If I were to install the current daily build of 10.10 (cd) will there be a live update that can be installed on Oct 10? Or do I need to burn the newer 10.10 version on that day and install again by cd?
View 2 Replies
This is only for Lucid and Maverick, as there's no 0.8.1 builds for other releases in this ppa. Why?
Because today there seems to be a fuss about 3g usb-modems. And as of network-manager version 0.8.1, there is added support for those and some more.
The release features for current version 0.8.1, from gnome.org
Lucid ships with an earlier version and there's a ppa for daily builds (that could break, so use it on need-only-basis).
Visit the link, or google: NetworkManager daily trunk builds for ubuntu
Follow the steps on the site to add it in the repositories.
After that, it's just a simple
Code:
apt will update the needed files. Then reboot, you're done.
I strongly recommend, that you disable the PIN code query for your SIM card and enable 'Connect automatically' from:
As this seems to be more reliable than connecting/reconnecting manually from the applet list. After that, it's plug&play.
I use the modem Huawei E1820 (uses option1 driver) and for me, this update...
- gives you the ability to choose the desired network; 3G only, 3G pref., EDGE etc.
- Then it shows the signal strength and the technology used atm.; HSPA, UMTS etc.
And the main reason I installed it, bluetooth DUN support. So far it has been working great with Lucid on 32bit architecture, and I don't have to disconnect the modem between boots, or after suspend/resume.
I have Ubuntu Server 10.04 Lucid (LTS) installed on my server (EC2 instance). I'd like to install Memcached on it. When I type "sudo apt-get install memcached" I get version 1.4.2-1ubuntu3 installed.
I know there's a newer version 1.4.5 and looking at [URL]..I found it's available in the newer version of Ubuntu (Maverick). Question: is it possible to get the newer version 1.4.5 using apt-get on my current server?
Specifically, I want Clementine player 0.6, but the guy that installed Ubuntu on my laptop put natty narwhal alpha 1 on it (don't ask me why. I wanted maverick since its stable but he never really asked. The whole thing was kinda a surprise), and Clementine only offers downloads for Ubuntu distros up to maverick. So. Can I/is there a way I can install it anyway? Or am I forced to just use Banshee until the official Update comes out and Clementine is updated in....
View 6 Replies View RelatedI am trying to build Pidgin on my Lucid install and on running configure, I get the following:
Quote:
configure: error: You must have GLib 2.4.0 or newer development headers installed to build.
If you have these installed already you may need to install pkg-config so I can find them. I tried installing pkg-config, but it's already in its newest version. I then tried going to the following website
[URL]
and downloaded and extracted glib on my computer. That changed nothing. I was hoping someone could tell me what's going on here. I just tried the this:
Quote:
sudo apt-get install libgtk2.0-0
and got
Quote:
libgtk2.0-0 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Why does it say that the 64 bit version is not recommended for daily desktop use?I am so excited to finally have a computer of my own that if fast enough to run things like Ubuntu..
View 5 Replies View RelatedI want to install libtorrent-rasterbar version 0.14 or greater.
I want to use apt-get to do this.
It seems to be available here: [url]
How can I do it? My current libtorrent-rasterbar package is version 0.13 (I've ran apt-get update).
I DON'T want to install anything else. The last time I added a 'sid' source to my sources.list, it installed the untested version of EVERYTHING. Due to this, I had to reinstall the OS. I don't want this to happen again.
How to install libtorrent-rasterbar version 0.14+ on Debian 5?
I have run the command ./wineinstall on redhat 5.2 machine and have got the error "conigure error: flex version installed is looking old.install flex 2.5.33 or newer version"
Solution for the above so that i can install wine on my linux machine.
I have ImageMagick 6.2.8 installed on my CentOS 5.3 (64bit) system. I want to upgrade it to a newer version, because it has nice new features I need to use in a PHP script I write for a website. I tried yum, but it did not help, it didn't have a newer version of ImageMagick. Maybe I have to use some other repositories (I use CentOS and RPMFprge repositories only) or use them some other way. I ended up with downloading ImageMagick 6.5.4 RPM from ImageMagick website (it was marked as Fedora package, there's no one for CentOS there) and tried to install it. I've got some absent dependencies, but installed them all, most from the CentOS and RPMForge repositories. Some were absent from those repositories (like jasper-libs and libtool-ltdl) and I installed them from other sources.Finally, when I tried to install ImageMagick I got this error:
-bash-3.2# rpm -Uvh --test ImageMagick-6.5.4-10.x86_64.rpm
error: Failed dependencies:
rpmlib(FileDigests) <= 4.6.0-1 is needed by ImageMagick-6.5.4-10.x86_64
rpmlib(PayloadIsXz) <= 5.2-1 is needed by ImageMagick-6.5.4-10.x86_64
I tried to install it using --nodeps, but got some "cpio: Bad magic" error. So, as far as I understand, I need to upgrade "rpm" package itself to make it working. Correct me if I'm wrong here. The current version of rpm is: bash-3.2# rpm --version RPM version 4.4.2.3
If I really have to upgrade rpm, then I'm not sure what to do. I have few questions:
1) First of all, what version of "rpm" package do I need? Because I don't want any conflicts. The latest version, as I can see on rpm.org, is 4.7.1. Will it work with CentOS 5.3?
2) Where do I get the right rpm for the rpm upgrade? If it's available at all. Rpm.org, as far as I can see, got source only, and I'm not sure CentOS uses their version of rpm. Where can I get the right rpm package, preferably as a plain .rpm file so I don't need to build it myself?
3) And after all, the most important. Wouldn't my system break at all if I upgrade rpm? I don't want to screw things up and end up with a broken system.
An application I'm attempting to install URL...) requires a version of gcc above 4.3.2, however the only rpms available for CentOS I can find are 4.1.2.I began trying to install a newer version via compiling the latest one from the gcc GNU site, but I started running into problems. Especially in installing newer versions of gmp and mpfr (apparently upgrading from certain versions of gmp will write over the header files, but won't change path locations for the lib files?) After examining the problem a little closer, I got worried that I was going to end up making the system unstable, so I stopped fiddling.
So my question is, is there an easier way to install a newer version of gcc? I'm not completely new to Linux, but I'm far from a master at the system, if anyone knew an easier/slightly more fool proof way of upgrading gcc.
I am running Ubuntu 9.04 at work and have a sudden need to install a newer version of python-support (> 0.9.0) than is currently available in the repo (0.8.7) for my Ubuntu version. Upgrading to 9.10 is not an option as we are planning to jump to 10.04 LTS in the next few months and I am unable (unwilling) to mess with a complete upgrade prior. Is it possible for me to upgrade to the newest version of python-support - or is this package OS version specific? Assuming it's possible, how might I go about the process of upgrading?
View 2 Replies View Relatedto install a Python module I need a more recent version of a library (libcurl) that the one available in Lenny. How should I manage it? Shall I just install it manually? Won't it mess the system to have two versions of the same library in the system?
View 1 Replies View RelatedHow to update my version of glib in order to install the latest version of Midori on slackbuilds.org - [url]
Midori relies on WebKit.
When I try to install WebKit using the slackbuild script, I receive the following error:
I don't see a newer version of glib-2.xx on slackbuilds and I'm hesitant to install from source over the currently installed version.
If there's no updated package, can anyone provide guidance regarding installing new glib from source ---
[url]
I am still running Debian Lenny and have found that the curl version 7.18 is just too outdated for my needs, I would rather not do an upgrade just yet to the stable release of squeeze. I was looking for some information on how I could install a newer version of curl and libcurl without breaking my system.
View 8 Replies View RelatedWhen a new version of open box comes out. If compile a newer version of open box will it install over the current version or will it install a separate version?
View 2 Replies View Relatedis anyone else experiencing difficulties with the latest chromium daily build? whenever i click to launch it, it appears, then closes 1 second later i know that chromium daily build is obviosly not suppost to be a reliable browser, im just curios to see if anyone else is experiencing difficulties aswell
View 3 Replies View RelatedWhere have the AMD64 daily build images gone? I show it's empty from several different networks / machines.[URL]
View 6 Replies View Relatedlooking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.
View 1 Replies View RelatedI am currently dual booting windows 7 and ubuntu linux 10.04. So I downloaded the new 11.04 version of linux onto CD and am trying to install it. How do I delete my current linux partition to install the new version? And for some reason I couldn't upgrade thought the update manager so I have to install by the CD.
View 1 Replies View Relatedi have a live cd i had sent to my address a while back but now i am outdated and would like to upgrade to the current version. is there any commands i can run to upgrade? or will i need to order another live cd
View 4 Replies View RelatedI have Fedora 11 on my machine. It comes with gcc 4.5. However, I am trying to compile code that require gcc 4.1. How do I install gcc 4.1 on my machine and still have 4.5 there as well? and how do I uninstall 4.5 gcc if I need. I was trying to use yum, but it did not work. Not sure what package I need.
View 5 Replies View RelatedIs there a simple way to delete an existing Linux Distro install so you can install a new version or distro in the partitions where a current one resides? We have several laptops, all of which are at least dual boot with Windows and with a Linux Distro. A few have Windows and two Linux Distros.
What we want and need to do, without disturbing the Windows install is simply remove a current Linux install and replace it with another install, a simple way. We cannot find a simple Partition command of eliminate install or install over existing install. Since the movement in Linux community for four years now is "easy", "simple", and "user friendly" you would think Ubuntu project would by now have a simple, low risk way of doing this. The delete and expand specific partitions method is very risky (to the O/S installs one wished to keep intact) and requires more partition study than all but a few people have interest or time to invest in.
Anyone know of a simple way to replace an install. What puzzles us is why Ubuntu has not come up with a simple command that allows users to replace one Ubuntu version with another, or at least uninstall back to a previous install when a user finds the new version tanks his system and requires hours of study to figure out how to get his basic hardware up and running.
I realize that Linux community members tend to accept criticism about as gracefully as a Republican or a Democrat but progress cannot happen without constructive or well meaning criticism. For those so tempted, please spare me the "stupid", "its easy idiot", "Works fine on my PC" or "this is the best of all possible worlds" replies.
i need to find the current version of bison flexzlib make if they are not installed in ubuntu or their version are outdated i need to install things.i hope i have posted the query at the right place if not please redirect it to the relevant thread adn let me know the path
View 4 Replies View RelatedCan I upgrade my current version of FF (3.5.7) to FF 3.6 without uninstalling it first?
View 1 Replies View RelatedIs there was a way to update from 8.04 directly to the current version without going through all the others (8.10, 9.04, etc..)?
or ...
Will it be easier with the next LTS (10.04)?
about this ....!
Will it be possible to migrate directly from 8.04 to 10.04, one LTS to another?
Today I installed rkhunter, but an old version got installed:
From the terminal
Code:
sudo apt-get install rkhunter
sudo rkhunter --versioncheck
[ Rootkit Hunter version 1.3.6 ]
Checking rkhunter version.
[Code]...
Should this thread have be posted on "Security Discussions"?
Anyone know why Ubuntu has shipped with the same version of syslinux since 8.10 (Intrepid Ibex), or if there is a repository I can add to get a newer version of syslinux? The whole reason for switching from Gentoo to Ubuntu was to avoid the troubles with compiling different versions of things, but I'm needing a newer version.
View 2 Replies View RelatedI've got Ubuntu 11.04 here and I am currently downloading oneiric ocelot iso. My question is: can I simply upgrade from my current Ubuntu version to oneiric? I've got some pretty important files on my current Ubuntu and I don't want to loose them and yet very much interested to see what oneiric ocelot.
View 1 Replies View RelatedHow do i check for updates to the current version of rkhunter and if possible upgrade to a new version?
View 2 Replies View RelatedAll am running on 2.1Beta for Skype and would like to find out if they is anyone who knows how I can upgrade from this version to the latest version.
View 1 Replies View Related
