Ubuntu Networking :: Installing Newer Version Of Network-manager In Lucid - From Daily Trunk Builds Ppa
Aug 9, 2010
This is only for Lucid and Maverick, as there's no 0.8.1 builds for other releases in this ppa. Why?
Because today there seems to be a fuss about 3g usb-modems. And as of network-manager version 0.8.1, there is added support for those and some more.
The release features for current version 0.8.1, from gnome.org
Lucid ships with an earlier version and there's a ppa for daily builds (that could break, so use it on need-only-basis).
Visit the link, or google: NetworkManager daily trunk builds for ubuntu
Follow the steps on the site to add it in the repositories.
After that, it's just a simple
Code:
apt will update the needed files. Then reboot, you're done.
I strongly recommend, that you disable the PIN code query for your SIM card and enable 'Connect automatically' from:
As this seems to be more reliable than connecting/reconnecting manually from the applet list. After that, it's plug&play.
I use the modem Huawei E1820 (uses option1 driver) and for me, this update...
- gives you the ability to choose the desired network; 3G only, 3G pref., EDGE etc.
- Then it shows the signal strength and the technology used atm.; HSPA, UMTS etc.
And the main reason I installed it, bluetooth DUN support. So far it has been working great with Lucid on 32bit architecture, and I don't have to disconnect the modem between boots, or after suspend/resume.
View 9 Replies
ADVERTISEMENT
Oct 3, 2010
If I were to install the current daily build of 10.10 (cd) will there be a live update that can be installed on Oct 10? Or do I need to burn the newer 10.10 version on that day and install again by cd?
View 2 Replies
View Related
Apr 24, 2010
I have a Dell Studio 1537 Laptop with what lspci calls an "ATI Technologies Inc Mobility Radeon HD 3400" graphics card. Today I downloaded a daily image of Lucid, threw it on a USB drive, and booted it up. As I go to install the restricted driver for my graphics card, I notice that clicking on a panel item triggers the star burst effect. Come to find out that I can set desktop effects to "extra" and get smooth wobbly windows and everything.
Why are desktop effects working? I've always had to install FGLRX before, did the open source driver somehow get 3D support? Am I missing something? I almost feel like Compiz is performing better-- smoother, less tearing, etc.
View 5 Replies
View Related
Jan 4, 2011
I have HandBrake 0.9.4 installed from Slackbuilds.org, but a new version came out yesterday that I want to install, but it isn't up on slackbuilds yet. Can I install it from source without doing anything to the old install?
When I installed it from slackbuilds, the slackbuild script also installed all the external multimedia libraries that I need. If I use removepkg (or whatever the command is) to remove the old HandBrake before installing the new one, will that also remove the multimedia packages that were installed along with handbrake? They were all built into the same .tgz
On my work computer so I can't do anything with it right now anyway, so maybe a slackbuild will be up when I get home.
View 3 Replies
View Related
Sep 29, 2010
I connect to internet using GSM modem Huawei EC1262. I need to use wvdial to connect internet. I am using Lucid Lynx 64bit on this laptop. On my desktop I have upgraded to Ubuntu 10.10 64bit and my Modem is automatically Identified by Network Manager and after giving username and password I can automatically to internet without dialing throung wvdial.
Now I just want to know that how can I upgrade my network manager in Lucid to the version in Maverick. Is this even possible to do without breaking my system?
View 2 Replies
View Related
Feb 26, 2010
I added a repo from launchpad to install latest Network Manager and then installed it (version 0.8). Then I decided to rollback to Karmic's version (since 0.8 doesn't work) but failed: I removed the repo from sources.list
Then apt-get udpate
Then apt-get clean
Then apt-get install network-manager...
But still 0.8 version is downloaded and installed! How can I restore Karmic's version?
View 8 Replies
View Related
Dec 15, 2009
Im just after installing fedora 12 dual boot with windows 7. When I try to find my wireless network the laptop doesn't seem to picking it up. It works perfectly when I connect with a LAN cable.
View 2 Replies
View Related
Mar 30, 2010
After installing and uninstalling KWLAN and some other network program (I think it was wpa_supplicant GUI) the default Ubuntu network manager does not appear, and I can't connect to ANY form of Internet.
View 9 Replies
View Related
Jan 17, 2011
I've read a lot on the internet about various ways of doing this but i've been unsuccessful each time. Basically what i've done is accidently un-installed network-manager because I was having trouble staying connected on my WPA network. The easiest way of reinstalling it I know of is using the CD but I don't have a CD ROM drive and the pen drive I used to install it I no longer have.
I tried using a program called Keryx but you need python installed and from some reason this doesn't come with ubuntu 10.10. I've also downloaded the .deb packages but I still need to download 200kb which is a killer. I've also downloaded it from here too [URL] but the install file makes no sense to me as i'm not a massive linux user. One last thing reinstalling isn't really an option as i've already put a lot of time into setting up this computer.
View 8 Replies
View Related
Mar 16, 2010
I thought to uninstall Gnome Network manager since it was always asking for to connect with wireless internet but it was working fine with wired internet.I uninstalled it and installed wicd. and then for some unknown reasons the internet disappeared.Kindly let me know How can i get back network manager without having internet and make internet work on my computer.I did searched a lot on Ubuntu forums using somone's else computer but no success.So if you let me know how to approach the problem in right manner it shal be great .
View 6 Replies
View Related
Aug 5, 2010
I have downloaded a command line version of Ubuntu so I can install everything I want almost from scratch. Problem is, when I install an x display manager it wont let me login. It just flashes for a second with a cross, then returns back to the login screen...stuck in a loop."sudo startx" works but not "startx". I have tried lxdm and xdm.
View 1 Replies
View Related
Jan 22, 2011
Specifically, I want Clementine player 0.6, but the guy that installed Ubuntu on my laptop put natty narwhal alpha 1 on it (don't ask me why. I wanted maverick since its stable but he never really asked. The whole thing was kinda a surprise), and Clementine only offers downloads for Ubuntu distros up to maverick. So. Can I/is there a way I can install it anyway? Or am I forced to just use Banshee until the official Update comes out and Clementine is updated in....
View 6 Replies
View Related
May 26, 2010
I was able to go online yesterday using Ubuntu, but now I cannot. For some reason, when I ping an address, like [URL], it tells me this: ping: unknown host [URL]
I looked at ifconfig by typing it into the terminal prompt, and this is what I get:
eth0 Link encap:Ethernet HWaddr 08:00:27:77:07:0b
inet6 addr: fe80::a00:27ff:fe77:70b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:815 errors:0 dropped:0 overruns:0 frame:0
[Code].....
I cannot find network manager from my panel, how can I get back online now? I am online using a different system on my computer as I speak via Windows.
View 9 Replies
View Related
Feb 14, 2010
My wireless works without issue with network manager. However I notice that it seems to be a gui only app. That is, when I stop the display manager my laptop loses internet connectivity. The NetworkManager service is still running. Is there a commandline method of using the NetworkManager settings to start the wireless connetion?
View 14 Replies
View Related
Jul 9, 2010
Anyone know why Ubuntu has shipped with the same version of syslinux since 8.10 (Intrepid Ibex), or if there is a repository I can add to get a newer version of syslinux? The whole reason for switching from Gentoo to Ubuntu was to avoid the troubles with compiling different versions of things, but I'm needing a newer version.
View 2 Replies
View Related
Aug 4, 2010
Why does it say that the 64 bit version is not recommended for daily desktop use?I am so excited to finally have a computer of my own that if fast enough to run things like Ubuntu..
View 5 Replies
View Related
Jan 17, 2011
I have problem upgrading my ubuntu 10.04 lucid to a newer release of Ubuntu. I have done updates regularly but nothing prompt regarding upgrading Ubuntu. as mentioned in Ubuntu website, updating must result in a notification of upgrading. I want to know if there is any way to do this manually?
View 4 Replies
View Related
Jul 1, 2011
I am working on a university workstation and need to use an old version of gcc (either 4.0 or 4.1) and am currently using 4.4.2. I do not have admin rights nor can I get them so using aptitude is out of the question. I was told I should compile the old version with the current one. I am very new to this sort of thing and haven't a clue what to do or how to go about compiling my program once I have gotten the older version.
View 2 Replies
View Related
Feb 9, 2011
I have Ubuntu Server 10.04 Lucid (LTS) installed on my server (EC2 instance). I'd like to install Memcached on it. When I type "sudo apt-get install memcached" I get version 1.4.2-1ubuntu3 installed.
I know there's a newer version 1.4.5 and looking at [URL]..I found it's available in the newer version of Ubuntu (Maverick). Question: is it possible to get the newer version 1.4.5 using apt-get on my current server?
View 1 Replies
View Related
May 23, 2011
I would like to know how or given directions how to compile a newer version of synergy for PPC. Or it would be nice if someone could compile it though I want to learn how to do these things. Synergy is available for download from: [URL].
View 2 Replies
View Related
Jul 30, 2011
I'm running Mozilla Firefox 3.6.17. Can someone tell me the easiest way to upgrade to a newer version? When I search on Google, I get ;lots & lots of pages & they give me 20-different instructions on how to do it & i'm confused. Not sure which command to use (There is no "upgrade" option in the "tools" area of Firefox.) Do we upgrade in the command-line?
View 6 Replies
View Related
Sep 25, 2010
I want to install libtorrent-rasterbar version 0.14 or greater.
I want to use apt-get to do this.
It seems to be available here: [url]
How can I do it? My current libtorrent-rasterbar package is version 0.13 (I've ran apt-get update).
I DON'T want to install anything else. The last time I added a 'sid' source to my sources.list, it installed the untested version of EVERYTHING. Due to this, I had to reinstall the OS. I don't want this to happen again.
How to install libtorrent-rasterbar version 0.14+ on Debian 5?
View 9 Replies
View Related
Dec 29, 2010
there seems to be a very important bug with php 5.2.6 (mb_send_mail, [URL]). Unfortunately this affects my php applications greatly. I am currently running debian 5.0.7, with the latest updates. how to upgrade my php.
View 1 Replies
View Related
Nov 13, 2010
In a chroot einvironment i am trying to compile gcc but is says that i need a newer version of glibc, but i have the newest version of it. i think somehow it trys to use the older glibc from the ubuntu install im makeing it on.
View 1 Replies
View Related
Jan 31, 2011
I want to upgrade my software to newer version. since i do not have a yum repository what should i do? should i just change the path to a new location of installed version if 'Yes'
View 8 Replies
View Related
Mar 6, 2011
I have run the command ./wineinstall on redhat 5.2 machine and have got the error "conigure error: flex version installed is looking old.install flex 2.5.33 or newer version"
Solution for the above so that i can install wine on my linux machine.
View 1 Replies
View Related
Aug 13, 2009
I have ImageMagick 6.2.8 installed on my CentOS 5.3 (64bit) system. I want to upgrade it to a newer version, because it has nice new features I need to use in a PHP script I write for a website. I tried yum, but it did not help, it didn't have a newer version of ImageMagick. Maybe I have to use some other repositories (I use CentOS and RPMFprge repositories only) or use them some other way. I ended up with downloading ImageMagick 6.5.4 RPM from ImageMagick website (it was marked as Fedora package, there's no one for CentOS there) and tried to install it. I've got some absent dependencies, but installed them all, most from the CentOS and RPMForge repositories. Some were absent from those repositories (like jasper-libs and libtool-ltdl) and I installed them from other sources.Finally, when I tried to install ImageMagick I got this error:
-bash-3.2# rpm -Uvh --test ImageMagick-6.5.4-10.x86_64.rpm
error: Failed dependencies:
rpmlib(FileDigests) <= 4.6.0-1 is needed by ImageMagick-6.5.4-10.x86_64
rpmlib(PayloadIsXz) <= 5.2-1 is needed by ImageMagick-6.5.4-10.x86_64
I tried to install it using --nodeps, but got some "cpio: Bad magic" error. So, as far as I understand, I need to upgrade "rpm" package itself to make it working. Correct me if I'm wrong here. The current version of rpm is: bash-3.2# rpm --version RPM version 4.4.2.3
If I really have to upgrade rpm, then I'm not sure what to do. I have few questions:
1) First of all, what version of "rpm" package do I need? Because I don't want any conflicts. The latest version, as I can see on rpm.org, is 4.7.1. Will it work with CentOS 5.3?
2) Where do I get the right rpm for the rpm upgrade? If it's available at all. Rpm.org, as far as I can see, got source only, and I'm not sure CentOS uses their version of rpm. Where can I get the right rpm package, preferably as a plain .rpm file so I don't need to build it myself?
3) And after all, the most important. Wouldn't my system break at all if I upgrade rpm? I don't want to screw things up and end up with a broken system.
View 6 Replies
View Related
Nov 18, 2009
An application I'm attempting to install URL...) requires a version of gcc above 4.3.2, however the only rpms available for CentOS I can find are 4.1.2.I began trying to install a newer version via compiling the latest one from the gcc GNU site, but I started running into problems. Especially in installing newer versions of gmp and mpfr (apparently upgrading from certain versions of gmp will write over the header files, but won't change path locations for the lib files?) After examining the problem a little closer, I got worried that I was going to end up making the system unstable, so I stopped fiddling.
So my question is, is there an easier way to install a newer version of gcc? I'm not completely new to Linux, but I'm far from a master at the system, if anyone knew an easier/slightly more fool proof way of upgrading gcc.
View 2 Replies
View Related
Aug 13, 2010
I am running Ubuntu 9.04 at work and have a sudden need to install a newer version of python-support (> 0.9.0) than is currently available in the repo (0.8.7) for my Ubuntu version. Upgrading to 9.10 is not an option as we are planning to jump to 10.04 LTS in the next few months and I am unable (unwilling) to mess with a complete upgrade prior. Is it possible for me to upgrade to the newest version of python-support - or is this package OS version specific? Assuming it's possible, how might I go about the process of upgrading?
View 2 Replies
View Related
Aug 31, 2010
to install a Python module I need a more recent version of a library (libcurl) that the one available in Lenny. How should I manage it? Shall I just install it manually? Won't it mess the system to have two versions of the same library in the system?
View 1 Replies
View Related