Fedora Networking :: DNS Not Working With Multiple Network Connections

Mar 5, 2010

I have a machine that I'm trying to setup as a reverse web proxy. It will have two NICs, eth0 will face the public network, and eth1 will face the "internal" network (connects to a switch that goes out to the other web servers that are statically assigned a private IP address).

When both interfaces are started, I can ping hosts on the 1.2.3.0 network and the 192.168.10.0 network without problem when doing so by IP, but if I try to run a ping or nslookup command with a DNS name, it does not work. I've tried commenting out my entries in /etc/resolv.conf and adding the DNS entries in the /etc/sysconfig/network-scripts/ifcfg-ethX files directly (DNS1=x.x.x.x and DNS2=x.x.x.x), but the results are the same.

View 2 Replies


ADVERTISEMENT

Ubuntu Networking :: Multiple Network Connections On Different Networks?

Sep 20, 2010

I am total newby in Ubuntu 10.04. I have just installed it in my office where I have two networks card one connect to a router giving the internet access and the other connected to the windows based work network providing access to the work network sources. In XP everything works fine as I can keep both connections alive and have the results I want.

However although I don't know how to do it in Ubuntu 10.04. Till now I have setup the first connection directly to my router and I have internet access but I cannot set the other one. Another question is how I can force ubuntu to use the router connection as the default one when I log in.

View 5 Replies View Related

Networking :: Multiple Network Connections - Internal And Wireless

Dec 4, 2008

What I want is quite simple, I have my PC running Linux Mint 5 (Elyssa), and I would like to connect it to both an internal network, which has a file/print server, another machine and will soon host a small cluster. I also have a wireless router connected to the tinterweb.

The thing is using my ethernet I want to connect to the internal network whilst simultaneously using my wireless to deal with the internet, I want to keep the internal network off the net as it really doesn't need to be connected. I can connect to my internal quite happily and also my wireless but not both at once.

View 5 Replies View Related

Fedora Networking :: Multiple ADSL Connections To A Fedora10 Box.

May 18, 2009

I got 2 ADSL accounts from a provider, so I decided to configure a server as a gateway for my other PCs.. I created ppp0 device using pppoe-setup over eth0. Then I configured the second one as ppp1 over eth2 to the second modem.. When I finished, I used ifconfig to check the settings and I got only ppp0 and didn't see ppp1, I tried to ifup ppp1 but I still get one device with ifconfig.. The adsl-start command starts only ppp0.What should I do to get the 2 lines to work simultaneously?Are there any configuration files that need to be edited?

View 2 Replies View Related

Fedora Networking :: Network Connections In TUI While Not Available In GUI

Jun 18, 2009

once I updated , there will be no connections to Internet in GUI , while it's available in TUI . So it's wired , huh ? Before upating, it's available both in TUI and GUI, though all the time the network-manager shows no connection , in fact , there is and both GUI and CUI . Now I updated , and it can't access Internet from GUI.

View 2 Replies View Related

Networking :: Working With Multiple Network Connection?

Jul 29, 2011

I have a pc running Ubuntu 10.10 with 2 wired net card and 1 wireless card, all of them connected to a router through which connected to the internet. My question is when I launch a connection, such as ping or visit a website with browser, which one connection the system uses or both of them? Can I manually specify one connection to use? How to do it?

View 3 Replies View Related

Fedora Installation :: Network Connections Is Inactive - Cannot Set Internet Connections

May 30, 2011

I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.

View 5 Replies View Related

Fedora Networking :: Are Network Connections Counted As They Were Files

Feb 11, 2009

Code:

[bee@localhost ~]$ ulimit -a | grep files
open files (-n) 1024

that open files value set to 1024, but is it valid only for real files ("file handles/descriptors" of files on your filesystems: hd partitions / cdrom / floppy / usb devices) or does it counts also network/sockets connections? i'm just asking without a reason. it's just curiosity ... as you can see sockets with lsof, somebody like me could think connections are counted as they were "files" by ulimit too

View 9 Replies View Related

Fedora Networking :: Get Firewall To Allow All Connections To Local Network?

Aug 8, 2009

I want to write a custom rule to allow all connections to the ip addresses on my local network (192.168.2.2 through ...99) but I don't know how. I know adding a custom rule asks me to read a file and put it in "iptables" format, but I don't know how...

View 5 Replies View Related

Networking :: Multiple Mobile Broadband Connections

Jun 28, 2010

I have a question concerning mobile broadband connections: Is it possible to have multiple mobile broadband connections active at the same time?I currently have two cellphones connected to my Ubuntu box and both of them can successfully setup an Internet connection for my Ubuntu box (say connection X or connection Y), though not at the same time. Unfortunately both connections are very limited in speed (around 10kb/s each. And this is my only access to the Internet where I live). Therefore, I wish to use the two connections simultaneously to download files from the Internet (file 1 with connection X and file 2 with connection Y). Is this method of doubling my bandwidth possible in Ubuntu?

View 5 Replies View Related

Ubuntu Networking :: SFTP Multiple Simultaneous Connections

Feb 7, 2010

I really hope someone could help me with this problem. I've been stuck on this for a month.I am using the sftp command to upload files using a bash script.The problem is that it is extremely slow to do it this way. as many of you would know if you have shared server somewhere. I would use scp if remote server supported it, but it doesn't.

Anyway, If any of you have ever used FileZilla, in the Settings, if you go to "Transfers" there is a place where you can set the number of "maximum simultaneous transfers". This feature works wonders with SFTP (and FTP too). It really speeds things up. How do I accomplish this same thing with the sftp command... because I don't want to use a GUI. I don't even mind using FileZilla through the command line if possible... but it does not seem to be possible. I've been stuck on this for a month!!! I've searched everywhere and tried a lot of things with no avail...

View 6 Replies View Related

Networking :: Routing Torrents With Multiple Connections / Adapters

Jul 8, 2010

Running Fedora 13 and have it working great acting as my firewall/router/samba server etc. The problem is the connection is shared by a fair number of us and the ISP is getting annoyed with the amount of torrent traffic. One of us has access to a wireless network and we'd like to figure out how to route some of the traffic through that without having to disconnect from the current network. I put a wireless card in the fedora box and can connect to the wireless but then it messes up the current network and pretty much nothing works.

At the least if I could run a torrent client (e.g. ktorrent or whatever) on the Linux box and have it download through the wireless card on tcp port XXXXX I would be happy. The torrent client and those tcp/udp ports can be dedicated to that wireless card, the rest of the network doesn't need to get involved if that makes things simpler. Not looking for a step by step tutorial, just an explanation of what needs to be done and a shove in the right direction. My experience is limited to single WAN connections up to this point.

View 1 Replies View Related

Ubuntu Networking :: Manage Multiple Internet Connections With Different Cards?

May 25, 2010

I'm running ubuntu lucid and i was thinking in purchasing one or more extra wifi cards to try to configure my computer to manage different conections at the same time, with different isp's. The thing is that I'm not quite sure if what i want to do is actually possible.

The easiest way that crossed my mind was to try to configure a / multiple virtual machines that are redirected threw proxies to ubuntu and try to configure that each proxie port goes threw a different internet gateaway. This way i might be able to divide threw different sessions of JDownloader, installed on each virtual machine, the things i want to download. The negative aspect of this idea is having multiple jdownloader sessions will make my laptop work to almost 100% for sure...

Another thought i have was to make JDownloader manage its downloads in only one session redirecting them to my internet conections; the negative thing is that i think i will have to try to modify its source and learn java...

And well my last possible configuration i had in mind was to try to make ubuntu directly add up all my internet conections manage as if it was one. the negative thing here is that i might not be able to get multiple downloads from some sites

Well, all this where just thoughts, im struggling whether to buy another card or not to try to setup any of this configurations but im not really sure if any of them are actually possible. Is there an easy way to manage this?

I just want to take the most out of my internet conections... if i'm at college i have to options that are quite slow, adding them up with two cards would be great, i might also be able to add a third and a fourth conection. Also if i'm on a coffe and i need some bandwith i could try to make it go with an open network arround, etc.

View 1 Replies View Related

Networking :: Creating Simultaneous Network Connections To A VPN And Local Area Network?

May 31, 2010

I'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.

My OpenVPN config file (some details omitted)

--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:

[code]....

In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.

View 2 Replies View Related

Fedora Networking :: What Happens With Multiple Network Interfaces

Apr 30, 2009

What traffic goes where? Why? Any bandwidth advantage? What if one goes down?

View 4 Replies View Related

Fedora Networking :: Set Up Multiple Virt Interfaces In Network-scripts?

May 15, 2009

if I want to do eth1, eth1:0, eth1:1 etc and automatically configure them at startup where do I put that in the network-scripts?

View 2 Replies View Related

Fedora :: Control Of Network Connections/network Startup - 9 Gnome?

Jan 5, 2009

I have my box setup as a router/NAT with two different network cards. One for external connection(connected to the Cable Modem) one for internal connection(used for internal DHCP). It works perfectly when I manually activate the two interfaces after booting(both interfaces always show up as inactive after booting), then the DHCP server and firewall. I am confused, however, by which program has control of these interfaces.

First, there is the Network Configuration (System->Administration->Network), which is where I manually start the interfaces after rebooting. Both interfaces are set to "Activate when computer starts" in here.

Second, Network Device control(System->Administration->Network Device Control), which looks to be almost the same thing as the above.

Third, the NetworkManager applet(on the top bar) - both devices show up as unmanaged when I left click on this, but if I set "Controlled by Network Manager" in the "Network configuration" window(number one above), It still does not work. Can I get rid of two of these programs, or is there some way to edit the startup scripts to start my ethernet cards before the dhcp server/firewall(which is shorewall BTW)?

View 2 Replies View Related

Ubuntu Networking :: Networking Connections Not Listed In Network Manager

Aug 23, 2010

Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.

Code:

/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in

[code]....

View 4 Replies View Related

Networking :: How To Log Network Connections With Timestamp

Mar 17, 2010

Is there a way to log specific type of network connection with timestamp? I mean, if someone sends a mail through mail server, is there a way the server logs that connection with timestamp?

Example:
2010-03-17 14:10:12 <server>:25 <client1>:<port1>
2010-03-17 14:10:26 <server>:25 <client2>:<port2>
2010-03-17 14:13:09 <server>:25 <client3>:<port3>
2010-03-17 14:15:43 <server>:25 <client4>:<port4>
...
...
...

View 1 Replies View Related

Networking :: Unable To Run 2 Network Connections

Oct 29, 2010

I'm having trouble running 2 network connections on an Ubuntu 10.10 machine. My wireless connection provides my internet access and is assigned the ip 192.168.1.7 My ethernet connection provides access to a separate network containing a nas box/server. The ip address for this is 192.168.5.100 When I am only connected to the wireless network, the internet works fine. However, once I connect to the ethernet network, I lose internet access via browsers and email client I cannot ping external web servers. It doesn't appear to be an ip address conflict so I'm at a loss as to what is causing my internet connection to drop.

View 8 Replies View Related

Ubuntu Networking :: Internet Connections Is Not Working

Apr 7, 2010

I have the latest Ubuntu (9.10) desktop. My 2 cards are:

WiFi: Intel(R) Wireless WiFi Link 5100
Ethernet: Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller

Is there any way to get drivers working? My hardware switch is on and i have Ubuntu 9.10 running persistently on my usb so i can download the drivers etc. and install them.

View 7 Replies View Related

Ubuntu Networking :: Network Connections Keep Dropping?

Jan 30, 2010

Here is the layout of my network:My cable modem plugs into eth0 on my ubuntu server which acts as a firewall (shorewall) and dhcp server to my lan. A dd-wrt access point is plugged into eth1 and then a bridge connecting my xbox360 and another bridge connecting a desktop computer.Everything works pretty well, except a few times a day, my network will just shut down. The wireless on my macbook and my wife's laptop will just shut down, and if my xbox is running, it will lose connectivity. It will be down for maybe a minute or two, and then come back up like nothing ever happened.I never had this problem when I had just a dd-wrt router running everything instead of my server.When I ssh into my server afterwards and run dmesg, this is what I will get:

Code:
[398598.251548] martian source 169.254.1.255 from 169.254.1.33, on dev eth1
[398598.251565] ll header: ff:ff:ff:ff:ff:ff:00:23:69:3d:b1:82:08:00

[code]....

View 2 Replies View Related

Ubuntu Networking :: No Network Connections Using 11.04 (natty)?

Jul 8, 2011

i've installed ubuntu 11.04 on a friends Asus Eee pc 1005HA netbook. after the installation i tried to connect to the router using wireless, and when i enter the key, it fails to connect, so i tried using an Ethernet cable to connect but that doesn't work either,the network devices on the computer are:

Atheros AR8132 PCI-e fast ethernet controller
Atheros AR 9285 wireless network adapter

It lists the wireless device and the solutions to the problem, however, the solutions seem to be for Ubuntu 10.04 and also 10.10, and im not sure if it will work for 11.04 so far i have been unable to find out anything on the forums about the ethernet

View 9 Replies View Related

Networking :: How To Check Network Connections Generally

Dec 20, 2010

How to check Linux server network connections generally?

View 3 Replies View Related

Ubuntu Networking :: Eth0 Not Visible In Network Connections?

Jan 24, 2011

Since I installed ubuntu 10.04 I dont see my eth0 card in System->Preferences->Network _connections. Everything works fine but it puzzles me. In ifconfig iI just see the eth0, networking seems to be working fine, but it keeps puzzling me. Adding theinterface is no solution: add it and it doesnt show again

View 4 Replies View Related

Ubuntu Networking :: Network Config - Edit Connections

Jun 14, 2011

Using xubuntu 11.04, how do I maually give myself a static IP address and other IPv4 settings? I see the edit connections panel and saved a setting there but can't see how to use that setting. The only useable setting when I'm connected by ethernet is Auto eth0.

View 3 Replies View Related

Ubuntu Networking :: Exporting Network Connections Configuration?

Jul 4, 2011

i'm currently using ubuntu 10.04 and wanted to update to 11.04 and that means backing up all sorts of data and configuration.Regarding the wireless configuration list, i have a few with password and auto connect, i wanted to know if there is a way of saving that listconfiguration other then manually.

View 3 Replies View Related

Ubuntu Networking :: Can'tconnect To Wireless Network "Network Connections Disconnected"?

Dec 18, 2010

I have just installed Ubuntu 10.10 64bit on my laptop Toshiba Satellite A665-S6065 and I can connect to wired network but I can not connect to wireless network "Network Connections disconnected". Im following this post http://ubuntuforums.org/showthread.php?p=6183681

1. Machine Brand and Model (PC/Laptop): Toshiba Satellite A665-S6065
2. Wireless Brand, Model and Wireless Chipset:

Code:
lspci
Output:
Code:
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

[Code]...

View 3 Replies View Related

Networking :: Apache Server Setup Working Locally But Not From Outside Connections?

Feb 20, 2009

'm running on Ubuntu and I've succesfully setup apache alongside with a working php & mysql configuration - other computers connected to the LAN can access it by typing in my ip: 192.168.0.9however I would like my webserver to be accessible by all internet users...I've got my ports.conf file in the apache setup to listen on ports 80 and 8080 this is my ports.conf:PHP Code:

Listen 80
Listen 8080
Listen 2000

[code].....

View 5 Replies View Related

Networking :: Outbound Connections Not Working When Firewall Enabled - Opensuse

Jan 17, 2011

I have problem on VPS running opensuse. When I enable firewall outbound connections stop working. I have tried everything I know (not much when it comes to firewall (iptables)) but could not solve this.

Here is my ifconfig:

Code:

I used xxx.xxx.xxx.xxx to hide real address.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved