Related
Aug 23, 2010
how to install tar.bz2 packages.
View 9 Replies
View Related
Sep 29, 2010
I did a succesfull Alternative Installation of 10.04 yesterday and managed to load the packages that allowed me to install NetGear NG511v2 drivers. So far so good.
When I plug in a usb flashdrive it only mounts during boot-up. I know I can load a package that allows me to select ' hot mount usb drive' (or similar check box). How do I find what packages to install to give me this functionality?
Similarly my accessories tab shows Bluetooth as being available. There is no bluetooth on the laptop so how do I find out what packages I can safely remove?
The wider question is, is there a list of packages with their associated functions and associations?
I've already had a look at the lists of installed packages and available packages on my CD, but I have no idea what they do.
View 1 Replies
View Related
